COVID-19 Infection in Ultramarathon Runners: Findings of the Ultrarunners Longitudinal TRAcking Study.

OBJECTIVE: Ultramarathon runners are a unique patient population who have been shown to have a lower rate of severe chronic medical conditions. This study aimed to determine the effect that COVID-19 infection has had on this population and their running behavior. DESIGN: The Ultrarunners Longitudinal TRAcking (ULTRA) Study is a large longitudinal study of ultramarathon runners. Questions on health status, running behavior, and COVID-19 infection were included in the most recent survey. SETTING: Community survey. PARTICIPANTS: Seven hundred thirty-four ultramarathon runners participated in the study. INTERVENTIONS: None. MAIN OUTCOME MEASURES: Personal, exercise, and COVID-19 infection history. RESULTS: 52.7% of study participants reported having been symptomatic from a COVID-19 infection, with 6.7% testing positive multiple times. Participants required a total of 4 days of hospitalization. The most common symptoms included fever (73.6%), fatigue (68.5%), sore throat (68.2%), runny nose (67.7%), and cough (67.4%). Cardiovascular symptoms, which are of particular interest in the running population, included shortness of breath (46.3%), tachycardia (44.7%), chest pain (36.2%), and wheezing (33.3%). A total of 50 subjects (6.8%) reported long COVID (symptoms lasting more than 12 weeks). CONCLUSIONS: Severe COVID-19 infection has been rare in this population of ultramarathon runners, although symptomatic infection that affects running is common. To support the well-being of this group of highly active athletes, clinicians should appreciate that cardiovascular symptoms are common and the long-term significance of these symptoms in runners is unknown. LEVEL OF EVIDENCE: Level 2 prospective study.

Technique Variation in the Surgical Treatment of Lateral Ankle Instability.

INTRODUCTION: Lateral ankle sprains are the most common type of injury to the ankle and can lead to ankle instability. There are many described techniques for the surgical treatment of lateral ankle instability. The purpose of this study is to quantify the variation in surgeon technique for lateral ankle instability treatment. METHODS: Surveys were sent to 62 orthopaedic foot and ankle surgeons regarding surgical technique for the treatment of lateral ankle instability. Clinical agreement was defined as greater than 80% agreement to assess the cohesiveness of surgical methods as described by Marx et al. Results. Response rate was 49/62 (79%). There was clinical agreement for not using bone tunnels and not using metal anchors. All other factors lacked clinical agreement. A greater average number of throws and knots (4.2 for each, range 1-6 throws, range 2-12 knots) were used by surgeons that do not believe knots cause pain compared to an average of 3.9 (range, 1-6) throws and 4.0 (range, 2-15) knots by surgeons who do believe knots cause pain. The association that surgeon who believed knots do cause pain and thus used fewer knots and throws was not statistically significant (P > .05). The preferred material by surgeons in our study are as follows: nonabsorbable braided suture (26/49, 53%), suture tape (15/49, 31%), and fiber tape (4/49, 8%). Among surgeons who use absorbable suture (34/49, 69%), there was no significant difference (P > .05) between surgeons who believe knots cause pain (23/34, 68%) and those who do not (11/34, 32%). DISCUSSION AND CONCLUSION: Among this small sample of orthopaedic foot and ankle surgeons, there is wide variation in surgical technique for lateral ankle instability treatment and little agreement on the clinical standard of care. This disagreement highlights the need for comparative outcome studies in the treatment of ankle instability. LEVEL OF EVIDENCE: Level III: Retrospective cohort study.

The Foot and Ankle in Ultramarathon Runners: Results of the Ultrarunners Longitudinal TRAcking (ULTRA) Study.

Background: The foot and ankle play a critical role in ultramarathon running. Because foot and ankle injuries are the most common location of injury in this group, proper care is essential for prevention. In this sport, small issues can become big problems over such long distances, and understanding the preventative measures taken by ultramarathon runners may provide insight for other athletes looking to avoid similar problems. The purpose of this study was to examine the routine and preventative care of the foot and ankle, as well as injury rates, in this group of high-risk athletes. Methods: The Ultrarunners Longitudinal TRAcking (ULTRA) Study is the largest known prospective longitudinal study of ultramarathon runners. In this portion of the study, participants reported general health status, running behavior and performance, as well as foot and ankle care, injuries, stretching frequency, and shoewear. Results: A total of 734 ultramarathon runners participated in the study. This group ran a median of 40.2 km per week. Overall, 71.2% of active ultramarathon runners reported a foot or ankle injury in the previous 12 months. The most common injuries reported were plantar fasciitis (36.3%), Achilles tendinitis (24.0%), nonspecific foot pain (14.0%), and stress fractures (13.4%). Sit and reach flexibility test showed that 63.7% of runners could not reach past their toes. There were no significant correlations for sit and reach flexibility or stretching frequency with injury rate. Conclusion: The high prevalence of foot and ankle injuries in ultramarathon runners does not appear to be influenced by arch type, foot strike pattern, orthotic usage, stretching behavior, or actual flexibility. A high percentage of the study runners used comfort as a shoe selection method, independent of alignment or foot strike pattern. These findings guide the clinician in shared decision making with runners about routine care, including injury prevention and shoe selection. Level of Evidence: Level II, prospective study.

