Photobiocidal Activity of TiO2/UHMWPE Composite Activated by Reduced Graphene Oxide under White Light.

Herein, we introduce a photobiocidal surface activated by white light. The photobiocidal surface was produced through thermocompressing a mixture of titanium dioxide (TiO2), ultra-high-molecular-weight polyethylene (UHMWPE), and reduced graphene oxide (rGO) powders. A photobiocidal activity was not observed on UHMWPE-TiO2. However, UHMWPE-TiO2@rGO exhibited potent photobiocidal activity (>3-log reduction) against Staphylococcus epidermidis and Escherichia coli bacteria after a 12 h exposure to white light. The activity was even more potent against the phage phi 6 virus, a SARS-CoV-2 surrogate, with a >5-log reduction after 6 h exposure to white light. Our mechanistic studies showed that the UHMWPE-TiO2@rGO was activated only by UV light, which accounts for 0.31% of the light emitted by the white LED lamp, producing reactive oxygen species that are lethal to microbes. This indicates that adding rGO to UHMWPE-TiO2 triggered intense photobiocidal activity even at shallow UV flux levels.

Antimicrobial and Antifouling Effects of Petal-Like Nanostructure by Evaporation-Induced Self-Assembly for Personal Protective Equipment.

Although the personal protective equipment (PPE) used by healthcare workers (HCWs) effectively blocks hazardous substances and pathogens, it does not fully rule out the possibility of infection, as pathogens surviving on the fabric surface pose a substantial risk of cross-infection through unintended means. Therefore, PPE materials that exhibit effective biocidal activity while minimizing contamination by viscous body fluids (e.g., blood and saliva) and pathogen-laden droplets are highly sought. In this study, petal-like nanostructures (PNSs) are synthesized through the vertical rearrangement of colloidal lamellar bilayers via evaporation-induced self-assembly of octadecylamine, silica-alumina sol, and diverse photosensitizer. The developed method is compatible with various fabrics and imparts visible-light-activated antimicrobial and superhydrophobic-based antifouling activities. PNS-coated fabrics could provide a high level of protection and effectively block pathogen transmission as exemplified by their ability to roll off viscous body fluids reducing bacterial droplet adhesion and to inactivate various microorganisms. The combination of antifouling and photobiocidal activities results in the complete inactivation of sprayed pathogen-laden droplets within 30 min. Thus, this study paves the way for effective contagious disease management and the protection of HCWs in general medical environments, inspiring further research on the fabrication of materials that integrate multiple useful functionalities.

Performance comparison of photodynamic antimicrobial chemotherapy with visible-light-activated organic dyes: Rose bengal, crystal violet, methylene blue, and toluidine blue O.

This study evaluated the photobiocidal performance of four widely distributed visible-light-activated (VLA) dyes against two bacteria (Staphylococcus epidermidis and Escherichia coli) and two bacteriophages (phages MS2 and phi 6): rose bengal (RB), crystal violet, methylene blue, and toluidine blue O (TBO). The photobiocidal performance of each dye depended on the relationship between the type of dye and microorganism. Gram-negative E. coli and the non-enveloped structure of phage MS2 showed more resistance to the photobiocidal reaction than Gram-positive S. epidermidis and the enveloped structure of phage phi 6. RB had the highest potential to yield reactive oxygen species. However, the photobiocidal performance of RB was dependent on the magnitude of the surface charge of the microorganisms; for example, anionic RB induced a negative surface charge and thus electrical repulsion. On the other hand, the photobiocidal performance of TBO was observed to be less affected by the microorganism type. The comparative results presented in our study have significant implications for selecting photodynamic antimicrobial chemotherapy (PACT) dyes suitable for specific situations and purposes. Furthermore, they contribute to the advancement of PACT-related technologies by enhancing their applicability and scalability.

Spatial and PMF analysis of particle size distributions simultaneously measured at four locations at the roadside of highways.

