Liquid Metal Grid Patterned Thin Film Devices Toward Absorption-Dominant and Strain-Tunable Electromagnetic Interference Shielding.

The demand of high-performance thin-film-shaped deformable electromagnetic interference (EMI) shielding devices is increasing for the next generation of wearable and miniaturized soft electronics. Although highly reflective conductive materials can effectively shield EMI, they prevent deformation of the devices owing to rigidity and generate secondary electromagnetic pollution simultaneously. Herein, soft and stretchable EMI shielding thin film devices with absorption-dominant EMI shielding behavior is presented. The devices consist of liquid metal (LM) layer and LM grid-patterned layer separated by a thin elastomeric film, fabricated by leveraging superior adhesion of aerosol-deposited LM on elastomer. The devices demonstrate high electromagnetic shielding effectiveness (SE) (SET of up to 75 dB) with low reflectance (SER of 1.5 dB at the resonant frequency) owing to EMI absorption induced by multiple internal reflection generated in the LM grid architectures. Remarkably, the excellent stretchability of the LM-based devices facilitates tunable EMI shielding abilities through grid space adjustment upon strain (resonant frequency shift from 81.3 to 71.3 GHz @ 33% strain) and is also capable of retaining shielding effectiveness even after multiple strain cycles. This newly explored device presents an advanced paradigm for powerful EMI shielding performance for next-generation smart electronics.

Polarization-Dependent Thin Films with Biaxial Anisotropic Absorption Constructed by a Single Coating and Subsequent Topochemical Polymerization of Chromophores.

For the construction of hierarchical superstructures with biaxial anisotropic absorption, a newly synthesized diacetylene-functionalized bipyridinium is self-assembled to use an electron-accepting host for capturing and arranging guests. The formation of the donor-acceptor complex triggers an intermolecular charge transfer, leading to chromophore activation. Polarization-dependent multichroic thin films are prepared through a sequential process of single-coating, self-assembly, and topochemical polymerization of host-guest chromophores. Molecular packing structures constructed in the single-layer optical thin film possess orthogonal absorption axes for two different wavelengths. By tuning the linear polarization angle, the color of the optical thin film can be intentionally controlled. This single-layered multichroic film provides a new pathway for the development of anticounterfeiting and multiplexing encryptions.

Photochemically and Thermally Programmed Optical Multi-States from a Single Diacetylene-Functionalized Cyanostilbene Luminogen.

To develop advanced optical systems, many scientists have endeavored to create smart optical materials which can tune their photophysical properties by changing molecular states. However, optical multi-states are obtained usually by mixing many dyes or stacking multi-layered structures. Here, multiple molecular states are tried to be generated with a single dye. In order to achieve the goal, a diacetylene-functionalized cyanostilbene luminogen (DACSM) is newly synthesized by covalently connecting diacetylene and cyanostilbene molecular functions. Photochemical reaction of cyanostilbene and topochemical polymerization of diacetylene can change the molecular state of DACSM. By thermal stimulations and the photochemical reaction, the conformation of polymerized DACSM is further tuned. The synergetic molecular cooperation of cyanostilbene and diacetylene generates multiple molecular states of DACSM. Utilizing the optical multi-states achieved from the newly developed DACSM, switchable optical patterns and smart secret codes are successfully demonstrated.

Suppressing Redox Reactions at the Perovskite-Nickel Oxide Interface with Zinc Nitride to Improve the Performance of Perovskite Solar Cells.

