RESUMEN
In tumor therapy, copper (Cu)-based nanozymes with peroxidase-like activity play a crucial role in converting hydrogen peroxide into hydroxyl radicals (OH). This process induces immunogenic cell death, which in turn activates the body's immune response, enhancing the efficacy of tumor immunotherapy. Nonetheless, the efficiency of this reaction is curtailed due to the oxidation of Cu(I) to Cu(II), leading to the self-depletion of the nanozyme's activity and an insufficient yield of OH for effective immunotherapeutic activation. To surmount this challenge, our research introduces a photocharging self-doped semiconductor nanozyme, copper sulfide (Cu9S8). The photocharging effect enables the nanozyme to convert internal Cu(II) back to Cu(I) through charge transfer induced by near-infrared (NIR)-II photothermal energy, thereby effectively maintaining the enzyme-like activity of the nanozyme. Additionally, Cu9S8 is enhanced with a calcium sulfide (CaS) coating. This coating reacts in the acidic microenvironment of tumors to generate hydrogen sulfide (H2S) gas, which in turn suppresses the catalase activity inherent in tumor cells, ensuring a plentiful supply of H2O2 for the nanozyme's operation. This dual strategy of amplifying enzyme-like activity and substrate availability culminates in the generation of ample OH within tumor cells, leading to significant immunogenic cell death and thereby realizing potent immunotherapy.
RESUMEN
Photodynamic therapy (PDT) is long-standing suffered from elevated tumor interstitial fluid pressure (TIFP) and prevalent hypoxic microenvironment within the solid malignancies. Herein, sound-activated flexocatalysis is developed to overcome the dilemma of PDT through both enhancing tumor penetration of photosensitizers by reducing TIFP and establishing an oxygen-rich microenvironment. In detail, a Schottky junction is constructed by flexocatalyst MoSe2 nanoflowers and Pt. Subsequently, the Schottky junction is loaded with the photosensitizer indocyanine green (ICG) and encapsulated within tumor cytomembrane to constitute a bionic-flexocatalytic nanomedicine (MPI@M). After targeting the tumor, MPI@M orchestrates flexocatalytic water splitting in tumor interstitial fluid under acoustic stimulation to lower TIFP, which boosted the tumor penetration of ICG. Concurrently, the oxygen released from the flexocatalytic water splitting overcomes the limitation of hypoxia against PDT. Furthermore, superfluous singlet oxygen generated by PDT can induce mitochondrial dysfunction for further tumor cell apoptosis. After 60 min of flexocatalysis, both the 30% decrease of TIFP and the relieved tumor hypoxia are observed, significantly promoting the therapeutic effect of PDT. Consequently, MoSe2/Pt junction nanoflowers, with the excellent flexocatalytic performance, hold significant potential for future applications in biocatalytic cancer therapies.
RESUMEN
Chromatin remodeler ARID1A regulates gene transcription by modulating nucleosome positioning and chromatin accessibility. While ARID1A-mediated stage and lineage-restricted gene regulation during cell fate canalization remains unresolved. Using osteoclastogenesis as a model, we show that ARID1A transcriptionally safeguards the osteoclast (OC) fate canalization during proliferation-differentiation switching at single-cell resolution. Notably, ARID1A is indispensable for the transcriptional apparatus condensates formation with coactivator BRD4/lineage-specifying transcription factor (TF) PU.1 at Nfatc1 super-enhancer during safeguarding the OC fate canalization. Besides, the antagonist function between ARID1A-cBAF and BRD9-ncBAF complex during osteoclastogenesis has been validated with in vitro assay and compound mutant mouse model. Furthermore, the antagonistic function of ARID1A-"accelerator" and BRD9-"brake" both depend on coactivator BRD4-"clutch" during osteoclastogenesis. Overall, these results uncover sophisticated cooperation between chromatin remodeler ARID1A, coactivator, and lineage-specifying TF at super-enhancer of lineage master TF in a condensate manner, and antagonist between distinct BAF complexes in the proper and balanced cell fate canalization.
