Facile synthesis of Ag lattice doped mesoporous In2O3 nanocubes for high performance ethanol sensing.

Ag lattice doped In2O3 with a mesoporous structure was synthesized through a combination of hydrothermal and calcination methods. The structural and morphological characteristics were assessed using XRD, SEM, TEM, TGA, BET, and XPS analyses. Gas sensing measurements revealed that the 7.0 mol% Ag-doped In2O3 sensor displayed a response of 420 towards 100 ppm ethanol at 140 °C, which was 19 times higher than that of the pure In2O3 gas sensor. Density functional theory calculations indicated that Ag-doped In2O3 exhibited enhanced adsorption performance, higher adsorption energy, and electron transfer, resulting in higher sensitivity to ethanol. These findings were also supported by the electronic band structure, work function, and DOS analyses. These results indicated that the Ag doped mesoporous In2O3 has high potential for the preparation of high-performance ethanol sensors in practical applications.

Self-Assembled Bifunctional Copper Hydroxide/Gold-Ordered Nanoarray Composites for Fast, Sensitive, and Recyclable SERS Detection of Hazardous Benzene Vapors.

Volatile organic compounds (VOCs), particularly monoaromatic hydrocarbon compounds (MACHs), pose a potential risk to the atmospheric environment and human health. Therefore, the progressive development of efficient detection methodologies is a pertinent need, which is still a challenge at present. In this study, we present a rapid and sensitive method to detect trace amounts of MACHs using a bifunctional SERS composite substrate. We prepared an Au/SiO2 enhanced layer and a porous Cu(OH)2 adsorption layer via microfluidic-assisted gas-liquid interface self-assembly. The composite substrate effectively monitored changes in benzaldehyde using time-varying SERS spectra, and track-specifically identified various VOCs such as benzene, xylene, styrene, and nitrobenzene. In general, the substrate exhibited a rapid response time of 20 s to gaseous benzaldehyde, with a minimum detection concentration of less than 500 ppt. Further experimental assessments revealed an optimum Cu(OH)2 thickness of the surrounding adsorption layer of 150 nm, which can achieve an efficient SERS response to MACHs. Furthermore, the recoverable and reusable property of the composite substrate highlights its practicality. This study presents a straightforward and efficient approach for detecting trace gaseous VOCs using SERS, with significant implications in the designing of SERS substrates for detecting other VOCs.

Surface charge modulation enhanced high stability of gold oxidation intermediates for electrochemical glucose sensors.

Rapid and accurate blood glucose detection is significant for diagnosing and treating diabetes. Herein, ultra-low-content gold nanoparticles were loaded on different metal foams and applied to electrochemical enzyme-free glucose sensors via simple displacement reactions. The structures and properties of the produced catalysts were determined by various characterization methods. The performance of the glucose sensor was examined in relation to the interactions between three different metal substrates and gold. The one with the best performance is the sample of gold nanoparticles grown on copper foam (Au300 Cu Foam). It has the advantage of a porous three-dimensional network, a large electroactive surface area, and the high catalytic activity of gold. The combination of Cu and Au increased the valence state of Au, thus favoring the catalytic activity for glucose oxidation. Cyclic voltammetry and chronoamperometry measurements revealed that Au is responsible for the electrocatalytic oxidation of glucose. The sensitivity of Au300 Cu Foam was found to be 10 839 µA mM-1 cm-2 in the linear range of 0.00596-0.0566 mM, with a detection limit (LOD) of 0.223 µM, and 2-3 s response time at 0.4 V vs. Ag/AgCl. The Au300 Cu Foam glucose sensor also offered outstanding stability and anti-interference performance. The prepared Au300 Cu Foam electrode was also successfully applied to detect different levels of glucose in human body fluids, such as saliva. These characteristics make Au300 Cu Foam promising for non-invasive glucose detection.

Platelet-derived microRNA-223 attenuates TNF-α induced monocytes adhesion to arterial endothelium by targeting ICAM-1 in Kawasaki disease.

