Characterization of resin extracted from guayule (Parthenium argentatum): A dataset including GC-MS and FT-ICR MS.

Guayule (Parthenium argentatum), a shrub native to the arid region of the U.S. southwest and Mexico belonging to the Asteraceae family, is a source of high quality, hypoallergenic natural rubber with applications in pharmaceutical, tire, and food industries. Production of rubber results in a substantial amount of resin-containing residues which contain a wide variety of secondary metabolites (sesquiterpene esters, triterpene alcohols, fatty acids, etc.). In order to enhance the economic viability of guayule as an industrial crop, value-added use of the residues is needed and has the potential to reduce gross rubber production costs. The main objective of this research is the characterization of guayule resin using rapid and accurate analytical techniques to identify compounds of potential commercial value. Guayule resin is inherently complex and includes many high-molecular-weight and non-volatile compounds that are not easy to observe using traditional chromatographic techniques. The combination of two mass spectroscopy techniques: gas chromatography mass spectroscopy (GC-MS) and high-resolution Fourier transform ion cyclotron resonance mass spectroscopy (FT-ICR MS), were used to characterize the composition of the extracted resin from guayule (Parthenium argentatum). FT-ICR MS was used to characterize hundreds of compounds with over a wide range of molecular weights and degrees of aromaticity at higher levels of mass accuracy than other forms of mass spectrometry. GC-MS was used to identify volatile compounds like mono- and sesquiterpene compounds.

Roles of Co-solvents in hydrothermal liquefaction of low-lipid, high-protein algae.

Valorization of algal biomass is often limited by its low lipid content. Here, different alcohols: ethanol, isopropanol, and glycerol, were studied as co-solvents to improve the conversion efficiency of a lipid-poor microalgae, Galdieria sulphuraria, by hydrothermal liquefaction. Bio-crude oil yield increases, from 13 to 73 wt% (on dry algae basis), were attributed to the alcohols facilitating the transfer of algal protein-derived fragments from the aqueous phase into the oil phase. A series of characterization results showed that bio-crude oil formation was mainly the result of alcohols reacting with algal fragments via Maillard reactions, alkylation, and esterification, respectively. Insights into the synergistic effect of low-lipid feed and alcohol provide mechanistic support for choosing an alcohol-rich waste, crude glycerol, to improve bio-crude oil production from HTL of wastewater-grown G. sulphuraria. Promising improvements in yield and energy recovery indicates competitive economics for a low-lipid biomass waste-to-biofuel conversion technique.

Structural insights into the mechanism of oxidative activation of heme-free H-NOX from Vibrio cholerae.

Bacterial heme nitric oxide/oxygen (H-NOX) domains are nitric oxide (NO) or oxygen sensors. This activity is mediated through binding of the ligand to a heme cofactor. However, H-NOX from Vibrio cholerae (Vc H-NOX) can be easily purified in a heme-free state that is capable of reversibly responding to oxidation, suggesting a heme-independent function as a redox sensor. This occurs by oxidation of Cys residues at a zinc-binding site conserved in a subset of H-NOX homologs. Remarkably, zinc is not lost from the protein upon oxidation, although its ligation environment is significantly altered. Using a combination of computational and experimental approaches, we have characterized localized structural changes that accompany the formation of specific disulfide bonds between Cys residues upon oxidation. Furthermore, the larger-scale structural changes accompanying oxidation appear to mimic those changes observed upon NO binding to the heme-bound form. Thus, Vc H-NOX and its homologs may act as both redox and NO sensors by completely separate mechanisms.

Potable-quality water recovery from primary effluent through a coupled algal-osmosis membrane system.

A coupled algal-osmosis membrane treatment system was studied for recovering potable-quality water from municipal primary effluent. The core components of the system included a mixotrophic algal process for removal of biochemical oxygen demand (BOD) and nutrients, followed by a hybrid forward osmosis (FO)-reverse osmosis (RO) system for separation of biomass from the algal effluent and production of potable-quality water. Field experiments demonstrated consistent performance of the algal system to meet surface discharge standards for BOD and nutrients within a fed-batch processing time of 2-3 days. The hybrid FO-RO system reached water productivity of 1.57 L/m2-h in FO using seawater as draw solution; and permeate flux of 3.50 L/m2-h in brackish water RO (BWRO) and 2.07 L/m2-h in seawater RO (SWRO) at 2068 KPa. The coupled algal-membrane system achieved complete removal of ammonia, fluoride, and phosphate; over 90% removal of calcium, sulfate, and organic carbon; and 86-89% removal of potassium and magnesium. Broadband characterization using high resolution mass spectrometry revealed extensive removal of organic compounds, particularly wastewater surfactants upon algal treatment. This study demonstrated long-term performance of the FO system at water recovery of 90% and with membrane cleaning by NaOH solution.

Bio-crude oil from hydrothermal liquefaction of wastewater microalgae in a pilot-scale continuous flow reactor.