In urban areas, particulate matter emitted from vehicles directly affects the health of citizens near roads. Thus, in this study, particle size distribution was measured by the horizontal and vertical distances along a highway road with heavy traffic to characterize the dispersion phenomena of particulate matter emitted from vehicles. In addition, the contribution of pollution sources was analyzed using a source-receptor model. A concentration gradient was observed in which the concentration decreased with the increase in the distance from the road when the wind blew from the road to the monitoring locations. The concentration was slightly higher within 50 m of the road when the wind blows parallel to the road, and similar concentrations were found at the other monitoring locations further away from the roads. In particular, the higher the turbulence intensity of the wind, the lower is the concentration gradient coefficient because of the more enhanced mixing and dispersion. A positive matrix factorization (PMF) model with the measured particle size distribution data in the range of 9-300 nm resulted in a contribution of about 70 % (number) and 20 % (mass) to particle concentrations because of six types of vehicles including LPG, two gasoline vehicles (GDI, MPI), and three diesel vehicles with 3rd, 4th, and 5th emission classes. It showed a decrease in the vehicular contribution as the distance from the road increased. Particle number concentrations decreased with increasing altitude up to 30 m above the ground. The results of this study can be useful in deriving generalized gradient equations of particle concentrations exposed by distance and wind direction at the roadside using traffic and meteorological conditions and for establishing environmental policies, such as roadside exposure assessment, in the future. A CAPSULE ABSTRACT: Dispersion of particles emitted from vehicles on a busy highway was characterized by roadside measurements of horizontal and vertical profiles of particle size distributions measured at four locations. The source profiles and contributions were estimated by major sources using a source-receptor model such as PMF.

Performance evaluation of an electrostatic precipitator with a copper plate using an aerosolized SARS-CoV-2 surrogate (bacteriophage phi 6).

The global spread of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has reminded us of the importance of developing technologies to reduce and control bioaerosols in built environments. For bioaerosol control, the interaction between researchers and biomaterials is essential, and considering the characteristics of target pathogens is strongly required. Herein, we used enveloped viral aerosols, bacteriophage phi 6, for evaluating the performance of an electrostatic precipitator (ESP) with a copper-collecting plate (Cu-plate). In particular, bacteriophage phi 6 is an accessible enveloped virus that can be operated in biosafety level (BSL)-1 as a promising surrogate for SARS-CoV-2 with structural and morphological similarities. ESP with Cu-plate showed >91% of particle removal efficiency for viral aerosols at 77 cm/s of airflow face velocity. Moreover, the Cu-plate presented a potent antiviral performance of 5.4-relative log reduction within <15 min of contact. We believe that the evaluation of ESP performance using an aerosolized enveloped virus and plaque assay is invaluable. Our results provide essential information for the development of bioaerosol control technologies that will lead the post-corona era.

Transparent, Robust, and Photochemical Antibacterial Surface Based on Hydrogen Bonding between a Si-Al and Cationic Dye.

Healthcare-associated infections can occur and spread through direct contact with contaminated fomites in a hospital, such as mobile phones, tablets, computer keyboards, doorknobs, and other surfaces. Herein, this study shows a transparent, robust, and visible light-activated antibacterial surface based on hydrogen bonds between a transparent silica-alumina (Si-Al) sol-gel and a visible light-activated photosensitizer, such as crystal violet (CV). The study of the bonding mechanisms revealed that hydrogen bonding predominantly occurs between the N of CV and Al-OH. Apart from CV, Si-Al can be combined with a variety of dyes, highlighting its potential for wide application. The Si-Al@CV film selectively generates singlet oxygen using ambient visible light, triggering potent photochemical antibacterial performance against Gram-positive and Gram-negative bacteria. Additionally, the Si-Al@CV film is stable even after mechanical stability tests such as tape adhesion, scratch, bending, and water immersion. In vitro cytotoxicity tests using C2C12 myoblast cells showed that the Si-Al@CV film is a biocompatible material. This work suggests a new approach for designing a transparent and robust touchscreen surface with photochemical antibacterial capability against healthcare-associated infections.

