Research progress of fluorescent composites based on cyclodextrins: Preparation strategies, fluorescence properties and applications in sensing and bioimaging.

Fluorescence analysis has been regarded as one of the commonly used analytical methods because of its advantages of simple operation, fast response, low cost and high sensitivity. So far, various fluorescent probes, with noble metal nanoclusters, quantum dots, organic dyes and metal organic frameworks as representatives, have been widely reported. However, single fluorescent probe often suffers from some deficiencies, such as low quantum yield, poor chemical stability, low water solubility and toxicity. To overcome these disadvantages, the introduction of cyclodextrins into fluorescent probes has become a fascinating approach. This review (with 218 references) systematically covers the research progress of fluorescent composites based on cyclodextrins in recent years. Preparation strategies, fluorescence properties, response mechanisms and applications in sensing (ions, organic pollutants, bio-related molecules, temperature, pH) and bioimaging of fluorescent composites based on cyclodextrins are summarized in detail. Finally, the current challenges and future perspectives of these composites in relative research fields are discussed.

Development of Broad-Spectrum Nanobodies for the Therapy and Diagnosis of SARS-CoV-2 and Its Multiple Variants.

The continuous evolution of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has evaded the efficacy of previously developed antibodies and vaccines, thus remaining a significant global public health threat. Therefore, it is imperative to develop additional antibodies that are capable of neutralizing emerging variants. Nanobodies, as the smallest functional single-domain antibodies, exhibit enhanced stability and penetration ability, enabling them to recognize numerous concealed epitopes that are inaccessible to conventional antibodies. Herein, we constructed an immune library based on the immunization of alpaca with the S1 subunit of the SARS-CoV-2 spike protein, from which two nanobodies, Nb1 and Nb2, were selected using phage display technology for further characterization. Both nanobodies, with the binding residues residing within the receptor-binding domain (RBD) region of the spike, exhibited high affinity toward the S1 subunit. Moreover, they displayed cross-neutralizing activity against both wild-type SARS-CoV-2 and 10 ο variants, including BA.1, BA.2, BA.3, BA.5, BA.2.75, BF.7, BQ.1, EG.5.1, XBB.1.5, and JN.1. Molecular modeling and dynamics simulations predicted that both nanobodies interacted with the viral RBD through their complementarity determining region 1 (CDR1) and CDR2. These two nanobodies are novel tools for the development of therapeutic and diagnostic countermeasures targeting SARS-CoV-2 variants and potentially emerging coronaviruses.

Preparation of dual-functional epitope imprinted polymers for the enrichment of transferrin.

Transferrin (TRF), a glycoprotein involved in cellular iron uptake, is a potential target for the diagnosis and treatment of several diseases and cancers. Therefore, the identification and isolation of TRF is clinically important. In this work, we prepared magnetic molecularly imprinted polymers (EMIP) based on metal chelation using norepinephrine and 3-aminophenylboronic acid as functional monomers. The obtained EMIP shows excellent recognition of TRF with the adsorption capacity of 94.2 mg/g and imprinting factor of 3.50. In addition, EMIP was characterized by high specificity, good adsorption performance and stability, and was successfully used for the analysis of TRF in human serum. The present study provides a reliable scheme for targeted epitope imprinting of polymers with metal chelating and dual-functional monomers, showing great potential for biosample analysis.

Exploring the Effect of Psychological Interventions on Anxiety and Depression in Adolescents based on Behavior Change Wheel Theory.

