Orbital Magneto-Nonlinear Anomalous Hall Effect in Kagome Magnet Fe_{3}Sn_{2}.

It has been theoretically predicted that perturbation of the Berry curvature by electromagnetic fields gives rise to intrinsic nonlinear anomalous Hall effects that are independent of scattering. Two types of nonlinear anomalous Hall effects are expected. The electric nonlinear Hall effect has recently begun to receive attention, while very few studies are concerned with the magneto-nonlinear Hall effect. Here, we combine experiment and first-principles calculations to show that the kagome ferromagnet Fe_{3}Sn_{2} displays such a magneto-nonlinear Hall effect. By systematic field angular and temperature-dependent transport measurements, we unambiguously identify a large anomalous Hall current that is linear in both applied in-plane electric and magnetic fields, utilizing a unique in-plane configuration. We clarify its dominant orbital origin and connect it to the magneto-nonlinear Hall effect. The effect is governed by the intrinsic quantum geometric properties of Bloch electrons. Our results demonstrate the significance of the quantum geometry of electron wave functions from the orbital degree of freedom and open up a new direction in Hall transport effects.

Investigation on submicron particle separation and deflection using tilted-angle standing surface acoustic wave microfluidics.

With the development of in vitro diagnostics, extracting submicron scale particles from mixed body fluids samples is crucial. In recent years, microfluidic separation has attracted much attention due to its high efficiency, label-free, and inexpensive nature. Among the microfluidic-based separation, the separation based on ultrasonic standing waves has gradually become a powerful tool. A microfluid environment containing a tilted-angle ultrasonic standing surface acoustic wave (taSSAW) field has been widely adapted and designed to separate submicron particles for biochemical applications. This paper investigated submicron particle defection in microfluidics using taSSAWs analytically. Particles with 0.1-1 µm diameters were analyzed under acoustic pressure, flow rate, tilted angle, and SSAW frequency. According to different acoustic radiation forces acting on the particles, the motion of large-diameter particles was more likely to deflect to the direction of the nodal lines. Decreasing the input flow rate or increasing acoustic pressure and acoustic wave frequency can improve particle deflection. The tilted angle can be optimized by analyzing the simulation results. Based on the simulation analysis, we experimentally showed the separation of polystyrene microspheres (100 nm) from the mixed particles and exosomes (30-150 nm) from human plasma. This research results can provide a certain reference for the practical design of bioparticle separation utilizing acoustofluidic devices.

Analysis and numerical investigation of bile flow dynamics within the strictured biliary duct.

The mechanics of bile flow in the biliary system plays an important role in studying bile stasis and gallstone formation. Bile duct stricture is an abnormal phenomenon that refers to the bile duct getting smaller or narrower. The main objective of this study is to study the influence of stricture on bile flow dynamics using numerical methods. We employed a numerical Computational Fluid Dynamics model of the bile flow within a strictured hepatic duct. We studied and compared the influence of stricture severity, stricture length, eccentricity, and bile flow property on the bile flow dynamics. The bile flow velocity, pressure distribution, pressure drop, and wall shear stress are provided in detail. The stricture alters the normal bile flow pattern and increases flow resistance. At the location upstream and downstream of the stricture, bile flow slows down. In the area of the stricture throat, bile flow is accelerated, and recirculation forms behind the stricture. The maximum pressure drop of the biliary system increases with the stricture length. The eccentricity makes the flow deflect away from the duct's centerline. The behavior of the deflected flow is significantly altered downstream of the stricture. Such bile flow behavior as deceleration and recirculation may lead to cholestasis. Stricture alters bile flow in the biliary tract, causing changes in biliary hydrodynamic indexes, which could potentially serve as an omen for gallstone formation and other related diseases. The consideration of the bile duct stricture could lead to better patient stratification.

Finite Element Study for Mass Sensitivity of Love Surface Acoustic Wave Sensor with Si3N4-SiO2 Double-Covered Waveguiding Layer.

