Multi-view fusion network-based gesture recognition using sEMG data.

sEMG(surface electromyography) signals have been widely used in rehabilitation medicine in the past decades because of their non-invasive, convenient and informative features, especially in human action recognition, which has developed rapidly. However, the research on sparse EMG in multi-view fusion has made less progress compared to high-density EMG signals, and for the problem of how to enrich sparse EMG feature information, a method that can effectively reduce the information loss of feature signals in the channel dimension is needed. In this paper, a novel IMSE (Inception-MaxPooling-Squeeze- Excitation) network module is proposed to reduce the loss of feature information during deep learning. Then, multiple feature encoders are constructed to enrich the information of sparse sEMG feature maps based on the multi-core parallel processing method in multi-view fusion networks, while SwT (Swin Transformer) is used as the classification backbone network. By comparing the feature fusion effects of different decision layers of the multi-view fusion network, it is experimentally obtained that the fusion of decision layers can better improve the classification performance of the network. In NinaPro DB1, the proposed network achieves 93.96% average accuracy in gesture action classification with the feature maps obtained in 300ms time window, and the maximum variation range of action recognition rate of individuals is less than 11.2%. The results show that the proposed framework of multi-view learning plays a good role in reducing individuality differences and augmenting channel feature information, which provides a certain reference for non-dense biosignal pattern recognition.

Multi-Objective Location and Mapping Based on Deep Learning and Visual Slam.

Simultaneous localization and mapping (SLAM) technology can be used to locate and build maps in unknown environments, but the constructed maps often suffer from poor readability and interactivity, and the primary and secondary information in the map cannot be accurately grasped. For intelligent robots to interact in meaningful ways with their environment, they must understand both the geometric and semantic properties of the scene surrounding them. Our proposed method can not only reduce the absolute positional errors (APE) and improve the positioning performance of the system but also construct the object-oriented dense semantic point cloud map and output point cloud model of each object to reconstruct each object in the indoor scene. In fact, eight categories of objects are used for detection and semantic mapping using coco weights in our experiments, and most objects in the actual scene can be reconstructed in theory. Experiments show that the number of points in the point cloud is significantly reduced. The average positioning error of the eight categories of objects in Technical University of Munich (TUM) datasets is very small. The absolute positional error of the camera is also reduced with the introduction of semantic constraints, and the positioning performance of the system is improved. At the same time, our algorithm can segment the point cloud model of objects in the environment with high accuracy.

Multi-Objective Optimization Design of Ladle Refractory Lining Based on Genetic Algorithm.

Genetic algorithm is widely used in multi-objective mechanical structure optimization. In this paper, a genetic algorithm-based optimization method for ladle refractory lining structure is proposed. First, the parametric finite element model of the new ladle refractory lining is established by using ANSYS Workbench software. The refractory lining is mainly composed of insulating layer, permanent layer and working layer. Secondly, a mathematical model for multi-objective optimization is established to reveal the functional relationship between the maximum equivalent force on the ladle lining, the maximum temperature on the ladle shell, the total mass of the ladle and the structural parameters of the ladle refractory lining. Genetic algorithm translates the optimization process of ladle refractory lining into natural evolution and selection. The optimization results show that, compared with the unoptimized ladle refractory lining structure (insulation layer thickness of 0 mm, permanent layer thickness of 81 mm, and working layer thickness of 152 mm), the refractory lining with insulation layer thickness of 8.02 mm, permanent layer thickness of 76.20 mm, and working layer thickness of 148.61 mm has the best thermal insulation performance and longer service life within the variation of ladle refractory lining structure parameters. Finally, the results of the optimization are verified and analyzed in this paper. The study found that by optimizing the design of the ladle refractory lining, the maximum equivalent force on the ladle lining, the maximum temperature on the ladle shell and the ladle mass were reduced. The thermal insulation performance and the lightweight performance of the ladle are improved, which is very important for improving the service life of the ladle.

Improved Multi-Stream Convolutional Block Attention Module for sEMG-Based Gesture Recognition.

As a key technology for the non-invasive human-machine interface that has received much attention in the industry and academia, surface EMG (sEMG) signals display great potential and advantages in the field of human-machine collaboration. Currently, gesture recognition based on sEMG signals suffers from inadequate feature extraction, difficulty in distinguishing similar gestures, and low accuracy of multi-gesture recognition. To solve these problems a new sEMG gesture recognition network called Multi-stream Convolutional Block Attention Module-Gate Recurrent Unit (MCBAM-GRU) is proposed, which is based on sEMG signals. The network is a multi-stream attention network formed by embedding a GRU module based on CBAM. Fusing sEMG and ACC signals further improves the accuracy of gesture action recognition. The experimental results show that the proposed method obtains excellent performance on dataset collected in this paper with the recognition accuracies of 94.1%, achieving advanced performance with accuracy of 89.7% on the Ninapro DB1 dataset. The system has high accuracy in classifying 52 kinds of different gestures, and the delay is less than 300 ms, showing excellent performance in terms of real-time human-computer interaction and flexibility of manipulator control.