Background: Anxiety is a common mental health problem among adolescents that substantially increases the risk of anxiety disorder. Depression in adulthood and is a high-risk factor leading to suicide. We aimed to explore effective anxiety intervention methods in view of the annual rising detection rate of anxiety in adolescents. Methods: We enrolled 150 volunteers with mild anxiety or above (anxiety scale≥50 points) from 1015 adolescents between March and May 2023 in four communities in Shenyang, Liaoning Province and Nantong, Jiangsu Province in China. The participants were randomly divided into the experimental and control groups, comprising 73 and 74, respectively. The experimental group was given 2-month psychological intervention based on behavior change wheel (BCW) theory, whereas the control group was given no intervention. Results: The average anxiety score of the participants was 46.57 ± 14.19, with 40.4% having anxiety symptoms. Anxiety was statistically correlated with self-evaluation of physical condition, family relationship, and grades (P < 0.05). The depression and anxiety score of the experimental group was significantly lower than that of the control group (P < 0.001). Conclusion: Anxiety has become a common phenomenon among adolescents. Self-evaluation of physical condition, family relationship, and grades are the focus of intervention for individuals with anxiety. The intervention method proposed in this study can effectively reduce the level of anxiety and depression in adolescents, providing a new perspective for formulating anxiety intervention strategies for adolescents.

Investigation of the regulatory effects of water and nitrogen supply on nitrogen transport and distribution in wolfberry fields.

Resource-based water shortages, uncoordinated irrigation, and fertilization are prevalent challenges in agricultural production. The scientific selection of appropriate water and fertilizer management methods is important for improving the utilization efficiency of agricultural resources and alleviating agricultural non-point source pollution. This study focused on wolfberry and compared the effects of four irrigation levels [full irrigation (W0, 75%-85% θf), slight water deficit (W1, 65%-75% θf), moderate water deficit (W2, 55%-65% θf), and severe water deficit (W3, 45%-55% θf)] and four nitrogen application levels [no nitrogen application (N0, 0 kg·ha-1), low nitrogen application (N1, 150 kg·ha-1), medium nitrogen application (N2, 300 kg·ha-1), and high nitrogen application (N3, 450 kg·ha-1)] on soil nitrate nitrogen (NO3 --N) transport, plant nitrogen allocation, and soil nitrous oxide (N2O) emissions during the harvest period of wolfberry. And this study used CRITIC-entropy weights-TOPSIS model to evaluate 16 water and nitrogen regulation models comprehensively. The results revealed the following: (1) The NO3 --N content of the soil decreased with increasing horizontal distance from the wolfberry. It initially decreased, then increased, and finally decreased with an increase in soil depth. The average NO3 --N content in the 0-100 cm soil layer ranged from 3.95-13.29 mg·kg-1, indicating that W0 > W1, W2, W3, and N3 > N2 > N1 > N0. (2) The soil NO3 --N accumulation ranged from 64.45-215.27 kg·ha-1 under varying water and nitrogen levels, demonstrating a decreasing trend with increasing horizontal distance. The NO3 --N accumulation at each horizontal distance increased with increasing irrigation and nitrogen application. The NO3 --N accumulation of W0N3 treatment increased by 5.55%-57.60% compared with the other treatments. (3) The total nitrogen content and nitrogen uptake in all wolfberry organs were W1 > W0 > W2 > W3, and N2 > N3 > N1 > N0. The maximum total nitrogen content and nitrogen uptake in W1N2 treatment were 3.25% and 27.82 kg·ha-1 in the roots, 3.30% and 57.19 kg·ha-1 in the stems, 3.91% and 11.88 kg·ha-1 in the leaves, and 2.42% and 63.56 kg·ha-1 in the fruits, respectively. (4) The emission flux and total emission of N2O increased with increasing irrigation and nitrogen application. The emission flux exhibited a transient peak (116.39-177.91 ug·m-2·h-1) after irrigation. The intensity of N2O emissions initially decreased and then increased with an increase in the irrigation amount. It also initially increased with increasing nitrogen application amount, then decreased, and finally increased again. The maximum emission intensity was observed under the W3N3 treatment (0.23 kg·kg-1). The N2O emission coefficients ranged from 0.17%-0.39%, in the order of W0 > W1 > W2 > W3 (except for N1) and N1 > N2 > N3. (5) Under varying water and nitrogen concentrations, N2O emission flux showed a positive linear correlation with soil pore water content and NO3 --N content and a negative linear correlation with soil temperature. The comprehensive evaluation revealed that a slight water deficit (65%-75% θf) combined with medium nitrogen application (300 kg·ha-1) decreased soil NO3 --N leaching, increased nitrogen uptake, and reduced N2O emission. These findings can serve as a reference for improving the efficiency and reducing emissions of wolfberry in the Yellow River irrigation region of Gansu Province and in similar climate zones.