Love surface acoustic wave (L-SAW) sensors are miniaturized, easy to integrate, and suitable for detection in liquid environments. In this paper, an L-SAW sensor with a thin Si3N4-SiO2 double-covered layer was proposed for samples with small mass loads. The output response, phase velocity of the acoustic wave, and the mass sensitivity were analyzed using the finite element method (FEM). The simulation results show that the Si3N4 layer with high wave velocity greatly weakens the limitation of SiO2 on the phase velocity. The phase velocity can reach about 4300 m/s, which can increase the frequency shift when the same mass load is applied. Within a certain range, the mass sensitivity of the sensor is enhanced with the increase in the total thickness of the waveguiding layer and the thickness ratio of Si3N4 in the double-covered layer. When the thickness ratio is 1:2, the peak value of the mass sensitivity of the sensor is approximately 50% higher than that achieved with only the SiO2 waveguiding layer. The surface average stress of the delay line region follows the same trend as the mass sensitivity. The increase in mass sensitivity is the result of the heightened stress on the sensor surface. This L-SAW sensor, featuring a double-covered waveguiding layer, demonstrates high sensitivity and a simple structure. The simulation results lay a foundation for the design and manufacture of SAW sensors.

Electrodeposition model with dynamic ion diffusion coefficients for predicting void defects in electroformed microcolumn arrays.

Due to the confined mass transfer capability in microchannels, void defects are easily formed in electroformed microcolumn arrays with a high depth/width ratio, which seriously affects the life and performance of micro-devices. The width of the microchannel constantly decreases during electrodeposition, which further deteriorates the mass transfer capability inside the microchannel at the cathode. In the traditional micro-electroforming simulation model, the change of the ion diffusion coefficient is always ignored, making it difficult to accurately predict the size of void defects prior to electroforming experiments. In this study, nickel ion diffusion coefficients in microchannels are tested based on the electrochemical experiments. The measured diffusion coefficients decrease from 4.74 × 10-9 to 1.27 × 10-9 m2 s-1, corresponding to microchannels with a width from 120 to 24 µm. The simulation models of both constant and dynamic diffusion coefficients are established, and the corresponding simulation results are compared with the void defects obtained using micro-electroforming experiments. The results show that when the cathode current densities are 1, 2 and 4 A dm-2, the size of void defects obtained with the dynamic diffusion coefficient model is closer to the experimental results. In the dynamic diffusion coefficient model, the local current density and ion concentration distribution proves to be more inhomogeneous, leading to a big difference in the deposition rate of nickel between the bottom and the opening of a microchannel, and consequently a larger void defect in the electroformed microcolumn arrays. In brief, the ion diffusion coefficient inside microchannels with a different width is tested experimentally, which provides a reference for developing reliable micro-electroforming simulation models.

Effect of Interfacial Interaction on the Demolding Deformation of Injection Molded Microfluidic Chips.

During the demolding process, the interfacial interaction between the polymer and the metal mold insert will lead to the deformation of the micro-structure, which will directly affect the molding quality and performance of injection molded microfluidic chips. In this study, the demolding quality of micro-channels and micro-mixing structures of polycarbonate (PC), polymethyl methacrylate (PMMA), cyclic olefin copolymer (COC), and polystyrene (PS) microfluidic chips for heavy metal detection were investigated by molding experiments. The experimental results showed that the structures of microfluidic chips could be completely replicated. However, tensile deformation and fracture defects were observed at the edges of the micro-structures after demolding. Compared to the Ni mold insert, the calculation of the relative deviation percentages showed that the width of the micro-channel became larger and the depth became smaller, while the dimensions of the micro-mixing structure changes in the opposite direction. Subsequently, a molecular dynamics (MD) simulation model of polymer/nickel (Ni) mold insert for injection molding was established. The changes of adhesion work, demolding resistance and potential energy during demolding were analyzed. The simulation results showed that the polymer structures had some deformations such as necking, molecular chain stretching and voids under the action of adhesion work and demolding resistance. The difference in the contact area with the mold insert directly brought different interfacial interactions. In addition, the potential energy change of the polymer system could be used to quantitatively characterize the demolding deformation of the structure. Overall, the MD method is able to effectively explain the internal mechanisms of interfacial interactions, leading to the demolding deformation of polymer structures from the molecular/atomic scale.

