Assessment of structural similarity in CT using filtered backprojection and iterative reconstruction: a phantom study with 3D printed lung vessels.

OBJECTIVE: To compare the performance of three generations of CT reconstruction techniques using structural similarity (SSIM) as a measure of image quality for CT scans of a chest phantom with 3D printed lung vessels. METHODS: CT images of the chest phantom were acquired at seven dose levels by changing the tube current while other acquisition parameters were kept constant. Three CT reconstruction techniques were applied on each acquisition. The first technique was filtered backprojection (FBP), the second technique was FBP with iterative filtering (adaptive iteration dose reduction in 3 dimensions (AIDR 3D)) and the third technique was model-based iterative reconstruction (Forward projected model-based Iterative Reconstruction SoluTion (FIRST)). Image quality of the CT data was quantified in terms of SSIM. The SSIM index was used for image quality comparison between the dose levels and different reconstruction techniques. The SSIM index gives a value between 0 and 1, with 0 as the lowest image quality and 1 as an excellent image quality. RESULTS: The lowest SSIM index was observed for FBP at all dose levels. The reconstruction technique with the highest SSIM depends on the dose level. For tube currents higher than 80 mA, AIDR 3D showed the highest SSIM index, and for tube currents lower or equal to 80 mA FIRST showed the highest SSIM index. CONCLUSION: SSIM index is a robust quantity and is correlated to the image quality as perceived by the humans. Advanced CT reconstruction techniques provide better image quality in all conditions compared to FBP. Advances in knowledge: SSIM is a robust measure to compare CT image quality for advanced reconstruction techniques relative to a reference. The 3D print technology is an useful method for the development of dedicated phantoms for CT image quality evaluation.

SimDoseCT: dose reporting software based on Monte Carlo simulation for a 320 detector-row cone-beam CT scanner and ICRP computational adult phantoms.

This study aims to develop and test software for assessing and reporting doses for standard patients undergoing computed tomography (CT) examinations in a 320 detector-row cone-beam scanner. The software, called SimDoseCT, is based on the Monte Carlo (MC) simulation code, which was developed to calculate organ doses and effective doses in ICRP anthropomorphic adult reference computational phantoms for acquisitions with the Aquilion ONE CT scanner (Toshiba). MC simulation was validated by comparing CTDI measurements within standard CT dose phantoms with results from simulation under the same conditions. SimDoseCT consists of a graphical user interface connected to a MySQL database, which contains the look-up-tables that were generated with MC simulations for volumetric acquisitions at different scan positions along the phantom using any tube voltage, bow tie filter, focal spot and nine different beam widths. Two different methods were developed to estimate organ doses and effective doses from acquisitions using other available beam widths in the scanner. A correction factor was used to estimate doses in helical acquisitions. Hence, the user can select any available protocol in the Aquilion ONE scanner for a standard adult male or female and obtain the dose results through the software interface. Agreement within 9% between CTDI measurements and simulations allowed the validation of the MC program. Additionally, the algorithm for dose reporting in SimDoseCT was validated by comparing dose results from this tool with those obtained from MC simulations for three volumetric acquisitions (head, thorax and abdomen). The comparison was repeated using eight different collimations and also for another collimation in a helical abdomen examination. The results showed differences of 0.1 mSv or less for absolute dose in most organs and also in the effective dose calculation. The software provides a suitable tool for dose assessment in standard adult patients undergoing CT examinations in a 320 detector-row cone-beam scanner.

Perfusion CT of the Brain and Liver and of Lung Tumors: Use of Monte Carlo Simulation for Patient Dose Estimation for Examinations With a Cone-Beam 320-MDCT Scanner.

