Transfer accuracy of 3D printed versus CAD/CAM milled surgical guides for temporary orthodontic implants: A preclinical micro CT study.

OBJECTIVES: Temporary anchorage devices (TADs) have become an integral part of comprehensive orthodontic treatments. This study evaluated the transfer accuracy of three-dimensional (3D) printed and computer-aided design/computer-aided manufacturing (CAD/CAM) milled surgical guides for orthodontic TADs using micro-computed tomography (CT) imaging in a preclinical trial. METHODS: Overall, 30 surgical guides were used to place TADs into typodonts; 3D printing and CAD/CAM milling were used to produce the guides. The virtual target positions of the TADs were compared to the real positions in terms of spatial and angular deviations using digital superimposition. Micro-CT imaging was used to detect the positions. To evaluate reliability, two investigators collected the measurements twice. Intra-rater and inter-rater correlations were tested. RESULTS: In total, 60 palatal TADs were evaluated. The mean coronal deviations in the print group ranged from 0.15 ± 0.20 mm to 0.71 ± 0.22 mm, whereas in the mill group, they ranged from 0.09 ± 0.15 mm to 0.83 ± 0.23 mm. At the apical tip, the overall deviations in the print group ranged from 0.14 ± 0.56 mm to 1.27 ± 0.66 mm, whereas in the mill group, they ranged from 0.15 ± 0.57 mm to 1.09 ± 0.44 mm. The mean intra-class and inter-class correlation coefficients ranged from 0.904 to 0.987. No statistically significant differences were found between the groups. CONCLUSIONS: CAD/CAM milled guides yielded spatial and angular accuracies comparable to those of 3D printed guides with notable deviations in the vertical positioning of TADs. CLINICAL SIGNIFICANCE: Digital planning of orthodontic temporary implants combines clinical predictability and the safety of surrounding tissue. Therefore, the transfer accuracy of the guides is crucial. This preclinical study was the first to evaluate CAD/CAM milling for orthodontic guides and found its accuracy comparable to that of the current "gold standard".

Influence of malocclusion on OHRQoL in adolescents in initial orthodontic treatment phase.

OBJECTIVES: Besides correcting malocclusions, another main objective of orthodontic treatment is to improve patients' oral health-related quality of life (OHRQoL). This study aimed to assess changes in OHRQoL of children within the first six months of orthodontic therapy with fixed orthodontic appliances. METHODS: 85 patients aged 11 to 14 years requiring fixed orthodontic appliance therapy were included. The children completed the German version of the Child Perceptions Questionnaire (CPQ-G-11-14) before (T0), 1 month (T1) and 6 months (T2) after the start of orthodontic treatment. The type of malocclusion was categorized according to the Index of Orthodontic Treatment Need (IOTN). RESULTS: The initial type of malocclusion affected the children's OHRQoL, whereas gender and age did not. The IOTN dental health component (DHC) had a significant impact on the CPQ score (median CPQ of 15.00 for the group DHC 4 vs. 22.50 for DHC 5, p = 0.032). The onset of orthodontic treatment initially affected the CPQ domains "Oral symptoms" and "Functional limitations, with a change versus baseline of 2.00 (p = 0.001), but improved again after 6 months. Regression analysis demonstrated that children with an IOTN DHC 5 malocclusion experienced a greater impact on their ORHQoL, as indicated by a CPQ score 7.35 points higher than that of children with an IOTN DHC 4 malocclusion (p = 0.015). CONCLUSIONS: At the beginning of orthodontic treatment, the OHRQoL slightly worsens, probably due to the discomfort and appearance of the appliances. However, 6 months after the start of orthodontic treatment, OHRQoL improved again in patients with severe malocclusion (IOTN 4 and 5), and approached baseline values. CLINICAL RELEVANCE: The results help the clinician to better understand specific aspects of oral health that may be affected by different malocclusions, thereby improving the child's satisfaction and overall quality of life.

Difference in Buccal Gingival Thickness between the Mandible and Maxilla in the Aesthetic Zone: A Systematic Review and Meta-Analysis.

Background: Fragile gingival tissue is a risk factor for the development of gingival recessions. Despite the fact that gingival recessions are more commonly seen around anterior mandibular teeth, previous research has predominantly concentrated on the gingival dimensions in the anterior maxilla. The objective was to systematically compare buccal gingival thicknesses between the upper and lower jaws in individuals with healthy gingival conditions in the aesthetic zone. Methods: A comprehensive search of three databases was carried out until October 2023. Gingival thickness differences between the maxilla and mandible were evaluated by calculating the mean differences along with the corresponding 95% confidence interval (CI). Subgroup analysis was conducted based on the measurement area, measurement method, and tooth category. Results: A total of seventeen studies were included in this systematic review. Eleven studies were included in the quantitative analysis. Quantitative analysis comparing gingival thickness around 2100 teeth in the anterior mandible to 2056 teeth in the anterior maxilla revealed a statistically significant thinner buccal gingiva in the mandible (mean difference: 0.16 mm; 95% CI [-0.24, -0.07]; p = 0.0003). Conclusions: The present systematic review revealed a more delicate buccal gingiva in the anterior mandible. However, further scientific validation is required due to the considerable heterogeneity in study design and the potential presence of confounding variables.

