Advancement of membrane separation technology for organic pollutant removal.

In the face of growing global freshwater scarcity, the imperative to recycle and reuse water becomes increasingly apparent across industrial, agricultural, and domestic sectors. Eliminating a range of organic pollutants in wastewater, from pesticides to industrial byproducts, presents a formidable challenge. Among the potential solutions, membrane technologies emerge as promising contenders for treating diverse organic contaminants from industrial, agricultural, and household origins. This paper explores cutting-edge membrane-based approaches, including reverse osmosis, nanofiltration, ultrafiltration, microfiltration, gas separation membranes, and pervaporation. Each technology's efficacy in removing distinct organic pollutants while producing purified water is scrutinized. This review delves into membrane fouling, discussing its influencing factors and preventative strategies. It sheds light on the merits, limitations, and prospects of these various membrane techniques, contributing to the advancement of wastewater treatment. It advocates for future research in membrane technology with a focus on fouling control and the development of energy-efficient devices. Interdisciplinary collaboration among researchers, engineers, policymakers, and industry players is vital for shaping water purification innovation. Ongoing research and collaboration position us to fulfill the promise of accessible, clean water for all.

Methane mitigation via the nitrite-DAMO process induced by nitrate dosing in sewers.

Nitrate or nitrite-dependent anaerobic methane oxidation (n-DAMO) is a microbial process that links carbon and nitrogen cycles as a methane sink in many natural environments. This study demonstrates, for the first time, that the nitrite-dependent anaerobic methane oxidation (nitrite-DAMO) process can be stimulated in sewer systems under continuous nitrate dosing for sulfide control. In a laboratory sewer system, continuous nitrate dosing not only achieved complete sulfide removal, but also significantly decreased dissolved methane concentration by ∼50 %. Independent batch tests confirmed the coupling of methane oxidation with nitrate and nitrite reduction, revealing similar methane oxidation rates of 3.68 ± 0.5 mg CH4 L-1 h-1 (with nitrate as electron acceptor) and 3.57 ± 0.4 mg CH4 L-1 h-1 (with nitrite as electron acceptor). Comprehensive microbial analysis unveiled the presence of a subgroup of the NC10 phylum, namely Candidatus Methylomirabilis (n-DAMO bacteria that couples nitrite reduction with methane oxidation), growing in sewer biofilms and surface sediments with relative abundances of 1.9 % and 1.6 %, respectively. In contrast, n-DAMO archaea that couple methane oxidation solely to nitrate reduction were not detected. Together these results indicated the successful enrichment of n-DAMO bacteria in sewerage systems, contributing to approx. 64 % of nitrite reduction and around 50 % of dissolved methane removal through the nitrite-DAMO process, as estimated by mass balance analysis. The occurrence of the nitrite-DAMO process in sewer systems opens a new path to sewer methane emissions.

Membrane distillation of wastewater: comparison of model and real organics.

Fouling behaviour in membrane distillation (MD) processes plays a crucial role in determining their widespread acceptability. Most studies have primarily focused on model organic foulants, such as humic acid (HA) and sodium alginate (SA). This study investigates the fouling of a polytetrafluoroethylene membrane in a direct contact MD (DCMD) using model organics (i.e., HA and SA) and real wastewater. The results indicated that the flux decline (5-60%) was only observed during the initial phase of the operation with model organic foulants. In contrast, real wastewater caused a gradual decline in flux throughout the experiment in both the concentrate (40%) and continuous (90%) modes. The study also found significant differences in the fouling layer morphology, composition, and hydrophobicity between the model organic foulants and real wastewater. Fourier transform infrared spectroscopy findings demonstrated that the fouling layer formed by real wastewater varied significantly from model organics, which primarily comprised of protein-like and polysaccharide-like functional groups. Finally, liquid chromatography-organic carbon detection revealed that the fouling layer of the MD membrane with real wastewater was composed of 40.7% hydrophobic and 59.3% hydrophilic organics. This study suggests that model organics may not accurately reflect real wastewater fouling.

Improvement of surface stability of Zn anode by a cost-effective ErCl3 additive for realizing high-performance aqueous zinc-ion batteries.