OBJECTIVE: The purpose of this study was to estimate the patient dose from perfusion CT examinations of the brain, lung tumors, and the liver on a cone-beam 320-MDCT scanner using a Monte Carlo simulation and the recommendations of the International Commission on Radiological Protection (ICRP). MATERIALS AND METHODS: A Monte Carlo simulation based on the Electron Gamma Shower Version 4 package code was used to calculate organ doses and the effective dose in the reference computational phantoms for an adult man and adult woman as published by the ICRP. Three perfusion CT acquisition protocols--brain, lung tumor, and liver perfusion--were evaluated. Additionally, dose assessments were performed for the skin and for the eye lens. Conversion factors were obtained to estimate effective doses and organ doses from the volume CT dose index and dose-length product. RESULTS: The sex-averaged effective doses were approximately 4 mSv for perfusion CT of the brain and were between 23 and 26 mSv for the perfusion CT body protocols. The eye lens dose from the brain perfusion CT examination was approximately 153 mGy. The sex-averaged peak entrance skin dose (ESD) was 255 mGy for the brain perfusion CT studies, 157 mGy for the lung tumor perfusion CT studies, and 172 mGy for the liver perfusion CT studies. CONCLUSION: The perfusion CT protocols for imaging the brain, lung tumors, and the liver performed on a 320-MDCT scanner yielded patient doses that are safely below the threshold doses for deterministic effects. The eye lens dose, peak ESD, and effective doses can be estimated for other clinical perfusion CT examinations from the conversion factors that were derived in this study.

A Monte Carlo simulation for the estimation of patient dose in rest and stress cardiac computed tomography with a 320-detector row CT scanner.

PURPOSE: To estimate organ dose and effective dose for patients for cardiac CT as applied in an international multicenter study (CORE320) with a 320-Detector row CT scanner using Monte Carlo (MC) simulations and voxelized phantoms. The effect of positioning of the arms, off-centering the patient and heart rate on patient dose was analyzed. METHODS: A MC code was tailored to simulate the geometry and characteristics of the CT scanner. The phantoms representing the adult reference male and female were implemented according to ICRP 110. Effective dose and organ doses were obtained for CT acquisition protocols for calcium scoring, coronary angiography and myocardial perfusion. RESULTS: For low heart rate, the normalized effective dose (E) for cardiac CT was higher for female (5.6 mSv/100 mAs) compared to male (2.2 mSv/100 mAs) due to the contribution of female breast tissue. Averaged E for female and male was 11.3 mSv for the comprehensive cardiac protocol consisting of calcium scoring (1.9 mSv); coronary angiography including rest cardiac perfusion (5.1 mSv) and stress cardiac perfusion (4.3 mSv). These values almost doubled at higher heart rates (20.1 mSv). Excluding the arms increased effective dose by 6-8%, centering the patient showed no significant effect. The k-factor (0.028 mSv/mGy.cm) derived from this study leads to effective doses up to 2-3 times higher than the values obtained using now outdated methodologies. CONCLUSION: MC modeling of cardiac CT examinations on realistic voxelized phantoms allowed us to assess patient doses accurately and we derived k-factors that are well above those published previously.

A Survey of Radiation Doses in CT Urography Before and After Implementation of Iterative Reconstruction.

