The CO2 electrolysing mechanism in single-phase mixed-conducting cathode of solid oxide cell.

In the field of solid oxide cells (SOC), unveiling the electrochemical reaction and transfer mechanisms in mixed ionic and electronic conducting (MIEC) electrodes is of great importance. Due to the chemical capacitance effects of MIEC materials, SOC often shows large capacitance current during electrochemical tests, which might interfere with the polarization behaviors. This work presents a numerical multiphysical model based on the transport of oxygen species, which accurately and concisely replicates the current-voltage curves of a solid oxide electrolysis cell (SOEC) with MIEC electrodes under various scanning rates. The scanning IV and electrochemical impedance spectra measurement under different SOEC working conditions are combined to enable the separation of Faradic and charging currents. Thus, both the bulk diffusion and surface gaseous diffusion of the oxygen species are encompassed, which explains how the current being generated due to intertwined chemical capacitance effects and chemical reactions in the MIEC electrodes.

Nifedipine-Influenced Enlargement of the Masticatory Mucosa in an Elderly Edentulous Patient: A Rare Case Report with a Two-Year Follow-Up.

Drug-influenced gingival enlargement is a common side effect associated with certain medications, particularly calcium channel blockers like nifedipine, which has been extensively documented. However, the occurrence of nifedipine-influenced masticatory mucosa overgrowth in edentulous patients is rare. Here, we present a case of nifedipine-influenced mucosal enlargement persisting in a 67-year-old edentulous patient 3 months after the extraction of all his teeth. The patient underwent flap surgery and alveoloplasty to excise the overgrown tissue, followed by complete denture restoration. The antihypertensive medication was replaced with valsartan. A 2-year follow-up revealed no recurrence of overgrowth, indicating the effectiveness of this management strategy for such clinical situation.

Fe-Doped Ceria-Based Ceramic Cathode for High-Efficiency CO2 Electrolysis in Solid Oxide Electrolysis Cell.

In the quest for sustainable energy solutions, solid oxide electrolysis cell (SOEC) emerges as a key technology for converting CO2 into fuels and valuable chemicals. This work focuses on pure ceramic Fex Sm0.2 Ce0.8 O2- δ (xFe-SDC) as the fuel electrodes, and Sr-free ceria-based ceramic electrodes can be successfully constructed for x ≤ 0.05. The incorporation of Fe into the ceria lattice increases the oxygen vacancy concentration and promotes the formation of catalytic sites crucial for the CO2 reduction reaction (CO2 RR). Density functional theory calculations indicate that Fe enhances electrochemical performance by decreasing the CO2 RR energy barrier and facilitating oxygen ion diffusion. At 800 °C and 1.5 V, single cells with 0.05Fe-SDC cathodes manifest attractive performance, attaining current densities of -1.98 and -2.26 A cm-2 under 50% CO2 /CO and pure CO2 atmospheres, respectively. These results suggest the great potential of xFe-SDC electrodes as promising avenues for high-performance fuel electrodes in SOEC.

Fe-Doped SDC Solid Solution as an Electrolyte for Low-to-Intermediate-Temperature Solid Oxide Fuel Cells.

Ceria-based oxides, such as samaria-doped ceria (SDC), are potential electrolytes for low-to-intermediate-temperature solid oxide fuel cells (SOFCs). The sinterability of these materials can be improved by adding iron as the sintering aid. This work reveals that Fe is soluble in SDC, forming an Fe-doped SDC solid solution. It is found that the solubility is affected by the sintering temperature. Fe doping has obvious effects on electrolyte properties, including sintering characteristics, thermal expansion behaviors, and electrical conductivities in both air and hydrogen atmospheres. The conductivity obviously increases while the activation energy decreases by doping Fe. Compared with that of the bare SDC electrolyte, the performance of the single cell with the Fe-doped SDC is enhanced; for example, the peak power density is increased by 52.8% to 0.726 W cm-2 at 600 °C when humidified hydrogen is used as the fuel and ambient air is used as the oxidant. The single cell showed stable operation at 600 °C under a constant current density of 0.3 A cm-2 for 150 h. Therefore, the Fe-doped SDC solid solution shows promise as a potential electrolyte for low-to-intermediate-temperature SOFCs.