Effect of 18F-DCFPyL PET on changes in management of patients with prostate cancer: a systematic review and meta-analysis.

Purpose: Prostate-specific membrane antigen (PSMA)-targeted imaging has gained increasing interest in its application in prostate cancer lesion detection. Compared with 68Galium (68Ga), 18Fluoride (18F)-labeled imaging agent has easier syntheses, lower price, and a longer half-time. 2-(3-{1-Carboxy-5-[(6-[18F]fluoro-pyridine-3-carbonyl)-amino]-pentyl}-ureido)-pentanedioic acid positron emission tomography (18F-DCFPyL PET) has been recently approved by the U.S. Food and Drug Administration. Several studies have proven its superiority to conventional imaging techniques in detecting prostate cancer lesions. However, the impact of 18F-DCFPyL PET on the management of patients with prostate cancer is not well established. Thus, we performed a systematic review and meta-analysis of available data to evaluate the impact of 18F-DCFPyL PET on the management of patients with prostate cancer. Methods: The PubMed, Embase, Scopus, and Cochrane databases were searched up to April 2024. Studies that reported the proportion of changes in management after 18F-DCFPyL PET was performed in patients with prostate cancer were included. The Grading of Recommendations Assessment, Development, and Evaluation system was used for the quality evaluation of the included studies. The proportion of changes in management was pooled using a random effects model. Meta-regression analyses were performed to assess the potential correlation between the PET positivity and management changes. Results: Fourteen studies (3,078 patients with prostate cancer) were included in our review and analysis. The pooled percentage of management changes was 43.5% (95% confidence interval [CI]: 33-54%). In patients with biochemical recurrent and for primary staging, the pooled percentage was 50% (95% CI: 39-60%) and 22% (95% CI: 15-29%), respectively. In the meta-regression analyses, PET positivity was detected as a significant predictor of management change (p = 0.0023). Conclusion: 18F-DCFPyL PET significantly affects the management of patients with prostate cancer. Higher PET positivity rate significantly correlated with a higher proportion of management changes in patients with prostate cancer. However, more studies are still needed to confirm the important role of 18F-DCFPyL PET in the management of prostate cancer. Systematic review registration: https://www.crd.york.ac.uk/PROSPERO/#myprospero, CRD42022339178.

Multiple functions of HMGB1 in cancer.

High mobility group box 1 (HMGB1) is a nuclear DNA-binding protein with a dual role in cancer, acting as an oncogene and a tumor suppressor. This protein regulates nucleosomal structure, DNA damage repair, and genomic stability within the cell, while also playing a role in immune cell functions. This review comprehensively evaluates the biological and clinical significance of HMGB1 in cancer, including its involvement in cell death and survival, its potential as a therapeutic target and cancer biomarker, and as a prosurvival signal for the remaining cells after exposure to cytotoxic anticancer treatments. We highlight the need for a better understanding of the cellular markers and mechanisms involved in the involvement of HMGB1in cancer, and aim to provide a deeper understanding of its role in cancer progression.

Anchoring Au nanoclusters into coordination polymers: A novel approach toward ATP detection and its application.

Adenosine triphosphate (ATP) is the main source of energy required for all life activities and is used as a biomarker for diseases such as cancer. It is of great significance to design a novel fluorescent probe with favorable performance for monitoring the changes of ATP concentration. Herein, a fluorescence probe named ZnCPs@AuNCs for ATP sensing was designed and fabricated by integrating AuNCs into ZnCPs. The emission intensity of AuNCs was greatly enhanced upon the formation of the ZnCPs@AuNCs nanocomposites, which may be attributed to ZnCPs restricting the molecular motion of AuNCs. Upon the introduction of ATP, the fluorescence intensity at 564 nm of ZnCPs@AuNCs is quenched. According to this phenomenon, a sensitive and reliable ATP sensing platform was established. Moreover, ZnCPs@AuNCs were incorporated into a poly (vinyl alcohol) matrix for the fabrication of fluorescent film, which exhibited solid-state fluorescence. Inspired by the remarkable fluorescent properties of ZnCPs@AuNCs, the fluorescent hydrogel was prepared by mixing ZnCPs@AuNCs with κ-carrageenan, which demonstrated a response to ATP and favorable self-healing ability. This work presents a perspective of ZnCPs@AuNCs in multiple applications such as biosensing, fluorescent film, and hydrogel construction.