For p-i-n perovskite solar cells (PSCs), nickel oxide (NiOx) hole transport layers (HTLs) are the preferred interfacial layer due to their low cost, high mobility, high transmittance, and stability. However, the redox reaction between the Ni≥3+ and hydroxyl groups in the NiOx and perovskite layer leads to oxidized CH3NH3 + and reacts with PbI in the perovskite, resulting in a large number of non-radiative recombination sites. Among various transition metals, an ultra-thin zinc nitride (Zn3N2) layer on the NiOx surface is chosen to prevent these redox reactions and interfacial issues using a simple solution process at low temperatures. The redox reaction and non-radiative recombination at the interface of the perovskite and NiOx reduce chemically by using interface modifier Zn3N2 to reduce hydroxyl group and defects on the surface of NiOx. A thin layer of Zn3N2 at the NiOx/perovskite interface results in a high Ni3+/Ni2+ ratio and a significant work function (WF), which inhibits the redox reaction and provides a highly aligned energy level with perovskite crystal and rigorous trap-passivation ability. Consequently, Zn3N2-modified NiOx-based PSCs achieve a champion PCE of 21.61%, over the NiOx-based PSCs. After Zn3N2 modification, the PSC can improve stability under several conditions.

Self-Assembled and Polymerized Hierarchical Nanostructure Films of Cyanostilbene-Based Reactive AIEgens for Smart Chemosensors.

For the development of acid-responsive advanced fluorescent films with a 2D nanostructure, a pyridyl cyanostilbene-based AIEgen (PCRM) is newly synthesized. The synthesized PCRM exhibits aggregation-induced emission (AIE) and responds reversibly to acid and base stimuli. To fabricate the nanoporous polymer-stabilized film, PCRM and 4-(octyloxy)benzoic acid (8OB) are complexed in a 1:1 ratio through hydrogen bonding. The PCRM-8OB complex with a smectic mesophase is uniaxially oriented at first and photopolymerized with a crosslinker. By subsequently removing 8OB in an alkaline solution, nanopores are generated in the self-assembled and polymerized hierarchical 2D nanostructure film. The prepared nanoporous fluorescent films exhibit not only the reversible response to acid and base stimuli but also mechanical and chemical robustness. Since the nanoporous fluorescent films have different sensitivities to trifluoroacetic acid (TFA) depending on the molecular orientation in the film, advanced acid vapor sensors that can display the risk level according to the concentration of TFA are demonstrated. Reactive AIEgens-based hierarchical nanostructure films with nanopores fabricated by a subsequent process of self-assembly, polymerization, and etching can open a new door for the development of advanced chemosensors.

Coatable Negative Dispersion Retarder: Kinetically Controlled Self-Assembly Pathway of Butterfly-Shaped Molecular Building Blocks for the Construction of Nanocolumns.

Disc-shaped building blocks with columnar phases have attracted attention for their potential in optical applications, including a retarder. However, to achieve coatable high-performance optical films, it is essential to understand a subtle interaction balance between building blocks and relevant self-assembled behaviors during material processing. Herein, we studied a self-assembled nanocolumn evaluation of linear butterfly-shaped dendrons (T-A3D) consisting of thiophene-based conjugated core and flexible alkyl dendron. X-ray diffraction provided insight into the unique hexagonal columnar liquid crystal phase of T-A3D, driven by intermolecular hydrogen bonding and coplanarity of the thiophene-based conjugated core. The formation of a self-assembled nanocolumn with high mobility enabled the uniaxial orientation of butterfly-shaped T-A3D on the aligned rod-shaped nematic reactive mesogens, resulting in a transparent and colorless two-layered negative retarder. The self-assembled nanocolumn consisting of butterfly-shaped molecule would break a new ground for developing advanced optical thin films.

Encryptable Electrochromic Smart Windows: Uniaxially Oriented and Polymerized Hierarchical Nanostructures Constructed by Self-Assembly of Tetrathiafulvalene-Based Reactive Mesogens.