Low-Illumination Image Enhancement Algorithm Based on Improved Multi-Scale Retinex and ABC Algorithm Optimization.

In order to solve the problems of poor image quality, loss of detail information and excessive brightness enhancement during image enhancement in low light environment, we propose a low-light image enhancement algorithm based on improved multi-scale Retinex and Artificial Bee Colony (ABC) algorithm optimization in this paper. First of all, the algorithm makes two copies of the original image, afterwards, the irradiation component of the original image is obtained by used the structure extraction from texture via relative total variation for the first image, and combines it with the multi-scale Retinex algorithm to obtain the reflection component of the original image, which are simultaneously enhanced using histogram equalization, bilateral gamma function correction and bilateral filtering. In the next part, the second image is enhanced by histogram equalization and edge-preserving with Weighted Guided Image Filtering (WGIF). Finally, the weight-optimized image fusion is performed by ABC algorithm. The mean values of Information Entropy (IE), Average Gradient (AG) and Standard Deviation (SD) of the enhanced images are respectively 7.7878, 7.5560 and 67.0154, and the improvement compared to original image is respectively 2.4916, 5.8599 and 52.7553. The results of experiment show that the algorithm proposed in this paper improves the light loss problem in the image enhancement process, enhances the image sharpness, highlights the image details, restores the color of the image, and also reduces image noise with good edge preservation which enables a better visual perception of the image.

Genetic-Based Optimization of 3D Burch-Schneider Cage With Functionally Graded Lattice Material.

A Burch-Schneider (BS) cage is a reinforcement device used in total hip arthroplasty (THA) revision surgeries to bridge areas of acetabular loss. There have been a variety of BS cages in the market, which are made of solid metal. However, significant differences in structural configuration and mechanical behavior between bone and metal implants cause bone resorption and interface loosening, and hence lead to failure of the implant in the long term. To address this issue, an optimal design framework for a cellular BS cage was investigated in this study by genetic algorithm and topology optimization, inspired by porous human bone with variable holes. In this optimization, a BS cage is constructed with functionally graded lattice material which gradually evolves to achieve better mechanical behavior by natural selection and natural genetics. Clinical constraints that allow adequate bone ingrowth and manufacturing constraint that ensures the realization of the optimized implant are considered simultaneously. A homogenization method is introduced to calculate effective mechanical properties of octet-truss lattice material in a given range of relative density. At last, comparison of the optimum lattice BS cage with a fully solid cage and a lattice cage with identical element density indicates the validity of the optimization design strategy proposed in this article.

Behavior Strategy Analysis Based on the Multi-Stakeholder Game under the Plastic Straw Ban in China.

Since 1 January 2021, China has banned nondegradable disposable straws in the catering industry. To promote the enforcement of the ban of plastic straws and improve the relationship between economic development and environmental protection, based on the evolutionary game method, this paper constructs the game model from the supply side and the demand side, respectively. Subsequently, through the dynamic equation, stable system evolution strategy is obtained. Furthermore, simulation is conducted to test the influence of the main parameters in the model on the evolution of system strategy. The results show that (1) the change of the government strategy mainly depends on its regulation costs and revenue, while the production strategy of a company is affected by the government and consumer strategies. (2) From the perspective of enterprise supply, government subsidies can promote technological innovation and develop new plastic straw substitutes. However, government penalties have little effect on violating enterprises. In addition, from the perspective of enterprise demand, with the collaboration of enterprises and consumers, it is easier for enterprises to carry out technological innovation. (3) Consumer acceptance of the substitutes for disposable plastic straws as well as online comments have a decisive influence on the enterprises' selections for research and development (R&D) strategies.

Dynamic Gesture Recognition Using Surface EMG Signals Based on Multi-Stream Residual Network.

Gesture recognition technology is widely used in the flexible and precise control of manipulators in the assisted medical field. Our MResLSTM algorithm can effectively perform dynamic gesture recognition. The result of surface EMG signal decoding is applied to the controller, which can improve the fluency of artificial hand control. Much current gesture recognition research using sEMG has focused on static gestures. In addition, the accuracy of recognition depends on the extraction and selection of features. However, Static gesture research cannot meet the requirements of natural human-computer interaction and dexterous control of manipulators. Therefore, a multi-stream residual network (MResLSTM) is proposed for dynamic hand movement recognition. This study aims to improve the accuracy and stability of dynamic gesture recognition. Simultaneously, it can also advance the research on the smooth control of the Manipulator. We combine the residual model and the convolutional short-term memory model into a unified framework. The architecture extracts spatiotemporal features from two aspects: global and deep, and combines feature fusion to retain essential information. The strategy of pointwise group convolution and channel shuffle is used to reduce the number of network calculations. A dataset is constructed containing six dynamic gestures for model training. The experimental results show that on the same recognition model, the gesture recognition effect of fusion of sEMG signal and acceleration signal is better than that of only using sEMG signal. The proposed approach obtains competitive performance on our dataset with the recognition accuracies of 93.52%, achieving state-of-the-art performance with 89.65% precision on the Ninapro DB1 dataset. Our bionic calculation method is applied to the controller, which can realize the continuity of human-computer interaction and the flexibility of manipulator control.

