3D printing from transesophageal echocardiography for planning mitral paravalvular leak closure - feasibility study.

Introduction: Transcatheter closure of paravalvular leak (PVL) is still a demanding procedure due to the complex anatomy of PVL channels and risk of interference between the implanted occluder and surrounding structures. Efforts are made to improve procedural outcomes in transcatheter structural heart interventions by establishing treatment strategy in advance with the use of 3D-printed physical models based on data obtained from cardiac computed tomography (CT) studies. Aim: In this feasibility study 3D printing of PVL models based on data recorded during transesophageal echocardiography (TEE) examinations was evaluated. Material and methods: 3D-TEE data of patients with significant PVL around mitral valve prostheses were used to prepare 3D models. QLab software was used to export DICOM images in Cartesian DICOM format of each PVL with the surrounding tissue. Image segmentation was performed in Slicer, a free, open-source software package used for imaging research. Models were printed to actual size with the Polyjet printer with a transparent, rigid material. We measured dimensions of PVLs both in TEE recordings and printed 3D models. The results were correlated with sizes of occluding devices used to close the defects. Results: In 7 out of 8 patients, there was concordance between procedurally implanted occluders and pre-procedurally matched closing devices based on 3D-printed models. Conclusions: 3D-printing from 3D-TEE is technically feasible. Both shape and location of PVLs are preserved during model preparation and printing. It remains to be tested whether 3D printing would improve outcomes of percutaneous PVL closure.

Quality of Life 6 Months after COVID-19 Hospitalisation: A Single-Centre Polish Registry.

BACKGROUND: The COVID-19 pandemic, which affected the entire global population, had an impact on our health and quality of life. Many people had complications, were hospitalised or even died due to SARS-CoV-2 infection. The health systems of many countries had to radically change their way of functioning and scientists around the world worked intensively to develop a vaccine for the SARS-CoV-2 virus. AIM: The aim of this work is to assess the quality of life of patients who were hospitalised for COVID-19, using the SF-36 questionnaire. METHODS: Between May and August 2022, we conducted a telephone assessment of quality of life in patients who were hospitalised for COVID-19 at the Temporary Hospital in Pyrzowice (Silesia, Poland), between November 2021 and January 2022. RESULTS: Quality of life was significantly lower in women (p = 0.040), those with DM2 (p = 0.013), CKD (p = 0.041) and the vaccinated (p = 0.015). CONCLUSIONS: People with chronic kidney disease, diabetes mellitus and women had a lower quality of life after COVID-19 disease. However, people who were vaccinated for SARS-CoV-2 had a lower quality of life than non-vaccinated people did. This is possibly due to the higher mean age, and probably the higher disease burden, in the vaccinated group.

Mitral Paravalvular Leak 3D Printing from 3D-Transesophageal Echocardiography.

BACKGROUND: Paravalvular leaks can be detected in almost 15% of patients after mitral valve prosthesis implantation. This complication can result in congestive heart failure and hemolysis. Despite advancements in non-invasive imaging, percutaneous closure of paravalvular leaks is not always successful. Therefore, efforts are made to improve treatment outcomes by using 3D-printed models of defects as pre-procedural support for interventional cardiologists. METHODS: Retrospectively, 3D-transesophageal echocardiography recordings of 8 patients with clinically significant mitral paravalvular leaks were analyzed. Qlab Software was used to export DICOM images of each paravalvular leak channel, including surrounding tissue. Image segmentation was performed in 3D Slicer, a free, open-source software package used for imaging research. Models were printed to actual size with the poly jet Stratasys Objet 30 printer with a transparent, rigid material. RESULTS: Duration of model preparation and printing, as well as the total cost, was calculated. Mean total time of model preparation was 430.5 ± 196 minutes. CONCLUSION: 3D-printing from 3D-transesophageal echocardiography is technically feasible. Both shape and location of paravalvular leaks are preserved during model preparation and printing. It remains to be tested if 3D-printing would improve outcomes of percutaneous paravalvular leaks closure.

Mallampati Score Is an Independent Predictor of Active Oxygen Therapy in Patients with COVID-19.

