Atomistic Simulations of the Crystalline-to-Amorphous Transformation of γ-Al2O3 Nanoparticles: Delicate Interplay between Lattice Distortions, Stresses, and Space Charges.

The size-dependent phase stability of γ-Al2O3 was studied by large-scale molecular dynamics simulations over a wide temperature range from 300 to 900 K. For the γ-Al2O3 crystal, a bulk transformation to α-Al2O3 by an FCC-to-HCP transition of the O sublattice is still kinetically hindered at 900 K. However, local distortions of the FCC O-sublattice by the formation of quasi-octahedral Al local coordination spheres become thermally activated, as driven by the partial covalency of the Al-O bond. On the contrary, spherical γ-Al2O3 nanoparticles (NPs) (with sizes of 6 and 10 nm) undergo a crystalline-to-amorphous transformation at 900 K, which starts at the reconstructed surface and propagates into the core through collective displacements of anions and cations, resulting in the formation of 7- and 8-fold local coordination spheres of Al. In parallel, the reconstructed Al-enriched surface is separated from the stoichiometric core by a diffuse Al-depleted transition region. This compositional heterogeneity creates an imbalance of charges inside the NP, which induces a net attractive Coulombic force that is strong enough to reverse the initial stress state in the NP core from compressive to tensile. These findings disclose the delicate interplay between lattice distortions, stresses, and space-charge regions in oxide nanosystems. A fundamental explanation for the reported expansion of metal-oxide NPs with decreasing size is provided, which has significant implications for, e.g., heterogeneous catalysis, NP sintering, and additive manufacturing of NP-reinforced metal matrix composites.

Intrinsic Formamidinium Tin Iodide Nanocrystals by Suppressing the Sn(IV) Impurities.

The long search for nontoxic alternatives to lead halide perovskites (LHPs) has shown that some compelling properties of LHPs, such as low effective masses of carriers, can only be attained in their closest Sn(II) and Ge(II) analogues, despite their tendency toward oxidation. Judicious choice of chemistry allowed formamidinium tin iodide (FASnI3) to reach a power conversion efficiency of 14.81% in photovoltaic devices. This progress motivated us to develop a synthesis of colloidal FASnI3 NCs with a concentration of Sn(IV) reduced to an insignificant level and to probe their intrinsic structural and optical properties. Intrinsic FASnI3 NCs exhibit unusually low absorption coefficients of 4 × 103 cm-1 at the first excitonic transition, a 190 meV increase of the band gap as compared to the bulk material, and a lack of excitonic resonances. These features are attributed to a highly disordered lattice, distinct from the bulk FASnI3 as supported by structural characterizations and first-principles calculations.

Bilayer Dense-Porous Li7 La3 Zr2 O12 Membranes for High-Performance Li-Garnet Solid-State Batteries.

Li dendrites form in Li7 La3 Zr2 O12 (LLZO) solid electrolytes due to intrinsic volume changes of Li and the appearance of voids at the Li metal/LLZO interface. Bilayer dense-porous LLZO membranes make for a compelling solution of this pertinent challenge in the field of Li-garnet solid-state batteries (SSB). Lithium is thus stored in the pores of the LLZO, thereby avoiding i) dynamic changes of the anode volume and ii) the formation of voids during Li stripping due to increased surface area of the Li/LLZO interface. The dense layer then additionally reduces the probability of short circuits during cell charging. In this work, a method for producing such bilayer membranes utilizing sequential tape-casting of porous and dense layers is reported. The minimum attainable thicknesses are 8-10 µm for dense and 32-35 µm for porous layers, enabling gravimetric and volumetric energy densities of Li-garnet SSBs of 279 Wh kg-1 and 1003 Wh L-1 , respectively. Bilayer LLZO membranes in symmetrical cell configuration exhibit high critical current density up to 6 mA cm-2 and cycling stability of over 160 cycles at a current density of 0.5 mA cm-2 at an areal capacity limitation of 0.25 mAh cm-2 .

Two Steady-State Adsorption Modes of Phosphonic Acids on Aluminum Surfaces.