Rechargeable aqueous-zinc ion batteries (AZIB) have notable benefits in terms of high safety and low cost. Nevertheless, the challenges, such as dendrite growth, zinc anode corrosion, and hydrogen evolution reaction, impede its practical implementation. Hence, this study proposes the introduction of an economical ErCl3 electrolyte additive to stabilize the Zn anode surface and address the aforementioned issues. The introduced Er3+ will cover the raised zinc dendrite surface and weaken the "tip effect" on the surface of the zinc anode via the "electrostatic shielding" effect. Simultaneously, the introduced Cl- can reduce the polarization of the zinc anode. Due to the synergistic effect of Er3+ and Cl-, the zinc anode corrosion, dendrite growth and hydrogen evolution have been efficiently inhibited. As a result, the Zn||Zn-symmetric battery using ErCl3 additive can stably cycle for 1100 h at 1 mA cm-2, 1 mAh cm-2, and exhibit a high average coulomb efficiency (99.2 %). Meanwhile, Zn||MnO2 full battery based on ErCl3-added electrolyte also demonstrates a high reversible capacity of 157.1 mAh/g after 500 cycles. Obviously, the capacity decay rate of the full battery is also improved, only 0.113 % per cycle. This study offers a straightforward and economically efficient method for stabilizing the zinc anode and realizing high-performance AZIBs.

In-sewer stability of 31 human health biomarkers and suitability for wastewater-based epidemiology.

Monitoring urinary markers of dietary, disease, and stress by wastewater-based epidemiology (WBE) is a promising tool to better understand population health and wellbeing. However, common urinary biomarkers are subject to degradation in sewer systems and their fates have to be assessed before they can be used in WBE. This study investigated the stability of 31 urinary biomarkers (12 food biomarkers, 8 vitamins, 9 oxidative stress biomarkers, and 1 histamine biomarker) in a laboratory sewer sediment reactor and evaluated their suitability for WBE, considering their detectability in real wastewater and in-sewer stability. These biomarkers showed various transformation patterns, among which 16 compounds had half-lives <2 h while other 15 compounds presented moderate to high stability (2 to >500 h). Thirteen biomarkers showed potential for WBE because of their consistently measurable concentrations in untreated wastewater and sufficient in-sewer stability. Eighteen biomarkers were unsuitable due to their rapid in-sewer degradation and/or undetectable concentration levels in untreated wastewater using previous methods. Transformation rates of these biomarkers showed generally weak relationships with molecular properties but relatively higher correlations with biological activities in sewers. Overall, this study determined in-sewer stability of 31 health-related biomarkers through laboratory experiments, providing new findings to WBE for population health assessment.

Enhancing docosahexaenoic acid production in Aurantiochytrium species using atmospheric and room temperature plasma mutagenesis and comprehensive multi-omics analysis.

Aurantiochytrium sp. belongs to marine heterotrophic single-cell protist, which is an important decomposer in marine ecosystem. Aurantiochytrium sp. has gained notoriety because of its ability to accumulate high-value docosahexaenoic acid (DHA), but the key factors of DHA synthesis were unclear at present. In this study, Atmospheric and Room Temperature Plasma technology was applied to the mutagenic breeding of Aurantiochytrium sp., and transcriptomics and proteomics were adopted to analyze the DHA-biosynthesis mechanism. According to the growth and DHA accumulation profiles, the mutant strain Aurantiochytrium sp. R2A35 was selected. The DHA content in total lipids was greatly improved from 49.39 % of the wild strain R2 to 63.69 % of the mutant strain. Moreover, the DHA content in the biomass of Aurantiochytrium sp. R2A35 as 39.72 % was the highest DHA productivity reported so far. The differentially expressed genes distinguished from transcriptome and the TMT-identified differential proteins distinguished from proteome confirmed that the expression of acetyl-CoA carboxylase and ketoacyl reductase was up-regulated by 4.78-fold and 6.95-fold, respectively and the fatty acid synthase was concurrently down-regulated by 2.79-fold, so that more precursor was transported to the polyketide synthase pathway, thereby increasing the DHA yield in Aurantiochytrium sp. R2A35. This research would provide reference for the DHA metabolism process and contribute to the understanding of the decomposer - Aurantiochytrium sp. in marine ecosystems.

Performance and mechanisms of zero valent iron enhancing short-chain fatty acids production during thermophilic anaerobic fermentation of waste activated sludge.

