Fe3O4 nanoparticles as matrix solid-phase dispersion extraction adsorbents for the analysis of thirty pesticides in vegetables by ultrahigh-performance liquid chromatography-tandem mass spectrometry.

Herein we report the first example of Fe3O4 nanoparticles (FNPs) being used as single-matrix solid-phase dispersion (MSPD) adsorbents for the extraction of 30 representative pesticides from vegetables. This study was aimed at analyzing the extracted samples using ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Various condition parameters, such as the eluent, volume of the eluent, and amount of FNPs were optimized to achieve good sensitivity and precision for the elution and extraction of the analytes. The developed method was validated using matrices consisting of eight vegetables (lettuce, cucumber, carrot, tomato, pepper, shallot, Chinese flowering cabbage, and cabbage) spiked with 30 pesticides at concentrations of 0.01, 0.1, and 1.0 mg/kg. The recoveries of the 30 pesticides (organophosphorus, triazole, carbamate, nicotine, amide, and other different structures of pesticides) were in the range 71.0-110.8% (n = 5) (except those of prothioconazole and dinotefuran), with relative standard deviations lower than 13.5% in all the matrices under optimal conditions. The matrix effects were observed by comparing the slope of the matrix-matched standard calibration curve with that of the solvent. However, the matrix effects of the eight vegetables did not show evident regularities. For pepper, tomato, and shallot, a sizable number of pesticides (24, 21, and 21, respectively) showed suppressive matrix effects. On the other hand, for cucumber, Chinese flowering cabbage, and cabbage, a good number of pesticides (19, 18, and 15, respectively) showed negligible matrix effects. Furthermore, for carrot matrices, 21 pesticides showed a matrix enhancement effect. Excellent linearity was achieved at pesticide concentrations of 0.01-1.0 mg/L, and the limits of quantification (LOQ) for the developed method reached 0.01 mg/kg (except that for dinotefuran, which was 0.1 mg/kg), based on the spiked test. The developed method was successfully employed in the analysis of real samples in Nanning, China, and three pesticide residues (halosulfuron methyl, tebuconazole, and azoxystrobin) were commonly detected in vegetable samples. In the present study, a reliable method-validation performance and excellent cleanup effects were observed by using the modified MSPD method consisting of the FNPs in the cleanup step.

Simultaneous analysis of indaziflam and its metabolites in pitaya using dispersive solid phase extraction coupled with liquid chromatography coupled with tandem mass spectrometry.

A simple and efficient multiresidue method using dispersive solid phase extraction and liquid chromatography coupled with tandem mass spectrometry was developed for the targeted analysis of indaziflam and its five metabolites (indaziflam-diaminotriazine, indaziflam-carboxylic acid, indaziflam-triazine indanone, indaziflam-hydroxyethyl, and indaziflam-olefin) in pitaya samples (including roots, plants, flowers, peels, pulp, and whole fruit). The analytes were extracted with acetonitrile, and the extracts were purified using multiwalled carbon nanotubes. The method was validated using pitaya samples spiked at 0.5, 5, and 50 µg/kg, and the average recoveries varied from 61.1 to 103.7% with relative standard deviations lower than 12.7% (n = 5). This method exhibited sufficient linearity within the concentration range of 0.1-100 µg/L. The limits of detection and quantification were in the ranges of 0.001-0.1 and 0.003-0.3 µg/kg, respectively. The method was successfully applied to analyze pitaya samples in Nanning, and no indaziflam or its metabolites were detected in the samples analyzed.

Anatomical location differences between mutated and wild-type isocitrate dehydrogenase 1 in low-grade gliomas.

Anatomical location of gliomas has been considered as a factor implicating the contributions of a specific precursor cells during the tumor growth. Isocitrate dehydrogenase 1 (IDH1) is a pathognomonic biomarker with a significant impact on the development of gliomas and remarkable prognostic effect. The correlation between anatomical location of tumor and IDH1 states for low-grade gliomas was analyzed quantitatively in this study. Ninety-two patients diagnosed of low-grade glioma pathologically were recruited in this study, including 65 patients with IDH1-mutated glioma and 27 patients with wide-type IDH1. A convolutional neural network was designed to segment the tumor from three-dimensional magnetic resonance imaging images. Voxel-based lesion symptom mapping was then employed to study the tumor location distribution differences between gliomas with mutated and wild-type IDH1. In order to characterize the location differences quantitatively, the Automated Anatomical Labeling Atlas was used to partition the standard brain atlas into 116 anatomical volumes of interests (AVOIs). The percentages of tumors with different IDH1 states in 116 AVOIs were calculated and compared. Support vector machine and AdaBoost algorithms were used to estimate the IDH1 status based on the 116 location features of each patient. Experimental results proved that the quantitative tumor location measurement could be a very important group of imaging features in biomarker estimation based on radiomics analysis of glioma.

Dynamic curvature topography for evaluating the anterior corneal surface change with Corvis ST.