Effects of Water and Nitrogen Control on the Growth Physiology, Yields, and Economic Benefits of Lycium barbarum Plants in a Lycium barbarum + Alfalfa System.

In the production of economic forests, there are common issues such as excessive application of water and fertilizer, redundant plant growth, and low economic benefits. Reasonable water and fertilizer management can not only help address these problems but also improve the absorption and use efficiency of water and fertilizer resources by plants, promoting the green and efficient development of the fruit and forestry industry. In order to explore a suitable water and nitrogen management mode for Lycium barbarum, field experiments were conducted in this study from 2021 to 2022. Specifically, four irrigation modes (according to the proportion ratio of soil moisture content to field moisture capacity θf, 45-55% θf (W1, severe water deficiency), 55-65% θf (W2, moderate water deficiency), 65-75% θf (W3, mild water deficiency), and 75-85% θf (W4, sufficient irrigation)) and four nitrogen application levels (0 kg·ha-1 (N0, no nitrogen application), 150 kg·ha-1 (N1, low nitrogen application level), 300 kg·ha-1 (N2, medium nitrogen application level), and 450 kg·ha-1 (N3, high nitrogen application level)) were set up to analyze the influences of water and nitrogen control on the plant height, stem diameter, chlorophyll content, photosynthetic characteristics and yield, and economic benefits of Lycium barbarum in the Lycium barbarum + Alfalfa system. The study results show that the plant height and stem diameter increment of Lycium barbarum increase with the irrigation amount, increasing first and then decreasing with the increase in the nitrogen application level. Meanwhile, the chlorophyll contents in Lycium barbarum continuously increase throughout their growth periods, with Lycium barbarum treated with W4N2 during all growth periods presenting the highest contents of chlorophyll. In a Lycium barbarum + Alfalfa system, the daily variation curve of the Lycium barbarum net photosynthetic rate presents a unimodal pattern, with maximum values of the daily average net photosynthetic rate and daily carboxylation rate appearing among W4N2-treated plants (19.56 µmol·m-2·s-1 and 157.06 mmol·m-2·s-1). Meanwhile, the transpiration rates of Lycium barbarum plants continuously decrease with the increased degree of water deficiency and decreased nitrogen application level. W1N2-treated plants exhibit the highest leaf daily average water use efficiency (3.31 µmol·s-1), presenting an increase of 0.50-10.47% in efficiency compared with plants under other treatments. The coupling of water and nitrogen has significantly improved the yields and economic benefits of Lycium barbarum plants, with W4N2-treated and W3N2-treated plants presenting the highest dried fruit yield (2623.07 kg·ha-1) and net income (50,700 CNY·ha-1), respectively. Furthermore, compared with other treatment methods, these two treatment methods (W4N2 and W3N2) exhibit increases of 4.04-84.08% and 3.89-123.35% in dried fruit yield and net income indexes, respectively. Regression analysis shows that, in a Lycium barbarum + Alfalfa system, both high yields and economic benefits of Lycium barbarum plants can be achieved using an irrigation amount of 4367.33-4415.07 m3·ha-1 and a nitrogen application level of 339.80-367.35 kg·ha-1. This study can provide a reference for improving the productivity of Lycium barbarum plants and achieving a rational supply of water and nitrogen in Lyciun barbarum + Alfalfa systems in the Yellow River Irrigation Area of Gansu, China, and other similar ecological areas.