This work first explored the feasibility and possible mechanisms of zero valent iron (ZVI) pretreatment on the generation of short-chain fatty acids (SCFAs) during thermophilic anaerobic fermentation of waste activated sludge (WAS). Results showed that ZVI enhanced the quantity of SCFAs. On Day 6, the SCFAs production reached 455.84 ± 47.88 mg COD/g VSS at 5 g/L of ZVI addition, which increased by 63.80 % relative to control. The presence of ZVI can effectively promote butyric-based fermentation. ZVI accelerated the destruction of extracellular polymeric substances (EPS) and interior sludge cells, as well as improved biodegradation of soluble organics. Also, ZVI enhanced key enzyme activities (i.e., BK and CoA-), thus promoting degradation rates of acidogenesis (6.30 ± 0.84 mg/(gVSS·h) in glucose) and acetogenesis (74.63 ± 0.29 mg/(gVSS·h) in butyrate). Compared to Fe(III), the contribution of Fe(II) was higher among the decomposition products of ZVI. Besides, ZVI favored Proteobacteria and Actinobacteria, which enhanced acetate formation and organic compounds disassimilation of the process, respectively. The abundance of Tepidiphilus, Thermobrachium and Tepidimicrobium was increased, indicating promoting the system stability of SCFAs production in thermophilic anaerobic fermentation.

Flexible All-Solid-State Asymmetric Supercapacitors Based on PPy-Decorated SrFeO3-δ Perovskites on Carbon Cloth.

The defective structure and high oxygen vacancy concentration of SrFeO3-δ perovskite enable fast ion-electron transport, but its low conductivity still hinders the high electrochemical performance. Herein, to enhance the conductivity of SrFeO3-δ-based electrodes, polypyrrole-modified SrFeO3-δ perovskite on carbon cloth (PPy@SFO@CC) has been successfully fabricated by electrodeposition of polypyrrole (PPy) on the surface of SFO@CC. The optimal PPy700@SFO@CC electrode exhibits a specific capacitance of 421 F g-1 at 1 A g-1. It was found that the outside PPy layer not only accelerates the electron transport and ion diffusion but also creates more oxygen vacancies in SrFeO3-δ, enhancing the charge storage performance significantly. Moreover, the NiCo2O4@CC//PPy700@SFO@CC device maintains a specific capacitance of 63.6% after 3000 cycles, which is ascribed to the weak adhesion forces between the active materials and carbon cloth. Finally, the all-solid-state flexible supercapacitor NiCo2O4@CC//PPy700@SFO@CC is constructed with PVA-KOH as the solid electrolyte, delivering an energy density of 16.9 W h kg-1 at a power density of 984 W kg-1. The flexible supercapacitor retains 69% of its specific capacitance after 1000 bending and folding times, demonstrating a certain degree of foldability. The present study opens new avenues for perovskite oxide-based flexible all-solid-state supercapacitors.

Subnanocyclic Molecule of 15-Crown-5 Inhibiting Interfacial Water Decomposition and Stabilizing Zinc Anodes via Regulation of Zn2+ Solvation Shell.

Aqueous zinc ion batteries exhibit a promising application prospect for next-generation energy storage devices. However, the decomposition of active H2O molecules on the Zn anode induces drastic dendrite formation, thereby impairing the performance for entire devices. To solve this challenge, we introduce subnanocyclic molecules of 15-Crown-5 as an additive into ZnSO4 electrolyte to stabilize the Zn anode. Owing to the binding property of crown ethers with alkali metal ions and the size-fit rule, the 15-Crown-5 additives enable effective regulation of the solvation structure of hydrated Zn2+ and reduce the efficient contact between Zn anode and active H2O, which are validated by the experimental analysis and theoretical calculations. Under the assistance of the 15-Crown-5 additive, the as-assembled Zn-based batteries deliver superior performance compared with ZnSO4 and 18-Crown-6contaning ZnSO4 electrolytes. This work shows a bright direction toward progress in aqueous batteries.

Assessment of environmental and carcinogenic health hazards from heavy metal contamination in sediments of wetlands.