OBJECTIVE: The purpose of this study was to survey the radiation dose used in CT urography (CTU) in routine clinical practice, both before and after implementation of a scanning protocol that uses iterative reconstruction (Adaptive Iterative Dose Reduction 3D [AIDR 3D]). MATERIALS AND METHODS: We retrospectively surveyed dose reports from consecutive CTU examinations performed in 2011 with the use of 64- and 320-MDCT scanners that were reconstructed with filtered back projection (FBP) and from CTU examinations performed from May 2012 through November 2013 that were reconstructed with the use of AIDR 3D. Findings from these dose reports were then correlated with such patient characteristics as weight and body mass index (BMI; weight in kilograms divided by the square of height in meters). Only dose reports from single-bolus three-phase CTU examinations were included in the study. The volume CT dose index, dose-length product (DLP), and effective dose were surveyed both per examination and per phase by use of published effective dose DLP conversion factors. Image quality was evaluated subjectively for a subset of patients. RESULTS: The two study cohorts included 82 patients (median patient weight, 75.0 kg; median BMI, 25.3) who underwent CTU with FBP and 85 patients (median patient weight, 78.0 kg; median BMI, 24.5) who underwent CTU with AIDR 3D. The median total DLP and median effective dose were 924 mGy · cm and 13.0 mSv, respectively, in the CTU with the FBP cohort and 433 mGy · cm and 6.1 mSv, respectively, in the CTU with the AIDR 3D cohort. The median DLP in the unenhanced, nephrogenic, and excretory phases was 218, 300, and 441 mGy · cm, respectively, in patients undergoing CTU with FBP and 114, 121, and 190 mGy · cm, respectively, in patients undergoing CTU with AIDR 3D. Image quality was diagnostic in both groups, with relatively fewer artifacts noted on scans obtained using CTU with AIDR 3D. CONCLUSION: Our study presents detailed dose data from three-phase CTU examinations performed both before and after implementation of iterative reconstruction. Implementation of a CTU protocol using iterative reconstruction resulted in a mean effective dose of 6.1 mSv with preservation of clinical diagnostic image quality.

Cone-beam CT versus multi-slice CT systems for postoperative imaging of cochlear implantation--a phantom study on image quality and radiation exposure using human temporal bones.

HYPOTHESIS: Image quality of low-dose multi-slice computed tomography (MSCT) after cochlear implantation is comparable to that of cone-beam computed tomography (CBCT). BACKGROUND: CBCT has been described as a low-dose alternative with superior image quality to MSCT for postoperative cochlear implant (CI) imaging, but to our knowledge, no dose-matched comparisons of image quality have been published. MATERIALS AND METHODS: Five human cochleae were implanted with CI electrodes and scanned on two CBCT and two MSCT systems. Four independent observers rated aspects of image quality on a five-point scale. CBCT scans were compared to clinical and dose-matched MSCT scans. Declining-dose MSCT protocols were compared to the clinical protocol. CT phantoms were used to determine effective dose and resolution for each acquisition protocol. RESULTS: Effective dose of the CBCT protocols was 6 to 16% of the clinical MSCT dose. Visibility of cochlear inner and outer walls and overall image quality were positively correlated with radiation dose on MSCT and image quality was better with clinical MSCT than with CBCT protocols. In other comparisons, differences between systems were found, but a distinction between CBCT and MSCT could not be made. CONCLUSION: CBCT and dose-matched MSCT are both suitable for postoperative CI imaging. Selecting a CT system and radiation dose depends on which cochlear structures need to be visualized.

Total bolus extraction method improves arterial image quality in dynamic CTAs derived from whole-brain CTP data.

Background and Purposes. The 320-detector row CT scanner enables visualization of whole-brain hemodynamic information (dynamic CT angiography (CTA) derived from CT perfusion scans). However, arterial image quality in dynamic CTA (dCTA) is inferior to arterial image quality in standard CTA. This study evaluates whether the arterial image quality can be improved by using a total bolus extraction (ToBE) method. Materials and Methods. DCTAs of 15 patients, who presented with signs of acute cerebral ischemia, were derived from 320-slice CT perfusion scans using both the standard subtraction method and the proposed ToBE method. Two neurointerventionalists blinded to the scan type scored the arterial image quality on a 5-point scale in the 4D dCTAs in consensus. Arteries were divided into four categories: (I) large extradural, (II) intradural (large, medium, and small), (III) communicating arteries, and (IV) cerebellar and ophthalmic arteries. Results. Quality of extradural and intradural arteries was significantly higher in the ToBE dCTAs than in the standard dCTAs (extradural P = 0.001, large intradural P < 0.001, medium intradural P < 0.001, and small intradural P < 0.001). Conclusion. The 4D dCTAs derived with the total bolus extraction (ToBE) method provide hemodynamic information combined with improved arterial image quality as compared to standard 4D dCTAs.