Asunto(s)
Diferenciación Celular , Linaje de la Célula , Proteínas de Unión al ADN , Osteoclastos , Osteogénesis , Factores de Transcripción , Animales , Factores de Transcripción/metabolismo , Factores de Transcripción/genética , Osteoclastos/metabolismo , Osteoclastos/citología , Proteínas de Unión al ADN/metabolismo , Proteínas de Unión al ADN/genética , Ratones , Osteogénesis/genética , Osteogénesis/fisiología , Factores de Transcripción NFATC/metabolismo , Factores de Transcripción NFATC/genética , Ensamble y Desensamble de Cromatina , Regulación de la Expresión Génica , Ratones Endogámicos C57BL , Proliferación Celular , Análisis de la Célula Individual , Proteínas que Contienen Bromodominio , Proteínas NuclearesRESUMEN
In oncological nanomedicine, overcoming the dual-phase high interstitial pressure in the tumor microenvironment is pivotal for enhancing the penetration and efficacy of nanotherapeutics. The elevated tumor interstitial solid pressure (TISP) is largely attributed to the overaccumulation of collagen in the extracellular matrix, while the increased tumor interstitial fluid pressure (TIFP) stems from the accumulation of fluid due to the aberrant vascular architecture. In this context, metal-organic frameworks (MOFs) with catalytic efficiency have shown potential in degrading tumor interstitial components, thereby reducing interstitial pressure. However, the potential biotoxicity of the organic components of MOFs limits their clinical translation. To circumvent this, a MOF-like photocatalytic nanozyme, RPC@M, using naturally derived cobalt phytate (CoPA) and resveratrol (Res) is developed. This nanozyme not only facilitates the decomposition of water in the tumor interstitium under photoactivation to reduce TIFP, but also generates an abundance of reactive oxygen species through its peroxidase-like activity to exert cytotoxic effects on tumor cells. Moreover, Res contributes to the reduction of collagen deposition, thereby lowering TISP. The concurrent diminution of both TISP and TIFP by RPC@M leads to enhanced tumor penetration and potent antitumor activity, presenting an innovative approach in constructing tumor therapeutic nanozymes from natural products.
RESUMEN
Bone has the capacity to regenerate itself for relatively small defects; however, this regenerative capacity is diminished in critical-size bone defects. The development of synthetic materials has risen as a distinct strategy to address this challenge. Effective synthetic materials to have emerged in recent years are bioceramic implants, which are biocompatible and highly bioactive. Yet nothing suitable for the repair of large bone defects has made the transition from laboratory to clinic. The clinical success of bioceramics has been shown to depend not only on the scaffold's intrinsic material properties but also on its internal porous geometry. This study aimed to systematically explore the implications of varying channel size, shape, and curvature in tissue scaffolds on in vivo bone regeneration outcomes. 3D printed bioceramic scaffolds with varying channel sizes (0.3 mm to 1.5 mm), shapes (circular vs rectangular), and curvatures (concave vs convex) were implanted in rabbit femoral defects for 8 weeks, followed by histological evaluation. We demonstrated that circular channel sizes of around 0.9 mm diameter significantly enhanced bone formation, compared to channel with diameters of 0.3 mm and 1.5 mm. Interestingly, varying channel shapes (rectangular vs circular) had no significant effect on the volume of newly formed bone. Furthermore, the present study systematically demonstrated the beneficial effect of concave surfaces on bone tissue growth in vivo, reinforcing previous in silico and in vitro findings. This study demonstrates that optimizing architectural configurations within ceramic scaffolds is crucial in enhancing bone regeneration outcomes. STATEMENT OF SIGNIFICANCE: Despite the explosion of work on developing synthetic scaffolds to repair bone defects, the amount of new bone formed by scaffolds in vivo remains suboptimal. Recent studies have illuminated the pivotal role of scaffolds' internal architecture in osteogenesis. However, these investigations have mostly remained confined to in silico and in vitro experiments. Among the in vivo studies conducted, there has been a lack of systematic analysis of individual architectural features. Herein, we utilized bioceramic 3D printing to conduct a systematic exploration of the effects of channel size, shape, and curvature on bone formation in vivo. Our results demonstrate the significant influence of channel size and curvature on in vivo outcomes. These findings provide invaluable insights into the design of more effective bone scaffolds.