Sediment contamination jeopardizes wetlands by harming aquatic organisms, disrupting food webs, and reducing biodiversity. Carcinogenic substances like heavy metals bioaccumulate in sediments and expose consumers to a greater risk of cancer. This study reports Pb, Cr, Cu, and Zn levels in sediments from eight wetlands in India. The Pb (51.25 ± 4.46 µg/g) and Cr (266 ± 6.95 µg/g) concentrations were highest in Hirakud, Cu (34.27 ± 2.2 µg/g) in Bhadrak, and Zn (55.45 ± 2.93 µg/g) in Koraput. The mean Pb, Cr, and Cu values in sediments exceeded the toxicity reference value. The contamination factor for Cr was the highest of the four metals studied at Hirakud (CF = 7.60) and Talcher (CF = 6.97). Furthermore, high and moderate positive correlations were observed between Cu and Zn (r = 0.77) and Pb and Cr (r = 0.36), respectively, across all sites. Cancer patients were found to be more concentrated in areas with higher concentrations of Pb and Cr, which are more carcinogenic. The link between heavy metals in wetland sediments and human cancer could be used to make policies that limit people's exposure to heavy metals and protect their health.

Wastewater-based epidemiology of Campylobacter spp.: A systematic review and meta-analysis of influent, effluent, and removal of wastewater treatment plants.

Campylobacter spp. is one of the four leading causes of diarrhoeal diseases worldwide, which are generally mild but can be fatal in children, the elderly, and immunosuppressed persons. The existing disease surveillance for Campylobacter infections is usually based on untimely clinical reports. Wastewater surveillance or wastewater-based epidemiology (WBE) has been developed for the early warning of disease outbreaks and the detection of the emerging new variants of human pathogens, especially after the global pandemic of COVID-19. However, the WBE monitoring of Campylobacter infections in communities is rare due to a few large data gaps. This study is a meta-analysis and systematic review of the prevalence of Campylobacter spp. in various wastewater samples, primarily the influent of wastewater treatment plants. The results showed that the overall prevalence of Campylobacter spp. was 53.26 % in influent wastewater and 52.97 % in all types of wastewater samples. The mean concentration in the influent was 3.31 ± 0.39 log10 gene copies or most probable number (MPN) per 100 mL. The detection method combining culture and PCR yielded the highest positive rate of 90.86 %, while RT-qPCR and qPCR were the two most frequently used quantification methods. In addition, the Campylobacter concentration in influent wastewater showed a seasonal fluctuation, with the highest concentration in the autumn at 3.46 ± 0.41 log10 gene copies or MPN per 100 mL. Based on the isolates of all positive samples, Campylobacter jejuni (62.34 %) was identified as the most prevalent species in wastewater, followed by Campylobacter coli (30.85 %) and Campylobacter lari (4.4 %). These findings provided significant data to further develop and optimize the wastewater surveillance of Campylobacter spp. infections. In addition, large data gaps were found in the decay of Campylobacter spp. in wastewater, indicating insufficient research on the persistence of Campylobacter spp. in wastewater.

Response of wastewater-based epidemiology predictor for the second wave of COVID-19 in Ahmedabad, India: A long-term data Perspective.

In this work, we present an eight-month longitudinal study of wastewater-based epidemiology (WBE) in Ahmedabad, India, where wastewater surveillance was introduced in September 2020 after the successful containment of the first wave of COVID-19 to predict the resurge of the infection during the second wave of the pandemic. The study aims to elucidate the weekly resolution of the SARS-CoV-2 RNA data for eight months in wastewater samples to predict the COVID-19 situation and identify hotspots in Ahmedabad. A total of 287 samples were analyzed for SARS-CoV-2 RNA using RT-PCR, and Spearman's rank correlation was applied to depict the early warning potential of WBE. During September 2020 to April 2021, the increasing number of positive wastewater influent samples correlated with the growing number of confirmed clinical cases. It also showed clear evidence of early detection of the second wave of COVID-19 in Ahmedabad (March 2021). 258 out of a total 287 samples were detected positive with at least two out of three SARS-CoV-2 genes (N, ORF- 1 ab, and S). Monthly variation represented a significant decline in all three gene copies in October compared to September 2020, followed by an abrupt increase in November 2020. A similar increment in the gene copies was observed in March and April 2021, which would be an indicator of the second wave of COVID-19. A lead time of 1-2 weeks was observed in the change of gene concentrations compared with clinically confirmed cases. Measured wastewater ORF- 1 ab gene copies ranged from 6.1 x 102 (October 2020) to 1.4 x 104 (November 2020) copies/mL, and wastewater gene levels typically lead to confirmed cases by one to two weeks. The study highlights the value of WBE as a monitoring tool to predict waves within a pandemic, identify local disease hotspots within a city, and guide rapid management interventions.