The phosphonic acid (PA) surface treatment on various metal substrates is of high industrial relevance, and the PA molecular structure significantly affects its quality. In this work, systematic variation of the PA molecular steric and electron environment helps discern two steady-state adsorption modes on an aluminum surface. The PA molecular structure was varied systematically, which included inorganic phosphorus acid, alkyl phosphonic acids, and phenyl phosphonic acids. To explore their in situ dynamics of adsorption/desorption on the electrochemically unstable aluminum, techniques such as electrochemical impedance spectroscopy and inductively coupled plasma optical emission spectrometry were employed. A range of different types of interfacial layers are formed on the aluminum surface, namely, from the dissolution-limiting physisorbed layer to a quasi-inhibiting chemisorbed layer on the aluminum surface in acidic (pH ≈ 2.2) solution. Presented findings establish the dynamic steady-state nature of this type of interface. They reveal fundamental relationships among adsorbent steric or electronic effects, the steady-state interface morphology, and the steady-state aluminum dissolution rate. The study brings also a more differentiated molecular structure-related description of the aluminum dissolution inhibition of PAs and relates it to molecular density functional theory calculations.

Fluorinated ether electrolyte with controlled solvation structure for high voltage lithium metal batteries.

The development of new solvents is imperative in lithium metal batteries due to the incompatibility of conventional carbonate and narrow electrochemical windows of ether-based electrolytes. Whereas the fluorinated ethers showed improved electrochemical stabilities, they can hardly solvate lithium ions. Thus, the challenge in electrolyte chemistry is to combine the high voltage stability of fluorinated ethers with high lithium ion solvation ability of ethers in a single molecule. Herein, we report a new solvent, 2,2-dimethoxy-4-(trifluoromethyl)-1,3-dioxolane (DTDL), combining a cyclic fluorinated ether with a linear ether segment to simultaneously achieve high voltage stability and tune lithium ion solvation ability and structure. High oxidation stability up to 5.5 V, large lithium ion transference number of 0.75 and stable Coulombic efficiency of 99.2% after 500 cycles proved the potential of DTDL in high-voltage lithium metal batteries. Furthermore, 20 µm thick lithium paired LiNi0.8Co0.1Mn0.1O2 full cell incorporating 2 M LiFSI-DTDL electrolyte retained 84% of the original capacity after 200 cycles at 0.5 C.

Atomistic Assessment of Melting Point Depression and Enhanced Interfacial Diffusion of Cu in Confinement with AlN.

The continuing trend in heterogeneous integration (i.e., miniaturization and diversification of devices and components) requires a fundamental understanding of the phase stability and diffusivity of nanoconfined metals in functional nanoarchitectures, such as nanomultilayers (NMLs). Nanoconfinement effects, such as interfacial melting and anomalous fast interfacial diffusion, offer promising engineering tools to enhance the reaction kinetics at low temperatures for targeted applications in the fields of joining, solid-state batteries, and low-temperature sintering technologies. In the present study, the phase stability and atomic mobility of confined metals in Cu/AlN NMLs were investigated by molecular dynamics, with the interatomic potential compared to the ab initio calculations of the Cu/AlN interface adhesion energy. Simulations of the structural evolution of Cu/AlN nanomultilayers upon heating in dependence on the Cu nanolayer thickness demonstrate the occurrence of interfacial premelting, a melting point depression, as well as extraordinary fast solid-state diffusion of confined Cu atoms along the defective heterogeneous interfaces. The model predictions rationalize recent experimental observations of premelting and anomalous fast interface diffusion of nanoconfined metals in nanostructured Cu/AlN brazing fillers at strikingly low temperatures.

Impact of Electrolyte Incorporation in Anodized Niobium on Its Resistive Switching.

The aim of this study was to develop memristors based on Nb2O5 grown by a simple and inexpensive electrochemical anodization process. It was confirmed that the electrolyte selection plays a crucial role in resistive switching due to electrolyte species incorporation in oxide, thus influencing the formation of conductive filaments. Anodic memristors grown in phosphate buffer showed improved electrical characteristics, while those formed in citrated buffer exhibited excellent memory capabilities. The chemical composition of oxides was successfully determined using HAXPES, while their phase composition and crystal structure with conductive filaments was assessed by TEM at the nanoscale. Overall, understanding the switching mechanism leads towards a wide range of possible applications for Nb memristors either as selector devices or nonvolatile memories.

Microstructure-Property Control in Functional Materials by Multilayer Design.

Smart microstructure and interface design in nanomultilayers allows to tailor physical properties like thermal stability, thermal conductivity and directional metal outflow for targeted applications. In this work, selected examples of nanomultilayer systems, constituted of alternating nanolayers of metals and/or nitrides, as precisely fabricated with variable textures, microstructures, grain sizes and internal stresses are presented. The role of the microstructure and stress state on selected functional properties is shown.

Hard x-ray photoelectron spectroscopy: a snapshot of the state-of-the-art in 2020.