[Design of Monitorable Wrist Orthosis Based on 3D Printing].

A 3D printing based wrist orthosis device was developed. After collecting the contour information of the carpal and metacarpophalangeal joints of the patients with a 3D scanner, the wrist orthotics were designed to meet the individual needs of the patients according to the relevant requirements of biomechanics. Choose TPU (thermoplastic polyurethanes) materials for preparation of 3D printing. It can functionally assist the smart brace after stroke patients with hemiplegia early rehabilitation training, the use of orthoses carry MPU6050 inertial sensor, magnetometer, time module device such as a sensor and monitor its movements and record the training time, ensure safe efficient rehabilitation training, help patients return to a normal life as soon as possible.

Genetic Algorithm-Based Trajectory Optimization for Digital Twin Robots.

Mobile robots have an important role in material handling in manufacturing and can be used for a variety of automated tasks. The accuracy of the robot's moving trajectory has become a key issue affecting its work efficiency. This paper presents a method for optimizing the trajectory of the mobile robot based on the digital twin of the robot. The digital twin of the mobile robot is created by Unity, and the trajectory of the mobile robot is trained in the virtual environment and applied to the physical space. The simulation training in the virtual environment provides schemes for the actual movement of the robot. Based on the actual movement data returned by the physical robot, the preset trajectory of the virtual robot is dynamically adjusted, which in turn enables the correction of the movement trajectory of the physical robot. The contribution of this work is the use of genetic algorithms for path planning of robots, which enables trajectory optimization of mobile robots by reducing the error in the movement trajectory of physical robots through the interaction of virtual and real data. It provides a method to map learning in the virtual domain to the physical robot.

Self-Tuning Control of Manipulator Positioning Based on Fuzzy PID and PSO Algorithm.

With the manipulator performs fixed-point tasks, it becomes adversely affected by external disturbances, parameter variations, and random noise. Therefore, it is essential to improve the robust and accuracy of the controller. In this article, a self-tuning particle swarm optimization (PSO) fuzzy PID positioning controller is designed based on fuzzy PID control. The quantization and scaling factors in the fuzzy PID algorithm are optimized by PSO in order to achieve high robustness and high accuracy of the manipulator. First of all, a mathematical model of the manipulator is developed, and the manipulator positioning controller is designed. A PD control strategy with compensation for gravity is used for the positioning control system. Then, the PID controller parameters dynamically are minute-tuned by the fuzzy controller 1. Through a closed-loop control loop to adjust the magnitude of the quantization factors-proportionality factors online. Correction values are outputted by the modified fuzzy controller 2. A quantization factor-proportion factor online self-tuning strategy is achieved to find the optimal parameters for the controller. Finally, the control performance of the improved controller is verified by the simulation environment. The results show that the transient response speed, tracking accuracy, and follower characteristics of the system are significantly improved.

Simultaneous Calibration: A Joint Optimization Approach for Multiple Kinect and External Cameras.

Camera calibration is a crucial problem in many applications, such as 3D reconstruction, structure from motion, object tracking and face alignment. Numerous methods have been proposed to solve the above problem with good performance in the last few decades. However, few methods are targeted at joint calibration of multi-sensors (more than four devices), which normally is a practical issue in the real-time systems. In this paper, we propose a novel method and a corresponding workflow framework to simultaneously calibrate relative poses of a Kinect and three external cameras. By optimizing the final cost function and adding corresponding weights to the external cameras in different locations, an effective joint calibration of multiple devices is constructed. Furthermore, the method is tested in a practical platform, and experiment results show that the proposed joint calibration method can achieve a satisfactory performance in a project real-time system and its accuracy is higher than the manufacturer's calibration.

An Interactive Image Segmentation Method in Hand Gesture Recognition.

In order to improve the recognition rate of hand gestures a new interactive image segmentation method for hand gesture recognition is presented, and popular methods, e.g., Graph cut, Random walker, Interactive image segmentation using geodesic star convexity, are studied in this article. The Gaussian Mixture Model was employed for image modelling and the iteration of Expectation Maximum algorithm learns the parameters of Gaussian Mixture Model. We apply a Gibbs random field to the image segmentation and minimize the Gibbs Energy using Min-cut theorem to find the optimal segmentation. The segmentation result of our method is tested on an image dataset and compared with other methods by estimating the region accuracy and boundary accuracy. Finally five kinds of hand gestures in different backgrounds are tested on our experimental platform, and the sparse representation algorithm is used, proving that the segmentation of hand gesture images helps to improve the recognition accuracy.