Background: Kawasaki disease (KD) is an acute vasculitis that may result in permanent coronary artery damage with unknown etiology. Endothelial cell (EC) dysfunction and platelet hyperactivity are the hallmarks of KD. Platelets are involved in the development of endothelial dysfunction. MiR-223 transferred by platelet microparticles (PMPs) has been found to involve in the functional regulation of endothelial cells in sepsis. However, the role of platelet-derived miR-223 in endothelial dysfunction has not yet been investigated in KD. Objectives: We seek to investigate the role of platelet-derived miR-223 in endothelial dysfunction of KD vasculopathy. Methods and results: Forty-five acute KD patients and 45 matched controls were randomly recruited in the study. When co-cultured with human coronary artery endothelial cells (HCAECs), KD platelets with higher levels of miR-223 were incorporated into HCAECs, resulting in the horizontal transfer of miR-223. Using KD platelets, PMPs, and platelet-releasate from the same amount of blood co-cultured with HCAECs, we found the increased expression of miR-223 in HCAECs was primarily derived from KD platelets, rather than PMPs or free miRNAs from platelet- releasate. KD platelet-derived miR-223 attenuated TNF-α induced intercellular cell adhesion molecule-1 (ICAM-1) expression in HCAECs. KD platelet-derived miR-223 also suppressed the monocyte adhesion to HCAECs. In vivo, platelet-specific miR-223 knockout (PF4-cre: miR-223flox/flox) C57BL/6 mice and miR-223flox/flox C57BL/6 mice were used. Using Lactobacillus casei cell wall extract (LCWE) to establish KD murine model, we showed that in LCWE-injected PF4-cre: miR-223flox/flox mice, deficiency of platelet-miR-223 exacerbates the medial thickening of the abdominal aorta, increased ICAM-1 expression with concomitant CD45+ inflammatory cells infiltration into the endothelium compared to LCWE-injected miR-223flox/flox mice. Conclusions: The horizontal transfer of platelet-derived miR-223 suppresses the expression of ICAM-1 in HCAECs, which at least in part attenuates leukocyte adhesion, thereby reducing endothelial damage in KD vasculitis.

Bi-Functional Fe3 O4 /Au/CoFe-LDH Sandwich-Structured Electrocatalyst for Asymmetrical Electrolyzer with Low Operation Voltage.

The reduction of the overall electrolysis potential to produce hydrogen is a critical target for fabricating applicable hydrogen evolution cells. Sandwich-structured Fe3 O4 /Au/CoFe-LDH is synthesized via a spontaneous galvanic displacement reaction. A series of structural characterizations indicate the successful synthesis of sandwich-structured Fe3 O4 /Au/CoFe-LDH electrocatalyst. The trace amount of Au laying between Fe3 O4 and CoFe-LDH significantly improves the intrinsic conductivity and catalytic activity of the composite catalyst. In-depth investigations indicate that Fe3 O4 and CoFe-LDH are responsible for the electrocatalytic hydrogen evolution reaction (HER) whereas Au is responsible for the electrocatalytic glucose oxidation (GOR). The electrocatalytic tests indicate Fe3 O4 /Au/CoFe-LDH offers excellent electrocatalytic activity and stability for both HER and GOR, even at high current density (i.e., 1000 mA cm-2 ). Further electrochemistry examinations in a two-compartment cell with a two-electrode configuration show that Fe3 O4 /Au/CoFe-LDH can significantly reduce the overall potential for this asymmetrical cell, with only 0.48 and 0.89 V required to achieve 10 mA cm-2 current density with and without iR-compensation, which is the lowest overall potential requirement ever reported. The design and synthesis of Fe3 O4 /Au/CoFe-LDH pave a new way to electrochemically produce hydrogen and gluconate under extremely low cell voltage, which can readily match with a variety of solar cells.

Ground water copper levels in the seawater intrusion area and the possible physical and chemical dynamics.