Triplex qPCR assay for Campylobacter jejuni and Campylobacter coli monitoring in wastewater.

Campylobacter spp. is one of the most frequent pathogens of bacterial gastroenteritis recorded worldwide. Campylobacter jejuni (C. jejuni) and Campylobacter coli (C. coli) are the two major disease-associated species, accounting for >95 % of infections, and thus have been selected for disease surveillance. Monitoring temporal variations in pathogen concentration and diversity excreted from community wastewater allows the early detection of outbreaks. Multiplex real-time/quantitative PCR (qPCR) enables multi-target quantification of pathogens in various types of samples including wastewater. Also, an internal amplification control (IAC) is required for each sample when adopting PCR-based methods for pathogen detection and quantification in wastewater to exclude the inhibition of the wastewater matrix. To achieve reliable quantification of C. jejuni and C. coli towards wastewater samples, this study developed and optimized a triplex qPCR assay by combining three qPCR primer-probe sets targeting Campylobacter jejuni subsp. jejuni, Campylobacter coli, and Campylobacter sputorum biovar sputorum (C. sputorum), respectively. This triplex qPCR assay not only can directly and simultaneously detect the concentration of C. jejuni and C. coli in wastewater but also can achieve the PCR inhibition control using C. sputorum primer-probe set. This is the first developed triplex qPCR assay with IAC for C. jejuni and C. coli, to be used in the wastewater-based epidemiology (WBE) applications. The optimized triplex qPCR assay enables the detection limit of the assay (ALOD100%) and wastewater (PLOD80%) as 10 gene copy/µL and 2 log10 cells/mL (2 gene copies/µL of extracted DNA), respectively. The application of this triplex qPCR to 52 real raw wastewater samples from 13 wastewater treatment plants demonstrated its potential as a high-throughput and economically viable tool for the long-term monitoring of C. jejuni and C. coli prevalence in communities and the surrounding environments. This study provided an accessible methodology and a solid foundation for WBE-based monitoring of Campylobacter spp. relevant diseases and paved the road for future WBE back-estimation of C. jejuni and C. coli prevalence.

Electronic Structure Optimization and Proton-Transfer Enhancement on Titanium Oxide-Supported Copper Nanoparticles for Enhanced Nitrogen Recycling from Nitrate-Contaminated Water.

Electrocatalytic reduction of nitrate to NH3 (NO3RR) on Cu offers sustainable NH3 production and nitrogen recycling from nitrate-contaminated water. However, Cu affords limited NO3RR activity owing to its unfavorable electronic state and the slow proton transfer on its surface, especially in neutral/alkaline media. Furthermore, although a synchronous "NO3RR and NH3 collection" system has been developed for nitrogen recycling from nitrate-laden water, no system is designed for natural water that generally contains low-concentration nitrate. Herein, we demonstrate that depositing Cu nanoparticles on a TiO2 support enables the formation of electron-deficient Cuδ+ species (0 < δ ≤ 2), which are more active than Cu0 in NO3RR. Furthermore, TiO2-Cu coupling induces local electric-field enhancement that intensifies water adsorption/dissociation at the interface, accelerating proton transfer for NO3RR on Cu. With the dual enhancements, TiO2-Cu delivers an NH3-N selectivity of 90.5%, mass activity of 41.4 mg-N h gCu-1, specific activity of 377.8 mg-N h-1 m-2, and minimal Cu leaching (<25.4 µg L-1) when treating 22.5 mg L-1 of NO3--N at -0.40 V, outperforming most of the reported Cu-based catalysts. A sequential NO3RR and NH3 collection system based on TiO2-Cu was then proposed, which could recycle nitrogen from nitrate-contaminated water under a wide concentration window of 22.5-112.5 mg L-1 at a rate of 209-630 mgN m-2 h-1. We also demonstrated this system could collect 83.9% of nitrogen from NO3--N (19.3 mg L-1) in natural lake water.

A critical review of chemical uses in urban sewer systems.