Photobiocidal-triboelectric nanolayer coating of photosensitizer/silica-alumina for reusable and visible-light-driven antibacterial/antiviral air filters.

Outbreaks of airborne pathogens pose a major threat to public health. Here we present a single-step nanocoating process to endow commercial face mask filters with photobiocidal activity, triboelectric filtration capability, and washability. These functions were successfully achieved with a composite nanolayer of silica-alumina (Si-Al) sol-gel, crystal violet (CV) photosensitizer, and hydrophobic electronegative molecules of 1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane (PFOTES). The transparent Si-Al matrix strongly immobilized the photosensitizer molecules while dispersing them spatially, thus suppressing self-quenching. During nanolayer formation, PFOTES was anisotropically rearranged on the Si-Al matrix, promoting moisture resistance and triboelectric charging of the Si-Al/PFOTES-CV (SAPC)-coated filter. The SAPC nanolayer stabilized the photoexcited state of the photosensitizer and promoted redox reaction. Compared to pure-photosensitizer-coated filters, the SAPC filter showed substantially higher photobiocidal efficiency (∼99.99 % for bacteria and a virus) and photodurability (∼83 % reduction in bactericidal efficiency for the pure-photosensitizer filter but ∼0.34 % for the SAPC filter after 72 h of light irradiation). Moreover, after five washes with detergent, the SAPC filter maintained its photobiocidal and filtration performance, proving its reusability potential. Therefore, this SAPC nanolayer coating provides a practical strategy for manufacturing an antimicrobial and reusable mask filter for use during the ongoing COVID-19 pandemic.

Mini-laser based submicron aerosol generator for the simple and stable simulation of combustion particulate matter.

Air pollution causes millions of deaths every year. The aerosols, especially airborne nanoparticles generated by combustion, have detrimental effect on health. To protect public health against harmful aerosols, efforts to develop effective air cleaning technology have continued over the past several decades. However, the aerosol generation method used in air cleaning performance tests still rely largely on the traditional methods such as burning cigarettes, paper, and incense. Since the traditional method is inaccurate and unsteady, a more precisely controlled aerosol generation method should be developed. Here, we present a simple and inexpensive aerosol generation method that can easily and consistently produce submicron aerosols through laser ablation. This device constitutes an integrated system with a high-quality mini laser for rapid aerosol generation and a two-axis moving stage for continuous aerosol generation. We demonstrate that the concentration of generated aerosols could be easily controlled by selecting the laser irradiation time and power, resulting in the generation of ~104 particles/cm3 within a few seconds. In addition, the shape and size of generated aerosols can be controlled by changing the target material. This submicron aerosol generation process can be stably maintained for up to 1 h using small-sized (3 cm × 8 cm) affordable and accessible materials, such as wood and leather, highlighting the advantages of this inexpensive and easy-to-use combustion airborne submicron particle generation method.

Emission of particulate and gaseous pollutants from household laser processing machine.

Indoor air quality (IAQ) directly affects the health of occupants. Household manufacturing equipment (HME) used for hobbies or educational purposes is a new and unexplored source of air pollution. In this study, we evaluated the characteristics of particulate and gaseous pollutants produced by a household laser processing equipment (HLPE). Various target materials were tested using a commercial HLPE under various operating conditions of laser power and sheath air flow rate. The mode diameters of the emitted particles gradually decreased as laser power increased, while the particle number concentration (PNC) and particle emission rate (PER) increased. In addition, as the sheath air flow rate quadrupled from 10 to 40 L/min, the mode diameter of the emitted particles decreased by nearly 25%, but the effect on the PNC was insignificant. When the laser induced the target materials at 53 mW, the mode diameters of particles were <150 nm, and PNCs were >2.0 × 104 particles/cm3. Particularly, analyses of sampled aerosols indicated that harmful substances such as sulfur and barium were present in particles emitted from leather. The carcinogenic gaseous pollutants such as acrylonitrile, acetaldehyde, 1,3-butadiene, benzene, and C8 aromatics (ethylbenzene) were emitted from all target materials. In an actual indoor environment, the PNC of inhalable ultrafine particles (UFPs) was >5 × 104 particles/cm3 during 30 min of HLPE operation. Our results suggest that more meticulous control methods are needed, including the use of less harmful target materials along with filters or adsorbents that prevent emission of pollutants.