Intrinsic muscles of the foot: Anatomy, function, rehabilitation.

The intrinsic muscles of the foot are underappreciated structures in evaluating and treating lower extremity dysfunction. These muscles play a crucial role in the proper function of the foot during sport activities. The functions of these muscles are not generally well understood. Intrinsic dysfunction can lead to a variety of problems. Therefore, it is important for clinicians to have a good understanding of the anatomy and function of the intrinsic foot muscles in order to properly diagnose and treat foot injuries in patients. Published research on the rehabilitation of the intrinsic muscles provides insight into the function as well as benefits of treatment. The purpose of this review is to summarize the published research on the anatomy, function, contribution to pathology, as well as rehabilitation options for the intrinsic muscles of the foot.

Contemporary Review: The Foot and Ankle in Long-Distance Running.

Distance runners represent a unique patient population. The cyclic activity associated with distance running leads to a high incidence of injury. Gait patterns, the extrinsic and intrinsic muscles of the foot and ankle, foot strike pattern, shoe wear considerations, alignment, and orthotics are also all important considerations that must be considered by the treating provider. The purpose of this work is to review relevant functional anatomy, recent studies on gait patterns in running, orthotics, and theory on how the body moves through space during running in order to better equip the clinician to treat long distance runners.

Plantar Plate Repair for Metatarsophalangeal Joint Instability of the Lesser Toes.

The plantar plate is a known stabilizer of the lesser toe metatarsophalangeal (MTP) joint. MTP instability is a known common cause of metatarsalgia, most commonly in the second toe. In the last decade, clinical staging and anatomic grading mechanisms have been published to guide the surgeons on the treatment of MTP instability; this has also led to an understanding of how plantar plate tears relate to MTP joint instability. Direct surgical repair of the plantar plate has been described, short-term outcomes have been published, and the results are not perfect, but promising with respect to patient satisfaction and pain relief.

Articular Cartilage of the Syndesmosis: Avoiding Iatrogenic Cartilage Injury During Syndesmotic Fixation.

BACKGROUND: The optimal surgical management of syndesmosis injuries consists of internal fixation between the distal fibula and tibia. Much of the available data on this joint details the anatomy of the syndesmotic ligaments. Little is published evaluating the distribution of articular cartilage of the syndesmosis, which is of importance to minimize the risk of iatrogenic damage during surgical treatment. The purpose of this study is to describe the articular cartilage of the syndesmosis. METHODS: Twenty cadaveric ankles were dissected to identify the cartilage of the syndesmosis. Digital images of the articular cartilage were taken and measured using calibrated digital imaging software. RESULTS: On the tibial side, distinct articular cartilage extending above the plafond was identified in 19/20 (95%) specimens. The tibial cartilage extended a mean of 6 ± 3 (range, 2-13) mm above the plafond. On the fibular side, 6/20 (30%) specimens demonstrated cartilage proximal to the talar facet, which extended a mean of 24 ± 4 (range, 20-31) mm above the tip of the fibula. The superior extent of the syndesmotic recess was a mean of 10 ± 3 (range, 5-17) mm in height. In all specimens, the syndesmosis cartilage did not extend more than 13 mm proximal to the tibial plafond and the syndesmotic recess did not extend more than 17 mm proximal to the tibial plafond. CONCLUSION: Syndesmosis fixation placed more than 13 mm proximal to the tibial plafond would have safely avoided the articular cartilage in all specimens and the synovial-lined syndesmotic recess in most. CLINICAL RELEVANCE: This study details the articular anatomy of the distal tibiofibular joint and provides measurements that can guide implant placement during syndesmotic fixation to minimize the risk of iatrogenic cartilage damage.

Nitinol, Stainless Steel, and Titanium Kirschner Wire Durability.

