RESUMEN
The dimeric focal adhesion protein talin contains up to 22 cryptic vinculin binding sites that are exposed by unfolding. Using a novel method to monitor the in situ dynamics of the talin dimer stretch, we find that in contrast to several prevalent talin dimer models the integrin-binding talin N-termini are separated by 162 ± 44 nm on average whereas as expected the C-terminal dimerization domains colocalize and are mobile. Using vinculin tagged by DHFR-TMP Atto655 label, we found that optimal vinculin and vinculin head binding occurred when talin was stretched to 180 nm, while the controls did not bind to talin. Surprisingly, multiple vinculins bound within a single second in narrowly localized regions of the talin rod during stretching. We suggest that talin stretches as an antiparallel dimer and that activates vinculin binding in a cooperative manner, consistent with the stabilization of folded talin by other binding proteins.
RESUMEN
A theoretical framework for prediction of the dynamic evolution of chemical species in DNA amplification reactions, for any specified sequence and operating conditions, is reported. Using the polymerase chain reaction (PCR) as an example, we developed a sequence- and temperature-dependent kinetic model for DNA amplification using first-principles biophysical modeling of DNA hybridization and polymerization. We compare this kinetic model with prior PCR models and discuss the features of our model that are essential for quantitative prediction of DNA amplification efficiency for arbitrary sequences and operating conditions. Using this model, the kinetics of PCR is analyzed. The ability of the model to distinguish between the dynamic evolution of distinct DNA sequences in DNA amplification reactions is demonstrated. The kinetic model is solved for a typical PCR temperature protocol to motivate the need for optimization of the dynamic operating conditions of DNA amplification reactions. It is shown that amplification efficiency is affected by dynamic processes that are not accurately represented in the simplified models of DNA amplification that form the basis of conventional temperature cycling protocols. Based on this analysis, a modified temperature protocol that improves PCR efficiency is suggested. Use of this sequence-dependent kinetic model in a control theoretic framework to determine the optimal dynamic operating conditions of DNA amplification reactions, for any specified amplification objective, is discussed.
Asunto(s)
ADN/genética , Modelos Biológicos , Secuencia de Bases , ADN/química , ADN/metabolismo , ADN Nucleotidiltransferasas/metabolismo , Cinética , Hibridación de Ácido Nucleico , Reacción en Cadena de la Polimerasa , TemperaturaRESUMEN
Over the past decade, chemical tags have been developed to complement the use of fluorescent proteins in live-cell imaging. Chemical tags retain the specificity of protein labeling achieved with fluorescent proteins through genetic encoding, but provide smaller, more robust tags and modular use of organic fluorophores with high photon output and tailored functionalities. The trimethoprim-based chemical tag (TMP-tag) was initially developed based on the high affinity interaction between E. coli dihydrofolate reductase and the antibiotic trimethoprim and was subsequently rendered covalent and fluorogenic via proximity-induced protein labeling reactions. To date, the TMP-tag is one of the few chemical tags that enable intracellular protein labeling and high-resolution live-cell imaging. Here we describe the general design, chemical synthesis, and application of TMP-tag for live-cell imaging. Alternate protocols for synthesizing and using the covalent and the fluorogenic TMP-tags are also included.
Asunto(s)
Antibacterianos/química , Colorantes Fluorescentes/química , Trimetoprim/análogos & derivados , Trimetoprim/química , Antibacterianos/síntesis química , Línea Celular , Diseño de Fármacos , Colorantes Fluorescentes/síntesis química , Humanos , Imagen Molecular/métodos , Proteínas Recombinantes de Fusión/genética , Proteínas Recombinantes de Fusión/metabolismo , Transfección/métodos , Trimetoprim/síntesis químicaRESUMEN
Developed to complement the use of fluorescent proteins in live cell imaging, chemical tags enjoy the benefit of modular incorporation of organic fluorophores, opening the possibility of high photon output and special photophysical properties. However, the theoretical challenge in using chemical tags as opposed to fluorescent proteins for high-resolution imaging is background noise from unbound and/or nonspecifically bound ligand-fluorophore. We envisioned we could overcome this limit by engineering fluorogenic trimethoprim-based chemical tags (TMP-tags) in which the fluorophore is quenched until binding with E. coli dihydrofolate reductase (eDHFR)-tagged protein displaces the quencher. Thus, we began by building a nonfluorogenic, covalent TMP-tag based on a proximity-induced reaction known to achieve rapid and specific labeling both in vitro and inside of living cells. Here we take the final step and render the covalent TMP-tag fluorogenic. In brief, we designed a trimeric TMP-fluorophore-quencher molecule (TMP-Q-Atto520) with the quencher attached to a leaving group that, upon TMP binding to eDHFR, would be cleaved by a cysteine residue (Cys) installed just outside the binding pocket of eDHFR. We present the in vitro experiments showing that the eDHFR:L28C nucleophile cleaves the TMP-Q-Atto520 rapidly and efficiently, resulting in covalent labeling and remarkable fluorescence enhancement. Most significantly, while only our initial design, TMP-Q-Atto520 achieved the demanding goal of not only labeling highly abundant, localized intracellular proteins but also less abundant, more dynamic cytoplasmic proteins. These results suggest that the fluorogenic TMP-tag can significantly impact high-resolution live cell imaging and further establish the potential of proximity-induced reactivity and organic chemistry more broadly as part of the growing toolbox for synthetic biology and cell engineering.