Efficacy and safety of 3-month dual antiplatelet therapy in patients after mechanical thrombectomy for acute ischemic stroke: a retrospective study.

Background: Mechanical thrombectomy (MT) is one of the effective treatment methods for acute ischemic stroke (AIS), which requires a period of dual antiplatelet therapy (DAPT) after endovascular treatment. This study aimed to compare the efficacy and safety of 3-month DAPT and 1-month DAPT in AIS patients receiving MT through a retrospective study. Methods: AIS patients who received MT from May 2018 to March 2023 were grouped into a 1-month group (1-M group) and a 3-month group (3-M group) according to the duration of DAPT after MT. The primary outcome was the mRS score at 90 days. Secondary outcomes included a good prognosis (mRS score of 0-2) at 90 days post-surgery, 6-month mortality, recurrence of cerebral infarction, Barthel's index, Montreal Cognitive Assessment (MoCA) score, and incidence of symptomatic intracranial hemorrhage (sICH) during hospitalization. Result: A total of 147 patients with AIS were included in the final analysis, with 78 patients in the 1-M group and 69 patients in the 3-M group. The baseline and neurological characteristics were comparable between both groups. At 3-month follow-up, a total of 61 patients had an mRS of 0-2 at 90 days, with an average mRS of 3.3 ± 0.9 for all patients. There was no statistically significant difference in the mRS between the two groups of patients at 90 days (P > 0.05). There was no statistically significant difference in the mortality rate and incidence of sICH between the two groups of patients during the 6-month follow-up period (P > 0.05), but the recurrence rate of AIS in the 3-M group was lower than that in the 1-M group (P < 0.05). The improvement of Barthel index and MoCA in patients in the 3-M group was higher than those in the 1-M group at 6 months but not statistically different (P > 0.05). Conclusion: For AIS patients undergoing mechanical thrombectomy, compared to 1-month DAPT, 3-month DAPT can reduce the recurrence rate of IS during a 6-month follow-up period, without increasing the mortality and risk of cerebral hemorrhage.

Synthesis of meta-carbonyl phenols and anilines.

Phenols and anilines are of extreme importance for medicinal chemistry and material science. The development of efficient approaches to prepare both compounds has thus long been a vital research topic. The utility of phenols and anilines directly reflects the identity and pattern of substituents on the benzenoid ring. Electrophilic substitutions remain among the most powerful synthetic methods to substituted phenols and anilines, yet in principle achieving ortho- and para-substituted products. Therefore, the selective preparation of meta-substituted phenols and anilines is the most significant challenge. We herein report an efficient copper-catalyzed dehydrogenation strategy to exclusively synthesize meta-carbonyl phenols and anilines from carbonyl substituted cyclohexanes. Mechanistic studies indicate that this transformation undergoes a copper-catalyzed dehydrogenation/allylic hydroxylation or amination/oxidative dehydrogenation/aromatization cascade process.

Zea mays cultivation, biochar, and arbuscular mycorrhizal fungal inoculation influenced lead immobilization.

Plant cultivation can influence the immobilization of heavy metals in soil. However, the roles of soil amendments and microorganisms in crop-based phytoremediation require further exploration. In this study, we evaluated the impact of Zea mays L. cultivation, biochar application, and arbuscular mycorrhizal fungi (AMF) inoculation on soil lead (Pb) immobilization. Our results indicated that biochar addition resulted in a significant, 42.00%, reduction in AMF colonization. Plant cultivation, AMF inoculation, and biochar addition all contributed to enhanced Pb immobilization, as evidenced by decreased levels of diethylenetriaminepentaacetic acid- and CaCl2-extractable Pb in the soil. Furthermore, soil subjected to plant cultivation with AMF and biochar displayed reduced concentrations of bioavailable Pb. Biochar addition altered the distribution of Pb fractions in the soil, transforming the acid-soluble form into the relatively inert reducible and oxidizable forms. Additionally, biochar, AMF, and their combined use promoted maize growth parameters, including height, stem diameter, shoot and root biomass, and phosphorus uptake, while simultaneously reducing the shoot Pb concentration. These findings suggest a synergistic effect in Pb phytostabilization. In summary, despite the adverse impact of biochar on mycorrhizal growth, cultivating maize with the concurrent use of biochar and AMF emerges as a recommended and effective strategy for Pb phytoremediation.IMPORTANCEHeavy metal contamination in soil is a pressing environmental issue, and phytoremediation has emerged as a sustainable approach for mitigating this problem. This study sheds light on the potential of maize cultivation, biochar application, and arbuscular mycorrhizal fungi (AMF) inoculation to enhance the immobilization of Pb in contaminated soil. The findings demonstrate that the combined use of biochar and AMF during maize cultivation can significantly improve Pb immobilization and simultaneously enhance maize growth, offering a promising strategy for sustainable and effective Pb phytoremediation practices. This research contributes valuable insights into the field of phytoremediation and its potential to address heavy metal pollution in agricultural soils.