Evaluation of survival rates of airborne microorganisms on the filter layers of commercial face masks.

After the WHO designated COVID-19 a global pandemic, face masks have become a precious commodity worldwide. However, uncertainty remains around several details regarding face masks, including the potential for transmission of bioaerosols depending on the type of mask and secondary spread by face masks. Thus, understanding the interplay between face mask structure and harmful bioaerosols is essential for protecting public health. Here, we evaluated the microbial survival rate at each layer of commercial of filtering facepiece respirators (FFRs) and surgical masks (SMs) using bacterial bioaerosols. The penetration efficiency of bacterial particles for FFRs was lower than that for SMs; however, the microbial survival rate for all tested masks was >13%, regardless of filtration performance. Most bacterial particles survived in the filter layer (44%-77%) (e.g., the core filtering layer); the outer layer also exhibited significant survival rates (18%-29%). Most notably, survival rates were determined for the inner layers (<1% for FFRs, 3%-16% for SMs), which are in contact with the respiratory tract. Our comparisons of the permeability and survival rate of bioaerosols in each layer will contribute to bioaerosol-face mask research, while also providing information to facilitate the establishment of a mask-reuse protocol.

Enriched Aerosol-to-Hydrosol Transfer for Rapid and Continuous Monitoring of Bioaerosols.

Bioaerosols, including infectious diseases such as COVID-19, are a continuous threat to global public safety. Despite their importance, the development of a practical, real-time means of monitoring bioaerosols has remained elusive. Here, we present a novel, simple, and highly efficient means of obtaining enriched bioaerosol samples. Aerosols are collected into a thin and stable liquid film by the unique interaction of a superhydrophilic surface and a continuous two-phase centrifugal flow. We demonstrate that this method can provide a concentration enhancement ratio of ∼2.4 × 106 with a collection efficiency of ∼99.9% and an aerosol-into-liquid transfer rate of ∼95.9% at 500 nm particle size (smaller than a single bacterium). This transfer is effective in both laboratory and external ambient environments. The system has a low limit of detection of <50 CFU/m3air using a straightforward bioluminescence-based technique and shows significant potential for air monitoring in occupational and public-health applications.

Water-Repellent TiO2-Organic Dye-Based Air Filters for Efficient Visible-Light-Activated Photochemical Inactivation against Bioaerosols.

Recently, bioaerosols, including the 2019 novel coronavirus, pose a serious threat to global public health. Herein, we introduce a visible-light-activated (VLA) antimicrobial air filter functionalized with titanium dioxide (TiO2)-crystal violet (CV) nanocomposites facilitating abandoned visible light from sunlight or indoor lights. The TiO2-CV based VLA antimicrobial air filters exhibit a potent inactivation rate of ∼99.98% and filtration efficiency of ∼99.9% against various bioaerosols. Under visible-light, the CV is involved in overall inactivation by inducing reactive oxygen species production both directly (CV itself) and indirectly (in combination with TiO2). Moreover, the susceptibility of the CV to humidity was significantly improved by forming a hydrophobic molecular layer on the TiO2 surface, highlighting its potential applicability in real environments such as exhaled or humid air. We believe this work can open a new avenue for designing and realizing practical antimicrobial technology using ubiquitous visible-light energy against the threat of infectious bioaerosols.

Continuous Surveillance of Bioaerosols On-Site Using an Automated Bioaerosol-Monitoring System.