Asunto(s)
Cerámica , Osteogénesis , Andamios del Tejido , Impresión Tridimensional , Cerámica/química , Andamios del Tejido/química , Andamios del Tejido/normas , Osteogénesis/fisiología , Animales , Conejos , Masculino , Propiedades de SuperficieRESUMEN
Osteoporosis is a prevalent metabolic bone disease. While drug therapy is essential to prevent bone loss in osteoporotic patients, current treatments are limited by side effects and high costs, necessitating the development of more effective and safer targeted therapies. Utilizing a zebrafish ( Danio rerio) larval model of osteoporosis, we explored the influence of the metabolite spermine on bone homeostasis. Results showed that spermine exhibited dual activity in osteoporotic zebrafish larvae by increasing bone formation and decreasing bone resorption. Spermine not only demonstrated excellent biosafety but also mitigated prednisolone-induced embryonic neurotoxicity and cardiotoxicity. Notably, spermine showcased protective attributes in the nervous systems of both zebrafish embryos and larvae. At the molecular level, Rac1 was identified as playing a pivotal role in mediating the anti-osteoporotic effects of spermine, with P53 potentially acting downstream of Rac1. These findings were confirmed using mouse ( Mus musculus) models, in which spermine not only ameliorated osteoporosis but also promoted bone formation and mineralization under healthy conditions, suggesting strong potential as a bone-strengthening agent. This study underscores the beneficial role of spermine in osteoporotic bone homeostasis and skeletal system development, highlighting pivotal molecular mediators. Given their efficacy and safety, human endogenous metabolites like spermine are promising candidates for new anti-osteoporotic drug development and daily bone-fortifying agents.
Asunto(s)
Osteoporosis , Enfermedades de los Roedores , Humanos , Ratones , Animales , Pez Cebra , Espermina/uso terapéutico , Osteoporosis/tratamiento farmacológico , Osteoporosis/metabolismo , Osteoporosis/prevención & control , Osteoporosis/veterinaria , Prednisolona/efectos adversos , Glucocorticoides , Enfermedades de los Roedores/inducido químicamente , Enfermedades de los Roedores/tratamiento farmacológicoRESUMEN
It remains an obstacle to induce the regeneration of hard dentin tissue in clinical settings. To overcome this, a P(VDF-TrFE) piezoelectric film with 2 wt% SrCl2 addition is designed. The biofilm shows a high flexibility, a harmonious biocompatibility, and a large piezoelectric d33 coefficient of 14 pC N-1, all contributing to building an electric microenvironment that favor the recruitment of dental pulp stem cells (DPSCs) and their differentiation into odontoblasts during normal chewing, speaking, etc. On the other hand, the strontium ions can be gradually released from the film, thus promoting DPSC odonto-differentiation. In vivo experiments also demonstrate that the film induces the release of dentin minerals and regeneration of dentin tissue. In the large animal dentin defect models, this piezoelectric film induces in situ dentin tissue formation effectively over a period of three months. This study illustrates a therapeutic potential of the piezoelectric film to improve dentin tissue repair in clinical settings.
