RESUMEN
The direct one-step hydrogenation of toluene to methylcyclohexane facilitated by a proton-exchange membrane water electrolyzer driven by renewable energy has garnered considerable attention for stable hydrogen storage and safe hydrogen transportation. However, a persistent challenge lies in the crossover of toluene from the cathode to the anode chamber, which deteriorates the anode and decreases its energy efficiency and lifetime. To address this challenge, the catalyst-poisoning mechanism is systematically investigated using IrO2 and high-entropic non-noble-metal alloys as anodes in acidic electrolytes saturated with toluene and toluene-oxidized derivatives, such as benzaldehyde, benzyl alcohol, and benzoic acid. Benzoic acid plays an important role in polymer-like carbon-film formation by blocking the catalytically active sites on the anode surface. Moreover, Nb and the highly entropic state on the surface of the multi-element alloy lower the adsorbing ability of toluene and prevent polymer-like carbon film formation. This study contributes to the design of catalyst-poisoning-resistant anodes for organic hydride technology, advanced fuel cells, and batteries.
RESUMEN
Proton exchange membranes with high proton conductivity and low crossover of fuel molecules are required to realize advanced fuel-cell technology. The selective transportation of protons, which occurs by blocking the transportation of fuel molecules across a proton exchange membrane, is crucial to suppress crossover while maintaining a high proton conductivity. In this study, a simple yet powerful method is proposed for optimizing the crossover-conductivity relationship by pasting sulfanilic-functionalized holey graphenes onto a Nafion membrane. The results show that the sulfanilic-functionalized holey graphenes supported by the membrane suppresses the crossover by 89% in methanol and 80% in formate compared with that in the self-assembled Nafion membrane; an ≈60% reduction is observed in the proton conductivity. This method exhibits the potential for application in advanced fuel cells that use methanol and formic acid as chemical fuels to achieve high energy efficiency.
RESUMEN
Understanding the catalytic mechanism of highly active two-dimensional electrocatalysts is crucial to their rational design. Herein, we reveal the element dependence of the reactivity of two-dimensional metal dichalcogenide sheets for electrocatalytic CO2 reduction. We found that tin(IV) disulfide (SnS2) and molybdenum(IV) disulfide (MoS2) sheets exhibited Faradaic efficiencies of 63.3% and â¼0%, respectively, for formic acid. Scanning electrochemical cell microscopy and theoretical calculations were used to identify the catalytically active sites of SnS2 as terraces and edges. Owing to the effective utilization of the entire surface area, SnS2 can effectively accelerate catalytic reactions. This finding provides a direction for material research in two-dimensional electrocatalysts for energy-efficient chemical production from electrochemical CO2 reduction, as well as for other energy devices.
RESUMEN
To realize a sustainable hydrogen economy, corrosion-resistant non-noble-metal catalysts are needed to replace noble-metal-based catalysts. The combination of passivation elements and catalytically active elements is crucial for simultaneously achieving high corrosion resistance and high catalytic activity. Herein, the self-selection/reconstruction characteristics of multi-element (nonary) alloys that can automatically redistribute suitable elements and rearrange surface structures under the target reaction conditions during the oxygen evolution reaction are investigated. The following synergetic effect (i.e., cocktail effect), among the elements Ti, Zr, Nb, and Mo, significantly contributes to passivation, whereas Cr, Co, Ni, Mn, and Fe enhance the catalytic activity. According to the practical water electrolysis experiments, the self-selected/reconstructed multi-element alloy demonstrates high performance under a similar condition with proton exchange membrane (PEM)-type water electrolysis without obvious degradation during stability tests. This verifies the resistance of the alloy to corrosion when used as an electrode under a practical PEM electrolysis condition.
RESUMEN
Electron doping of graphene has been extensively studied on graphene-supported surfaces, where the metallicity is influenced by the substrate. Herewith we propose potassium adsorption on free-standing nanoporous graphene, thus eluding any effect due to the substrate. We monitor the electron migration in the π* downward-shifted conduction band. In this rigid band shift, we correlate the spectral density of the π* state in the upper Dirac cone with the associated plasmon, blue-shifted with increasing K dose, as deduced by electron energy loss spectroscopy. These results are confirmed by the Dirac plasmon activated by the C 1s emitted electrons, thanks to spatially resolved photoemission. This crosscheck constitutes a reference on the correlation between the electronic π* states in the conduction band and the Dirac plasmon evolution upon in situ electron doping of fully free-standing graphene.
RESUMEN
Nitrogen (N) doping is one of the most effective approaches to tailor the chemical and physical properties of graphene. By the interplay between N dopants and 3D curvature of graphene lattices, N-doped 3D graphene displays superior performance in electrocatalysis and solar-energy harvesting for energy and environmental applications. However, the electrical transport properties and the electronic states, which are the key factors to understand the origins of the N-doping effect in 3D graphene, are still missing. The electronic properties of N-doped 3D graphene are systematically investigated by an electric-double-layer transistor method. It is demonstrated that Urbach-tail-like localized states are located around the neutral point of N-doped 3D graphene with the background metallic transport channels. The dual nature of electronic states, generated by the synergistic effect of N dopants and 3D curvature of graphene, can be the electronic origin of the high electrocatalysis, enhanced molecular adsorption, and light absorption of N-doped 3D graphene.
RESUMEN
Atomic deuterium (D) adsorption on free-standing nanoporous graphene obtained by ultra-high vacuum D2 molecular cracking reveals a homogeneous distribution all over the nanoporous graphene sample, as deduced by ultra-high vacuum Raman spectroscopy combined with core-level photoemission spectroscopy. Raman microscopy unveils the presence of bonding distortion, from the signal associated to the planar sp2 configuration of graphene toward the sp3 tetrahedral structure of graphane. The establishment of D-C sp3 hybrid bonds is also clearly determined by high-resolution X-ray photoelectron spectroscopy and spatially correlated to the Auger spectroscopy signal. This work shows that the low-energy molecular cracking of D2 in an ultra-high vacuum is an efficient strategy for obtaining high-quality semiconducting graphane with homogeneous uptake of deuterium atoms, as confirmed by this combined optical and electronic spectro-microscopy study wholly carried out in ultra-high vacuum conditions.
RESUMEN
Carbon-based metal-free catalysts for the hydrogen evolution reaction (HER) are essential for the development of a sustainable hydrogen society. Identification of the active sites in heterogeneous catalysis is key for the rational design of low-cost and efficient catalysts. Here, by fabricating holey graphene with chemically dopants, the atomic-level mechanism for accelerating HER by chemical dopants is unveiled, through elemental mapping with atomistic characterizations, scanning electrochemical cell microscopy (SECCM), and density functional theory (DFT) calculations. It is found that the synergetic effects of two important factors-edge structure of graphene and nitrogen/phosphorous codoping-enhance HER activity. SECCM evidences that graphene edges with chemical dopants are electrochemically very active. Indeed, DFT calculation suggests that the pyridinic nitrogen atom could be the catalytically active sites. The HER activity is enhanced due to phosphorus dopants, because phosphorus dopants promote the charge accumulations on the catalytically active nitrogen atoms. These findings pave a path for engineering the edge structure of graphene in graphene-based catalysts.