Tetrathiafulvalene (TTF)-based reactive mesogens (TTF-E and TTF-T) are synthesized, self-assembled, uniaxially oriented, and polymerized for the development of encryptable electrochromic smart windows. Electrochemical and spectroscopic experiments prove that the self-assembled TTF mixture (TTFM, TTF-E:TTF-T = 1:1) can reversibly switch the absorption wavelength of the TTF chromophore according to the redox reactions. Based on the identification of the phase transition and crystallographic structure, uniaxially oriented hierarchical nanostructures are easily constructed on the macroscopic area by simple coating and a self-assembly process. Subsequent polymerization of hierarchical nanostructures of TTFM significantly enhances thermal and mechanical stabilities and makes it possible for them to be fabricated as an electrochromic device. The angularly dependent correlation between the anisotropy of mesogens and the linearly polarized light allow us to demonstrate TTFM as smart windows capable of various optical security applications, including privacy protection and information encryption.

White light thermoplasmonic activated gold nanorod arrays enable the photo-thermal disinfection of medical tools from bacterial contamination.

The outspread of bacterial pathogens causing severe infections and spreading rapidly, especially among hospitalized patients, is worrying and represents a global public health issue. Current disinfection techniques are becoming insufficient to counteract the spread of these pathogens because they carry multiple antibiotic-resistance genes. For this reason, a constant need exists for new technological solutions that rely on physical methods rather than chemicals. Nanotechnology support provides novel and unexplored opportunities to boost groundbreaking, next-gen solutions. With the help of plasmonic-assisted nanomaterials, we present and discuss our findings in innovative bacterial disinfection techniques. Gold nanorods (AuNRs) immobilized on rigid substrates are utilized as efficient white light-to-heat transducers (thermoplasmonic effect) for photo-thermal (PT) disinfection. The resulting AuNRs array shows a high sensitivity change in refractive index and an extraordinary capability in converting white light to heat, producing a temperature change greater than 50 °C in a few minute interval illumination time. Results were validated using a theoretical approach based on a diffusive heat transfer model. Experiments performed with a strain of Escherichia coli as a model microorganism confirm the excellent capability of the AuNRs array to reduce the bacteria viability upon white light illumination. Conversely, the E. coli cells remain viable without white light illumination, which also confirms the lack of intrinsic toxicity of the AuNRs array. The PT transduction capability of the AuNRs array is utilized to produce white light heating of medical tools used during surgical treatments, generating a temperature increase that can be controlled and is suitable for disinfection. Our findings are pioneering a new opportunity for healthcare facilities since the reported methodology allows non-hazardous disinfection of medical devices by simply employing a conventional white light lamp.

When Chirophotonic Film Meets Wrinkles: Viewing Angle Independent Corrugated Photonic Crystal Paper.

Light manipulation strategies of nature have fascinated humans for centuries. In particular, structural colors are of considerable interest due to their ability to control the interaction between light and matter. Here, wrinkled photonic crystal papers (PCPs) are fabricated to demonstrate the consistent reflection of colors regardless of viewing angles. The nanoscale molecular self-assembly of a cholesteric liquid crystal (CLC) with a microscale corrugated surface is combined. Fully polymerizable CLC paints are uniaxially coated onto a wrinkled interpenetrating polymer network (IPN) substrate. Photopolymerization of the helicoidal nanostructures results in a flexible and free-standing PCP. The facile method of fabricating the wrinkled PCPs provides a scalable route for the development of novel chirophotonic materials with precisely controlled helical pitch and curvature dimensions. The reflection notch position of the flat PCP shifts to a lower wavelength when the viewing angle increased, while the selective reflection wavelength of wrinkled PCP is remained consistent regardless of viewing angles. The optical reflection of the 1D stripe-wrinkled PCP is dependent on the wrinkle direction. PCPs with different corrugated directions can be patterned to reduce the angular-dependent optical reflection of wrinkles. Furthermore, 2D wavy-wrinkled PCP is successfully developed that exhibit directionally independent reflection of color.

Remote-controllable and encryptable smart glasses: a photoresponsive azobenzene molecular commander determines the molecular alignments of liquid crystal soldiers.

