Preparation of Polydimethylsiloxane-Modified Waterborne Polyurethane Coatings for Marine Applications.

A series of waterborne polyurethane dispersions (WPUs) modified with hydroxyl-terminated polydimethylsiloxane (PDMS) were prepared by incorporating PDMS into the soft segments of polyurethane chains. The structural characteristics of the prepared samples were analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and particle size analysis (PSA). The effect of PDMS content on the thermal and mechanical properties of PDMS-modified waterborne polyurethanes (PS-WPU) was investigated. In addition, the water resistance and dimensional stability of the PS-WPU were investigated by measuring its water absorption ratio and water contact angle along with universal testing machine measurements.

Janus Graphene Oxide Sheets with Fe3O4 Nanoparticles and Polydopamine as Anodes for Lithium-Ion Batteries.

In this study, a one-step process to fabricate "Janus"-structured nanocomposites with iron oxide (Fe3O4) nanoparticles (Fe3O4 NPs) and polydopamine (PDA) on each side of a graphene oxide (GO) nanosheet using the Langmuir-Schaefer technique has been proposed. The Fe3O4 NPs-GO hybrid is used as a high-capacity active material, while PDA is added as a binder due to its unique wet-resistant adhesive property. The transmission electron microscopy image shows a superlattice-like out-of-plane section of the multilayered nanocomposite, which maximizes the density of the composite materials. Grazing-incidence small-angle X-ray scattering results combined with scanning electron microscopy images confirm that the multilayered Janus composite exhibits an in-plane hexagonal array structure of closely packed Fe3O4 NPs. This Janus multilayered structure is expected to maximize the amount of active material in a specific volume and reduce volume changes caused by the conversion reaction of Fe3O4 NPs. According to the electrochemical results, the Janus multilayer electrode delivers an excellent capacity of ∼903 mAh g-1 at a current density of 200 mA g-1 and a reversible capacity of ∼639 mAh g-1 at 1 A g-1 up to the 1800th cycle, indicating that this Janus composite can be a promising anode for Li-ion batteries.

Enhanced Dynamics of Confined Polymers near the Immiscible Polymer-Polymer Interface: Neutron Reflectivity Studies.

For polymer-blend films, local dynamics in confined polymer domains tend to differ from the bulk because of significant contributions from the polymer-polymer interface. Herein, we investigated the diffusion dynamics of entangled polymer thin films confined between different polymers in a direction perpendicular to the surface using neutron reflectivity. We found that a bilayer of poly(methyl methacrylate) (PMMA) and deuterated PMMA (dPMMA) sandwiched between polystyrene (PS) layers exhibited significant increase in mobility near the polymer-polymer interface with decreasing PMMA thickness. This indicates that the contribution of repulsive interactions at the immiscible polymer-polymer interface becomes more significant as the film thickness decreases. We also found that the interfacial roughness between PMMA and PS (28 Å at equilibrium) and soft confinement of PS layers did not significantly affect the change in the diffusion dynamics of the adjacent PMMA. This was evidenced by comparison with the diffusion results of multilayers with a flat interface (8 Å at equilibrium) between PMMA and hard PS by UV cross-linking.

Position-Dependent Diffusion Dynamics of Entangled Polymer Melts Nanoconfined by Parallel Immiscible Polymer Films.

The morphological structure and dynamics of confined polymers adjacent to the polymer-polymer interface have a profound effect on determining the overall physical properties of polymer blends. We measured the diffusion dynamics of poly(methyl methacrylate) (PMMA) melts confined between polystyrene (PS) layers using neutron reflectivity. Combinations of various thicknesses of PMMA and deuterated PMMA (dPMMA) allowed us to experimentally reveal the nonmonotonic behavior of polymer mobility near the PS-PMMA interface. From the neutron reflectivity results, we found that the polymers adjacent to the immiscible polymer-polymer interface showed enhanced diffusion dynamics because of the repulsive interaction between PS and PMMA, whereas the polymer at local regions farther from the interface exhibited reduced dynamics. This is probably due to the nonspherical conformation of PMMA and spatial confinement near the PS-PMMA interface.

Dewetting of Thin Polymer Films on Wrinkled Graphene Oxide Monolayers.

We investigated the effect of the morphological structure of a graphene oxide (GO) monolayer on the dewetting dynamics of the upper polymer thin films. The Langmuir-Schaefer (LS) technique was used to prepare a wrinkled GO ( wrGO) structure with a root mean square (rms) roughness of 22.7 Å. The dewetting behavior of poly(methyl methacrylate) (PMMA) thin films on the wrGO monolayers was perfectly prevented, whereas the PMMA thin films on a flat GO monolayer were dewetted at 203 °C. This wrinkle effect of the GO can be also obtained when the GOs monolayers are intercalated to the PMMA/polystyrene (PS) interface. In this multilayer, the flat GO monolayer at the interface between the PS and PMMA layers was spontaneously roughened with rms roughness of 46.9 Å after annealing and also prohibited the dewetting behavior. From the results, we found that to improve the compatibility of polymer blends by adding the two-dimensional nanosheets, it is important to control the morphological structure of the sheets at the interface, along with manipulation of the GO-polymer interactions.

Novel GALT variations and mutation spectrum in the Korean population with decreased galactose-1-phosphate uridyltransferase activity.

BACKGROUND: Classic galactosemia (OMIM #230400) is an autosomal recessive metabolic disorder caused by a deficiency of the galactose-1-phosphate uridyltransferase (GALT, EC2.7.7.12) protein due to mutations in the GALT gene. The aim of this study was to provide a comprehensive and updated mutation spectrum of GALT in a Korean population. METHODS: Thirteen unrelated patients screened positive for galactosemia in a newborn screening program were included in this study. They showed a reduced GALT enzyme activity in red blood cells. Direct sequencing of the GALT gene and in silico analyses were done to evaluate the impact of novel variations upon GALT enzyme activity. We also reviewed previous reports for GALT mutations in Koreans. RESULTS: We identified six novel likely pathogenic variations including three missense (p.Ala101Asp, p.Tyr165His, and p.Pro257Thr), one small deletion/insertion [c.826_827delinsAA (p.Ala276Asn)], one frameshift (p.Asn96Serfs*5), and one splicing (c.378-1G > C) likely pathogenic variations. The most frequent variation was the Duarte variant (c.940A > G, 35.3%), followed by c.507G > C (p.Gln169His, 9.6%), among 34 Korean patients. Other mutations were widely scattered. None of the eight common mutations used for targeted mutation analysis in Western countries including p.Gln188Arg, p.Ser135Leu, p.Lys285Asn, p.Leu195Pro, p.Tyr209Cys, p.Phe171Ser, c.253-2A > G, and a 5 kb deletion, had been found in Koreans until this study. CONCLUSIONS: Considering the mutation spectrum in Koreans, direct sequence analysis of entire GALT exons is recommended for accurate diagnosis. The mutations responsible for GALT deficiency in the Korean population were clearly different from those of other populations.