Facile synthesis of Fe3+ immobilized magnetic polydopamine-polyethyleneimine composites for phosphopeptide enrichment.

As one of the most common post-translational modification of proteins, protein phosphorylation plays a vital role in many physiological processes. The enrichment of phosphopeptides is highly important before the mass spectrometry detection since phosphopeptides are susceptible to interferences from high-abundance non-phosphopeptides. In this study, we designed a novel magnetic composite (Fe3O4@PDA-PEI-Fe3+) for phosphopeptide enrichment with a facile protocol. The developed Fe3O4@PDA-PEI-Fe3+ is a marvelous material with multiple functional groups, and can effectively enrich phosphopeptides through the synergistic effect of three mechanisms, i.e., immobilized metal ion affinity chromatography raised form Fe3+, electrostatic interaction between amine and phosphate groups, and hydrogen bond between the hydrogen atoms of amine groups and oxygen atoms of phosphate groups. Combined with mass spectrometry, the material shows excellent enrichment performance, high sensitivity (0.4 fmol), good selectivity (ß-casein:BSA= 1:500, w:w), and stable reusability (at least 5 cycles). In addition, the material was successfully applied to enrich phosphopeptides from skim milk and human saliva samples, implying that it is an ideal adsorbent for the phosphopeptide enrichment in complex biological samples and provides valuable insights into the field of phosphopeptide analysis.

Enrichment of phosphopeptides by arginine-functionalized magnetic chitosan nanoparticles.

One of the most crucial and prevalent post-translational modifications is the phosphorylation of proteins. The study and examination of protein phosphorylation hold immense importance in comprehending disease mechanisms and discovering novel biomarkers. However, the inherent low abundance, low ionization efficiency, and coexistence with non phosphopeptides seriously affect the direct analysis of phosphopeptides by mass spectrometry. In order to tackle these problems, it is necessary to carry out selective enrichment of phosphopeptides prior to conducting mass spectrometry analysis. Herein, magnetic chitosan nanoparticles were developed by incorporating arginine, and were then utilized for phosphopeptide enrichment. A tryptic digest of ß-casein was chosen as the standard substance. After enrichment, combined with matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF MS), the detection limit of the method was 0.4 fmol. The synthesized magnetic material demonstrated great potential in the detection of phosphopeptides in complex samples, as proven by its successful application in detecting phosphopeptides in skim milk and human saliva samples.

Anchoring copper nanoclusters to Al2O3 microsphere for dual-mode analysis of N-acetyl-ß-D-glucosaminidase and information encryption.

Herein, we attempted to confine copper nanoclusters (CuNCs) with alumina (Al2O3) as the matrix (Al2O3@CuNCs), which effectively circumvented the drawbacks of CuNCs (such as weak photoluminescence and low quantum yield). Al2O3@CuNCs demonstrated sensitive response to p-nitrophenol, the catalytic product of N-acetyl-ß-D-glucosaminidase (NAG) on account of the inner filter effect and dynamic quenching effect. In light of this, a novel assay was created to identify NAG, a critical indicator of diabetic nephropathy. Additionally, a portable and instrument-free sensing platform mainly consisting of a smartphone, a cuvette, a cuvette holder, a dark box and a 365 nm UV lamp was developed for the quantitative detection of NAG. The as-prepared material was also utilized in anti-counterfeiting and information encryption based on their excellent optical properties and sensitive response to the catalyzed product of NAG. This work advanced potential applications of CuNCs composites in the areas of portable, multi-mode biosensing, anti-counterfeiting and information encryption.