Additional diagnostic value of integrated analysis of cardiac CTA and SPECT MPI using the SMARTVis system in patients with suspected coronary artery disease.

UNLABELLED: CT angiography (CTA) and SPECT myocardial perfusion imaging (MPI) are complementary imaging techniques to assess coronary artery disease (CAD). Spatial integration and combined visualization of SPECT MPI and CTA data may facilitate correlation of myocardial perfusion defects and subtending coronary arteries and thus offer additional diagnostic value over either stand-alone or side-by-side interpretation of the respective datasets from the 2 modalities. In this study, we investigated the additional diagnostic value of a software-based CTA/SPECT MPI image fusion system over conventional side-by-side analysis in patients with suspected CAD. METHODS: Seventeen symptomatic patients who underwent both CTA and SPECT MPI within a 90-d period were included in our study; 7 of them also underwent invasive coronary angiography (ICA). The potential benefits of the synchronized multimodal heart visualization (SMARTVis) system in assessing CAD were investigated through a case study involving 4 experts from 2 medical centers, in which we performed, first, a side-by-side analysis using structured CTA and SPECT reports and, second, an integrated analysis using the SMARTVis system in addition to the reports. RESULTS: The fused interpretation led to a more accurate diagnosis, reflected in an increase in the individual observers' sensitivity and specificity to correctly refer for invasive angiography eventually followed by revascularization. For the first, second, third, and fourth observers, the respective sensitivities improved from 50%, 60%, 80%, and 80% to 70%, 80%, 100%, and 90% and the respective specificities from 100%, 94%, 83%, and 83% to 100%, 100%, 94%, and 83%. Additionally, the interobserver diagnosis agreement increased from 74% to 84%. The improvement was primarily found in patients presenting with CAD in more vessels than the number of reported perfusion defects. CONCLUSION: Integrated analysis of cardiac CTA and SPECT MPI using the SMARTVis system results in an improved diagnostic performance.

Adaptive iterative dose reduction 3D versus filtered back projection in CT: evaluation of image quality.

OBJECTIVE: The purpose of this study was to evaluate image quality with filtered back projection (FBP) and adaptive iterative dose reduction 3D (AIDR 3D). MATERIALS AND METHODS: Phantom acquisitions were performed at six dose levels to assess spatial resolution, noise, and low-contrast detectability (LCD). Spatial resolution was assessed with the modulation transfer function at high and low contrast levels. Noise power spectrum and SD of attenuation were assessed. LCD was calculated with a mathematic model observer applied to phantom CT images. The subjective image quality of clinical CT scans was assessed by five radiologists. RESULTS: Compared with FBP, AIDR 3D resulted in substantial noise reduction at all frequencies with a similar shape of the noise power spectrum. Spatial resolution was similar for AIDR 3D and FBP. LCD improved with AIDR 3D, which was associated with a potential average dose reduction of 36% (range, 9-86%). The observer study showed that overall image quality improved and artifacts decreased with AIDR 3D. CONCLUSION: AIDR 3D performs better than FBP with regard to noise and LCD, resulting in better image quality, and performs similarly with respect to spatial resolution. The evaluation of image quality of clinical CT scans was consistent with the objective assessment of image quality with a phantom. The amount of dose reduction should be investigated for each clinical indication in studies with larger numbers of patients.

Effect of dose reduction on image quality and diagnostic performance in coronary computed tomography angiography.