Kirschner wires (K wires) are a common fixation device in foot and ankle surgery, particularly in lesser-toe fixation. Fatigue failure is a known complication of this fixation. The material properties of the K wire are a factor in the strength and durability of the wire. The purpose of this study is to compare the durability of K wires made of stainless steel, titanium, and Nitinol. Ten samples each of stainless steel, titanium. and Nitinol underwent cyclic durability testing using a rotating beam approach, and S-N curves (applied stress vs the number of cycles to failure) were generated. The results demonstrate that, generally, Nitinol K wires have a shorter life for the same applied stress than the stainless steel or titanium wires. Titanium had a longer life at low stresses compared with stainless steel, and stainless steel had a longer life at higher stresses. This study provides comparative durability data for K wires made of different metals, which have not been previously reported. Although there was a statistically significant difference in durability for wires used in K wire fixation, all 3 metal types are reasonable choices for temporary K wire fixation.Levels of Evidence: Level 5: Mechanical study.

Incidence of Lower Extremity Injury in the National Football League: 2015 to 2018.

BACKGROUND: Lower extremity injuries are the most common injuries in professional sports and carry a high burden to players and teams in the National Football League (NFL). Injury prevention strategies can be refined by a foundational understanding of the occurrence and effect of these injuries on NFL players. PURPOSE: To determine the incidence of specific lower extremity injuries sustained by NFL players across 4 NFL seasons. STUDY DESIGN: Descriptive epidemiology study. METHODS: This retrospective, observational study included all time-loss lower extremity injuries that occurred during football-related activities during the 2015 through 2018 seasons. Injury data were collected prospectively through a leaguewide electronic health record (EHR) system and linked with NFL game statistics and player participation to calculate injury incidence per season and per 10,000 player-plays for lower extremity injuries overall and for specific injuries. Days lost due to injury were estimated through 2018 for injuries occurring in the 2015 to 2017 seasons. RESULTS: An average of 2006 time-loss lower extremity injuries were reported each season over this 4-year study, representing a 1-season risk of 41% for an NFL player. Incidence was stable from 2015 to 2018, with an estimated total missed time burden each NFL season of approximately 56,700 player-days lost. Most (58.7%) of these injuries occurred during games, with an overall higher rate of injuries observed in preseason compared with regular season (11.5 vs 9.4 injuries per 10,000 player-plays in games). The knee was the most commonly injured lower extremity region (29.3% of lower body injuries), followed by the ankle (22.4%), thigh (17.2%), and foot (9.1%). Hamstring strains were the most common lower extremity injury, followed by lateral ankle sprains, adductor strains, high ankle sprains, and medial collateral ligament tears. CONCLUSION: Lower extremity injuries affect a high number of NFL players, and the incidence did not decrease over the 4 seasons studied. Prevention and rehabilitation protocols for these injuries should continue to be prioritized.

Feasibility of Transosseous Nonarticular Fixation of Lisfranc Injuries.

BACKGROUND: The optimal techniques for Lisfranc open reduction and internal fixation techniques remain debated. The purpose of the current study was to describe the joints involved in Lisfranc fixation and to determine if nonarticular transosseous internal fixation would be possible. METHODS: Twenty cadaver Lisfranc joints were dissected and the articular cartilage was quantified by calibrated digital imaging software. Utilizing CT data, a computational model of the foot was developed and the mean joint surface was mapped and nonarticular screw paths between bones was determined. RESULTS: For the medial-middle cuneiform (C1-C2) connection, 27.3% of the lateral face of C1 and 43.7% of the medial face of C2 was articular cartilage. Three variations of articular morphology were observed on C1 and 2 on C2. From the 3D models, it was determined that a joint-sparing, transosseous screw trajectory was possible between C1 and the second metatarsal and between C1 and C2. These screw paths were large enough to accommodate clinically useful screw diameters (>5 mm). The screw trajectories were roughly perpendicular to the long axis of the foot and take a plantar-medial to dorsal-lateral orientation. CONCLUSION: The articular surface of the Lisfranc joint was quantified for the first time and may be smaller than some surgeons realize. This study demonstrated the orientation required to minimize articular damage. CLINICAL RELEVANCE: The clinical significance of the current study was that a nonarticular screw trajectory was possible, and this information may help guide the placement of these screws.

Synthetic Turf: History, Design, Maintenance, and Athlete Safety.