Effects of the Saliva of Patients Undergoing Orthodontic Treatment with Invisalign and Brackets on Human Gingival Fibroblasts and Oral Epithelial Cells.

The transient worsening of oral health sometimes accompanies orthodontic treatment (OT), and the extent of this effect might depend on whether the patients are treated with traditional brackets or clear aligners. Saliva is an important tool for monitoring oral health and influences the functional properties of various oral cells. This study aimed to compare the effects of saliva from patients undergoing OT with Invisalign aligners and brackets on human gingival fibroblasts and oral epithelial cells in vitro. Unstimulated saliva was collected from 15 patients treated with Invisalign and 16 patients treated with brackets before and 3 and 6 months after therapy began. The saliva was used to stimulate primary human gingival fibroblasts and the oral epithelial Ca9-22 cell line, and the resulting cell response was investigated. Saliva did not exhibit any toxic effect on investigated cells, as shown by the proliferation/viability assay with the MTT method. In human gingival fibroblasts, saliva increased gene expression of various proinflammatory mediators, such as interleukin (IL)-6, IL-8, and monocyte chemoattractant protein-1, assessed by qPCR. In epithelial cells, saliva increased the production of IL-8 measured by ELISA and decreased gene expression of various proteins involved in the barrier function. During the therapy, the saliva-induced production of IL-8 tended to be decreased, and the saliva-induced decrease in the expression of barrier protein was partially improved. No difference between aligners and brackets was observed in either cell type. Saliva affects the functional properties of oral cells, but this effect is not influenced by the type of OT.

A novel approach for gingiva thickness measurements around lower anterior teeth by means of dental magnetic resonance imaging.

OBJECTIVE: This diagnostic accuracy study aims to present the first measurements of gingiva thickness around lower anterior teeth using dental magnetic resonance imaging (MRI) and to compare these measurements with two established methods: (1) gingival phenotype assessment via periodontal probing, and (2) the superimposition of cone-beam computed tomography (CBCT) scans with intraoral scans of teeth and gums. MATERIALS AND METHODS: Ten patients with substantial orthodontic treatment need and anterior mandibular crowding were consecutively included in this clinical case series. After periodontal probing, each patient underwent a CBCT scan, an intraoral scan of the mandible, and an MRI investigation using a novel mandibula 15-channel dental coil. RESULTS: The mean gingiva thickness was 0.72 mm measured on MRI and 0.97 mm measured on CBCT, with a mean difference between the measurement methods of 0.17 ± 0.27 mm (p < 0.001). Measurement agreement between the index tests (MRI and CBCT) and the clinical reference standard (probing) yielded an overall percent agreement of 64.94% and 47.02% for MRI and CBCT, respectively. Teeth with thin phenotypes were associated with lower soft tissue dimensions in both free (MRI: 0.56 mm vs. CBCT: 0.79 mm) and supracrestal gingiva (MRI: 0.75 mm vs. CBCT: 1.03 mm) when compared to those with thick phenotypes. However, only the measurements obtained from MRI scans showed statistically significant differences between the two phenotypes. CONCLUSION: Dental MRI successfully visualizes delicate structures like the gingiva in the anterior mandible and achieves a high correlation with superimposed CBCT scans, with clinically acceptable deviations. CLINICAL RELEVANCE: The present study helps to establish dental MRI as a radiation-free alternative to conventional radiographic methods.

3D printed indirect bonding trays: Transfer accuracy of hard versus soft resin material in a prospective, randomized, single-blinded clinical study.