Chemical dosing is the most used strategy for sulfide and methane abatement in urban sewer systems. Although conventional physicochemical methods, such as sulfide oxidation (e.g., oxygen/nitrate), precipitation (e.g., iron salts), and pH elevation (e.g., magnesium hydroxide/sodium hydroxide) have been used since the last century, the high chemical cost, large environmental footprint, and side-effects on downstream treatment processes demand a sustainable and cost-effective alternative to these approaches. In this paper, we aimed to review the currently used chemicals and significant progress made in sustainable sulfide and methane abatement technology, including 1) the use of bio-inhibitors, 2) in situ chemical production, and 3) an effective dosing strategy. To enhance the cost-effectiveness of chemical applications in urban sewer systems, two research directions have emerged: 1) online control and optimization of chemical dosing strategies and 2) integrated use of chemicals in urban sewer and wastewater treatment systems. The integration of these approaches offers considerable system-wide benefits; however, further development and comprehensive studies are required.

Film-forming, stable, conductive composites of polyhistidine/graphene oxide for electrochemical quantification of trace Pb2.

Nanomaterials with unique properties, such as good film-formation and plentiful active atoms, play a vital role in the construction of electrochemical sensors. In this work, an in situ electrochemical synthesis of conductive polyhistidine (PHIS)/graphene oxide (GO) composite film (PHIS/GO) was designed to construct an electrochemical sensor for the sensitive detection of Pb2+. Herein, GO as an active material can directly form homogeneous and stable thin films on the electrode surface because of its excellent film-forming property. Then GO film was further functionalized by in situ electrochemical polymerization of histidine to obtain plentiful active atoms (N). Due to strong van der Waals forces between GO and PHIS, PHIS/GO film exhibited high stability. Furthermore, the electrical conductivity of PHIS/GO films was greatly improved by in situ electrochemical reduction technology and the plentiful active atoms (N) in PHIS are profitable for adsorbing Pb2+ from solution, tremendously enhancing the assay sensitivity. With the above unique property, the proposed electrochemical sensor showed high stability, a low detection limit (0.045 µg L-1) and a wide linear range (0.1-300 µg L-1) for the quantification of Pb2+. The method can also be extended to the synthesis of other film-forming nanomaterials to functionalize themselves and widen their potential applications, avoiding the addition of non-conductive film-forming substances.

The advantage of a two-stage nitrification method for fertilizer recovery from human urine.

Recycling nutrients (nitrogen, phosphorus, and potassium) from human urine can potentially offset more than 13% of global agricultural fertilizer demand. Biological nitrification is a promising method for converting volatile ammonia in high-strength human urine into stable ammonium nitrate (a typical fertilizer), but it is usually terminated in the intermediate production of nitrite due to the inhibition of nitrite-oxidizing bacteria by free nitrous acid (FNA). This study aimed to develop a stable nitrification process in a unique two-stage bioreactor by removing critical barriers associated with FNA inhibition. Experimental results show that half of the ammonium in high-strength urine was successfully converted into nitrate, forming valuable ammonium nitrate (with a nitrogen concentration greater than 1500 mg N/L). The ammonium nitrate solution could retain most phosphorus (75% ± 3%) and potassium (96% ± 1%) in human urine, resulting in nearly full nutrient recovery. Once concentrated, the liquid compound fertilizer of ammonium nitrate was generated. Based on an assessment of economic and environmental impacts at the urban scale, urine diversion for nutrient recovery using a technical combination of nitrification and reverse osmosis could reduce total energy input by 43%, greenhouse gas emission by 40%, and cost by 33% compared to conventional wastewater management. Further research is needed to optimize the two-stage nitrification method on a larger scale.

Moving forward with COVID-19: Future research prospects of wastewater-based epidemiology methodologies and applications.

Wastewater-based epidemiology (WBE) has been demonstrated for its great potential in tracking of coronavirus disease 2019 (COVID-19) transmission among populations despite some inherent methodological limitations. These include non-optimized sampling approaches and analytical methods; stability of viruses in sewer systems; partitioning/retention in biofilms; and the singular and inaccurate back-calculation step to predict the number of infected individuals in the community. Future research is expected to (1) standardize best practices in wastewater sampling, analysis and data reporting protocols for the sensitive and reproducible detection of viruses in wastewater; (2) understand the in-sewer viral stability and partitioning under the impacts of dynamic wastewater flow, properties, chemicals, biofilms and sediments; and (3) achieve smart wastewater surveillance with artificial intelligence and big data models. Further specific research is essential in the monitoring of other viral pathogens with pandemic potential and subcatchment applications to maximize the benefits of WBE beyond COVID-19.