CONTEXT:: Synthetic turf has become an increasingly common playing surface for athletics and has changed dramatically since its introduction more than 50 years ago. Along with changes to surface design, maintenance needs and recommendations have become more standardized and attentive both to upkeep and player-level factors. In particular, synthetic turf maintenance as it relates to athlete health and safety is an important consideration at all levels of play. EVIDENCE ACQUISITION:: A literature search of MEDLINE and PubMed for publications between the years 1990 and 2018 was conducted. Keywords included s ynthetic turf, artificial turf, field turf, and playing surface. Additionally, expert opinion through systematic interviews and practical implementation were obtained on synthetic turf design and maintenance practices in the National Football League. STUDY DESIGN:: Clinical review. LEVEL OF EVIDENCE:: Level 5. RESULTS:: Synthetic turf has changed considerably since its inception. Playing surface is a critical component of the athletic environment, playing a role both in performance and in athlete safety. There are several important structural considerations of third-generation synthetic turf systems currently used in the United States that rely heavily on strong and consistent maintenance. A common misconception is that synthetic turf is maintenance free; in fact, however, these surfaces require routine maintenance. Whether athletes experience more injuries on synthetic over natural surfaces is also of interest among various levels and types of sport. CONCLUSION:: Modern synthetic turf is far different than when originally introduced. It requires routine maintenance, even at the level of local athletics. It is important for sports medicine personnel to be familiar with playing surface issues as they are often treating athletes at the time of injury and should maintain a level of awareness of contemporary research and practices regarding the relationships between synthetic turf and injury.

The Effect of Pitch Variation and Diameter Variation on Screw Pullout.

Introduction: There are many screw and thread designs commercially available to surgeons for bone fixation. There is a paucity of literature on comparative mechanical properties of various screw and thread designs including variable pitch screws, and tapered screws. This purpose of this study was to test whether varying a screws thread pitch and/or tapering a screws core diameter alters the mechanical performance of screws. Methods: A mechanical pullout test was performed on 4 different screw designs, including a variable pitch screw, a constant pitch screw, and variations of these in a straight and tapered screw design. Three-dimensional printing technology was used to manufacture the metal screws in order to control for as many variables as possible. Results: The pullout strength of the constant pitch screws (304.9 ± 25.3 N, P < .001) was significantly greater than the variable pitch screws (259.7 ± 23.4 N). The pullout strength was also significantly greater for screws with a tapered diameter (305.4 ± 24.1 N) than a constant diameter (259.1 ± 23.5N, P < .001). Tapered diameter variable pitch screws had the largest stiffness overall, which was statistically significant against all other groups (P ⩽ .001). Conclusion: The pullout strength is significantly greater for screws with a tapered diameter than a constant diameter and greater for screws with a constant pitch than for a variable pitch. Results of stiffness testing is mixed depending on the screw taper. The clinical significance of this study is that it provides data on the effects that thread design and tapering have on the pullout strength of screws. Levels of Evidence: Level V: Mechanical study.

Gastrocnemius Contracture in Patients With Rheumatoid Arthritis.

BACKGROUND: Rheumatoid arthritis is a chronic disease affecting multiple joints of the body. More than 90% of patients affected by rheumatoid arthritis develop foot or ankle pain over the course of their disease. The purpose of the current study was to report ankle dorsiflexion in rheumatoid arthritis patients as well as a control group utilizing a validated measurement instrument. METHODS: Using a previously validated device, 70 patients presenting with rheumatoid arthritis and 70 controls were measured for ankle range motion and isolated gastrocnemius contractures. Clinical and goniometer measurement of ankle range of motion was also performed. RESULTS: The rheumatoid arthritis group had a mean dorsiflexion of 12.3 degrees compared to a mean of 17.3 degrees in the control group ( P < .05). The difference in dorsiflexion was significantly less utilizing a goniometer than using the validated device, which may be due to measurement technique and external landmarks ( P < .05). CONCLUSION: Patients with rheumatoid arthritis had less ankle dorsiflexion than the control group. The clinical significance of this study is that it provides evidence that patients with rheumatoid arthritis have decreased ankle dorsiflexion even despite a lack of foot and ankle pain. In light of the high lifetime incidence of foot and ankle pain in these patients, this study provides some evidence that the decreased ankle dorsiflexion may be a contributing factor in foot and ankle pain, but further studies are needed. LEVEL OF EVIDENCE: Level II, prospective cohort study.

Ball and Socket Ankle: Mechanism and Computational Evidence of Concept.