Asunto(s)
Biopelículas , Pulpa Dental , Dentina , Regeneración , Células Madre , Estroncio , Dentina/química , Biopelículas/efectos de los fármacos , Pulpa Dental/citología , Estroncio/química , Estroncio/farmacología , Animales , Humanos , Regeneración/efectos de los fármacos , Células Madre/citología , Células Madre/efectos de los fármacos , Diferenciación Celular/efectos de los fármacos , Odontoblastos/citología , Odontoblastos/efectos de los fármacos , Odontoblastos/metabolismo , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacologíaRESUMEN
The regeneration of bone defects in diabetic patients still faces challenges, as the intrinsic healing process is impaired by hyperglycemia. Inspired by the discovery that the endoplasmic reticulum (ER) is in a state of excessive stress and dysfunction under hyperglycemia, leading to osteogenic disorder, a novel engineered exosome is proposed to modulate ER homeostasis for restoring the function of mesenchymal stem cells (MSCs). The results indicate that the constructed engineered exosomes efficiently regulate ER homeostasis and dramatically facilitate the function of MSCs in the hyperglycemic niche. Additionally, the underlying therapeutic mechanism of exosomes is elucidated. The results reveal that exosomes can directly provide recipient cells with SHP2 for the activation of mitophagy and elimination of mtROS, which is the immediate cause of ER dysfunction. To maximize the therapeutic effect of engineered exosomes, a high-performance hydrogel with self-healing, bioadhesive, and exosome-conjugating properties is applied to encapsulate the engineered exosomes for in vivo application. In vivo, evaluation in diabetic bone defect repair models demonstrates that the engineered exosomes delivering hydrogel system intensively enhance osteogenesis. These findings provide crucial insight into the design and biological mechanism of ER homeostasis-based tissue-engineering strategies for diabetic bone regeneration.
Asunto(s)
Regeneración Ósea , Retículo Endoplásmico , Exosomas , Homeostasis , Hidrogeles , Células Madre Mesenquimatosas , Exosomas/metabolismo , Regeneración Ósea/fisiología , Regeneración Ósea/genética , Animales , Homeostasis/fisiología , Hidrogeles/química , Ratones , Retículo Endoplásmico/metabolismo , Células Madre Mesenquimatosas/metabolismo , Diabetes Mellitus Experimental/terapia , Diabetes Mellitus Experimental/metabolismo , Osteogénesis/fisiología , Modelos Animales de Enfermedad , Ingeniería de Tejidos/métodos , Masculino , HumanosRESUMEN
Caries is one of the most prevalent human diseases, resulting from demineralization of tooth hard tissue caused by acids produced from bacteria, and can progress to pulpal inflammation. Filling restoration with dental resin composites (DRCs) is currently the most common treatment for caries. However, existing DRCs suffer from low fracture strength and lack comprehensive anti-caries bioactivity including remineralization, pulp protection, and anti-cariogenic bacteria effects. In this study, inspired by plant roots' ability to stabilize and improve soil, fluorinated urchin-like hydroxyapatite (FUHA) with a three-dimensional whisker structure and bioactive components of calcium, phosphorus, and fluorine was designed and synthesized by a dynamic self-assembly method. Furthermore, versatile FUHA particles with different loading fractions were used as functional fillers to fabricate methacrylate-based DRCs, where the urchin-like hydroxyapatite (UHA) filled DRCs and commercial DRCs (Z350XT and BEAUTIFIL II) served as the control groups. The results demonstrated that FUHA with 50 wt% loading in resin matrix endowed DRC (F5) with excellent physicochemical properties, dentin remineralization property, cell viability, promotion of dental pulp stem cells mineralization, and antibacterial properties. Meanwhile, F5 also presented good clinical handling and aesthetic characteristics. Therefore, structure/functional-integrated FUHA filled DRCs have potential as a promising strategy for tooth restoration and anti-caries bioactivity.
RESUMEN
The healing process of critical-sized bone defects urges for a suitable biomineralization environment. However, the unsatisfying repair outcome usually results from a disturbed intricate milieu and the lack of in situ mineralization resources. In this work, we have developed a composite hydrogel that mimics the natural bone healing processes and serves as a seedbed for bone regeneration. The oxidized silk fibroin and fibrin are incorporated as rigid geogrids, and amorphous calcium phosphate (ACP) and platelet-rich plasma serve as the fertilizers and loam, respectively. Encouragingly, the seedbed hydrogel demonstrates excellent mechanical and biomineralization properties as a stable scaffold and promotes vascularized bone regeneration in vivo. Additionally, the seedbed serves a succinate-like function via the PI3K-Akt signaling pathway and subsequently orchestrates the mitochondrial calcium uptake, further converting the exogenous ACP into endogenous ACP. Additionally, the seedbed hydrogel realizes the succession of calcium resources and promotes the evolution of the biotemplate from fibrin to collagen. Therefore, our work has established a novel silk-based hydrogel that functions as an in-situ biomineralization seedbed, providing a new insight for critical-sized bone defect regeneration.