Effects of sewer biofilms on the degradability of carbapenems in wastewater using laboratory scale bioreactors.

Carbapenems are last-resort antibiotics used to treat bacterial infections unsuccessfully treated by most common categories of antibiotics in humans. Most of their dosage is secreted unchanged as waste, thereby making its way into the urban water system. There are two major knowledge gaps addressed in this study to gain a better understanding of the effects of their residual concentrations on the environment and environmental microbiome: development of a UHPLC-MS/MS method of detection and quantification from raw domestic wastewater via direct injection and study of their stability in sewer environment during the transportation from domestic sewers to wastewater treatment plants. The UHPLC-MS/MS method was developed for four carbapenems: meropenem, doripenem, biapenem and ertapenem, and validation was performed in the range of 0.5-10 µg/L for all analytes, with limit of detection (LOD) and limit of quantification (LOQ) values ranging from 0.2-0.5 µg/L and 0.8-1.6 µg/L respectively. Laboratory scale rising main (RM) and gravity sewer (GS) bioreactors were employed to culture mature biofilms with real wastewater as the feed. Batch tests were conducted in RM and GS sewer bioreactors fed with carbapenem-spiked wastewater to evaluate the stability of carbapenems and compared against those in a control reactor (CTL) without sewer biofilms, over a duration of 12 h. Significantly higher degradation was observed for all carbapenems in RM and GS reactors (60 - 80%) as opposed to CTL reactor (5 - 15%), which indicates that sewer biofilms play a significant role in the degradation. First order kinetics model was applied to the concentration data along with Friedman's test and Dunn's multiple comparisons analysis to establish degradation patterns and differences in the degradation observed in sewer reactors. As per Friedman's test, there was a statistically significant difference in the degradation of carbapenems observed depending on the reactor type (p = 0.0017 - 0.0289). The results from Dunn's test indicate that the degradation in the CTL reactor was statistically different from that observed in either RM (p = 0.0033 - 0.1088) or GS (p = 0.0162 - 0.1088), with the latter two showing insignificant difference in the degradation rates observed (p = 0.2850 - 0.5930). The findings contribute to the understanding about the fate of carbapenems in urban wastewater and the potential application of wastewater-based epidemiology.

In-sewer decay and partitioning of Campylobacter jejuni and Campylobacter coli and implications for their wastewater surveillance.

Campylobacter jejuni and coli are two main pathogenic species inducing diarrhoeal diseases in humans, which are responsible for the loss of 33 million lives each year. Current Campylobacter infections are mainly monitored by clinical surveillance which is often limited to individuals seeking treatment, resulting in under-reporting of disease prevalence and untimely indicators of community outbreaks. Wastewater-based epidemiology (WBE) has been developed and employed for the wastewater surveillance of pathogenic viruses and bacteria. Monitoring the temporal changes of pathogen concentration in wastewater allows the early detection of disease outbreaks in a community. However, studies investigating the WBE back-estimation of Campylobacter spp. are rare. Essential factors including the analytical recovery efficiency, the decay rate, the effect of in-sewer transport, and the correlation between the wastewater concentration and the infections in communities are lacking to support wastewater surveillance. This study carried out experiments to investigate the recovery of Campylobacter jejuni and coli from wastewater and the decay under different simulated sewer reactor conditions. It was found that the recovery of Campylobacter spp. from wastewater varied with their concentrations in wastewater and depended on the detection limit of quantification methods. The concentration reduction of Campylobacter. jejuni and coli in sewers followed a two-phase reduction model, and the faster concentration reduction during the first phase is mainly due to their partitioning onto sewer biofilms. The total decay of Campylobacter. jejuni and coli varied in different types of sewer reactors, i.e. rising main vs. gravity sewer. In addition, the sensitivity analysis for WBE back-estimation of Campylobacter suggested that the first-phase decay rate constant (k1) and the turning time point (t1) are determining factors and their impacts increased with the hydraulic retention time of wastewater.