The ball and socket ankle joint is a morphologically abnormal joint characterized by rounding of the articular surface of the talus. Other than anecdotal observation, little evidence has been presented to describe the development of this deformity. The purpose of the present study was to review ankle and subtalar joint mechanics and to kinematically examine the functional combination of these joints as a mechanism of the ball and socket ankle deformity. We reviewed functional representations of the ankle joint, subtalar joint, and ball and socket ankle deformity. A computational study of joint kinematics was then performed using a 3-dimensional model derived from a computed tomography scan of a ball and socket deformity. The joint kinematics were captured by creating a "virtual map" of the combined kinematics of the ankle and subtalar joints in the respective models. The ball and socket ankle deformity produces functionally similar kinematics to a combination of the ankle and subtalar joints. The findings of the present study support the notion that a possible cause of the ball and socket deformity is bony adaptation that compensates for a functional deficit of the ankle and subtalar joints.

Three-Dimensional Printing and Surgical Simulation for Preoperative Planning of Deformity Correction in Foot and Ankle Surgery.

A paucity of published data is available describing the methods for the integration of 3-dimensional (3D) printing technology and surgical simulation into orthopedic surgery. The cost of this technology has decreased and the ease of use has increased, making routine use of 3D printed models and surgical simulation for difficult orthopedic problems a realistic option. We report the use of 3D printed models and surgical simulation for preoperative planning and patient education in the case of deformity correction in foot and ankle surgery using open source, free software.

Plantar Plate Repair for Lesser Metatarsophalangeal Joint Instability.

BACKGROUND: Lesser metatarsophalangeal (MTP) joint instability is a common cause of forefoot pain. Advances in operative technique and instrumentation have made it possible to anatomically treat plantar plate tears through a dorsal approach. Our goal was to evaluate the subjective, functional, and radiographic outcomes of plantar plate repair (PPR) from a dorsal approach. METHODS: A prospective case series was performed evaluating the results of PPR in 97 feet with 138 plantar plate tears. Patients underwent PPR from a dorsal approach with a Weil osteotomy. We followed patients at regular intervals for 12 months and collected data preoperatively and postoperatively with respect to visual analog scale (VAS) scores, MTP range of motion (ROM), paper pull-out test, American Orthopaedic Foot & Ankle Society (AOFAS) scores, satisfaction, and radiographic measures. RESULTS: Eighty percent of patients scored "good" to "excellent" satisfaction scores at 12 months. The mean VAS pain score preoperatively was 5.4/10, and postoperatively was 1.5/10. The mean AOFAS scores increased from 49 to 81 points following surgery. The mean MTP ROM preoperatively was 43 degrees and postoperatively 31 degrees. Forty-two percent of toes passed the paper pull out test prior to surgery and 54% at 12 months. Mean metatarsal shortening was 2.4/3.1/1.2 mm for the second, third, and fourth metatarsals, respectively. The mean MTP joint angles preoperatively were 2/4.9/-1.3 degrees and postoperatively were 7.4/9.6/0.2 degrees, respectively, for the second, third, and fourth MTP joints. CONCLUSION: We found that the plantar plate could be repaired through a dorsal approach with reliable outcomes. PPR was a viable option to anatomically restore the ligamentous support in the unstable lesser MTP joint. LEVEL OF EVIDENCE: Level IV, retrospective case series.

Results of the Gravity Stress Examination in the Normal Patient Population.

In ankle fractures, the result of a gravity stress radiographic examination is clinically used to determine if a patient may need surgical intervention. The purpose of this study is to report the results of a gravity stress examination in the normal patient population. Fifty study participants were prospectively enrolled and complete ankle radiographs were obtained, including a nonweightbearing gravity stress examination. The mean medial clear space in the gravity stress view was 3.6 mm. This compared to a mean medial clear space of 3.3 mm, and 3.1 mm in the anteroposterior and mortise views. These values were statistically significantly different from the gravity stress view ( P = .006 and P < .001, respectively). There was no statistically significant difference between the talar tilt as measured on the anteroposterior and gravity stress radiographs ( P = .22). No participant had medial clear space widening with gravity stress to more than 5.2 mm or an increase in their widening by more than 0.2 mm. In conclusion, this study helps guide surgeons by providing normative radiographic data for a gravity stress examination and supports the notion that measureable medial clear space widening or talar tilt on gravity stress examination represents an unstable injury. LEVELS OF EVIDENCE: Level II: Prospective.

Gastrocnemius Contracture in Patients With and Without Foot Pathology.