RESUMEN
BACKGROUND: Periodontitis is closely associated with chronic systemic diseases. Healthy lifestyle interventions have health-enhancing effects on chronic systemic disorders and periodontitis, but the extent to which healthy lifestyle combinations are associated with periodontitis is unclear. Therefore, this study aimed to investigate the association between periodontitis and different healthy lifestyle combinations. METHODS: 5611 participants were included from the National Health and Nutrition Examination Survey (NHANES, 2009-2014). Six healthy lifestyles factors were defined as fulfilling either: non-smoking, moderate drinking, moderate body mass index (BMI), physical activity, healthy sleep and appropriate total energy intake. Then, the adjusted logistic regression models were performed to identify the association between the periodontitis and the scoring system composed of six lifestyles (0-6 scale). Finally, different scenarios were dynamically and randomly combined to identify the optimal and personalized combination mode. RESULTS: Higher healthy lifestyle scores were significantly associated with lower periodontitis prevalence (p < 0.05). Four lifestyle factors (smoking, drinking, BMI, and sleep) significantly varied between the periodontitis and healthy groups (p < 0.05). Smoking was considered as a strong independent risk factor for periodontitis in both former and current smokers. Results further indicated that the combination of these four lifestyles played the most essential role in determining the magnitude of periodontitis occurrence (odds ratio [OR]: 0.33; 95% confidence interval [CI]: 0.21 to 0.50). In the total population, the majority of three lifestyle combinations outperformed the two combination models, whereas the two-combination of nonsmoking-drinking (OR: 0.39; 95% CI: 0.27 to 0.58) had relatively lower periodontitis prevalence than the three-combination of healthy drinking-BMI-sleep (OR: 0.42; 95% CI: 0.26 to 0.66). CONCLUSION: This cross-sectional study suggests that smoking, drinking, BMI, and sleep are significantly related with periodontitis and smoking is the principal risk factor related among them. This study provides various customized lifestyle combinations for periodontitis prevention.
Asunto(s)
Periodontitis , Humanos , Encuestas Nutricionales , Estudios Transversales , Periodontitis/epidemiología , Factores de Riesgo , Estilo de Vida Saludable , Enfermedad CrónicaRESUMEN
The practical efficacy of nanomedicines for treating solid tumors is frequently low, predominantly due to the elevated interstitial pressure within such tumors that obstructs the penetration of nanomedicines. This increased interstitial pressure originates from both liquid and solid stresses related to an undeveloped vascular network and excessive fibroblast proliferation. To specifically resolve the penetration issues of nanomedicines for tumor treatment, this study introduces a holistic "dual-faceted" approach. A treatment platform predicated on the WS2/Pt Schottky heterojunction was adopted, and flexocatalysis technology was used to disintegrate tumor interstitial fluids, thus producing oxygen and reactive oxygen species and effectively mitigating the interstitial fluid pressure. The chemotherapeutic agent curcumin was incorporated to further suppress the activity of cancer-associated fibroblasts, minimize collagen deposition in the extracellular matrix, and alleviate solid stress. Nanomedicines achieve homologous targeting by enveloping the tumor cell membrane. It was found that this multidimensional strategy not only alleviated the high-pressure milieu of the tumor interstitiumâwhich enhanced the efficiency of nanomedicine deliveryâbut also triggered tumor cell apoptosis via the generated reactive oxygen species and modulated the tumor microenvironment. This, in turn, amplified immune responses, substantially optimizing the therapeutic impacts of nanomedicines.
