RESUMEN
BACKGROUND: The Cabrol procedure has undergone various modifications and developments since its invention. However, there is a notable gap in the literature regarding meta-analyses assessing it. METHODS: A systematic review and meta-analysis was conducted to evaluate the effectiveness and long-term outcomes of the Cabrol procedure and its modifications. Pooling was conducted using random effects model. Outcome events were reported as linearized occurrence rates (percentage per patient-year) with 95% confidence intervals. RESULTS: A total of 14 studies involving 833 patients (mean age: 50.8 years; 68.0% male) were included in this meta-analysis. The pooled all-cause early mortality was 9.0% (66 patients), and the combined rate of reoperation due to bleeding was 4.9% (17 patients). During the average 4.4-year follow-up (3,727.3 patient-years), the annual occurrence rates (linearized) for complications were as follows: 3.63% (2.79-4.73) for late mortality, 0.64% (0.35-1.16) for aortic root reoperation, 0.57% (0.25-1.31) for hemorrhage events, 0.66% (0.16-2.74) for thromboembolism, 0.60% (0.29-1.26) for endocarditis, 2.32% (1.04-5.16) for major valve-related adverse events, and 0.58% (0.34-1.00) for Cabrol-related coronary graft complications. CONCLUSION: This systematic review provides evidence that the outcomes of the Cabrol procedure and its modifications are acceptable in terms of mortality, reoperation, anticoagulation, and valve-related complications, especially in Cabrol-related coronary graft complications. Notably, the majority of Cabrol procedures were performed in reoperations and complex cases. Furthermore, the design and anastomosis of the Dacron interposition graft for coronary reimplantation, considering natural anatomy and physiological hemodynamics, may promise future advancements in this field.
Asunto(s)
Reoperación , Humanos , Reoperación/estadística & datos numéricos , Complicaciones Posoperatorias/epidemiología , Implantación de Prótesis de Válvulas Cardíacas/métodos , Implantación de Prótesis de Válvulas Cardíacas/mortalidad , Implantación de Prótesis de Válvulas Cardíacas/efectos adversos , Resultado del TratamientoRESUMEN
Partially sintered 3 mol % yttria-stabilized tetragonal zirconium dioxide (ZrO(2), zirconia) polycrystal (3Y-TZP) ceramics are used in dental posterior restorations with computer-aided design-computer-aided manufacturing (CAD/CAM) techniques. High strength is acquired after sintering, but shape distortion of preshaped compacts during their sintering is inevitable. The aim of this study is to fabricate new machinable ceramic composites with strong mechanical properties that are fit for all-ceramic dental restorations. Aluminum oxide (Al(2)O(3))-coated 3Y-TZP powders were first prepared by the heterogeneous precipitation method starting with 3Y-TZP, Al(NO(3))(3) . 9H(2)O, and ammonia, then amorphous boron nitride (BN) was produced and the as-received composite powders were coated via in situ reaction with boric acid and urea. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were used to analyze the status of Al(2)O(3)-BN on the surface of the 3Y-TZP particles. TEM micrographs show an abundance of Al(2)O(3) particles and amorphous BN appearing uniformly on the surface of the 3Y-TZP particles after the coating process. The size of the Al(2)O(3) particles is about 20 nm. The XRD pattern shows clearly the peak of amorphous BN among the peaks of ZrO(2).
Asunto(s)
Óxido de Aluminio/química , Compuestos de Boro/química , Cerámica/química , Diseño Asistido por Computadora , Implantes Dentales , Nanopartículas del Metal/química , Itrio/química , Circonio/química , Materiales Biocompatibles/química , Microscopía Electrónica de Transmisión , Polvos , Difracción de Rayos XRESUMEN
Nano-diamond was synthesized by TNT/RDX explosives detonation in a steel chamber and characterized by X-ray diffraction (XRD), laser Raman spectroscopy, and infrared spectroscopy. XRD results indicate that nano-diamond has cubic diamond structure. The parameter of unit cell of nano-diamond is 0.359 23 nm and is 0.72% larger than that of the bulk diamond. The high-density defects and other impurity atoms in the nano-diamond structure may lead to the large lattice constant. The examination results of Raman spectra show that the Raman band is broader and shifts to l ow frequency by 3 cm(-1), because the size of nano-diamond reaches nanometer order. There is little graphite in the nano-diamond. There are two peaks in FTIR of the nano-diamond, which are characteristic peaks of diamond at 1 262 and 1 134 cm(-1). Besides these two peaks, there are six peaks at 3 422, 1 643, 2 971, 2 930, 2 857 and 1 788 cm(-1) respectively. The FTIR bands at 2 930 and 2 857 cm(-1) are the antisymmetrical and symmetrical stretch vibration absorption spectra of CH2 respectively. The 3 422 cm(-1) is the stretch vibration absorption peak of O-H. The 1 634 cm(-1) confirms that there are H2O in the nano-diamond. The 2 971 cm(-1) is the antisymmetrical stretch vibration absorption peak of CH3. The 1 788 cm(-1) is the stretch vibration absorption peak of C=O. These indicate that there are H and O elements in the nano-diamond. From the mechanism of the nano-diamond, the authors discuss the reason for the vibration absorption peaks of O-H, CH2, CH3, and C=O, existing in the FTIR of the nano-diamond.