For the development of optically encryptable smart glass that can control the molecular alignment of liquid crystals (LCs), an azobenzene-based reactive molecule (ARM) capable of trans-cis photoisomerization is newly designed and synthesized. Photo-triggered LC-commandable smart glasses are successfully constructed by the surface functionalization technique using 3-aminopropyltriethoxysilane (APTMS) coupling agent and an ARM. The surface functionalization with the ARM is verified by spectroscopic analysis and various observations including changes in the wettability and surface morphology. Using the ARM-treated substrate, the LC command cell which can effectively switch the molecular orientation of nematic LC (E7) by the irradiation of UV and visible light is demonstrated. The results of optical investigation demonstrate the directional correlation between light and photoisomerization, revealing the tilt mechanism of azobenzene units. The capability to control the molecular orientation of LCs remotely and selectively allows the development of remote-controllable and encryptable smart glasses.

A Flexible and Transparent Zinc-Nanofiber Network Electrode for Wearable Electrochromic, Rechargeable Zn-Ion Battery.

The flexible electrochromic Zn-ion battery (FE-ZiB), a newly born energy-storage technology having both electrochromic characteristics and energy-storage capability in a single device, will be a promising technology for the future transparent wearable electronics. However, the current technology limits the fabrication of FE-ZIB because the zinc (Zn) anode material is opaque and rigid. The development of a flexible and transparent Zn anode is the key factor to overcoming the current limitation. Here, for the first time, a flexible, transparent zinc-nanofiber network anode electrode (Zn@Ni@AgNFs) is reported for an FE-ZiB device that yields a remarkable electrochemical performance of a high areal capacity of 174.82 mA h m2 at 0.013 mA cm-2 applied current density, high optical contrast (50%), and excellent mechanical flexibility. The fabricated FE-ZiB device also exhibits a high volumetric energy density of 378.8 W h m-3 at a power density of 562.7 W m-3 . Besides, the FE-ZiB demonstrates excellent electrochromic capability with a reversible color transition from a transparent in a discharged state (0.3 V) to a dark bluish-violet in a charged state (1.6 V). These results highlight a new pathway for the development of transparent batteries for smart wearable electronic devices.

The transfer and amplification of cyanostilbene molecular function to advanced flexible optical paints through self-crosslinkable side-chain liquid crystal polysiloxanes.

A self-crosslinkable side-chain liquid crystal polysiloxane containing cyanostilbene (Si-CSM) was newly synthesized for the development of a new generation of flexible optical paints. The photoisomerization of the cyanostilbene moiety at the molecular level was transferred and amplified to the phase transition of Si-CSM, resulting in changes in the macroscopic optical properties of the Si-CSM thin film. The self-crosslinking reaction between Si-H groups in the Si-CSM polymer backbone caused the self-crosslinked Si-CSM thin film to be very elastic and both thermally and chemically stable. Therefore, the self-crosslinked Si-CSM thin film endured stretching and bending deformations under relatively harsh conditions. In addition, the uniaxially oriented and self-crosslinked Si-CSM thin film generated linearly polarized light emission. Polarization-dependent and photopatternable secret coatings were fabricated via a spontaneous self-crosslinking reaction after coating the Si-CSM paint and irradiating ultraviolet (UV) light through a photomask. This newly developed flexible optical Si-CSM paint can be applied in next-generation optical coatings.

Development of Diketopyrrolopyrrole-Based Smart Inks by Substituting Ionic Pendants and Engineering Molecular Packing Structures.

A series of diketopyrrolopyrrole (DPP) luminogen amphiphiles were newly designed and synthesized by a single-step anionic exchange reaction for controlling the photoluminescence properties in both solution and solid states. Multicolor emission in response to thermal, mechanical, and chemical stimuli was successfully demonstrated by engineering well-defined supramolecular assemblies. Phase transformation from the metastable amorphous solid to the stable orthorhombic crystal of [DP-Im][Br] provided the reversibly patternable light emission. Self-organization into the smectic crystalline phase of [DP-Im][TFSI] allowed us to show the linearly polarized light emission. By simultaneously applying [DP-Im][Br] and [DP-Im][TFSI], we demonstrated the fabrication of smart sensors for packaging of food or vaccines that can detect thermal attacks.