Fluorometric and colorimetric dual-mode sensing of α-glucosidase based on aggregation-induced emission enhancement of AuNCs.

Herein, a fluorometric and colorimetric dual-mode assay platform used for α-glucosidase (α-Glu) activity sensing based on aggregation-induced emission enhancement (AIEE) of AuNCs was developed for the first time. The quantum yield (QY) and fluorescence lifetime of AuNCs were successfully ameliorated by Ce3+-triggered AIEE (Ce@AuNCs). Subsequently, on the basis of the inner filter effect (IFE) and dynamic quenching effect (DQE) between 2,6-dichlorophenolindophenol (DCIP) and Ce@AuNCs as well as the reduction of DCIP by ascorbic acid (AA) generated from α-Glu-catalyzed hydrolysis of L-ascorbic acid-2-O-α-D-glucopyranosyl (AA2G), the marriage of fluorometric and colorimetric modes applied for α-Glu activity monitoring was achieved. Besides, the feasibility of this dual-mode sensing system was confirmed by the assays versus potential interfering substances and in real samples. In particular, this system was further applied to evaluate natural α-Glu inhibitors (AGIs) including luteolin, apigenin, and hesperidin. Overall, the multi-mode optical sensor newly designed here has the potential for the accurate discovery of natural anti-diabetes drugs and the therapy of diabetes.

Preparation of poly(caffeic acid)-coated epitope molecularly imprinted polymers and investigation of adsorption performance toward ovalbumin.

Food allergy can lead to severe allergic reactions that are potentially fatal for human, hence the detection of food allergens such as ovalbumin (OVA) is important. In this study, a poly(caffeic acid)-coated epitope molecularly imprinted polymer (EMIP) was prepared by chelation and autoxidation of caffeic acid with hexamethylenediamine. EMIP has not only imprinted cavities highly matched with OVA in size and spatial structure, but also externally abundant hydrophilic groups, resulting in few non-specific binding and good hydrophilicity. With high specificity, significant paramagnetism, and great reusability, EMIP can distinguish OVA from other proteins and selectively enrich OVA in egg white samples, which opens up a promising route to the determination of allergens in food products.

Comparative evaluation of enriched formula milk powder with OPO and MFGM vs. breastfeeding and regular formula milk powder in full-term infants: a comprehensive study on gut microbiota, neurodevelopment, and growth.

This study investigated the non-inferiority of feeding term healthy infants with enriched formula milk powder containing 1,3-dioleoyl-2-palmitoylglycerol (OPO) and milk fat globular membrane (MFGM), compared to breast milk, in terms of the formation of gut microbiota, neurodevelopment and growth. Infants were divided into three groups: breast milk group (BMG, N = 50), fortified formula group (FFG, N = 17), and regular formula group (RFG, N = 12), based on the feeding pattern. Growth and development information was collected from the infants at one month, four months, and six months after the intervention. Fecal samples were collected from infants and analyzed for gut microbiota using 16S ribosomal DNA identification. The study found that at the three time points, the predominant bacterial phyla in FFG and BMG were Proteobacteria, Firmicutes, and Bacteroidetes, which differed from RFG. The abundance of Bifidobacterium in the RFG was lower than the FFG (one month, p = 0.019) and BMG (four months, p = 0.007). The abundance of Methanoprebacteria and so on (genus level) are positively correlated with bone mineral density (BMD) of term infants, and have the potential to be biomarkers for predicting BMD. The abundance of beta-galactosidase, a protein that regulates lactose metabolism and sphingoid metabolism, was higher in FFG (six months, p = 0.0033) and BMG (one month, p = 0.0089; four months, p = 0.0005; six months, p = 0.0005) than in the RFG group, which may be related to the superior bone mineral density and neurodevelopment of infants in the FFG and BMG groups than in the RFG group. Our findings suggest that formula milk powder supplemented with OPO and MFGM is a viable alternative to breastfeeding, providing a practical alternative for infants who cannot be breastfed for various reasons.