A cathelicidin antimicrobial peptide from Hydrophis cyanocinctus inhibits Zika virus infection by downregulating expression of a viral entry factor.

Zika virus (ZIKV) is a re-emerging flavivirus that causes conditions such as microcephaly and testis damage. The spread of ZIKV has become a major public health concern. Recent studies indicated that antimicrobial peptides are an ideal source for screening antiviral candidates with broad-spectrum antiviral activities, including against ZIKV. We herein found that Hc-CATH, a cathelicidin antimicrobial peptide identified from the sea snake Hydrophis cyanocinctus in our previous work, conferred protection against ZIKV infection in host cells and showed preventative efficacy and therapeutic efficacy in C57BL/6J mice, Ifnar1-/- mice, and pregnant mice. Intriguingly, we revealed that Hc-CATH decreased the susceptibility of host cells to ZIKV by downregulating expression of AXL, a TAM (TYRO3, AXL and MERTK) family kinase receptor that mediates ZIKV infection, and subsequently reversed the negative regulation of AXL on host's type I interferon response. Furthermore, we showed that the cyclo-oxygenase-2/prostaglandin E2/adenylyl cyclase/protein kinase A pathway was involved in Hc-CATH-mediated AXL downregulation, and Hc-CATH in addition directly inactivated ZIKV particles by disrupting viral membrane. Finally, while we found Hc-CATH did not act on the late stage of ZIKV infection, structure-function relationship studies revealed that α-helix and phenylalanine residues are key structural requirements for its protective efficacy against initial ZIKV infection. In summary, we demonstrate that Hc-CATH provides prophylactic and therapeutic efficacy against ZIKV infection via downregulation of AXL, as well as inactivating the virion. Our findings reveal a novel mechanism of cathelicidin against viral infection and highlight the potential of Hc-CATH to prevent and treat ZIKV infection.

Heterodimensional superlattice with in-plane anomalous Hall effect.

Superlattices-a periodic stacking of two-dimensional layers of two or more materials-provide a versatile scheme for engineering materials with tailored properties1,2. Here we report an intrinsic heterodimensional superlattice consisting of alternating layers of two-dimensional vanadium disulfide (VS2) and a one-dimensional vanadium sulfide (VS) chain array, deposited directly by chemical vapour deposition. This unique superlattice features an unconventional 1T stacking with a monoclinic unit cell of VS2/VS layers identified by scanning transmission electron microscopy. An unexpected Hall effect, persisting up to 380 kelvin, is observed when the magnetic field is in-plane, a condition under which the Hall effect usually vanishes. The observation of this effect is supported by theoretical calculations, and can be attributed to an unconventional anomalous Hall effect owing to an out-of-plane Berry curvature induced by an in-plane magnetic field, which is related to the one-dimensional VS chain. Our work expands the conventional understanding of superlattices and will stimulate the synthesis of more extraordinary superstructures.

Antisymmetric Seebeck Effect in a Tilted Weyl Semimetal.

Tilting the Weyl cone breaks the Lorentz invariance and enriches the Weyl physics. Here, we report the observation of a magnetic-field-antisymmetric Seebeck effect in a tilted Weyl semimetal, Co_{3}Sn_{2}S_{2}. Moreover, it is found that the Seebeck effect and the Nernst effect are antisymmetric in both the in-plane magnetic field and the magnetization. We attribute these exotic effects to the one-dimensional chiral anomaly and phase space correction due to the Berry curvature. The observation is further reproduced by a theoretical calculation, taking into account the orbital magnetization.