OBJECTIVES: This prospective clinical study aimed to compare transfer accuracy and immediate loss rate of hard versus soft transfer trays utilizing a CAD/CAM workflow. METHODS: We performed virtual bracket placement on intraoral scans of adolescent patients to create individual indirect bonding trays. Orthodontic software (Appliance Designer, 3Shape, Copenhagen, Denmark) was used to design the trays, which were then produced using 3D printing technology. Patients were randomly assigned to the hard or soft resin groups with a 1:1 allocation. Subgroups were determined based on the Little's Irregularity Index and distributed equally. RESULTS: 552 brackets were bonded onto adolescent patients using 46 CAD/CAM indirect bonding trays. The linear mean transfer errors ranged from -0.011 mm (soft) to -0.162 mm (hard) and angularly -0.255° (hard) and -0.243° (soft). No statistically significant differences were found between the subgroups or soft and hard resin groups. However, the transfer accuracy of molar brackets was significantly lower in the transversal and horizontal directions. All mean transfer errors were within the limits of clinical acceptability. The loss rate was 2.4 % in the hard resin group and 2.3 % in the soft resin group. The Intra Observer Correlation was excellent. SIGNIFICANCE: CAD/CAM technology for indirect bracket bonding has been proven reliable in a randomized clinical trial. Both hard and soft resin showed a low rate of immediate loss compared to the current literature. Soft resin was more favorable than hard resin in terms of accuracy and usability. However, the indirect bonding of molar brackets is significantly less accurate than incisor brackets.

CAD/CAM indirect bonding trays using hard versus soft resin material: a single-blinded in vitro study.

OBJECTIVES: The present in vitro study aimed to evaluate the accuracy of three-dimensional (3D) printed indirect bonding trays consisting of hard or soft resin materials produced using computer-aided design and manufacturing (CAD/CAM). METHODS: Forty-eight dental casts were 3D printed. Four groups based on frontal crowding were defined and divided into hard- and soft-resin groups. After virtual bracket positioning on the digital models, the transfer trays were 3D printed. To evaluate the accuracy of the procedure, measurements were performed using a digital overlay of the virtual (target) bracket position and a post-bonding scan. The horizontal, transverse, and vertical deviations and angular discrepancies were analyzed. The loss rate was evaluated descriptively as a percentage. RESULTS: A total of 553 brackets were bonded using 24 soft and 24 resilient indirect bonding trays. The mean deviations were of 0.05 mm (transversal), 0.05 mm (horizontal), 0.09 mm (vertical), 0.13° (angulation) in the resilient resin group and of 0.01 mm (transversal), 0.08 mm (horizontal), 0.08 mm (vertical), 0.37° (angular) in the soft resin group. The loss rate was 6.9% and 0.7% in the hard and soft resin groups, respectively. Angular deviations were significantly higher in the soft resin group (P = 0.009), whereas the loss rate was considerably higher in the hard resin group (P < 0.001). SIGNIFICANCE: The findings indicate that indirect bonding using CAD/CAM is an accurate procedure in the laboratory setting. Soft resins are considered favorable for loss rate and useability.

Differential gene expression and protein-protein interaction networks of human periodontal ligament stromal cells under mechanical tension.

Orthodontic treatment is based on complex strategies and takes up to years until a desired therapeutic outcome is accomplished, implying long periods of high costs and discomfort for the patient. Choosing the optimal settings for force intensities in the initial phase of orthodontic tooth movement is the key to successful orthodontic treatment. It is known that orthodontic tooth movement is mainly mediated by tensile and compressive forces that are communicated to the alveolar bone via the periodontal ligament. While the revelation of the complex molecular network was already approached by transcriptomic analysis of compressed periodontal ligament cells, the entity of molecular key players activated by tensile forces remains elusive. Therefore, the aim of this study was to assess the effect of mechanical tensile forces on the gene expression profile of human primary periodontal ligament stromal cells, mimicking the initial phase of orthodontic tooth movement. A transcriptomic analysis of tension-treated and untreated periodontal ligament stromal cells yielded 543 upregulated and 793 downregulated differentially expressed genes. Finally, six highly significant genes were found in the transcriptome that are related to biological processes with relevance to orthodontic tooth movement, including apelin, fibroblast growth factor receptor 2, noggin, sulfatase 1, secreted frizzled-related protein 4 and stanniocalcin 1. Additionally, differences of gene expression profiles between individual cell donors showed a high effect size. Closer understanding of the roles of the identified candidates in the initial phase of orthodontic tooth movement could help to clarify the underlying mechanisms, which will be essential for the development of personalized treatment strategies in orthodontics.

Maxillary lateral incisor agenesis is associated with maxillary form: a geometric morphometric analysis.