Mallampati score has been identified and accepted worldwide as an independent predictor of difficult intubation and obstructive sleep apnea. We aimed to determine whether Mallampati score assessed on the first patient medical assessment allowed us to stratify the risk of worsening of conditions in patients hospitalized due to COVID-19. A total of 493 consecutive patients admitted between 13 November 2021 and 2 January 2022 to the temporary hospital in Pyrzowice were included in the analysis. The clinical data, chest CT scan, and major, clinically relevant laboratory parameters were assessed by patient-treating physicians, whereas the Mallampati score was assessed on admission by investigators blinded to further treatment. The primary endpoints were necessity of active oxygen therapy (AOT) during hospitalization and 60-day all-cause mortality. Of 493 patients included in the analysis, 69 (14.0%) were in Mallampati I, 57 (11.6%) were in Mallampati II, 78 (15.8%) were in Mallampati III, and 288 (58.9%) were in Mallampati IV. There were no differences in the baseline characteristics between the groups, except the prevalence of chronic kidney disease (p = 0.046). Patients with Mallampati IV were at the highest risk of AOT during the hospitalization (33.0%) and the highest risk of death due to any cause at 60 days (35.0%), which significantly differed from other scores (p = 0.005 and p = 0.03, respectively). Mallampati IV was identified as an independent predictor of need for AOT (OR 3.089, 95% confidence interval 1.65−5.77, p < 0.001) but not of all-cause mortality at 60 days. In conclusion, Mallampati IV was identified as an independent predictor of AOT during hospitalization. Mallampati score can serve as a prehospital tool allowing to identify patients at higher need for AOT.

Quality of life after percutaneous paravalvular leak closure - a prospective registry.

Introduction: Presence of paravalvular leaks (PVLs) can lead to heart failure, which decreases quality of life (QoL). Percutaneous closure is becoming the first-line treatment of PVLs, but whether such a procedure could improve QoL in these patients has never been examined. Aim: To examine changes in scores of the Minnesota Living with Heart Failure Questionnaire (MLHFQ) and Kansas City Cardiomyopathy Questionnaire (KCCQ) after percutaneous PVL closure. Material and methods: Forty subjects with heart failure symptoms and at least moderate PVL were included in this prospective registry. QoL was assessed at baseline and during a 12-month follow-up after percutaneous PVL closure by MLHFQ and KCCQ questionnaires. Changes in NT-proBNP and lactate dehydrogenase (LDH) levels were also analyzed. Results: Technical success (TS) was achieved in 97.5% of cases and procedural success (PS) in 85% of cases. In the group with PS a significant decrease in MLHFQ score as well as an increase in scores of all KCCQ domains was observed. No statistically significant changes were observed in the group without PS, mainly due to the small sample size. Conclusions: Percutaneous PVL closure is associated with better QoL during a 12-month follow-up provided PS was achieved. Due to the low number of subjects in whom PS was not achieved, it is not possible to determine the influence of a failed procedure in this group of patients.

Potential Applications of Computational Fluid Dynamics for Predicting Hemolysis in Mitral Paravalvular Leaks.

Paravalvular leaks (PVLs) may lead to hemolysis. In vitro shear stress forces above 300 Pa cause erythrocyte destruction. PVL channel dimensions may determine magnitude of shear stress forces that affect erythrocytes; however, this has not been tested. It remains unclear how different properties of PVL channels contribute to presence of hemolysis. A model of a left ventricle was created based on data from computer tomography with Slicer software PVLs of various shapes and sizes were introduced. Blood flow was simulated using ANSYS Fluent software. The following variables were examined: wall shear stress, shear stress in fluid, volume of PVL channel with shear stress exceeding 300 Pa, and duration of exposure of erythrocytes to shear stress values above 300 Pa. In all models, shear stress forces exceeded 300 Pa. Shear stress increased with blood flow rates and cross-sectional areas of any PVL. There was no linear relationship between cross-sectional area of a PVL and volume of a PVL channel with shear stress > 300 Pa. Blood flow through mitral PVLs is associated with shear stress above 300 Pa. Cross-sectional area of a PVL does not correlate with volume of a PVL channel with shear stress > 300 Pa and duration of exposure of erythrocytes to shear stress > 300 Pa.