Compound erosion effect of snowmelt, wind, and rainfall on sloping farmlands of Chinese typical Mollisol region.

Research on the processes and mechanisms of compound soil erosion by multiple forces can provide scientific guidance for precisely controlling cropland soil erosion. Based on the seasonal alternation of freezing-thawing, snowmelt, wind, and rainfall erosion forces on sloping farmlands under natural conditions from November to next October of each year, we used a set of indoor simulation experiments of multi-force superimpositions to analyze the compound soil erosion processes of snowmelt (1 and 2 L·min-1), wind (12 m·s-1), and rainfall (100 mm·h-1). We further discussed the erosion effects of multi-force superimpositions. The results showed that, under single snowmelt erosion, an increase in snowmelt flow had a greater effect on sloping snowmelt erosion intensity than that of sloping runoff rate. When sloping snowmelt flow increased from 1 L·min-1 to 2 L·min-1, sloping runoff rate and erosion intensity increased by 2.7 and 4.0 times, respectively. Under snowmelt-wind superimposition erosion, previous sloping snowmelt erosion inhibited late wind erosion occurrence. As sloping snowmelt flow increased from 1 L·min-1 to 2 L·min-1, the inhibiting action subsequently increased and wind erosion intensity caused by previous snowmelt reduced by more than 50%. Both wind erosion and snowmelt-wind superimposed erosion intensified late rainfall erosion. The early wind erosion increased rainfall erosion by 24.5%. The snowmelt-wind superimposed effect increased the later slope rainfall erosion by 132.8% and 465.4% under 1 and 2 L·min-1 snowmelt runoff rates, respectively. The compound soil erosion amount driven by multiple force superimposition was not the sum of the corresponding erosion amount caused by single erosion force, with promoting or inhibiting effects of erosion force superimposition. The erosion effect of snowmelt-wind superposition was negative, but that of wind-rainfall superposition and snowmelt-wind-rainfall superpositions were positive.

[Research advances of porous organic framework materials on enrichment and detection of mycotoxins].

Mycotoxins are a class of toxic secondary metabolites produced by fungi. These substances are carcinogenic, teratogenic, and mutagenic, and cause serious harm to the human body; thus, they have attracted wide attention worldwide. Establishing accurate, rapid, and sensitive methods for the detection of mycotoxins is of great significance. Chromatography is a commonly used technology for mycotoxin detection. However, it is challenging to use in the direct analysis of these metabolites because of the wide variety and distribution of mycotoxins, their complex sample matrix, and their very low content in actual samples. Therefore, the development of suitable sample pretreatment methods for the efficient separation and enrichment of mycotoxins is necessary. In recent years, porous organic framework materials, which are represented by metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs), have been widely applied in the sample pretreatment of mycotoxins owing to their many advantages, which include a large specific surface area, high porosity, adjustable pore size, diverse frame structures, uniform active site distribution, and modifiable structures. In addition, MOF/COF materials feature excellent fluorescence and electrochemical properties, rendering them highly suitable for mycotoxin analysis and sensing. In this article, the recent applications of MOF/COF materials in conventional sample pretreatment methods (e. g., solid-phase extraction, dispersive solid-phase extraction, magnetic solid-phase extraction, and immunomagnetic bead separation) for mycotoxin separation and enrichment are reviewed. Research on the use of MOF/COF materials for the fluorescence and electrochemical sensing of mycotoxins is also summarized. Finally, the existing challenges and future development trends of these materials are discussed and prospected to provide a reference for future research on the applications of MOF/COF materials in mycotoxin detection and analysis.