RESUMEN
Traditional noble metal oxide, such as RuO2, is considered a benchmark catalyst for acidic oxygen evolution reaction (OER). However, its practical application is limited due to sluggish activity and severe electrochemical corrosion. In this study, Ru-Fe nanoparticles loading on carbon felt (RuFe@CF) is synthesized via an ultrafast Joule heating method as an active and durable OER catalyst in acidic conditions. Remarkably low overpotentials of 188 and 269 mV are achieved at 10 and 100 mA cm-2, respectively, with a robust stability up to 620 h at 10 mA cm-2. When used as an anode in a proton exchange membrane water electrolyzer, the catalyst shows more than 250 h of stability at a water-splitting current of 200 mA cm-2. Experimental characterizations reveal the presence of a Ru-based oxide nanosheath on the surface of the catalyst during OER tests, suggesting a surface reconstruction process that enhances the intrinsic activity and inhibits continuous metal dissolution. Moreover, density functional theory calculations demonstrate that the introduction of Fe into the RuFe@CF catalyst reduces the energy barrier and boosts its activities. This work offers an effective and universal strategy for the development of highly efficient and stable catalysts for acidic water splitting.
RESUMEN
The development of efficient, stable, and low-cost bifunctional catalysts for the hydrogen evolution/oxidation reaction (HER/HOR) is critical to promote the application of hydrogen gas batteries in large scale energy storage systems. Here we demonstrate a non-noble metal high-entropy alloy grown on Cu foam (NNM-HEA@CF) as a self-supported catalytic electrode for nickel-hydrogen gas (Ni-H2) batteries. Experimental and theoretical calculation results reveal that the NNM-HEA catalyst greatly facilitates the HER/HOR catalytic process through the optimized electronic structures of the active sites. The assembled Ni-H2 battery with NNM-HEA@CF as the anode shows excellent rate capability and exceptional cycling performance of over 1800 h without capacity decay at an areal capacity of 15 mAh cm-2. Furthermore, a scaled-up Ni-H2 battery fabricated with an extended capacity of 0.45 Ah exhibits a high cell-level energy density of â¼109.3 Wh kg-1. Moreover, its estimated cost reaches as low as â¼107.8 $ kWh-1 based on all key components of electrodes, separator and electrolyte, which is reduced by more than 6 times compared to that of the commercial Pt/C-based Ni-H2 battery. This work provides an approach to develop high-efficiency non-noble metal-based bifunctional catalysts for hydrogen batteries in large-scale energy storage applications.
RESUMEN
Rechargeable hydrogen gas batteries, driven by hydrogen evolution and oxidation reactions (HER/HOR), are emerging grid-scale energy storage technologies owing to their low cost and superb cycle life. However, compared with aqueous electrolytes, the HER/HOR activities in nonaqueous electrolytes have rarely been studied. Here, for the first time, we develop a nonaqueous proton electrolyte (NAPE) for a high-performance hydrogen gas-proton battery for all-climate energy storage applications. The advanced nonaqueous hydrogen gas-proton battery (NAHPB) assembled with a representative V2(PO4)3 cathode and H2 anode in a NAPE exhibits a high discharge capacity of 165 mAh g-1 at 1 C at room temperature. It also efficiently operates under all-climate conditions (from -30 to +70 °C) with an excellent electrochemical performance. Our findings offer a new direction for designing nonaqueous proton batteries in a wide temperature range.
RESUMEN
Hydrogen-chlorine (H2-Cl2) fuel cells have distinct merits due to fast electrochemical kinetics but are afflicted by high cost, low efficiency, and poor reversibility. The development of a rechargeable H2-Cl2 battery is highly desirable yet challenging. Here, we report a rechargeable H2-Cl2 battery operating statically in a wide temperature ranging from -70 to 40 °C, which is enabled by a reversible Cl2/Cl- redox cathode and an electrocatalytic H2 anode. A hierarchically porous carbon cathode is designed to achieve effective Cl2 gas confinement and activate the discharge plateau of Cl2/Cl- redox at room temperature, with a discharge plateau at â¼1.15 V and steady cycling for over 500 cycles without capacity decay. Furthermore, the battery operation at an ultralow temperature is successfully achieved in a phosphoric acid-based antifreezing electrolyte, with a reversible discharge capacity of 282 mAh g-1 provided by the highly porous carbon at -70 °C and an average Coulombic efficiency of 91% for more than 300 cycles at -40 °C. This work offers a new strategy to enhance the reversibility of aqueous chlorine batteries for energy storage applications in a wide temperature range.