BACKGROUND: Several studies report performing a recession of the gastrocnemius tendon as surgical treatment of foot and ankle pain related to an isolated gastrocnemius contracture. Few report ankle range of motion using a validated measurement device or report a control group. All previous studies reporting measurements using a validated device have been small in number. METHODS: Using a previously validated device, 66 patients presenting with foot or ankle pain and 66 controls were measured for ankle range of motion and isolated gastrocnemius contractures. Clinical and goniometer measurement of ankle range of motion was also performed. RESULTS: The foot and ankle pain group had a mean dorsiflexion of 11.6 degrees compared with a mean of 17.2 degrees in the control group (P < .0001). No patients in either group had less than 15 degrees of motion with the knee flexed. The difference in dorsiflexion was less using a goniometer than using the validated device, which may be due to measurement technique and external landmarks. CONCLUSION: Patients with foot and ankle pain had less ankle dorsiflexion than the control group. This is the largest study to date using a validated measurement device as well as a control group and supports the findings of previous authors. LEVEL OF EVIDENCE: Level II, prospective cohort study.

The Reverse Ludloff Osteotomy for Bunionette Deformity.

UNLABELLED: Background The typical bunionette deformity often presents as pain over the lateral margin of the fifth metatarsal head. There have been numerous operative treatments described for this pathology. The purpose of this study was to evaluate the results after a reverse Ludloff osteotomy in cases of severe bunionette deformities. Methods Between 2008 and 2012, 16 patients received a reverse Ludloff osteotomy of the fifth metatarsal due to a symptomatic type II or III bunionette that failed nonoperative treatment. We retrospectively reviewed charts, radiographic images, postoperative AOFAS (American Orthopaedic Foot and Ankle Society) lesser toe scores, and the EQ-5D at a mean of 41.9 months (range, 31-74 months) of follow-up. Additionally, limitation in activities of daily living, pain, and patient satisfaction were assessed. Results At latest follow-up, the mean AOFAS lesser toe score was 86.6 points and the mean EQ-5D score was 14.1. Fifteen patients had no or only little limitations. Fifteen out of 16 patients were satisfied or predominantly satisfied. Radiographic analysis showed for type II deformities a correction of the lateral bowing from 8.1° down to 0.67° (P < .001). The fourth-fifth intermetatarsal angle (4-5 IMA) improved from a mean of 13.2° to a mean of 5.2° (P < .001). The length of the fifth metatarsal was unchanged (P > .05). There were no observed complications, and no revision was necessary. Conclusion In the present study, the reverse Ludloff osteotomy had a high satisfaction rate and no complications. It provided radiographic correction of the deformity and may be considered in the surgical treatment of severe bunionette deformities. LEVELS OF EVIDENCE: Therapeutic, Level IV: Case series.

Biomechanical Evaluation of Strength and Stiffness of Subtalar Joint Arthrodesis Screw Constructs.

BACKGROUND: Subtalar arthrodesis is a common treatment for end-stage subtalar joint arthritis as well as many other clinical problems. The best method of subtalar arthrodesis fixation is unknown. The purpose of this study was to compare the strength of subtalar arthrodesis fixation methods including a single posterior screw (SP), 2 posterior minimally divergent screws (MD) and a 2 screw highly divergent screw (HD) construct for subtalar arthrodesis. METHODS: A biomechanical study was performed including the three different screw configurations (SP, MD, HD). These surrogate bone specimens were subjected to applied inversion and eversion torques about the subtalar joint axis on a servo-hydraulic load frame. Torsional stiffness of the construct and the maximum torque for each configuration were measured. Additionally, a cadaver study was performed using 5 fresh-frozen cadaver specimens. The perpendicular distance from the divergent screw guide-wire placement was measured from anatomic structures. RESULTS: The HD screw configuration was found to have the highest torsional stiffness in both inversion and eversion, followed by the MD construct and then the SP construct. Similarly, the HD construct had the highest maximum torque versus the MD and SP constructs. All between-group differences were statistically significant (P < .05). The mean distance from key structures to the divergent screw included the sural nerve (13 mm), peroneus brevis tendon (18 mm), tibialis anterior tendon (8 mm), and tibialis posterior tendon (21 mm). CONCLUSION: This biomechanical and cadaver study supports the use of 2 screws for fixation of subtalar arthrodesis over a single posterior screw. Additionally, we describe a biomechanically superior and potentially safe, alternative 2-screw divergent construct. CLINICAL RELEVANCE: This study gives biomechanical support for 2 screw, divergent fixation of subtalar arthrodesis or a single over a single screw or two screw minimally divergent construct.