To evaluate the effect of radiation dose reduction on image quality and diagnostic accuracy of coronary computed tomography (CT) angiography. Coronary CT angiography studies of 40 patients with (n = 20) and without (n = 20) significant (≥50 %) stenosis were included (26 male, 14 female, 57 ± 11 years). In addition to the original clinical reconstruction (100 % dose), simulated images were created that correspond to 50, 25 and 12.5 % of the original dose. Image quality and diagnostic performance in identifying significant stenosis were determined. Receiver-operator-characteristics analysis was used to assess diagnostic accuracy at different dose levels. The identification of patients with significant stenosis decreased consistently at doses of 50, 25 and 12.5 of the regular clinical acquisition (100 %). The effect was relatively weak at 50 % dose, and was strong at dose levels of 25 and 12.5 %. At lower doses a steady increase was observed for false negative findings. The number of coronary artery segments that were rated as diagnostic decreased gradually with dose, this was most prominent for smaller segments. The area-under-the-curve (AUC) was 0.90 (p = 0.4) at 50 % dose; accuracy decreased significantly with 25 % (AUC 0.70) and 12.5 % dose (AUC 0.60) (p < 0.0001), with underestimation of patients having significant stenosis. The clinical acquisition protocol for evaluation of coronary artery stenosis with CT angiography represents a good balance between image quality and patient dose. A potential for a modest (<50 %) reduction of tube current might exist. However, more substantial reduction of tube current will reduce diagnostic performance of coronary CT angiography substantially.

Electrode migration in cochlear implant patients: not an exception.

OBJECTIVE: It was the aim of this study to investigate the occurrence of electrode migration of a cochlear implant in patients with and without complaints. METHODS: We performed a retrospective case review in a tertiary referral center. The electrode position was evaluated in 35 cochlear implantees, 16 with a CII HiFocus1 (non-positioner) and 19 with a HiRes90K HiFocus1J, using multiplanar reconstructions of the postoperative CT scans. Of 5 patients, a second scan was obtained to evaluate complaints of performance drop, vertigo, tinnitus, headache or nonauditory stimulation. Displacements of the electrode contacts were calculated and displacements of >1 mm were considered a migration. The possible correlation with implant type, insertion depth or presence of complaints was analyzed. RESULTS: Migrations were detected in 10 patients (29%). There was a significant effect of the implant type in favour of the HiFocus1, but no relation with the original insertion depth of the device. In the 5 patients scanned because of complaints, two migrations were detected. CONCLUSIONS: In our patient population, electrode migration was not uncommon and turned out to occur in patients with and without complaints.

Metal artifact reduction for CT: development, implementation, and clinical comparison of a generic and a scanner-specific technique.

PURPOSE: To develop, implement, and compare two metal artifact reduction methods for CT. METHODS: Two methods for metal artifact reduction were developed. The first is based on applying corrections in a Radon transformation of the CT images. The second method is based on a forward projection of the CT images and applying corrections in the scanner's original raw data. The first method is generic since it does not depend on the scanner specifications. For the second method, detailed information on the design of the CT scanner and the raw data of the study is required. Clinical implementation and evaluation were performed using pre- and post-operative CT scans of four patients with shoulder prosthesis. For comparison of these methods, the authors developed a quantitative technique that compares improvement in image quality for the two metal artifact reduction techniques with the image quality of the uncorrected images. RESULTS: Metal artifact reduction using either of the two methods yields a decrease of noise and artifacts in CT scans of patients with shoulder prostheses. Artifacts that appeared as bright and dark streaks were reduced or eliminated and as a result image quality improved. Quantitative assessment of clinical images showed improved image quality for both techniques of metal artifact reduction, but the method based on correction in original raw data performed better in all comparisons. CONCLUSION: Both methods are effective for metal artifact reduction, but better performance was observed for the method that is based on correcting the original raw data. The used evaluation technique provides an objective way of evaluating the metal artifacts in clinical CT images.

Performance of longitudinal and volumetric tube current modulation in a 64-slice CT with different choices of acquisition and reconstruction parameters.