To explore the feasibility of scaling up hydrothermal liquefaction (HTL) of algal biomass, a pilot-scale continuous flow reactor (CFR) was operated to produce bio-crude oil from algal biomass cultivated in urban wastewater. The CFR system ran algal slurry (5 wt.% solids loading) at 350 °C and 17 MPa for 4 h without any clogging issues. Bio-crude oil chemistry was characterized by high-resolution Fourier transform mass spectroscopy (FT-MS), proton nuclear magnetic resonance spectroscopy (1H NMR), bomb calorimetry, and elemental analysis. Bio-crude oil yield of 28.1 wt% was obtained with higher heating values of 38-39 MJ/kg. The quality of light bio-crude oil produced from the CFR system was comparable in terms of molecular structures to bio-crude oil produced in a batch reactor.

Hydrothermal liquefaction of Galdieria sulphuraria grown on municipal wastewater.

Two strains of Galdieria sulphuraria algae, 5587.1 and SOOS, were grown on municipal wastewater to develop energy-positive treatment systems. Hydrothermal liquefaction (HTL) of 5-10 wt% algal biomass solids was conducted at 310-350 °C for 5-60 min to produce bio-crude oil. HTL product yields and energy recovery were compared to those from previous studies using G. sulphuraria grown on a modified Cyanidium medium. Total bio-crude oil yields were lower (11.2-23.0 wt%) and char yields were higher (22.6-36.4 wt%) for HTL of algae grown on actual wastewater compared with that grown on media (31.4 wt% and 4.8 wt%, respectively), indicating a potential limitation for using yields from media-based studies. High-resolution mass spectroscopy of bio-crude oil provides new insights into differences in composition based on growth media. Energy recovery in total bio-crude oil and char at 350 °C was 17-28% and 14-19%, respectively, for the 5587.1 strain, and 23-27% and 14-25%, respectively, for the SOOS strain.

Bimolecular Cross-Metathesis of a Tetrasubstituted Alkene with Allylic Sulfones.

Exquisite control of catalytic metathesis reactivity is possible through ligand-based variation of ruthenium carbene complexes. Sterically hindered alkenes, however, remain a generally recalcitrant class of substrates for intermolecular cross-metathesis. Allylic chalcogenides (sulfides and selenides) have emerged as "privileged" substrates that exhibit enhanced turnover rates with the commercially available second-generation ruthenium catalyst. Increased turnover rates are advantageous when competing catalyst degradation is limiting, although specific mechanisms have not been defined. Herein, we describe facile cross-metathesis of allylic sulfone reagents with sterically hindered isoprenoid alkene substrates. Furthermore, we demonstrate the first example of intermolecular cross-metathesis of ruthenium carbenes with a tetrasubstituted alkene. Computational analysis by combined coupled cluster/DFT calculations exposes a favorable energetic profile for metallacyclobutane formation from chelating ruthenium ß-chalcogenide carbene intermediates. These results establish allylic sulfones as privileged reagents for a substrate-based strategy of cross-metathesis derivatization.

Suboptimal Temperature Acclimation Affects Kennedy Pathway Gene Expression, Lipidome and Metabolite Profile of Nannochloropsis salina during PUFA Enriched TAG Synthesis.

In humans, dietary polyunsaturated fatty acids (PUFAs) are involved in therapeutic processes such as prevention and treatment of cardiovascular diseases, neuropsychiatric disorders, and dementia. We examined the physiology, PUFA accumulation and glycerol lipid biosynthesis in the marine microalga Nannochloropsis salina in response to constant suboptimal temperature (<20 °C). As expected, N. salina exhibited significantly reduced growth rate and photosynthetic activity compared to optimal cultivation temperature. Total fatty acid contents were not significantly elevated at reduced temperatures. Cultures grown at 5 °C had the highest quantity of eicosapentanoic acid (EPA) (C20:5n3) and the lowest growth rate. Additionally, we monitored broadband lipid composition to model the occurrence of metabolic alteration and remodeling for various lipid pools. We focused on triacylglycerol (TAG) with elevated PUFA content. TAGs with EPA at all three acyl positions were higher at a cultivation temperature of 15 °C. Furthermore, monogalactosyldiacylglycerol and digalactosyldiacylglycerol, which are polar lipids associated with chloroplast membranes, decreased with reduced cultivation temperatures. Moreover, gene expression analysis of key genes involved in Kennedy pathway for de novo TAG biosynthesis revealed bimodal variations in transcript level amongst the temperature treatments. Collectively, these results show that Nannochloropsis salina is a promising source of PUFA containing lipids.

Insight into the Mechanism of Graphene Oxide Degradation via the Photo-Fenton Reaction.

Graphene represents an attractive two-dimensional carbon-based nanomaterial that holds great promise for applications such as electronics, batteries, sensors, and composite materials. Recent work has demonstrated that carbon-based nanomaterials are degradable/biodegradable, but little work has been expended to identify products formed during the degradation process. As these products may have toxicological implications that could leach into the environment or the human body, insight into the mechanism and structural elucidation remain important as carbon-based nanomaterials become commercialized. We provide insight into a potential mechanism of graphene oxide degradation via the photo-Fenton reaction. We have determined that after 1 day of treatment intermediate oxidation products (with MW 150-1000 Da) were generated. Upon longer reaction times (i.e., days 2 and 3), these products were no longer present in high abundance, and the system was dominated by graphene quantum dots (GQDs). On the basis of FTIR, MS, and NMR data, potential structures for these oxidation products, which consist of oxidized polycyclic aromatic hydrocarbons, are proposed.