RESUMEN
Aqueous proton batteries (APBs) have emerged as one of the most promising batteries for large-scale energy storage technology. However, they usually show an undesirable electrochemical performance. Herein, we demonstrate a novel aqueous catalytic hydrogen gas powered organic proton (HOP) battery, which is driven by hydrogen evolution/oxidation redox reactions via commercial nanocatalysts on the anode and coordination/decoordination reactions of CâO with H+ on the cathode. The HOP battery shows an excellent rate capacity of 190.1 mAh g-1 at 1 A g-1 and 71.4 mAh g-1 at 100 A g-1. It also delivers a capacity of 96.6 mAh g-1 after 100000 cycles and operates at temperatures down to -70 °C. Moreover, the HOP battery is fabricated in a large-scale pouch cell with an extended capacity, exhibiting its potential for practical energy storage applications. This work provides new insights into the building of sustainable APBs, which will broaden the horizons of high-performance aqueous batteries.
RESUMEN
The high reliability and proven ultra-longevity make aqueous hydrogen gas (H2 ) batteries ideal for large-scale energy storage. However, the low alkaline hydrogen evolution and oxidation reaction (HER/HOR) activities of expensive platinum catalysts severely hamper their widespread applications in H2 batteries. Here, cost-effective, highly active electrocatalysts, with a model of ruthenium-nickel alloy nanoparticles in ≈3 nm anchored on carbon black (RuNi/C) as an example, are developed by an ultrafast electrical pulse approach for nickel-hydrogen gas (NiH2 ) batteries. Having a competitive low cost of about one fifth of Pt/C benckmark, this ultrafine RuNi/C catalyst displays an ultrahigh HOR mass activity of 2.34 A mg-1 at 50 mV (vs RHE) and an ultralow HER overpotential of 19.5 mV at a current density of 10 mA cm-2 . As a result, the advanced NiH2 battery can efficiently operate under all-climate conditions (from -25 to +50 °C) with excellent durability. Notably, the NiH2 cell stack achieves an energy density up to 183 Wh kg-1 and an estimated cost of ≈49 $ kWh-1 under an ultrahigh cathode Ni(OH)2 loading of 280 mg cm-2 and a low anode Ru loading of ≈62.5 µg cm-2 . The advanced beyond-industrial-level hydrogen gas batteries provide great opportunities for practical grid-scale energy storage applications.
RESUMEN
Aqueous nickel-hydrogen gas (Ni-H2) batteries with excellent durability (>10,000 cycles) are important candidates for grid-scale energy storage but are hampered by the high-cost Pt electrode with limited performance. Herein, we report a low-cost nickel-molybdenum (NiMo) alloy as an efficient bifunctional hydrogen evolution and oxidation reaction (HER/HOR) catalyst for Ni-H2 batteries in alkaline electrolytes. The NiMo alloy demonstrates a high HOR mass-specific kinetic current of 28.8 mA mg-1 at 50 mV as well as a low HER overpotential of 45 mV at a current density of 10 mA cm-2, which is better than most nonprecious metal catalysts. Furthermore, we apply a solid-liquid-gas management strategy to constitute a conductive, hydrophobic network of NiMo using multiwalled carbon nanotubes (NiMo-hydrophobic MWCNT) in the electrode to accelerate HER/HOR activities for much improved Ni-H2 battery performance. As a result, Ni-H2 cells based on the NiMo-hydrophobic MWCNT electrode show a high energy density of 118 Wh kg-1 and a low cost of only 67.5 $ kWh-1. With the low cost, high energy density, excellent durability, and improved energy efficiency, the Ni-H2 cells show great potential for practical grid-scale energy storage.