Molecular Insights into the Wall Slip Behavior of Pseudoplastic Polymer Melt in Nanochannels during Micro Injection Molding.

Wall slip directly affects the molding quality of plastic parts by influencing the stability of the filling flow field during micro injection molding. The accurate modeling of wall slip in nanochannels has been a great challenge for pseudoplastic polymer melts. Here, an effective modeling method for polymer melt flow in nanochannels based on united-atom molecular dynamics simulations is presented. The effects of driving forces and wall-fluid interactions on the behavior of polyethylene melt under Poiseuille flow conditions were investigated by characterizing the slip velocity, dynamics information of the flow process, and spatial configuration parameters of molecular chains. The results indicated that the united-atom molecular dynamics model could better describe the pseudoplastic behavior in nanochannels than the commonly used finitely extensible nonlinear elastic (FENE) model. It was found that the slip velocity could be increased with increasing driving force and show completely opposite variation trends under different orders of magnitude of the wall-fluid interactions. The influence mechanism was interpreted by the density distribution and molecular chain structure parameters, including disentanglement and orientation, which also coincides with the change in the radius of gyration.

Tri-Channel Electrochemical Immunobiosensor for Combined Detections of Multiple Exosome Biomarkers of Lung Cancer.

Current methods for the early diagnosis of cancer can be invasive and costly. In recent years, exosomes have been recognized as potential biomarkers for cancer diagnostics. The common methods for quantitative detection of exosomes, such as nanoparticle tracking analysis (NTA) and flow cytometry, rely on large-scale instruments and complex operation, with results not specific for cancer. Herein, we present a tri-channel electrochemical immunobiosensor for enzyme-free and label-free detecting carcino-embryonic antigen (CEA), neuron-specific enolase (NSE), and cytokeratin 19 fragments (Cyfra21-1) from exosomes for specific early diagnosis of lung cancer. The electrochemical immunobiosensor showed good selectivity and stability. Under optimum experimental conditions, the linear ranges were from 10-3 to 10 ng/mL for CEA, 10-4 to 102 ng/mL for NSE, and 10-3 to 102 ng/mL for Cyfra21-1, and a detection limit down to 10-4 ng/mL was achieved. Furthermore, we performed exosome analysis in three kinds of lung cancer. The results showed a distinct expression level of exosomal markers in different types. These works provide insight into a promising alternative for the quantification of exosomal markers in specific diseases in the following clinical bioassays.

Investigation of Solvent-Assisted In-Mold Bonding of Cyclic Olefin Copolymer (COC) Microfluidic Chips.

The bonding of microfluidic chips is an essential process to enclose microchannels or microchambers in a lab-on-a-chip. In order to improve the bonding quality while reducing the fabrication time, a solvent-assisted bonding strategy was proposed to seal the microchannels immediately after the cover sheet and substrate chip was injection molded in a single mold. Proper organic solvents were selected and the influences of solvent ratios on the surface roughness, microchannel morphology, and contact angle of microfluidic chips were investigated. When the solvent bonding was integrated in the mold, the influences of solvent volume fraction, solvent dosage, bonding pressure, and bonding time on the bonding quality were analyzed. Results show that the solvent cyclohexane needs to be mixed with isopropanol to reduce the dissolution effect. Solvent treatment is suggested to be performed on the cover sheet with a cyclohexane volume fraction of 70% and a dose of 1.5 mL, a bonding pressure of 2 MPa, and a bonding time of 240 s. The bonding strength reaches 913 kPa with the optimized parameters, while the microchannel deformation was controlled below 8%.

Molecular Dynamics Simulation on the Effect of Self-Resistance Electric Heating on Carbon Fiber Surface Chemical Properties and Fiber/PP Interfacial Behavior.