BACKGROUND: The measurement of dynamic parameters, such as the length of applanation and the amplitude of deformation, is significant for evaluating corneal properties. Most of the corneal properties (related to shape) including the anterior corneal curvature and the thickness of cornea can be easily measured using some existing techniques. However, they only provide the static or pseudo-dynamic analysis. Based on Corvis ST images, the dynamic features after corneal boundaries detection and parameter estimation will be helpful for corneal analysis. MATERIAL: The study included 40 eyes in normal group (ranging from 19 to 45 years old) and 30 eyes in keratoconus group (ranging from 16 to 40 years old). These eyes were examined by Corvis ST and for each one a sequence of 140 images was obtained. Besides, 11 subjects of each group were also tested by Pentacam. METHODS: By analyzing the video from the Corvis ST imaging, the fully dynamic curvature topography is proposed to evaluate the response of the anterior corneal surface to the air puff. The new method not only quantitatively measures the intact variation of anterior corneal surface but also provides an intuitive way to observe the dynamic change of the anterior corneal surface in the whole air stream process. The proposed method consists of three main steps: cornea segmentation, curvature estimation and integrated visualization. An automatic segmentation method based on the combination of prior knowledge with phase symmetry and asymmetry theory is firstly presented to detect the corneal boundaries. The Landau-new method is then used to estimate the anterior corneal surface. The corneal dynamic topography is finally obtained by combining the dynamic parameters with the original Corvis ST video, which is an improvement of the fusion technique proposed by Li et al. RESULTS AND CONCLUSION: By comparing the segmentation results with manual method and built-in method of Corvis ST, the accuracy and robustness of our proposed segmentation method is demonstrated. The correctness of the estimated corneal anterior curvatures is also evaluated by comparing it with that of Pentacam which is considered to be able to provide the first-class measurement currently. The dynamic topography may be used to distinguish the dynamic behavior of normal corneas from that of keratoconus.

Gabor-based anisotropic diffusion for speckle noise reduction in medical ultrasonography.

In ultrasound (US), optical coherence tomography, synthetic aperture radar, and other coherent imaging systems, images are corrupted by multiplicative speckle noise that obscures image interpretation. An anisotropic diffusion (AD) method based on the Gabor transform, named Gabor-based anisotropic diffusion (GAD), is presented to suppress speckle in medical ultrasonography. First, an edge detector using the Gabor transform is proposed to capture directionality of tissue edges and discriminate edges from noise. Then the edge detector is embedded into the partial differential equation of AD to guide the diffusion process and iteratively denoise images. To enhance GAD's adaptability, parameters controlling diffusion are determined from a fully formed speckle region that is automatically detected. We evaluate the GAD on synthetic US images simulated with three models and clinical images acquired in vivo. Compared with seven existing speckle reduction methods, the GAD is superior to other methods in terms of noise reduction and detail preservation.

[Determination of trace Au in mine sample by inductively coupled plasma atomic emission spectroscopy].

A method for the determination of trace gold by inductively coupled plasma atomic emission spectrometry (ICP-AES) in mine sample was proposed. The instrument parameters were optimized and the media of solution and interferences were studied systemically. The results showed that in less than 10% (phi) aqua regia medium, the acids had no influences on the determination, and after removing common cations in mineral samples by using 10% hydrochloric acid(phi), the residual matrix elements had no effect on the determination of Au with ICP-AES. The silicon in samples had serious spectral interference to Au 208. 2 nm, and the spectral interference was corrected with interference coefficient using the 251.6 nm silicon line. With 10% HCl to remove the matrix and interference correction coefficient to eliminate the interference of silicon, trace gold in high-sulfur tailings samples was determined, the result was identical with the reference values by the method of enrichment with activated carbon-atomic absorption spectrometry. Under the experimental conditions, the detection limit for gold in mine sample was 0.10 g x t(-1).

[Correction of spectral interferences with mutual interference coefficient matrix for determination of impurities in Bi-based superconductor powder by inductively coupled plasma emission spectrometry].

In the present paper a method was proposed for the determination of Fe, Cr, Ni, Si, Al and Ba in Bi-based superconductor powder (BSCCO, Bi(2-x), Pb(x)Sr2Ca2Cu3O8) by inductively coupled plasma atomic emission spectrometry(ICP-AES). The operation parameters for ICP-AES were optimized, and the influences of acid kind and concentration were examined. The interferences of matrix elements Bi, Sr, Pb, Ca and Cu in Bi-based superconductor powder on the determination of impurities were studied systematically. The interference coefficients of Bi, Sr, Pb, Ca and Cu were obtained for each target elements respectively, and the mutual interferences matrix was constituted with the above coefficients. The equated concentrations of background from matrix elements were calculated by interferences coefficients matrix and concentrations of Bi, Sr, Pb, Ca and Cu using Gaussian elimination with full pivoting method. Then the concentrations of impurities were obtained by calculation of differences. By means of the mutual interference coefficients matrix, the artificial sample was determined for the target elements with the recovery coefficient of 99.5%-100.5%. The superconductor powers were analysed with satisfactory results also, and the results were identical with the reference values from ICP-MS.