Effects of trans-endocardial delivery of bone marrow-derived CD133+ cells on angina and quality of life in patients with refractory angina: A sub-analysis of the REGENT-VSEL trial.

BACKGROUND: The REGENT-VSEL trial demonstrated a neutral effect of transendocardial injection of autologous bone marrow (BM)-derived CD133+ in regard to myocardial ischemia. The current sub-analysis of the REGENT VSEL trial aims to assess the effect stem cell therapy has on quality of life (QoL) in patients with refractory angina. METHODS: Thirty-one patients (63.0 ± 6.4 years, 70% male) with recurrent CCS II-IV angina, despite optimal medical therapy, enrolled in the REGENT-VSEL single center, randomized, double-blinded, and placebo-controlled trial. Of the 31 patients, 16 individuals were randomly assigned to the active stem cell group and 15 individuals were randomly assigned to the placebo group on a 1:1 basis. The inducibility of ischemia, (≥ one myocardial segment) was confirmed for each patient using Tc-99m SPECT. QoL was measured using the Seattle Angina Questionnaire. Each patient completed the questionnaire prior to treatment and at the time of their outpatient follow-up visits at 1, 4, 6, and 12 months after cell/placebo treatment. RESULTS: The main finding of the REGENT-VSEL trial sub-analysis was that transendocardial injection of autologous BM-derived CD133+ stem cells in patients with chronic refractory angina did not show significant improvement in QoL in comparison to the control group. Moreover, there was no significant difference between cell therapy and placebo in a number of patients showing improvement of at least 1 Canadian Cardiovascular Society class during the follow-up period. CONCLUSIONS: Intra-myocardial delivery of autologous CD133+ stem cells is safe and feasible but does not show a significant improvement in the QoL or angina pectoris symptoms in patients with chronic myocardial ischemia.

Prevention of contrast-induced acute kidney injury in patients undergoing cardiovascular procedures-a systematic review and network meta-analysis.

BACKGROUND: Interventional diagnostic and therapeutic procedures requiring intravascular iodinated contrast steadily increase patient exposure to the risks of contrast-induced acute kidney injury (CIAKI), which is associated with death, nonfatal cardiovascular events, and prolonged hospitalization. The aim of this study was to investigate the efficacy of pharmacological and non-pharmacological treatments for CIAKI prevention in patients undergoing cardiovascular invasive procedures with iodinated contrast. METHODS AND FINDINGS: MEDLINE, Google Scholar, EMBASE and Cochrane databases as well as abstracts and presentations from major cardiovascular and nephrology meetings were searched, up to 22 April 2016. Eligible studies were randomized trials comparing strategies to prevent CIAKI (alone or in combination) when added to saline versus each other, saline, placebo, or no treatment in patients undergoing cardiovascular invasive procedures with administration of iodinated contrast. Two reviewers independently extracted trial-level data including number of patients, duration of follow-up, and outcomes. Eighteen strategies aimed at CIAKI prevention were identified. The primary outcome was the occurrence of CIAKI. Secondary outcomes were mortality, myocardial infarction, dialysis and heart failure. The data were pooled using network meta-analysis. Treatment estimates were calculated as odds ratios (ORs) with 95% credible intervals (CrI). 147 RCTs involving 33,463 patients were eligible. Saline plus N-acetylcysteine (OR 0.72, 95%CrI 0.57-0.88), ascorbic acid (0.59, 0.34-0.95), sodium bicarbonate plus N-acetylcysteine (0.59, 0.36-0.89), probucol (0.42, 0.15-0.91), methylxanthines (0.39, 0.20-0.66), statin (0.36, 0.21-0.59), device-guided matched hydration (0.35, 0.12-0.79), prostaglandins (0.26, 0.08-0.62) and trimetazidine (0.26, 0.09-0.59) were associated with lower odds of CIAKI compared to saline. Methylxanthines (0.12, 0.01-0.94) or left ventricular end-diastolic pressure-guided hydration (0.09, 0.01-0.59) were associated with lower mortality compared to saline. CONCLUSIONS: Currently recommended treatment with saline as the only measure to prevent CIAKI during cardiovascular procedures may not represent the optimal strategy. Vasodilators, when added to saline, may significantly reduce the odds of CIAKI following cardiovascular procedures.