Hard x-ray photoelectron spectroscopy (HAXPES) is establishing itself as an essential technique for the characterisation of materials. The number of specialised photoelectron spectroscopy techniques making use of hard x-rays is steadily increasing and ever more complex experimental designs enable truly transformative insights into the chemical, electronic, magnetic, and structural nature of materials. This paper begins with a short historic perspective of HAXPES and spans from developments in the early days of photoelectron spectroscopy to provide an understanding of the origin and initial development of the technique to state-of-the-art instrumentation and experimental capabilities. The main motivation for and focus of this paper is to provide a picture of the technique in 2020, including a detailed overview of available experimental systems worldwide and insights into a range of specific measurement modi and approaches. We also aim to provide a glimpse into the future of the technique including possible developments and opportunities.

Electrophoretic Deposition of Nanoporous Oxide Coatings from Concentrated CuO Nanoparticle Dispersions.

Electrophoretic deposition (EPD) of nanoporous oxide coatings is an interesting research avenue owing to the experimental simplicity and broad scope of applications and materials. In this study, the properties of concentrated (up to 5000 mg/L), nonaqueous CuO nanoparticle (NP) dispersions were tailored to produce micrometer-thick, nanoporous CuO films by EPD. In particular, we performed a systematic investigation of the electrophoretic mobilities and size distributions of dispersed CuO aggregates and developing agglomerates in different organic solvents for concentrations ranging from 50 to 5000 mg/L with and without surfactant addition. Time-resolved dynamic light scattering analyses showed that aggregate mobilities and agglomeration rates decrease with increasing hydrocarbon chain length of the organic solvent (from ethanol to hexanol) and thus with increasing viscosity. The highest electrophoretic mobility was obtained for CuO NP aggregates and agglomerates dispersed in ethanol as a solvent. However, the addition of ≥0.5 wt % acetylacetone as a surfactant is required to stabilize these dispersions for subsequent EPD and at the same time introduce a net attractive (electrostatic) interaction between neighboring agglomerates on the substrate to promote layer formation during the EPD step. The produced micrometer-thick nanoporous CuO coatings can serve as high surface area nanostructured materials or nanoporous scaffolds in catalysis, combustion, propellants, and nanojoining.

In Vivo Shaping of Inorganic Functional Devices using Microalgae.

The usage of biomineralization processes performed by living microalgae to create 3D nanostructured materials are advantageous compared to conventional synthesis routes. Exploitation of in vivo shaping using living cells leads to inorganic intricate biominerals, produced with low environmental impact. Since biomineralization processes are genetically controlled, the formation of nanostructured materials is highly reproducible. The shells of microalgae, like coccoliths, are particularly of great interest. This study shows the generation of mesoporous highly structured functional materials with induced optoelectronical properties using in vivo processes of the microalga species Emiliania huxleyi. It demonstrates the metabolically driven incorporation of the lanthanide terbium into the coccoliths of E. huxleyi as a route for the synthesis of finely patterned photoluminescent particles by feeding the microalgae with this luminescent element. The resulting green luminescent particles have hierarchical ordered pores on the nano- and microscale and may act as powerful tools for many applications; they may serve as imaging probes for biomedical applications, or in microoptics. The luminescent coccoliths combine a unique hierarchical structure with a characteristic luminescence pattern, which make them superior to conventional produced Tb doted material. With this study, the possibility of the further exploitation of coccoliths as advanced functional materials for nanotechnological applications is given.

Local Deformation-Controlled Fast Directional Metal Outflow in Metal/Ceramic Nanolayer Sandwiches upon Low Temperature Annealing.

Precise nanoindentation on AlN/Cu/AlN nanolayer sandwiches has been conducted by using an atomic force microscope to promote fast and directional metal (Cu) outflow upon heating at low temperatures. Local plastic deformation during indentation results in the generation of high defect densities and stress gradients, which not only effectively reduce the activation energies for fast in-plane diffusion but also direct the in-plane transport of confined Cu to the indent location. In addition, a steep chemical potential gradient of O will be established across the AlN barrier upon exposure to air, which drives fast outward diffusion of Cu along defective pathways in the top AlN layer at the indent location. Selective and fast Cu metal outflow can thus be achieved at the indent locations upon annealing at a relatively low temperature of 350 °C for 5 min in air. The microstructures and phase boundaries of the AlN barrier and confined Cu nanolayers are unperturbed outside the plastically deformed region and remain metastable after annealing at 350 °C. By changing the surface processing modes, patterned nanoparticles and isolated nanowire structures can be fabricated straightforwardly. Such local deformation-controlled directional mass transport phenomena can be utilized to manipulate materials down to the atomic scale for designing functional nanoarchitectures for nanophotonic and nanoelectronic applications.