Real-time on-site monitoring of bioaerosols in an air environment is important for preventing various adverse health effects including respiratory diseases and allergies caused by bioaerosols. Here, we report the development of an on-site automated bioaerosol-monitoring system (ABMS) using integrated units including a wet-cyclone bioaerosol sampler, a thermal-lysis unit for extracting adenosine triphosphate (ATP), an ATP-detection unit based on the immobilization of luciferase/luciferin for bioluminescence reactions, and a photomultiplier tube-based detector. The performance of the bioaerosol detection system was verified using Escherichia coli (E. coli) as a model source. Each unit was optimized to process ∼9.6 × 105 times the concentrated ratio of collected bioaerosol samples, using a 3 min lysis time to extract ATP, and has a detection limit of ∼375 colony-forming units (CFUs)/mL with more than 30 days of stability for the immobilized-luciferase/luciferin detection unit supported by a glass-fiber conjugation pad. After the integration of all units, the ABMS achieved E. coli bioaerosol monitoring with continuous detection at 5 min intervals and a minimum detection limit of ∼130 CFU/mair3. Furthermore, the rapid responsivity and stable operation performance of the ABMS under test-bed conditions and during a field test demonstrated that the ABMS is capable of continuously monitoring bioaerosols in real-time with high sensitivity. The monitoring system developed here with immobilization strategies for bioluminescence reactions triggered by ATP extracted from collected bioaerosol samples using a simple heat-lysis method may help establish sustainable platforms to obtain stable signals for the real-time detection of bioaerosols on-site.

Electrospray patterning of yeast cells for applications in alcoholic fermentation.

Yeast cells patterned by pulsed jet electrospray showed a high alcoholic fermentation rate. Multi-dimensional patterns of individual yeast cells were produced by varying the experimental parameters of the electrospray system. The electrospray process, which employed a vibrational electric field, could control patterns of viable yeast cells at a cellular resolution. This novel system for electrospraying viable cells can be applied to biological process engineering including whole cell biochip techniques and micro fermentation processes for biochemical studies.

Evaluation of filtration characteristics and microbial recovery rates of commercial filtering facepiece respirators against airborne bacterial particles.

Many brands of filtering facepiece respirators are used against air pollution, including bioaerosols; however, studies have explored exposure to bioaerosols from the inside surfaces of respirators. We evaluated the filtration efficiencies and microbial recovery rates of commercial filtering facepiece respirators against bioaerosols. Eight filtering facepiece respirators and one surgical mask were selected, all with high market shares in the Republic of Korea and certified by national or international standards. The tested filtering facepiece respirators were installed on the head of a mannequin under various airflow velocity and relative humidity (RH) conditions. The filtration efficiency against Staphylococcus epidermidis and Escherichia coli bioaerosols, the pressure drop of the filter, and the relative recovery rates for the bacteria were evaluated. The filtration efficiency of each filtering facepiece respirator ranged from 82% to 99%, depending on the filtration grade. The pressure drop was significantly affected by variations in the surrounding RH. The mean relative recovery rates of all filtering facepiece respirators were 14 ±â€¯4.8% and 9 ±â€¯4.7% for S. epidermidis and E. coli, respectively. These results indicate that airborne microorganisms can survive and accumulate on the surfaces of filtering facepiece respirators, which may lead to harmful health outcomes. Our findings will be useful as background information for the development of commercial filtering facepiece respirators while considering their biological properties and reliable guidance to users.

Antimicrobial Air Filters Using Natural Sea Salt Particles for Deactivating Airborne Bacterial Particles.

We developed an antimicrobial air filter using natural sea salt (NSS) particles. Airborne NSS particles were produced via an aerosol process and were continuously coated onto the surface of an air filter under various deposition times. The filtration efficiency and bactericidal performance of the NSS-coated filter against aerosolized bacterial particles (Staphylococcus epidermidis, Escherichia coli) were evaluated quantitatively. The filtration efficiency of the tested filter ranged from 95% to 99% depending on the deposition time, and the bactericidal performance demonstrated efficiencies of more than 98% against both tested bacterial bioaerosols when the NSS deposition ratio was more than 500 µg/cm2. The experimental results indicated that the NSS-coated filters have the potential to be used as effective antimicrobial air filters for decreasing environmental exposure to microbial contaminants.