Soft and Stretchable Liquid Metal Composites with Shape Memory and Healable Conductivity.

Shape memory composites are fascinating materials with the ability to preserve deformed shapes that recover when triggered by certain external stimuli. Although elastomers are not inherently shape memory materials, the inclusion of phase-change materials within the elastomer can impart shape memory properties. When this filler changes the phase from liquid to solid, the effective modulus of the polymer increases significantly, enabling stiffness tuning. Using gallium, a metal with a low melting point (29.8 °C), it is possible to create elastomeric materials with metallic conductivity and shape memory properties. This concept has been used previously in core-shell (gallium-elastomer) fibers and foams, but here, we show that it can also be implemented in elastomeric films containing microchannels. Such microchannels are appealing because it is possible to control the geometry of the filler and create metallically conductive circuits. Stretching the solidified metal fractures the fillers; however, they can heal by body heat to restore conductivity. Such conductive, shape memory sheets with healable conductivity may find applications in stretchable electronics and soft robotics.

Transfer and Amplification of Iodine-Based Diacetylene Amphiphiles to Anisotropic Optical Properties by Uniaxial Orientation in Thin Films.

For flexible displays, there is a desperate need for a broadband coatable polarizer that can absorb light in a specific direction. Conventional polarizers fabricated by the polymer stretching process are too thick (50-200 µm) to be used as polarizers that can be applied to antireflective films in flexible displays. For the development of the broadband coatable thin film polarizer, diacetylene (DA) amphiphiles containing I- or I3- are newly designed and synthesized, and the content of DA amphiphiles in the 4,6-decadiyne solvent is optimized to form a lyotropic liquid crystal (LLC) phase. Topochemical polymerization of uniaxially oriented iodine-based DA not only stabilizes the film but also broadens the polarization light region from 350 to 700 nm. The transfer and amplification of iodine and DA functions in uniaxially oriented thin films enable the fabrication of broadband coatable thin film polarizers.

Thermal Energy Harvest and Reutilization by the Combination of Thermal Conducting Reactive Mesogens and Heat-Storage Mesogens.

Utilizing a newly programmed and synthesized heat storage mesogen (HSM) and reactive mesogen (RM), advanced heat managing polymer alloys that exhibit high thermal conductivity, high latent heat, and phase transition at high temperatures were developed for use as smart thermal energy harvesting and reutilization materials. The RM in the heat-managing RM-HSM polymer alloy was polymerized to form a robust polymeric network with high thermal conductivity. The phase-separated HSM domains between RM polymeric networks absorbed and released a lot of thermal energy in response to changes in the surrounding temperature. For the fabrication of smart heat-managing RM-HSM polymer alloys, the composition and polymerization temperature were optimized based on the constructed phase diagram and thermal energy managing properties of the RM-HSM mixture. From morphological investigation and thermal analysis, it was realized that the heat storage capacity of polymer alloys depends on the size of the phase-separated HSM domain. The structure-morphology-property relationship of the heat managing polymer alloys was built based on the combined techniques of thermal, scattering, and morphological analysis. The newly developed mesogen-based polymer alloys can be used as smart thermal energy-harvesting and reutilization materials.

Imidazolium-Functionalized Diacetylene Amphiphiles: Strike a Lighter and Wear Polaroid Glasses to Decipher the Secret Code.