RESUMEN
In conventional water electrolysis (CWE), the H2 and O2 evolution reactions (HER/OER) are tightly coupled, making the generated H2 and O2 difficult to separate, thus resulting in complex separation technology and potential safety issues. Previous efforts on the design of decoupled water electrolysis mainly concentrated on multi-electrode or multi-cell configurations; however, these strategies have the limitation of involving complicated operations. Here, we propose and demonstrate a pH-universal, two-electrode capacitive decoupled water electrolyzer (referred to as all-pH-CDWE) in a single-cell configuration by utilizing a low-cost capacitive electrode and a bifunctional HER/OER electrode to separate H2 and O2 generation for decoupling water electrolysis. In the all-pH-CDWE, high-purity H2 and O2 generation alternately occur at the electrocatalytic gas electrode only by reversing the current polarity. The designed all-pH-CDWE can maintain a continuous round-trip water electrolysis for over 800 consecutive cycles with an electrolyte utilization ratio of nearly 100%. As compared to CWE, the all-pH-CDWE achieves energy efficiencies of 94% in acidic electrolytes and 97% in alkaline electrolytes at a current density of 5 mA cm-2. Further, the designed all-pH-CDWE can be scaled up to a capacity of 720 C in a high current of 1 A for each cycle with a stable HER average voltage of 0.99 V. This work provides a new strategy toward the mass production of H2 in a facilely rechargeable process with high efficiency, good robustness, and large-scale applications.
RESUMEN
Aluminum (Al) metal is an attractive anode material for next-generation rechargeable batteries, because of its low cost and high capacities. However, it brings some fundamental issues such as dendrites, low Coulombic efficiency (CE), and low utilization. Here, we propose a strategy for constructing an ultrathin aluminophilic interface layer (AIL) to regulate the Al nucleation and growth behaviors, which enables highly reversible and dendrite-free Al plating/stripping under high areal capacity. Metallic Al can maintain stable plating/stripping on the Pt-AIL@Ti for over 2000 h at 10 mAh cm-2 with an average CE of 99.9%. The Pt-AIL also enables reversible Al plating/stripping at a record high areal capacity of 50 mAh cm-2, which is 1-2 orders of magnitude higher than the previous studies. This work provides a valuable direction for further construction of high-performance rechargeable Al metal batteries.
RESUMEN
The development of Zn-free anodes to inhibit Zn dendrite formation and modulate high-capacity Zn batteries is highly applauded yet very challenging. Here, we design a robust two-dimensional antimony/antimony-zinc alloy heterostructured interface to regulate Zn plating. Benefiting from the stronger adsorption and homogeneous electric field distribution of the Sb/Sb2Zn3-heterostructured interface in Zn plating, the Zn anode enables an ultrahigh areal capacity of 200 mAh cm-2 with an overpotential of 112 mV and a Coulombic efficiency of 98.5%. An anode-free Zn-Br2 battery using the Sb/Sb2Zn3-heterostructured interface@Cu anode shows an attractive energy density of 274 Wh kg-1 with a practical pouch cell energy density of 62 Wh kg-1. The scaled-up Zn-Br2 battery in a capacity of 500 mAh exhibits over 400 stable cycles. Further, the Zn-Br2 battery module in an energy of 9 Wh (6 V, 1.5 Ah) is integrated with a photovoltaic panel to demonstrate the practical renewable energy storage capabilities. Our superior anode-free Zn batteries enabled by the heterostructured interface enlighten an arena towards large-scale energy storage applications.
RESUMEN
Hydrogen gas batteries are regarded as one of the most promising rechargeable battery systems for large-scale energy storage applications due to their advantages of high rates and long-term cycle lives. However, the development of cost-effective and low-temperature-tolerant hydrogen gas batteries is highly desirable yet very challenging. Herein, we report a novel conductive polymer-hydrogen gas battery that is suitable for ultralow-temperature energy storage applications and consists of a hydrogen gas anode, a conductive polymer cathode using polyaniline (PANI) or polypyrrole as examples, and protonic acidic electrolytes. The PANI-H2 battery using 1 M H2SO4 as the electrolyte exhibits a capacity of 67 mA h/g, a remarkable rate up to 15 A/g, a Coulombic efficiency around 100%, and an ultra-long life of 10,000 cycles. Using the anti-freezing 9 M H3PO4 electrolyte, the PANI-H2 battery can operate well at temperatures down to -70 °C, which maintains â¼70% of the capacity at room temperature and shows an excellent cycle stability under -60 °C. Benefiting from the fast redox kinetics of both electrodes, this work demonstrates excellent rate performance and low-temperature feasibility of conductive polymer-H2 batteries, providing a new avenue for further development of low-cost and reliable polymer-H2 batteries for large-scale energy storage.