Cost-effective sol-gel synthesis of porous CuO nanoparticle aggregates with tunable specific surface area.

CuO nanoparticles (NPs) are applied in various key technologies, such as catalysis, energy conversion, printable electronics and nanojoining. In this study, an economic, green and easy-scalable sol-gel synthesis method was adopted to produce submicron-sized nanoporous CuO NP aggregates with a specific surface area > 18 m²/g. To this end, a copper-carbonate containing precursor was precipitated from a mixed solution of copper acetate and ammonia carbonate and subsequently calcinated at T ≥ 250 °C. The thus obtained CuO nanopowder is composed of weakly-bounded agglomerates, which are constituted of aggregated CuO NPs with a tunable size in the range of 100-140 nm. The CuO aggregates, in turn, are composed of equi-axed primary crystallites with a tunable crystallite size in the range of 20-40 nm. The size and shape of the primary CuO crystallites, as well as the nanoporosity of their fused CuO aggregates, can be tuned by controlled variation of the degree of supersaturation of the solution via the pH and the carbonate concentration. The synthesized submicron-sized CuO aggregates can be more easily and safely processed in the form of a solution, dispersion or paste than individual NPs, while still offering the same enhanced reactivity due to their nanoporous architecture.

Anodizing of Self-Passivating W xTi1- x Precursors for W xTi1- xO n Oxide Alloys with Tailored Stability.

TiO2 and WO3 are two of the most important, industrially relevant earth-abundant oxides. Although both materials show complementary functionality and are promising candidates for similar types of applications such as catalysis, sensor technology, and energy conversion, their chemical stability in reactive environments differs remarkably. In this study, anodic barrier oxides are grown on solid-solution W xTi1- x alloy precursors covering a wide compositional range (0 ≤ x ≤ 1) with the goal of creating functional oxides with tailored stability. A strong Ti-cation enrichment in the surface region of the grown W xTi1- xO n layer is observed, which can be controlled by both the anodizing conditions and precursor composition. For Ti concentrations above 50 at. %, a continuous nanometer-thick TiO2 protective coating is achieved on top of a homogeneous W xTi1- xO n film as evidenced by X-ray photoelectron spectroscopy and transmission electron microscopy analyses. A comprehensive electrochemical assessment demonstrates a very stable passivation of the surface in both acidic and alkaline environments. This increase in chemical stability correlates directly with the presence of this protective TiO2 film. The results of this work provide insights into the oxidation behavior of W1- xTi x alloys, but more importantly demonstrate how controlled oxidation of self-passivating alloys can lead to oxide alloys with thin, protective surface layers that otherwise would require more sophisticated deposition methods.

Tailoring Fast Directional Mass Transport of Nano-Confined Ag-Cu Alloys upon Heating: Effect of the AlN Barrier Thickness.

This study addresses the phase stability and atomic mobility of Ag-Cu40at.% nano-alloys confined by AlN in a nanomultilayered configuration during thermal treatment. To this end, nanomultilayers (NMLs) with a fixed Ag-Cu40at.% nanolayer thickness of 8 nm and a AlN barrier nanolayer with variable thickness of 4, 8, or 10 nm were deposited by magnetron sputtering on sapphire substrates and subsequently isothermally annealed for 5 or 20 min in air in the range of 200-500 °C. The microstructure of the as-deposited and heat-treated NMLs was analyzed by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and energy dispersive spectroscopy. Annealing of the thicker AlN barrier layers at T > 300 °C leads to the formation of an interconnected network of line-shaped Cu(O) protrusions on the annealed NML surface. The well-defined outflow pattern of Cu(O) originates from the thermally induced surface cracking of the top AlN barriers with subsequent fast mass transport of Cu along the Cu/AlN interfaces toward the surface cracks. The thinnest (i.e., 4 nm thick) AlN barrier layers exhibit a relatively open grain boundary structure and act as nanoporous membranes upon heating, resulting in the formation of a dense and homogenous distribution of Cu(O) and Ag droplets on the NML surface. These findings demonstrate that the microstructure (i.e., layer thicknesses, interface coherency, and texture) of hybrid nanolaminates can be tuned to provide defined pathways for fast, directional transport of the confined metal to the surface at relatively low temperatures, which might open new routes for low-temperature bonding of micro- and nano-scaled systems.