Carbon fiber-reinforced thermoplastic (CFRT) composites have been dramatically employed in the automotive field on account of their superior performances, such as being light weight and high-strength. Self-resistance electric (SRE) heating provides a solution to the problem of high energy consumption in the conventional process of CFRT composites. The effect of SRE heating on the surface chemical properties of carbon fiber (CF) was investigated by X-ray photoelectron spectroscopy (XPS). XPS analysis suggests that the C-O-C epoxy group, the CF surface, would be degraded after SRE heating with strong current intensity, while there are weak changes in the content of -C-OH, -C-O-C-, -C-NH2 and -COOH groups with current intensity. The interfacial bonding properties and the radial distribution function (RDF) of CF-PP interfaces were carried out by molecular dynamics (MD) simulation. The simulation results show that the adhesion between the PP and the E44 sizing agent is weaker than that between CF and PP. There are no interaction modes between the PP and E44 sizing agent except van der Waals and electrostatic adsorption. The presence of the E44 sizing agent does not change the bonding mechanism at the interface of CF/PP.

Numerical Simulation on the Acoustic Streaming Driven Mixing in Ultrasonic Plasticizing of Thermoplastic Polymers.

The acoustic melt stream velocity field, total force, and trajectory of fluorescent particles in the plasticizing chamber were analyzed using finite element simulation to investigate the acoustic streaming and mixing characteristics in ultrasonic plasticization micro-injection molding (UPMIM). The fluorescence intensity of ultrasonic plasticized samples containing thermoplastic polymer powders and fluorescent particles was used to determine the correlation between UPMIM process parameters and melt mixing characteristics. The results confirm that the acoustic streaming driven mixing occurs in ultrasonic plasticization and could provide similar shear stirring performance as the screw in traditional extrusion/injection molding. It was found that ultrasonic vibrations can cause several melt vortices to develop in the plasticizing chamber, with the melt rotating around the center of the vortex. With increasing ultrasonic amplitude, the melt stream velocity was shown to increase while retaining the trace, which could be altered by modulating other parameters. The fluorescent particles are subjected to a two-order-of-magnitude stronger Stokes drag force than the acoustic radiation force. The average fluorescence intensity was found to be adversely related to the distance from the sonotrodes' end surface, and fluorescence particles were more equally distributed at higher parameter levels.

Tuning Power Ultrasound for Enhanced Performance of Thermoplastic Micro-Injection Molding: Principles, Methods, and Performances.

With the wide application of Micro-Electro-Mechanical Systems (MEMSs), especially the rapid development of wearable flexible electronics technology, the efficient production of micro-parts with thermoplastic polymers will be the core technology of the harvesting market. However, it is significantly restrained by the limitations of the traditional micro-injection-molding (MIM) process, such as replication fidelity, material utilization, and energy consumption. Currently, the increasing investigation has been focused on the ultrasonic-assisted micro-injection molding (UAMIM) and ultrasonic plasticization micro-injection molding (UPMIM), which has the advantages of new plasticization principle, high replication fidelity, and cost-effectiveness. The aim of this review is to present the latest research activities on the action mechanism of power ultrasound in various polymer micro-molding processes. At the beginning of this review, the physical changes, chemical changes, and morphological evolution mechanism of various thermoplastic polymers under different application modes of ultrasonic energy field are introduced. Subsequently, the process principles, characteristics, and latest developments of UAMIM and UPMIM are scientifically summarized. Particularly, some representative performance advantages of different polymers based on ultrasonic plasticization are further exemplified with a deeper understanding of polymer-MIM relationships. Finally, the challenges and opportunities of power ultrasound in MIM are prospected, such as the mechanism understanding and commercial application.

Rapid Enrichment of Submicron Particles within a Spinning Droplet Driven by a Unidirectional Acoustic Transducer.