RESUMEN
Senile wound healing risks a variety of health complications and makes both economic and psychological burdens on patients greatly. Poor activity of aged dermal fibroblasts (A-FBs) and local disordered immunoreaction in the deep dermis contribute to delayed wound healing. Therefore, the locally complex microenvironment in deep requires additional processing. Herein, a novel double-layer hyaluronic acid methacrylate (HAMA)/polyvinyl alcohol (PVA) microneedle patch (MNP) coated by young fibroblast-derived exosomes (Y-EXOs) (Y-EXOs@HAMA/PVA MNP) is presented for deep drug delivery, aged wound healing and immunoregulation. A spraying and freeze-drying method is applied for keeping the bioactivity of the nanovesicles. An ideal loading of Y-EXOs and enhanced strength for penetration have realized after circulation for times. The Y-EXOs@HAMA/PVA MNP shows an excellent influence on delayed wound healing of aged skin with active A-FBs, more deposition of collagen and less production of IL-17A compared with application of aged fibroblast-derived exosomes (A-EXOs). Moreover, the content microRNAs in Y-EXOs and A-EXOs are sequenced for further study. This study initiatively demonstrates that Y-EXOs have effective function on both anti-aging and anti-inflammation and Y-EXOs@HAMA/PVA MNP is expected as a novel strategy for deep drug delivery for promoting hard wound healing in aged skin in future clinical application.
Asunto(s)
Exosomas , Fibroblastos , Agujas , Piel , Cicatrización de Heridas , Cicatrización de Heridas/efectos de los fármacos , Exosomas/metabolismo , Exosomas/química , Animales , Fibroblastos/metabolismo , Humanos , Piel/metabolismo , Inmunoterapia/métodos , Ácido Hialurónico/química , Regeneración/efectos de los fármacos , Ratones , Alcohol Polivinílico/química , Masculino , Envejecimiento de la Piel/efectos de los fármacos , MicroARNs/metabolismoRESUMEN
Precision drug delivery and multimodal synergistic therapy are crucial in treating diverse ailments, such as cancer, tissue damage, and degenerative diseases. Electrodes that emit electric pulses have proven effective in enhancing molecule release and permeability in drug delivery systems. Moreover, the physiological electrical microenvironment plays a vital role in regulating biological functions and triggering action potentials in neural and muscular tissues. Due to their unique noncentrosymmetric structures, many 2D materials exhibit outstanding piezoelectric performance, generating positive and negative charges under mechanical forces. This ability facilitates precise drug targeting and ensures high stimulus responsiveness, thereby controlling cellular destinies. Additionally, the abundant active sites within piezoelectric 2D materials facilitate efficient catalysis through piezochemical coupling, offering multimodal synergistic therapeutic strategies. However, the full potential of piezoelectric 2D nanomaterials in drug delivery system design remains underexplored due to research gaps. In this context, the current applications of piezoelectric 2D materials in disease management are summarized in this review, and the development of drug delivery systems influenced by these materials is forecast.
Asunto(s)
Nanoestructuras , Nanoestructuras/uso terapéutico , Nanoestructuras/química , Electricidad , Fenómenos Mecánicos , Sistemas de Liberación de MedicamentosRESUMEN
OBJECTIVES: This study has developed and optimized a machine learning model to accurately predict the final colors of CAD-CAM ceramics and determine their required minimum thicknesses to cover different clinical backgrounds. METHODS: A total of 120 ceramic specimens (2 mm, 1 mm and 0.5 mm thickness; n = 10) of four CAD-CAM ceramics - IPS e.max, IPS ZirCAD, Upcera Li CAD and Upcera TT CAD - were studied. The CIELab coordinates (L*, a* and b*) of each specimen were obtained over seven different clinical backgrounds (A1, A2, A3.5, ND2, ND7, cobalt-chromium alloy (CC) and medium precious alloy (MPA)) using a digital spectrophotometer. The color difference (ΔE) and lightness difference (ΔL) results were submitted to 39 different models. The prediction results from the top-performing models were used to develop a fusion model via the Stacking integrated learning method for best-fitting prediction. The SHapley Additive exPlanation (SHAP) was performed to interpret the feature importance. RESULTS: The fusion model, which combined the ExtraTreesRegressor (ET) and XGBRegressor (XGB) models, demonstrated minimal prediction errors (R2 = 0.9) in the external testing sets. Among the investigated variables, thickness and background colors (CC and MPA) majorly influenced the final color of restoration. To achieve perfect aesthetic restoration (ΔE<2.6), at least 1.9 mm IPS ZirCAD or 1.6 mm Upcera TT CAD were required to cover the CC background, while two tested glass-ceramics did not meet the requirements even with thicknesses over 2 mm. SIGNIFICANCE: The fusion model provided a promising tool for automate decision-making in material selection with minimal thickness over various clinical background.