Modeling of Interface and Internal Disorder Applied to XRD Analysis of Ag-Based Nano-Multilayers.

Multilayered structures are a promising route to tailor electronic, magnetic, optical, and/or mechanical properties and durability of functional materials. Sputter deposition at room temperature, being an out-of-equilibrium process, introduces structural defects and confers to these nanosystems an intrinsic thermodynamical instability. As-deposited materials exhibit a large amount of internal atomic displacements within each constituent block as well as severe interface roughness between different layers. To access and characterize the internal multilayer disorder and its thermal evolution, X-ray diffraction investigation and analysis are performed systematically at differently grown Ag-Ge/aluminum nitride (AlN) multilayers (co-deposited, sequentially deposited with and without radio frequency (RF) bias) samples and after high-temperature annealing treatment. We report here on model calculations based on a kinematic formalism describing the displacement disorder both within the multilayer blocks and at the interfaces to reproduce the experimental X-ray diffraction intensities. Mixing and displacements at the interface are found to be considerably reduced after thermal treatment for co- and sequentially deposited Ag-Ge/AlN samples. The application of a RF bias during the deposition causes the highest interface mixing and introduces random intercalates in the AlN layers. X-ray analysis is contrasted to transmission electron microscopy pictures to validate the approach.

Observation and Origin of Extraordinary Atomic Mobility at Metal-Semiconductor Interfaces at Low Temperatures.

Extraordinarily high mobility of Si and Ge atoms at semiconductor (Si, Ge)-metal (Al) interfaces is observed at temperatures as low as 80 K during thin metal film deposition. In situ x-ray photoemission spectroscopic valence-band measurements reveal a changed chemical bonding nature of the semiconductor atoms, from localized covalentlike to delocalized metalliclike, at the interface with the Al metal. The resulting delocalized bonding nature of the interfacial semiconductor atoms brings about the observed extreme enhancement of their mobility. The finding opens avenues for tailoring reaction kinetics and phase transformations in nanostructured materials, as functional thin-film systems, at ultralow temperatures by dedicated interfacial design.

Real-time visualization of convective transportation of solid materials at nanoscale.

Convective transportation of materials in the solid state occurring in a prototype solid bilayer system of Al and Si with negligible mutual solubility has been directly imaged in real time at nanoscale using a valence energy-filtered transmission electron microscope. Such solid-state convection is driven by the stress gradient developing in the bilayer system due to the amorphous to crystalline phase transformation of the Si sublayer. The process is characterized by compression experienced in the Si phase crystallizing within the Al sublayer, as well as by the development of mushroom-shaped "plumes" of Al nanocrystals in the Si sublayer as a result of compressive stress relaxation and discrete, new nucleation of crystalline Al. The real-time, atomistic observation and the thus-obtained fundamental understanding of solid-state convection enable highly sophisticated applications of such a complex process in advanced fabrication and processing of nanomaterials and solid-state devices.

Quantum confinement drives macroscopic stress oscillations at the initial stage of thin film growth.

Functionalization of thin-film heterostructures on the basis of their electrical, optical and magnetic properties, requires precise control of the film stresses that develop during the growth process. By using real-time in situ stress measurements, the present study reveals strikingly that the in-plane film stress oscillates with increasing film thickness at the initial stage of epitaxial Al(111) film growth on a Si(111)-√3×√3-Al surface, with a periodicity of 2 times the Fermi wavelength of bulk Al and a stress variation from maximum to minimum as large as 100 MPa. Such macroscopic stress oscillations are shown to be caused by quantum confinement of the free electrons in the ultrathin epitaxial metal film. The amplitude, period, and phase of the observed stress oscillations are consistent with predictions based on the free electron model and continuum elasticity.

Biomimetic formation of titania thin films: effect of amino acids on the deposition process.

Different types of amino acids have been used as additives to control the aqueous deposition of titanium dioxide thin films on single-crystal Si wafers. Thin titania films can be obtained through a chemical bath deposition (CBD) process using TiCl4 as a precursor in an aqueous solution at temperatures below 100 °C. The addition of amino acids to the deposition solution was shown to reduce the thickness and roughness of the films and to increase their density. These protein building blocks were employed to modify the deposition rate as well as the size of aggregates that form the film. The thickness, crystallinity, morphology and composition of the grown films were characterized by a variety of techniques, including XRD, XPS, AFM and SEM. The consequences of the type of the amino acid additive (and its concentration in the solution) on the microstructural evolutions of the deposed films are thus revealed and discussed on the basis of the organic-inorganic interactions in solution and at the film surface.