Efficient and rapid particle enrichment at the submicron scale is essential for research in biomedicine and biochemistry. Here, we demonstrate an acoustofluidic method for submicron particle enrichment within a spinning droplet driven by a unidirectional transducer. The unidirectional transducer generates intense sound energy with relatively low attenuation. Droplets placed offset in the wave propagation path on a polydimethylsiloxane film undergo strong pressure gradients, deforming into an ellipsoid shape and spinning at high speed. Benefitting from the drag force induced by the droplet spin and acoustic streaming and the radial force induced by the droplet compression and expansion, the submicron particles in the liquid droplet quickly enrich toward the central area following a spiral trajectory. Through numerical calculations and experimental processes, we have demonstrated the possible mechanism responsible for particle enrichment. The application of biological sample processing has also been exploited. This study anticipates that the strategy based on the spinning droplet and particle enrichment method will be highly desirable for many applications.

Experimental Investigation and Molecular Dynamics Simulation on the Anti-Adhesion Behavior of Alkanethiols on Nickel Insert in Micro Injection Molding.

Due to the adhesion between the polymer melt and nickel (Ni) mold insert in the micro injection molding process, deformation defects frequently occur when the microstructures are demolded from the insert. In this study, self-assembled alkanethiols were applied to modify the surface of Ni mold insert to reduce its surface energy. Experimental trials were undertaken to explore the effect of alkanethiols coating on the replication quality. After that, molecular dynamics (MD) simulation was then used to investigate the adhesion behavior between the self-assembled coating and polypropylene (PP) by establishing three different types of alkanethiol material. The interaction energy, the potential energy change and radial distribution function were calculated to study the anti-adhesion mechanism. Experimental results show that all the three coatings can effectively decrease the adhesion and therefore promote the replication fidelity. It is demonstrated in MD simulation that the adhesion mainly comes from the van der Waals (vdW) force at the interface. The arrangement of sulfur atom on the Ni surface results in different absorbing behaviors. Compared with that of the PP-Ni interface, the interfacial energy and adhesion work after surface treatment is significantly reduced.

Chirality-Dependent Hall Effect and Antisymmetric Magnetoresistance in a Magnetic Weyl Semimetal.

Weyl semimetals host a variety of exotic effects that have no counterpart in conventional materials, such as the chiral anomaly and magnetic monopole in momentum space. These effects give rise to unusual transport properties, including a negative magnetoresistance and a planar Hall effect, etc. Here, we report a new type of Hall and magnetoresistance effect in a magnetic Weyl semimetal. Unlike antisymmetric (with respect to either magnetic field or magnetization) Hall and symmetric magnetoresistance in conventional materials, the discovered magnetoresistance and Hall effect are antisymmetric in both magnetic field and magnetization. We show that the Berry curvature, the tilt of the Weyl node, and the chiral anomaly synergically produce these phenomena. Our results reveal a unique property of Weyl semimetals with broken time reversal symmetry.

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime.

A fast mixing is critical for subsequent practical development of microfluidic devices, which are often used for assays in the detection of reagents and samples. The present work sets up computational fluid dynamics simulations to explore the flow characteristic and mixing mechanism of fluids in cross-shaped mixers within the laminar regime. First, the effects of increasing an operating parameter on local mixing quality along the microchannels are investigated. It is found that sufficient diffusion cannot occur even though the concentration gradient is large at a high Reynolds number. Meanwhile, a method for calculating local mixing efficiency is also characterized. The mixing efficiency varies exponentially with the flow distance. Second, in order to optimize the cross-shaped mixer, the effects of design parameters, namely aspect ratio, mixing angle and blockage, on mixing quality are captured and the visualization of velocity and concentration distribution are demonstrated. The results show that the aspect ratio and the blockage play an important role in accelerating the mixing process. They can improve the mixing efficiency by increasing the mass transfer area and enhancing the chaotic advection, respectively. In contrast, the inflow angle that affects dispersion length is not an effective parameter. Besides, the surface roughness, which makes the disturbance of fluid flow by roughness more obvious, is considered. Three types of rough elements bring benefits for enhancing mixing quality due to the convection induced by the lateral velocity.