Asunto(s)
Cerámica , Porcelana Dental , Color , Diseño Asistido por Computadora , Aleaciones de Cromo , Ensayo de Materiales , Propiedades de SuperficieRESUMEN
@#The problems caused by proximal contact loss (PCL) of dental implants have been a mainstream research topic in recent years, and scholars are unanimously committed to analyzing their causes and related factors, aiming to identify solutions to the problems related to PCL. The effects of the anterior component of force (ACF), the lifelong remolding of the adult craniofacial jaw and alveolar socket, and the osseointegration characteristics of dental implants are the main causes of PCL. On the one hand, the closing movement of the mandible causes the ACF of the tooth to move through the posterior molar cusp. Moreover, drifting between the upper and lower posterior teeth and mandibular anterior teeth can cause the anterior teeth of the upper and lower jaws to be displaced labially. On the other hand, reconstruction of the jaw, alveolar socket and tooth root, the forward horizontal force of the masticatory muscles, the dynamic component of the jaw and the forward force generated by the oblique plane of the tooth cusp can cause the natural tooth to experience near-middle drift. Additionally, natural teeth can shift horizontally and vertically and rotate to accommodate remodeling of the stomatognathic system and maintain oral function. Nevertheless, the lack of a natural periodontal membrane during implant osseointegration, the lack of a physiological basis for near-medium drift, the small average degree of vertical motion and the integrated silence of dental implants without the overall drift characteristics of natural teeth increases the probability of PCL. The high incidence of PCL is clearly associated with the duration of prosthesis delivery and the mesial position; but it is also affected by the magnitude of the bite force, occlusion, the adjacent teeth, restoration design, implant location, jaw, and patient age and sex. PCL has shown a significant correlation with food impaction, but not a one-to-one correspondence, and did not meet the necessary and sufficient conditions. PCL is also associated with peri-implant lesions as well as dental caries. PCL prevention included informed consent, regular examinations, selection of retention options, point of contact enhancement, occlusal splints, and the application of multipurpose digital crowns. Management of the PCL includes adjacent contact point additions, orthodontic traction, and occlusal adjustment. Existing methods can solve the problem of food impaction in the short term with comprehensive intervention to seek stable, long-term effects. Symmetric and balanced considerations will expand the treatment of issues caused by PCL.
RESUMEN
Introduction: Microbiota and their interaction with hosts have been of great interest in brain research in recent years. However, the role of oral microbiota in mental illness and the underlying mechanism of oral-brain communication remains elusive. Sleep bruxism (SB) is an oral parafunctional activity related to the nervous system and is considered a risk factor for harmful clinical consequences and severe systemic conditions. Exploring the connection between oral microbiota and sleep bruxism may deepen our understanding of the complex relationship between oral-brain axis and provide insights for treatment. Methods: In this study, salivary samples were collected from 22 individuals with SB and 21 healthy controls, and metagenomics with metabolomics was performed. Nonparametric Wilcoxon test were applied for the statistical analysis between the two groups. Microbial dysbiosis and altered oral metabolites were found in the SB individuals. Results: The characteristic metabolite N-acetylglucosamine (GlcNAc) (VIP=8.4823, P<0.05) was correlated to a statistically lower Streptococcus mitis level in SB individuals. Salivary IFN-g level and IFN-g/IL-4 ratio were detected with significant changes in a chip assay. Amino acid metabolism pathways were upregulated, and the pathway with the largest number of differentially expressed genes is related to amino-tRNA charging pathway, while the most significantly enriched pathway is related to arginine biosynthesis. Neurotransmitter-associated pathways with glutamatergic and GABAergic synapses and cardiovascular system-related pathways were enriched in the SB group. Discussion: These results indicate a possible neuroimmune regulatory network of oral-brain communication in SB, which helps explain the mechanism of the oral microbiome with the host in sleep bruxers and provides a reference for early clinical and therapeutic intervention to improve the diagnosis and treatment of SB and similar diseases.