A novel concentrated growth factor (CGF) and bio-oss based strategy for second molar protection after impacted mandibular third molar extraction: a randomized controlled clinical study.

BACKGROUND: The extraction of impacted mandibular third molars might cause large bone defects in the distal area of second molars. A new strategy was innovatively employed here combining autologous bone, Bio-Oss, concentrated growth factors (CGF) gel and CGF membrane for bone repair, and the present study aimed at exploring safety as well as short- and long-term efficacy of this new protocol clinically. MATERIALS AND METHODS: A total of 66 participants were enrolled in this randomized single-blind clinical trial, and randomly allocated to control group (only blood clots), test A group (autogenous bone, Bio-Oss with barrier membrane) and test B group (autogenous bone, Bio-Oss, CGF gel with CGF membrane). The postoperative outcomes including PoSSe scale, periodontal probing depth (PD), degree of gingival recession and computed tomography measurements were assessed at 3rd, 6th, 12th month. A p-value < 0.05 was considered statistically significant. RESULTS: In PoSSe scale, no significant difference was observed except a significant alleviation of early-stage pain perception in test B group (p < 0.05). Also, test B group exhibited better effect on periodontal healing and gingival recession reduction after 6 months (p < 0.05). Both two test groups showed more new bone formation than the control group (p < 0.05). It is noteworthy that the bone repair of test B group was significantly better than that of test A at 3rd and 6th month (p < 0.05), yet no difference was observed at 12th month (p > 0.05). CONCLUSION: Both two test groups could achieve stable long-term efficacy on bone defect repair. The use of CGF gel and CGF membrane could accelerate early-stage bone repair, alleviate short-term pain after surgery, reduce long-term probing depth and relieve economic cost for patients. This new bone repair protocol is worthy of promoting by clinicians. TRIAL REGISTRATION: This study was registered with the identification number ChiCTR2300068466 on 20/02/2023 at Chinese Clinical Trial Registry. Also, it was ethically approved from the institutional ethics committee at the Tongren Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, China (No:2023-010-01), and has been conducted in accordance to the guidelines of the declaration of Helsinki. Written informed consent was obtained from all participants in the study.

Perspective on high-temperature surface oxygen exchange in a porous mixed ionic-electronic conductor for solid oxide cells.

The surface exchange coefficient (k) of porous mixed ionic-electronic conductors (MIECs) determines the device-level electrochemical performance of solid oxide cells. However, a great difference is reported for k values, which are measured using presently available technologies of electrical conductivity relaxation (ECR), electrochemical impedance spectroscopy (EIS), and oxygen isotope exchange (OIE). In terms of this issue, this perspective paper estimates the possible physiochemical processes for the oxygen reduction reaction (ORR) in porous MIECs by comparing the oxygen supply/consumption fluxes through calculation. Then, the potential problems associated with ECR, EIS, and OIE for application in porous materials are discussed regarding theory, assumptions, sample requirements, and data processing. Finally, gas diffusion effects are revealed by comparing the simulated and measured ECR profiles, which show that the ORR process can be significantly delayed by gas diffusion. This perspective aims to recommend a reasonable method to characterize the true ORR kinetics of porous electrodes and quantify the effect of gas diffusion.

Perovskite Oxyfluoride Ceramic with In Situ Exsolved Ni-Fe Nanoparticles for Direct CO2 Electrolysis in Solid Oxide Electrolysis Cells.

Solid oxide electrolysis cell (SOEC) is a potential technique to efficiently convert CO2 greenhouse gas into valuable fuels. Thus, there is significant interest in developing highly active and stable electrocatalysts for the CO2 reduction reaction (CO2RR). Herein, a Ni and F co-doping strategy is proposed to facilitate the exsolution reaction and form a new cathode, Ni-Fe alloy nanoparticles embedded in ceramic Sr2Fe1.5Mo0.5O6-δ (SFM) doped with fluorine. F-doping and Ni-Fe exsolution enhance CO2 adsorption by a factor of 2.4 and increase the surface reaction rate constant (kchem) for CO2RR from 6.79 × 10-5 to 18.1 × 10-5 cm s-1, as well as the oxygen chemical bulk diffusion coefficient (Dchem) from 9.42 × 10-6 to 19.1 × 10-6 cm2 s-1 at 800 °C. Meanwhile, the interfacial polarization resistance (Rp) decreases by 52%, from 0.64 to 0.31 Ω cm2. At 800 °C and 1.5 V, an extremely high current density of 2.66 A cm-2 and a stability test over 140 h are achieved for direct CO2 electrolysis in the SOEC.