Asunto(s)
Diamante/química , Sustancias Explosivas/química , Espectroscopía Infrarroja por Transformada de Fourier , Espectrometría Raman , Algoritmos , Cristalización , Nanoestructuras/química , Triazinas/química , Trinitrotolueno/química , Difracción de Rayos XRESUMEN
The nano-graphite powder synthesized by the detonation of explosives with negative oxygen balance is a new powder material with potential applications. In this work, the preparation of nano-graphite powder in steel chamber by pure TNT (trinitrotoluene) explosives has been introduced. In the synthesis process, the protective gases in the steel chamber are N2, CO2 and Ar, and the pressure is 0.25-2 atm. Raman spectrum of the nano-graphite was measured. The characteristic Raman band assigned to sp2 of graphite has been observed at about 1 585 cm(-1) with half-peak width of 22 cm(-1). The peak shifted to a higher frequency by 5 cm(-1) compared with that of bulk graphite. The authors explain this blue shift phenomenon by size effect. The average size of nanographite from Raman measurement is 2.97-3.97 nm. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to measure the structure and particle size of the nano-graphite. The crystallite size of nano-graphite estimated from XRD andTEM are 2.58 nm (acid untreated) and 1.86 nm (acid treated) respectively, which is in accord with the results of the measurement approximately.
Asunto(s)
Sustancias Explosivas/química , Grafito/química , Espectrometría Raman , Trinitrotolueno/química , Argón/química , Dióxido de Carbono/química , Cristalización , Grafito/síntesis química , Microscopía Electrónica de Transmisión , Nanoestructuras/química , Nitrógeno/química , Tamaño de la Partícula , Polvos , Difracción de Rayos XRESUMEN
OBJECTIVE: Different biosensors for early diagnosis of diabetes have been discussed increasingly. We demonstrate the applicability of a glucose biosensor for rapid and quantitative determination of glucose in experimental sample solutions. DESIGN AND METHODS: Polyethylenimine (PEI)-stabilized glucose oxidase (GOD) was used for the construction of stable glucose biosensor utilizing a simple manufacture procedure. The stabilized glucose oxidase was immobilized by physical adsorption into activated porous and conductive carbonaceous material-woodceramics that served as the immobilization matrix and the electrochemical transducer. The optimum parameters for the construction of the biosensor and the influences of pH and temperature on the biosensor response were explored. RESULTS: Optimum results were obtained using soaking solutions of 2300 U/ml GOD, 10 mg/ml mediator toluidine blue O (TBO), and 2.0%, w/v PEI. The sensitivity of the resulting biosensor for glucose was 1.22 microA/mM, with a linear response in the concentration range of 0.5-7 mM. The sensor-to-sensor reproducibility was good, the relative standard deviation (R.S.D.) being less than 8.0%. The storage and operational stabilities of the glucose biosensor were good. CONCLUSIONS: The glucose biosensor provides reproducible and quantitative information on glucose within minutes and is applicable for the detection of glucose in experimental samples.
Asunto(s)
Técnicas Biosensibles/métodos , Glucosa Oxidasa , Glucosa/análisis , Aspergillus niger/química , Electroquímica/métodos , Electrodos , Enzimas Inmovilizadas , Cinética , Sensibilidad y Especificidad , TemperaturaRESUMEN
<p><b>OBJECTIVE</b>To investigate the application of the island flap based on the postfemur neurocutaneous nutrient vessel.</p><p><b>METHODS</b>The flap was designed and applied to repair the defects in the gluteal, popliteal fossa or the bilateral postfemur areas. A total of 11 cases (12 defects) were treated with this method. The size of the defects ranged from 4.0 cm x 7.8 cm to 8.3 cm x 16.6 cm.</p><p><b>RESULTS</b>Of the 12 defects, 9 achieved complete success. Epidermal necrosis occurred in the distal part of the flap in 3 defects owing to venous stasis, which were cured with skin grafting. Postoperative follow-up for 8-19 months showed that the appearance, texture, and function of the flap were satisfactory.</p><p><b>CONCLUSIONS</b>The advantages of the flap lie in the reliable blood supply, constant anatomy, and without sacrificing a major artery. The key points for the flap survival are utilizing the "Superficial vein-nutrient vessel of the cutaneous nerve system" and retaining a comet tail-shaped soft-tissue pedicle in the flap creation.</p>