RESUMEN
The electrochemical CO2 reduction reaction (CO2RR) is a promising strategy to alleviate excessive CO2 levels in the atmosphere and produce value-added feedstocks and fuels. However, the synthesis of high-efficiency and robust electrocatalysts remains a great challenge. This work reports the green preparation of surface-oxygen-rich carbon-nanorod-supported bismuth nanoparticles (SOR Bi@C NPs) for an efficient CO2RR toward formate. The resultant SOR Bi@C NPs catalyst displays a Faradaic efficiency of more than 91% for formate generation over a wide potential range of 440 mV. Ex situ XPS and XANES and in situ Raman spectroscopy demonstrate that the Bi-O/Bi (110) structure in the pristine SOR Bi@C NPs can remain stable during the CO2RR process. DFT calculations reveal that the Bi-O/Bi (110) structure can facilitate the formation of the *OCHO intermediate. This work provides an approach to the development of high-efficiency Bi-based catalysts for the CO2RR and offers a unique insight into the exploration of advanced electrocatalysts.
RESUMEN
Rechargeable hydrogen gas batteries (RHGBs) have been attracting much attention as promising all-climate large-scale energy storage devices, which calls for low-cost and high-activity hydrogen evolution/oxidation reaction (HER/HOR) bifunctional electrocatalysts to replace the costly platinum-based catalysts. Based on density functional theory (DFT) computations, herein we report an effective descriptor-driven design principle to govern the HER/HOR electrocatalytic activity of double-atom catalysts (DACs) for RHGBs. We systematically investigate the d-band center variation of DACs and their correlations with HER/HOR free energies. We construct activity maps with the d-band center of DACs as a descriptor, which demonstrate that high HER/HOR electrocatalytic activity can be achieved with an appropriate d-band center of DACs. This work not only broadens the applicability of d-band center theory to the prediction of bifunctional HER/HOR electrocatalysts but also paves the way to fast screening and design of efficient and low-cost DACs to promote practical applications of RHGBs.
RESUMEN
Ever-increasing global energy consumption has driven the development of renewable energy technologies to reduce greenhouse gas emissions and air pollution. Battery energy storage systems (BESS) with high electrochemical performance are critical for enabling renewable yet intermittent sources of energy such as solar and wind. In recent years, numerous new battery technologies have been achieved and showed great potential for grid scale energy storage (GSES) applications. However, their practical applications have been greatly impeded due to the gap between the breakthroughs achieved in research laboratories and the industrial applications. In addition, various complex applications call for different battery performances. Matching of diverse batteries to various applications is required to promote practical energy storage research achievement. This review provides in-depth discussion and comprehensive consideration in the battery research field for GSES. The overall requirements of battery technologies for practical applications with key parameters are systematically analyzed by generating standards and measures for GSES. We also discuss recent progress and existing challenges for some representative battery technologies with great promise for GSES, including metal-ion batteries, lead-acid batteries, molten-salt batteries, alkaline batteries, redox-flow batteries, metal-air batteries, and hydrogen-gas batteries. Moreover, we emphasize the importance of bringing emerging battery technologies from academia to industry. Our perspectives on the future development of batteries for GSES applications are provided.
RESUMEN
Conventional electric double-layer capacitors are energy storage devices with a high specific power and extended cycle life. However, the low energy content of this class of devices acts as a stumbling block to widespread adoption in the energy storage field. To circumvent the low-energy drawback of electric double-layer capacitors, here we report the assembly and testing of a hybrid device called electrocatalytic hydrogen gas capacitor containing a hydrogen gas negative electrode and a carbon-based positive electrode. This device operates using pH-universal aqueous electrolyte solutions (i.e., from 0 to 14) in a wide temperature range (i.e., from - 70 °C to 60 °C). In particular, we report specific energy and power of 45 Wh kg-1 and 458 W kg-1 (both values based on the electrodes' active materials mass), respectively, at 1 A g-1 and 25 °C with 9 M H3PO4 electrolyte solution. The device also enables capacitance retention of 85% (final capacitance of about 114 F g-1) after 100,000 cycles at 10 A g-1 and 25 °C with 1 M phosphate buffer electrolyte solution.