Magnetic-assisted laparoscopic liver transplantation in swine.

BACKGROUND: Although laparoscopic technology has achieved rapid development in the surgical field, it has not been applied to liver transplantation, primarily because of difficulties associated with laparoscopic vascular anastomosis. In this study, we introduced a new magnetic-assisted vascular anastomosis technique and explored its application in laparoscopic liver transplantation in pigs. METHODS: Two sets of magnetic vascular anastomosis rings (MVARs) with different diameters were developed. One set was used for anastomosis of the suprahepatic vena cava (SHVC) and the other set was used for anastomosis of the infrahepatic vena cava (IHVC) and portal vein (PV). Six laparoscopic orthotopic liver transplantations were performed in pigs. Donor liver was obtained via open surgery. Hepatectomy was performed in the recipients through laparoscopic surgery. Anastomosis of the SHVC was performed using hand-assisted magnetic anastomosis, and the anastomosis of the IHVC and PV was performed by magnetic anastomosis with or without hand assistance. RESULTS: Liver transplants were successfully performed in five of the six cases. Postoperative ultrasonographic examination showed that the portal inflow was smooth. However, PV bending and blood flow obstruction occurred in one case because the MVARs were attached to each other. The durations of loading of MVAR in the laparoscope group and manual assistance group for IHVC and PV were 13 ± 5 vs. 5 ± 1 min (P < 0.01) and 10 ± 2 vs. 4 ± 1 min (P < 0.05), respectively. The durations of MVAR anastomosis in the laparoscope group and manual assistance group for IHVC and PV were 5 ± 1 vs. 1 ± 1 min (P < 0.01), and 5 ± 1 vs. 1 ± 1 min (P < 0.01), respectively. The anhepatic phase was 43 ± 4 min in the laparoscope group and 23 ± 2 min in the manual assistance group (P < 0.01). CONCLUSIONS: Our study showed that magnetic-assisted laparoscopic liver transplantation can be successfully carried out in pigs.

A cone-beam computed tomographic study evaluating the efficacy of incisor movement with clear aligners: Assessment of incisor pure tipping, controlled tipping, translation, and torque.

INTRODUCTION: This retrospective clinical study aimed to evaluate the efficacy of different types of incisor movements with clear aligners in the sagittal plane. METHODS: Pretreatment and posttreatment cone-beam computed tomography (CBCT) scans were collected from 69 patients who underwent nonextraction treatment with clear aligners (Invisalign; Align Technology, San Jose, Calif). Integrated 3-dimensional models of the virtual incisor position (ClinCheck; Align Technology) and the posttreatment incisor position (from posttreatment CBCT scans) were superimposed over the pretreatment position (from pretreatment CBCT scans) using Mimics software (Materialise, Leuven, Belgium). On the basis of the location of the rotation center, incisors showing pure tipping (>10°), controlled tipping (>10°), translation (>1 mm), or torque (>10°) movements were selected. Efficacy was determined by comparing the predicted and achieved incisor movement, and differences with efficacy were analyzed using Kruskal-Wallis and Shapiro-Wilk tests (α = 0.05). RESULTS: In measurements for 231 incisors, the mean efficacy of incisor movements in the sagittal plane was 55.58%. The most and least predictable movements were pure tipping (72.48%) and torque (35.21%), respectively. Labial root movement was significantly more predictable than lingual root movement, and labial movement of the mandibular incisors was significantly easier than that of the maxillary incisors. The type of tooth movement achieved was different from the type designed. CONCLUSIONS: The efficacy of incisor movement in the sagittal plane using clear aligners varies with designed movement type, and labial root movement appears to be more accurate than the lingual root movement. The biomechanics of clear aligners remains to be further elucidated to achieve more predictable treatment results.

Hydrogen Oxidation Pathway Over Ni-Ceria Electrode: Combined Study of DFT and Experiment.