Aim of the study was to evaluate the performance of a tube current modulation (TCM) system ((SURE)Exposure 3D). On a 64 detector-row CT scanner (Aquilion 64, Toshiba), performance of fixed tube current, longitudinal TCM, and volumetric TCM acquisitions were assessed. A homogeneous cone-shaped phantom and an anthropomorphic phantom were used. Tube current and noise profiles were quantitatively analysed by box and whisker plots when phantom size, acquisition, and reconstruction parameters were varied. At similar median noise, fixed tube current scanning showed a noise range of 16.8-38.3 HU, while longitudinal TCM showed a range of 19.4-31.4 HU and volumetric TCM showed an even lower range of 20.7-28.7 HU. When acquisitions resulting in similar image quality (noise) were compared, the use of volumetric compared to longitudinal TCM resulted in a variable radiation dose reduction up to 6.6%. In conclusion, (SURE)Exposure 3D resulted in more uniform image quality at a lower dose. Volumetric TCM shows improved results over longitudinal TCM.

Measuring femoral lesions despite CT metal artefacts: a cadaveric study.

OBJECTIVE: Computed tomography is the modality of choice for measuring osteolysis but suffers from metal-induced artefacts obscuring periprosthetic tissues. Previous papers on metal artefact reduction (MAR) show qualitative improvements, but their algorithms have not found acceptance for clinical applications. We investigated to what extent metal artefacts interfere with the segmentation of lesions adjacent to a metal femoral implant and whether metal artefact reduction improves the manual segmentation of such lesions. MATERIALS AND METHODS: We manually created 27 periprosthetic lesions in 10 human cadaver femora. We filled the lesions with a fibrotic interface tissue substitute. Each femur was fitted with a polished tapered cobalt-chrome prosthesis and imaged twice--once with the metal, and once with a substitute resin prosthesis inserted. Metal-affected CTs were processed using standard back-projection as well as projection interpolation (PI) MAR. Two experienced users segmented all lesions and compared segmentation accuracy. RESULTS: We achieved accurate delineation of periprosthetic lesions in the metal-free images. The presence of a metal implant led us to underestimate lesion volume and introduced geometrical errors in segmentation boundaries. Although PI MAR reduced streak artefacts, it led to greater underestimation of lesion volume and greater geometrical errors than without its application. CONCLUSION: CT metal artefacts impair image segmentation. PI MAR can improve subjective image appearance but causes loss of detail and lower image contrast adjacent to prostheses. Our experiments showed that PI MAR is counterproductive for manual segmentation of periprosthetic lesions and should be used with care.

Cochlear reimplantation with same device: surgical and audiologic results.

OBJECTIVES/HYPOTHESIS: To study to what extent it is possible to achieve identical insertion depths and to maintain the same performance after cochlear reimplantation. STUDY DESIGN: Outcome research on a retrospective case series in a tertiary university referral center. METHODS: Data were collected for 12 adults and three children who underwent reimplantation during the last 3 years with a new HiRes90K device with HiFocus 1J electrode owing to failure of the feed-through seal. Multislice computed tomography scans were used to compare positions of the original and newly placed electrode arrays. The speech-perception scores on a consonant-vowel-consonant word test before and after reimplantation were compared. RESULTS: All reimplantations were successfully performed by two experienced cochlear implantation surgeons, and no complications were observed. Postoperative imaging showed that the average displacement of the new implant was only 0.59 mm. Reactivation of the implant gave immediate open set speech understanding in all patients, and speech perception rapidly returned to the previous level obtained with the original implant within weeks; it was even significantly better at the 3-month follow-up. No relation was found between changes in performance and the amount of displacement of the electrode array. CONCLUSIONS: After cochlear reimplantation with the same device, electrode-array position can be accurately replicated and speech perception can be regained or even improved within weeks.

Radiation exposure to patients in a multicenter coronary angiography trial (CORE 64).