Asunto(s)
Bruxismo del Sueño , Humanos , Bruxismo del Sueño/complicaciones , Bruxismo del Sueño/diagnóstico , Sueño , Encéfalo/metabolismo , Factores de RiesgoRESUMEN
The filler/resin matrix interface interaction plays a vital role in the properties of dental resin composites (DRCs). Porous particles are promising fillers due to their potential in constructing micromechanical interlocking at filler/resin matrix interfaces, therefore improving the properties of the resulting DRCs, where the pore size is significantly important. However, how to control the pore size of porous particles via a simple synthesis method is still a challenge, and how their pore sizes affect the properties of resulting DRCs has not been studied. In this study, porous silica (DPS) with a dendritic structure and an adjustable pore size was synthesized by changing the amounts of catalyst in the initial microemulsion. These synthesized DPS particles were directly used as unimodal fillers and mixed with a resin matrix to formulate DRCs. The results showed that the DPS pore size affects the properties of DRCs, especially the mechanical property. Among various DPS particles with different pore sizes, DPS6 resulted in 19.5% and 31.4% improvement in flexural strength, and 24.4% and 30.7% enhancement in compression strength, respectively, compared to DPS1 and DPS9. These DPS particles could help to design novel dental restorative materials and have promising applications in biomedicine, catalysis, and adsorption.
Asunto(s)
Excipientes , Dióxido de Silicio , Porosidad , Adsorción , Catálisis , Resinas SintéticasRESUMEN
As societal aging intensifies, senile osteoporosis has become a global public health concern. Bone microdamage is mainly caused by processes such as enhancing osteoclast activity or reducing bone formation by osteoblast-lineage cells. Compared with young individuals, extracellular vesicles derived from senescent bone marrow mesenchymal stem cells(BMSCs) increase the transient differentiation of bone marrow monocytes (BMMs) to osteoclasts, ultimately leading to osteoporosis and metal implant failure. To address this daunting problem, an exosome-targeted orthopedic implant composed of a nutrient coating was developed. A high-zinc atmosphere used as a local microenvironmental cue not only could inhibit the bone resorption by inhibiting osteoclasts but also could induce the reprogramming of senile osteogenesis and osteoclast dialogue by exosome modification. Bidirectional regulation of intercellular communication via cargoes, including microRNAs carried by exosomes, was detected. Loss- and gain-of-function experiments demonstrated that the key regulator miR-146b-5p regulates the protein kinase B/mammalian target of rapamycin pathway by targeting the catalytic subunit gene of PI3K-PIK3CB. In vivo evaluation using a naturally-aged osteoporotic rat femoral defect model further confirmed that a nutrient coating substantially augments cancellous bone remodeling and osseointegration by regulating local BMMs differentiation. Altogether, this study not only reveals the close link between senescent stem cell communication and age-related osteoporosis but also provides a novel orthopedic implant for elderly patients with exosome modulation capability.
Asunto(s)
Exosomas , Osteoclastos , Anciano , Humanos , Animales , Ratas , Osteogénesis , Zinc , Envejecimiento , MamíferosRESUMEN
A novel technique of digitally printed custom trays assembled with occlusion rims and gothic arch tracing devices attached with tenon-and-mortise joints for biofunctional complete dentures that could be delivered in 2 visits is presented. This technique takes advantage of closed-mouth impressions and objective jaw relation records by following the biofunctional prosthetic system concept with high efficiency and reduced labor.