The development of smart inks that change color and transparency in response to external stimuli is very important for various fields, from modern art to safety and anticounterfeiting technology. A uniaxially oriented diacetylene thin film on a macroscopic area is obtained by coating, self-assembling and topochemical photopolymerizing of imidazolium-functionalized diacetylenes (M-DA and T-DA) and 4,6-decadiyne ink (70 wt%:20 wt%:10 wt%) exhibiting a lyotropic smectic A liquid-crystalline phase at room temperature. The color and transparency of letters and symbols written with the DA-based secret inks change reversibly from blue to red as well as from colorless transparent to black opaque depending on the temperature and polarization axis. A secret code written with thermoresponsive and polarization-dependent secret inks consisting of imidazolium-functionalized diacetylenes is successfully deciphered by wearing polaroid glasses and holding a burning torch.

Diacetylene-Functionalized Dendrons: Self-Assembled and Photopolymerized Three-Dimensional Networks for Advanced Self-Healing and Wringing Soft Materials.

The physical properties of supramolecular soft materials strongly depend on the molecular packing structures constructed by thermodynamically and kinetically controlled molecular self-assembly. To investigate the relationship between molecular function and self-assembled molecular packing structure, a series of diacetylene (DA)-based supramolecules was synthesized by chemically connecting flexible dendrons to DA with amide (aDA-D) or ester (eDA-D) functions. The three-dimensional (3D) organogel network of amide-functionalized aDA-D was prepared in both polar and nonpolar solvents due to the intermolecular hydrogen bonding. 3D networks of aDA-D can be further stabilized by topochemical photopolymerization. The self-healing behavior of aDA-D was observed in the sheet-like structure formed in n-dodecane by the hydrophobic interaction between the gelator and solvent. The wringing behavior of aDA-D was also demonstrated using the dynamic interaction of amide function with n-butanol solvent. Kinetically controlled and photostabilized 3D networks can be a key component from biomedical devices to soft robotic applications.

Mechanically programmed 2D and 3D liquid crystal elastomers at macro- and microscale via two-step photocrosslinking.

Liquid crystal elastomers (LCEs) are a unique class of active materials with the largest known reversible shape transformation in the solid state. The shape change of LCEs is directed by programming their molecular orientation, and therefore, several strategies to control LC alignment have been developed. Although mechanical alignment coupled with a two-step crosslinking is commonly adopted for uniaxially-aligned monodomain LCE synthesis, the fabrication of 3D-shaped LCEs at the macro- and microscale has been rarely accomplished. Here, we report a facile processing method for fabricating 2D and 3D-shaped LCEs at the macro- and microscales at room temperature by mechanically programming (i.e., stretching, pressing, embossing and UV-imprinting) the polydomain LCE, and subsequent photocrosslinking. The programmed LCEs exhibited a reversible shape change when exposed to thermal and chemical stimuli. Besides the programmed shape changes, the actuation strain can also be preprogrammed by adjusting the extent of elongation of a polydomain LCE. Furthermore, the LCE micropillar arrays prepared by UV-imprinting displayed a substantial change in pillar height in a reversible manner during thermal actuation. Our convenient method for fabricating reversible 2D and 3D-shaped LCEs from commercially available materials may expedite the potential applications of LCEs in actuators, soft robots, smart coatings, tunable optics and medicine.

Fast Response Characteristics of Flexible Ultraviolet Photosensors with GaN Nanowires and Graphene.

We report the fast response characteristics of flexible ultraviolet photosensors with GaN nanowires (NWs) and a graphene channel. The GaN NWs used as light-absorbing media are horizontally and randomly embedded in a graphene sandwich structure in which the number of bottom graphene layers is varied from zero to three and the top is a fixed single layer of graphene. In the response curve of the photosensor with a double-layer bottom graphene, as obtained under pulsed illumination with a pulse width of 50 ms and a duty cycle of 50%, the rise and decay times were measured as 24.1 ± 0.1 and 28.2 ± 0.1 ms, respectively. The eye-crossing percentage was evaluated as 52.1%, indicating no substantial distortion of the duty cycle and no pulse symmetry problem. The rise and decay times estimated from an equivalent circuit analysis represented by resistances and capacitances agree well with the measured values. When the device was under the bending condition, the rise and decay times of the photosensor were comparable to those in the unbent state.