OBJECTIVE: The objective of this study was to assess the exposure of patients to radiation for the cardiac CT acquisition protocol of the multicenter Coronary Artery Evaluation Using 64-Row Multidetector Computed Tomography Angiography (CORE 64) trial. MATERIALS AND METHODS: An algorithm for patient dose assessment with Monte Carlo dosimetry was developed for the Aquilion 64-MDCT scanner. During the CORE 64 study, different acquisition protocols were used depending on patient size and sex; therefore, six patient models were constructed representing three men and three women in the categories of small, normal size, and obese. Organ dose and effective dose resulting from the cardiac CT protocol were assessed for these six patient models. RESULTS: The average effective dose for coronary CT angiography (CTA) calculated according to Report 103 of the International Commission on Radiological Protection (ICRP) is 19 mSv (range, 16-26 mSv). The average effective dose for the whole cardiac CT protocol including CT scanograms, bolus tracking, and calcium scoring is slightly higher-22 mSv (range, 18-30 mSv). An average conversion factor for the calculation of effective dose from dose-length product of 0.030 mSv/mGy · cm was derived for coronary CTA. CONCLUSION: The current methods of assessing patient dose are not well suited for cardiac CT acquisitions, and published effective dose values tend to underestimate effective dose. The effective dose of cardiac CT is approximately 25% higher when assessed according to the preferred ICRP Report 103 compared with ICRP Report 60. Underestimation of effective dose by 43% or 53% occurs in coronary CTA according to ICRP Report 103 when a conversion factor (E / DLP, where E is effective dose and DLP is dose-length product) for general chest CT of 0.017 or 0.014 mSv/mGy · cm, respectively, is used instead of 0.030 mSv/mGy · cm.

Automated analysis of neuronal morphology, synapse number and synaptic recruitment.

The shape, structure and connectivity of nerve cells are important aspects of neuronal function. Genetic and epigenetic factors that alter neuronal morphology or synaptic localization of pre- and post-synaptic proteins contribute significantly to neuronal output and may underlie clinical states. To assess the impact of individual genes and disease-causing mutations on neuronal morphology, reliable methods are needed. Unfortunately, manual analysis of immuno-fluorescence images of neurons to quantify neuronal shape and synapse number, size and distribution is labor-intensive, time-consuming and subject to human bias and error. We have developed an automated image analysis routine using steerable filters and deconvolutions to automatically analyze dendrite and synapse characteristics in immuno-fluorescence images. Our approach reports dendrite morphology, synapse size and number but also synaptic vesicle density and synaptic accumulation of proteins as a function of distance from the soma as consistent as expert observers while reducing analysis time considerably. In addition, the routine can be used to detect and quantify a wide range of neuronal organelles and is capable of batch analysis of a large number of images enabling high-throughput analysis.

Assessment of Agatston coronary artery calcium score using contrast-enhanced CT coronary angiography.

OBJECTIVE: The purpose of this article is to evaluate to what extent Agatston scores may be derived from CT coronary angiography (CTA) examinations, compared with traditional unenhanced CT calcium scores. MATERIALS AND METHODS: Fifty patients with a CT calcium score-Agatston score of zero and 50 patients with a CT calcium score-Agatston score of 1 or greater whose CT calcium scores had been calculated and who had undergone CTA using volumetric 320-MDCT were included. Agatston scores were obtained at 3.0-mm slices for CT calcium score and CTA. Method agreement, interobserver agreement, and diagnostic performance of CTA for detecting coronary calcium were evaluated. RESULTS: Of 50 patients with a positive CT calcium score-Agatston score, coronary artery calcium was detected with CTA in 43 patients by observer 1 (mean CTA score, 102 ± 202; mean CT calcium score, 254 ± 501) and in 46 patients by observer 2 (mean CTA score, 94 ± 147; mean CT calcium score, 272 ± 531). Of the 50 patients with a CT calcium score-Agatston score of zero, 49 (98%, observer 1) and 50 (100%, observer 2) had a zero score with CTA as well. An intraclass correlation of 0.78 and 0.62 was found between CT calcium score and CTA (p < 0.01), whereas higher Agatston scores were underestimated with CTA. For observer 1, the sensitivity, specificity, positive predictive value, negative predictive value, and diagnostic accuracy for detection of coronary calcium with CTA were 86%, 98%, 98%, 88%, and 92%, respectively, and the corresponding values for observer 2 were 92%, 100%, 100%, 93%, and 96%, respectively. Interobserver agreement was 0.996 for CT calcium score and 0.93 for CTA. CONCLUSION: Coronary artery calcium can be detected on CTA images with high accuracy. The Agatston calcium score derived from CTA images shows good correlation with unenhanced CT calcium score and is highly reproducible. However, higher Agatston scores are systematically underestimated when derived from CTA images.