Ni-ceria cermets are potential anodes for intermediate-temperature solid oxide fuel cells, thanks to the catalytic activity and mixed conductivities of ceria-based materials associated with the variable valence states of cerium. However, the anodic reaction mechanism in the Ni-ceria systems needs to be further revealed. Via density functional theory with strong correlated correction method, this work gains insight into reaction pathways of hydrogen oxidation on a model system of Ni10-CeO2(111). The calculation shows that electrons tend to be transferred from Ni10 cluster to cerium surface, creating surface oxygen vacancies. Six pathways are proposed considering different adsorption sites, and the interface pathway proceeding with hydrogen spillover is found to be the prevailing process, which includes a high adsorption energy of -1.859 eV and an energy barrier of 0.885 eV. The density functional theory (DFT) calculation results are verified through experimental measurements including electrical conductivity relaxation and temperature programmed desorption. The contribution of interface reaction to the total hydrogen oxidation reaction reaches up to 98%, and the formation of Ni-ceria interface by infiltrating Ni to porous ceria improves the electrochemical activity by 72% at 800°C.

Cyclic tensile strain promotes the osteogenic differentiation of a bone marrow stromal cell and vascular endothelial cell co-culture system.

Mechanical stimuli and neovascularization are closely coupled to osteogenic differentiation and new bone formation. The purpose of present study was to detect the effect of cyclic mechanical strain on a co-culture system of bone marrow stromal cells (BMSCs) and vascular endothelial cells (VECs) and to clarify the related mechanisms. Primary BMSCs and VECs were isolated from Sprague-Dawley rats and co-cultured at various ratios (1:0, 1:2, 1:4, 4:1, 2:1, 1:1, and 0:1). To determine optimized loading conditions, the cells were then subjected to various cyclic tensile strains (0%, 3%, 6% and 9%) using a Flexcell 5000 mechanical loading system. A protocol of 6% strain on the co-cultured cells at a 1:1 ratio was selected as the optimized culture conditions based on the best osteogenic effects, which included increased ALP activity, matrix mineralization and the expressions of VEGF, Runx-2 and Col-1. The VEGF-R inhibitor tivozanib was used to analyze the paracrine role of VEGF, and the osteogenesis-promoting effects of 6% tensile strain were abrogated in the co-cultured cells treated with tivozanib. These results demonstrate that cyclic tensile strain promotes osteogenic differentiation in BMSC/VEC co-culture systems, possibly via a VEC-mediated paracrine effect of VEGF on BMSCs.

[Clinical effect of premolar extraction with high torque self-locking appliances].

PURPOSE: To analyze the clinical effect of extraction correction of patients with maxillary protrusion by using Damon high torque appliances. METHODS: Forty patients with extraction of four first premolars due to orthodontic treatment were selected. They had protrusion of maxilla and were randomly divided into two groups. Both arches of Damon group were treated with Damon high torque appliances and MBT group were corrected with traditional MBT straight wire appliance; patients in two groups received sliding mechanics for adduction of upper anterior teeth. Cephalometric radiophotographs were analyzed before（T0）and after adduction of upper anterior teeth（T1）. The difference between the two groups was analyzed with SPSS15.0 software package. RESULTS: The upper incisors showed a more retruded position in the two groups at T1,although they showed a similar amount in both groups. The backward movement of upper lip was 2.31mm in Damon group, which was significantly less than that of 2.81mm in MBT group(P<0.05). No significant difference in the first molar mesialization was detected between Damon group(2.33 mm) and MBT group(2.36mm) (P>0.05). For anterior teeth retraction, nasolabial angle (NLA) in MBT and Damon group were 107.44°and 106.33°, increase of NLA in MBT group was 9.17°,which was significantly larger than that of 7.22°in Damon group (P<0.05). U1-MxP in MBT and Damon were 110.61°and 114.11°. U1-MxP decreased 12.06°in MBT group, while significant change was deteced in Damon group of 7.61°(P<0.05). CONCLUSIONS: Application of Damon high torque appliances in extraction treatment of maxillary protrusion patients yielded better control of the labial crown torque of anterior teeth, and avoided excessive lingual inclination of anterior teeth compared with MBT in adduction of upper anterior teeth.