Asunto(s)
Compuestos Azo/química , Colorantes Fluorescentes/química , Sondas Moleculares/química , Imagen Óptica , Rodaminas/química , Línea Celular , Electroforesis en Gel de Poliacrilamida , Humanos , Modelos Biológicos , Estructura Molecular , Colorantes de Rosanilina , Procesamiento de Señales Asistido por Computador , TrimetoprimRESUMEN
Chemical tags are now viable alternatives to fluorescent proteins for labeling proteins in living cells with organic fluorophores that have improved brightness and other specialized properties. Recently, we successfully rendered our TMP-tag covalent with a proximity-induced reaction between the protein tag and the ligand-fluorophore label. This initial design, however, suffered from slow in vitro labeling kinetics and limited live cell protein labeling. Thus, here we report a second-generation covalent TMP-tag that has a fast labeling half-life and can readily label a variety of intracellular proteins in living cells. Specifically, we designed an acrylamide-trimethoprim-fluorophore (A-TMP-fluorophore v2.0) electrophile with an optimized linker for fast reaction with a cysteine (Cys) nucleophile engineered just outside the TMP-binding pocket of Escherichia coli dihydrofolate reductase (eDHFR) and developed an efficient chemical synthesis for routine production of a variety of A-TMP-probe v2.0 labels. We then screened a panel of eDHFR:Cys variants and identified eDHFR:L28C as having an 8-min half-life for reaction with A-TMP-biotin v2.0 in vitro. Finally, we demonstrated live cell imaging of various cellular protein targets with A-TMP-fluorescein, A-TMP-Dapoxyl, and A-TMP-Atto655. With its robustness, this second-generation covalent TMP-tag adds to the limited number of chemical tags that can be used to covalently label intracellular proteins efficiently in living cells. Moreover, the success of this second-generation design further validates proximity-induced reactivity and organic chemistry as tools not only for chemical tag engineering but also more broadly for synthetic biology.
Asunto(s)
Escherichia coli/citología , Escherichia coli/enzimología , Colorantes Fluorescentes/química , Tetrahidrofolato Deshidrogenasa/análisis , Acrilamidas/química , Animales , Línea Celular , Supervivencia Celular , Células HEK293 , Humanos , Microscopía Fluorescente , Modelos Moleculares , Proteínas/análisis , Coloración y Etiquetado , Trimetoprim/químicaRESUMEN
To build on the last century's tremendous strides in understanding the workings of individual proteins in the test tube, we now face the challenge of understanding how macromolecular machines, signaling pathways, and other biological networks operate in the complex environment of the living cell. The fluorescent proteins (FPs) revolutionized our ability to study protein function directly in the cell by enabling individual proteins to be selectively labeled through genetic encoding of a fluorescent tag. Although FPs continue to be invaluable tools for cell biology, they show limitations in the face of the increasingly sophisticated dynamic measurements of protein interactions now called for to unravel cellular mechanisms. Therefore, just as chemical methods for selectively labeling proteins in the test tube significantly impacted in vitro biophysics in the last century, chemical tagging technologies are now poised to provide a breakthrough to meet this century's challenge of understanding protein function in the living cell. With chemical tags, the protein of interest is attached to a polypeptide rather than an FP. The polypeptide is subsequently modified with an organic fluorophore or another probe. The FlAsH peptide tag was first reported in 1998. Since then, more refined protein tags, exemplified by the TMP- and SNAP-tag, have improved selectivity and enabled imaging of intracellular proteins with high signal-to-noise ratios. Further improvement is still required to achieve direct incorporation of powerful fluorophores, but enzyme-mediated chemical tags show promise for overcoming the difficulty of selectively labeling a short peptide tag. In this Account, we focus on the development and application of chemical tags for studying protein function within living cells. Thus, in our overview of different chemical tagging strategies and technologies, we emphasize the challenge of rendering the labeling reaction sufficiently selective and the fluorophore probe sufficiently well behaved to image intracellular proteins with high signal-to-noise ratios. We highlight recent applications in which the chemical tags have enabled sophisticated biophysical measurements that would be difficult or even impossible with FPs. Finally, we conclude by looking forward to (i) the development of high-photon-output chemical tags compatible with living cells to enable high-resolution imaging, (ii) the realization of the potential of the chemical tags to significantly reduce tag size, and (iii) the exploitation of the modular chemical tag label to go beyond fluorescent imaging.