Cochlear coordinates in regard to cochlear implantation: a clinically individually applicable 3 dimensional CT-based method.

SETTING: Cochlear implant (CI)/tertiary referral center. SUBJECTS: Twenty-five patients implanted with an Advanced Bionics HiRes90K HiFocus1J CI. STUDY DESIGN/MAIN OUTCOME MEASURES: A 3-dimensional cylindrical coordinate system is introduced using the basal turn of the cochlea as the x and y planes and the center of the modiolus as the z axis. The 0-degree angle is defined by the most lateral point of the horizontal semicircular canal. It is applied to both preoperative and postoperative computed tomographies in 25 patients. The angular position of the round window is examined. Interobserver reproducibility is tested by localization of all electrode contacts within the coordinate system. To observe realignment over time, electrode coordinates in postoperative images were projected on preoperative images. Additionally, comparison to existing imaging-related coordinate systems was made. RESULTS: The angular position of the center of the round window is 34.6 +/- 0.4 degrees (standard deviation) with an intraclass coefficient of 1.00. The intraclass coefficient for interobserver reproducibility of the 16 electrode contacts ranged from 0.74 to 1 for the rotational angle (phi) and 0.77 to 1 for the distance to the modiolus (rho). In 21 of 25 patients, a perfect match or minimal displacement of up to 3 electrode contacts was seen. Comparison to existing systems showed good correlation. CONCLUSION: A 3-dimensional cochlear coordinate system easily applicable in clinical patients is described, which fulfills the requirements set by an international consensus.

Development and validation of segmentation and interpolation techniques in sinograms for metal artifact suppression in CT.

PURPOSE: Metal prostheses cause artifacts in computed tomography (CT) images. The purpose of this work was to design an efficient and accurate metal segmentation in raw data to achieve artifact suppression and to improve CT image quality for patients with metal hip or shoulder prostheses. METHODS: The artifact suppression technique incorporates two steps: metal object segmentation in raw data and replacement of the segmented region by new values using an interpolation scheme, followed by addition of the scaled metal signal intensity. Segmentation of metal is performed directly in sinograms, making it efficient and different from current methods that perform segmentation in reconstructed images in combination with Radon transformations. Metal signal segmentation is achieved by using a Markov random field model (MRF). Three interpolation methods are applied and investigated. To provide a proof of concept, CT data of five patients with metal implants were included in the study, as well as CT data of a PMMA phantom with Teflon, PVC, and titanium inserts. Accuracy was determined quantitatively by comparing mean Hounsfield (HU) values and standard deviation (SD) as a measure of distortion in phantom images with titanium (original and suppressed) and without titanium insert. Qualitative improvement was assessed by comparing uncorrected clinical images with artifact suppressed images. RESULTS: Artifacts in CT data of a phantom and five patients were automatically suppressed. The general visibility of structures clearly improved. In phantom images, the technique showed reduced SD close to the SD for the case where titanium was not inserted, indicating improved image quality. HU values in corrected images were different from expected values for all interpolation methods. Subtle differences between interpolation methods were found. CONCLUSIONS: The new artifact suppression design is efficient, for instance, in terms of preserving spatial resolution, as it is applied directly to original raw data. It successfully reduced artifacts in CT images of five patients and in phantom images. Sophisticated interpolation methods are needed to obtain reliable HU values close to the prosthesis.