RESUMEN
The renaissance of long-lasting nickel-hydrogen gas (Ni-H2) battery by developing efficient, robust, and affordable hydrogen anode to replace Pt is particularly attractive for large-scale energy storage applications. Here, we demonstrate an extremely facile corrosion induced fabrication approach to achieve a self-supporting hydrogen evolution/oxidation reaction (HER/HOR) bifunctional nanosheet array electrode for Ni-H2 battery. The electrode is constituted by ultrafine Ru nanoparticles on Ni(OH)2 nanosheets grown on nickel foam. Experimental and theoretical calculation results reveal that the electrode with optimized geometric and electronic structures ensures the efficient and robust catalytic hydrogen activities. The fabricated Ni-H2 battery using the Ru-Ni(OH)2/NF anode with an industrial scale areal capacity of 16 mAh cm-2 demonstrates a high energy density, good rate capability and excellent durability without capacity decay over 1800 h. This study casts light on the development of low manufacturing cost and high performance bifunctional hydrogen catalytic electrodes for future hydrogen energy applications.
RESUMEN
The electrochemical reduction of CO2 to produce carbon-based fuels and chemicals possesses huge potentials to alleviate current environmental problems. However, it is confronted by great challenges in the design of active electrocatalysts with low overpotentials and high product selectivity. Here we report the atomic tuning of a single-Fe-atom catalyst with phosphorus (Fe-N/P-C) on commercial carbon black as a robust electrocatalyst for CO2 reduction. The Fe-N/P-C catalyst exhibits impressive performance in the electrochemical reduction of CO2 to CO, with a high Faradaic efficiency of 98% and a high mass-normalized turnover frequency of 508.8 h-1 at a low overpotential of 0.34 V. On the basis of ex-situ X-ray absorption spectroscopy measurements and DFT calculations, we reveal that the tuning of P in single-Fe-atom catalysts reduces the oxidation state of the Fe center and decreases the free-energy barrier of *CO intermediate formation, consequently maintaining the electrocatalytic activity and stability of single-Fe-atom catalysts.
RESUMEN
Aqueous proton batteries are regarded as one of the most promising energy technologies for next-generation grid storage due to the distinctive merits of H+ charge carriers with small ionic radius and light weight. Various materials have been explored for aqueous proton batteries; however, their full batteries show undesirable electrochemical performance with limited rate capability and cycling stability. Here we introduce a novel aqueous proton full battery that shows remarkable rate capability, cycling stability, and ultralow temperature performance, which is driven by a hydrogen gas anode and a Prussian blue analogue cathode in a concentrated phosphoric acid electrolyte. Its operation involves hydrogen evolution/oxidation redox reactions on the anode and H+ insertion/extraction reactions on the cathode, in parallel with the ideal transfer of only H+ between these two electrodes. The fabricated aqueous hydrogen gas-proton battery exhibits an unprecedented charge/discharge capability of up to 960 C with a superior power density of 36.5 kW kg-1, along with an ultralong cycle life of over 0.35 million cycles. Furthermore, this hydrogen gas-proton battery is able to work well at an ultralow temperature of -80 °C with 54% of its room-temperature capacity and under -60 °C with a stable cycle life of 1150 cycles. This work provides new opportunities to construct aqueous proton batteries with high performance in extreme conditions for large-scale energy storage.
RESUMEN
An aqueous electrolytic MnO2-Zn battery with eye-catching Mn2+/MnO2 cathode chemistry has been attracting immense interest for next-generation energy storage devices due to its irreplaceable advantages. However, the limited MnO2 conductivity restricts its long service life at high areal capacities. Here, we report a high-performance electrolytic MnO2-Zn battery via a bromine redox mediator, to enhance its electrochemical performance. The MnO2/Br2-Zn battery displays a high discharge voltage of 1.98 V with a capacity of â¼5.8 mAh cm-2. It also shows an excellent rate performance of 20 C with a long-term stability of over 600 cycles. Furthermore, the scaled-up MnO2/Br2-Zn battery with a capacity of â¼950 mAh exhibits a stable 100 cycles with a practical cell energy density of â¼32.4 Wh kg-1 and an attractively low energy cost of below 15 US$ kWh-1. The design approach can be generalized to other electrodes and battery systems, thus opening up new possibilities for large-scale energy storage.