Seawater intrusion, a common geological process along the coastal zones, changes the groundwater properties, which are potentially associated with the groundwater copper (Cu) levels. However, there are no studies on the details of groundwater Cu levels affected by seawater intrusion. The groundwater in the seawater intrusion area of Buzhuang Town was sampled to detect the effect of seawater intrusion on groundwater Cu levels. The Cu levels in the local groundwater range between 0.92 and 4.99 µg L-1, which averages about 5 times than those in the non-intrusion area. The Cu deviations (ΔCu) are positive, and increase with more intrusion of seawater. Simulation experiments also confirm that more Cu leaches from sediments when more seawater or brine water is mixed in. The groundwater Cu levels are positively correlated with TDS, Cl-, Br-, SO42-, HCO3-, Na+, K+ and Mg2+. The Cu-bearing minerals in the local groundwater are under-saturated. The CEC of the sediment for the simulated experiments decreases with more mixture of seawater or brine water. CuCO03, Cu(OH)02, CuHCO3+, Cu(CO3)22-, CuCl2-, Cu2+ species in the local groundwater are obviously higher than those in the non-intrusion area, and the levels of CuCl2-, Cu+, CuCO3, Cu2+, CuSO4, CuOH+, CuCl+, Cu2(OH)22+ are positively correlated with the degree of seawater intrusion, indicating the important role of Cl-, HCO3-, OH- complexation on groundwater Cu levels. Thus, ion competition and complexation are the important dynamics of groundwater Cu enrichment along the coastal zones. A new enrichment model of groundwater Cu in the seawater intrusion area is presented. Seawater intrusion should be taken into consideration when the enrichment mechanisms of groundwater Cu are discussed.

The experimental study of fluorine-leaching ability of granite with different solutions: A new insight into the dynamic of groundwater fluorine levels along coastal zones.

Drinking-water fluorosis is universal along coastal zones, and the seawater or brine water intrusion is occasionally supposed to enrich groundwater fluorine levels. However, there is no conclusive proof, and the laws and mechanisms remain ambiguous. Granite, the common fluorine-bearing rock, is selected and experimented upon to reveal the characteristics and laws of fluorine's leaching ability during the intrusion of seawater. The fluorine-leaching ability increases with the increasing ratios of seawater or brine water, the increasing levels of NaCl or NaHCO3, and the decreasing levels of CaCl2. Such results directly confirm that seawater or brine water intrusion, as well as the conditions of higher Na+, HCO3- and lower Ca2+, promotes fluorine-leaching ability from granite. The intensities of SiOSi, SiOFe, SiOAl bonds decrease but those of OH bonds increase with a higher ratio of seawater or brine water, the higher levels of NaCl or NaHCO3, and the lower levels of CaCl2. This indicates the more silicate dissolution and stronger OH-F exchange evoked by seawater or brine water intrusion are responsible for the higher fluorine-leaching from granite. Therefore, the process of seawater or brine water intrusion should be important for the groundwater enrichment dynamics along coastal zones.

Childhood injuries from motor vehicle-pedestrian collisions in Wuhan, The People's Republic of China.

OBJECTIVES: To examine motor vehicle-pedestrian collision injuries resulting in hospitalisation among children admitted into Wuhan Children's Hospital, The People's Republic of China. METHODS: From the 1993 to 2004 inpatient data of Wuhan Children's Hospital, we identified injury cases from motor vehicle traffic crashes among children aged 18 years or less using the discharge diagnosis defined by the International Classification of Diseases, Ninth Revision, Clinical Modification (ICD-9-CM). We examined characteristics of injuries from motor vehicle traffic crashes (ICD-9-CM = E810-E819) and then calculated the proportion of injuries from motor vehicle-pedestrian collisions (ICD-9-CM = E814) among all hospitalisations for childhood injuries (ICD-9-CM = 800-959). The trend of injuries from motor vehicle-pedestrian collisions from 1993 to 2004 was described. RESULTS: Of the 12,939 injuries resulting in hospitalisation among children admitted into Wuhan Children's Hospital during 1993-2004, a total of 528 injuries were caused by motor vehicle traffic crashes. The majority of the injured children in motor vehicle traffic crashes were males (59.3%). In comparison with other traffic injuries, a higher proportion of motor vehicle-pedestrian collisions occurred among children aged 12-15 years. Motor vehicle-pedestrian collision injuries resulted in significantly longer lengths of stay in the hospital than other motor vehicle traffic injuries (19.4 days versus 14.3 days, respectively; t-test = 2.59, p-value < 0.05). The percentage of motor vehicle-pedestrian collision injuries among all hospitalisations for childhood injuries increased significantly from 1.6% (95% confidence interval [CI] = 1.2-2.1) in 1993 to 3.1% (95% CI = 2.7-3.6) in 2004 (p < 0.05). CONCLUSIONS: Hospitalisations for injuries from motor vehicle-pedestrian collisions at this large children's hospital increased significantly in the past decade. These data underscore the need for additional research and a major concerted effort to prevent motor vehicle-pedestrian collisions among children in China.