BACKGROUND AND OBJECTIVE: Agenesis of the maxillary lateral incisor occurs in up to 4% of all individuals and requires multidisciplinary treatment. Its developmental origins, however, are not fully understood. Earlier studies documented genetic factors contributing to agenesis but also an association with craniofacial morphology. In this study, we assessed the association between maxillary morphology and lateral incisor agenesis by a geometric morphometric approach to disentangle the roles of developmental plasticity and genetic factors. MATERIALS AND METHODS: We quantified the maxillary alveolar ridge by 19 two-dimensional landmarks on cross-sectional images of 101 computed tomography scans. We compared the shape and size of the alveolar ridge across patients with unilateral or bilateral agenesis of maxillary lateral incisors and patients with extracted or in situ incisors. RESULTS: The maxillary alveolar ridge was clearly narrower in patients with agenesis or an extracted incisor compared to the control group, whereas the contralateral side of the unilateral agenesis had an intermediate width. Despite massive individual variation, the ventral curvature of the alveolar ridge was, on average, more pronounced in the bilateral agenesis group compared to unilateral agenesis and tooth extraction. CONCLUSIONS: This suggests that pleiotropic genetic and epigenetic factors influence both tooth development and cranial growth, but an inappropriately sized or shaped alveolar process may also inhibit normal formation or development of the tooth bud, thus leading to dental agenesis. CLINICAL RELEVANCE: Our results indicate that bilateral agenesis of the lateral incisor tends to be associated with a higher need of bone augmentation prior to implant placement than unilateral agenesis.

Static mandibular condyle positions studied by MRI and condylar position indicator.

We compared mandibular condyle positions as determined by magnetic resonance imaging (MRI) and a mechanical device, the condylar position indicator (CPI). Both methods assessed 3 mandibular positions in 10 asymptomatic males and 10 asymptomatic females, aged 23 to 37 years, free from temporomandibular disorders: maximum intercuspation, bimanually manipulated centric relation, and the unguided neuromuscular position. Bite registrations were obtained for bimanual operator guidance and neuromuscular position. 3 T MRI scans of both temporomandibular joints produced 3D data of the most superior condylar points in all 3 mandibular positions. Using mounted plaster casts and the same bite registrations, an electronic CPI displayed 3D data of its condylar spheres in these positions. The results showed interclass correlation coefficients ranging from 0.03 to 0.66 (95% confidence intervals from 0 to 0.8) and significantly different condyle positions between both methods (p = 0.0012, p < 0.001). The implications of the study emphasize that condyle position is unpredictable and variable. Its exact knowledge requires radiological imaging and should not rely on CPI assessments.

Effect of Titanium and Zirconia Nanoparticles on Human Gingival Mesenchymal Stromal Cells.

Nano- and microparticles are currently being discussed as potential risk factors for peri-implant disease. In the present study, we compared the responses of human gingival mesenchymal stromal cells (hG-MSCs) on titanium and zirconia nanoparticles (<100 nm) in the absence and presence of Porphyromonas gingivalis lipopolysaccharide (LPS). The primary hG-MSCs were treated with titanium and zirconia nanoparticles in concentrations up to 2.000 µg/mL for 24 h, 72 h, and 168 h. Additionally, the cells were treated with different nanoparticles (25−100 µg/mL) in the presence of P. gingivalis LPS for 24 h. The cell proliferation and viability assay and live−dead and focal adhesion stainings were performed, and the expression levels of interleukin (IL)-6, IL-8, and monocyte chemoattractant protein (MCP)-1 were measured. The cell proliferation and viability were inhibited by the titanium (>1000 µg/mL) but not the zirconia nanoparticles, which was accompanied by enhanced apoptosis. Both types of nanoparticles (>25 µg/mL) induced the significant expression of IL-8 in gingival MSCs, and a slightly higher effect was observed for titanium nanoparticles. Both nanoparticles substantially enhanced the P. gingivalis LPS-induced IL-8 production; a higher effect was observed for zirconia nanoparticles. The production of inflammatory mediators by hG-MSCs is affected by the nanoparticles. This effect depends on the nanoparticle material and the presence of inflammatory stimuli.

MMPs and TIMPs Expression Levels in the Periodontal Ligament during Orthodontic Tooth Movement: A Systematic Review of In Vitro and In Vivo Studies.

Background: During orthodontic tooth movement (OTM), applied orthodontic forces cause an extensive remodeling of the extracellular matrix (ECM) in the periodontal ligament (PDL). This is mainly orchestrated by different types of matrix metalloproteinases (MMPs) and their tissue inhibitors of matrix metalloproteinases (TIMPs), which are both secreted by periodontal ligament (PDL) fibroblasts. Multiple in vitro and in vivo studies already investigated the influence of applied orthodontic forces on the expression of MMPs and TIMPs. The aim of this systematic review was to explore the expression levels of MMPs and TIMPs during OTM and the influence of specific orthodontic force-related parameters. Methods: Electronic article search was performed on PubMed and Web of Science until 31 January 2021. Screenings of titles, abstracts and full texts were performed according to PRISMA, whereas eligibility criteria were defined for in vitro and in vivo studies, respectively, according to the PICO schema. Risk of bias assessment for in vitro studies was verified by specific methodological and reporting criteria. For in vivo studies, risk of bias assessment was adapted from the Joanna Briggs Institute Critical Appraisal Checklist for analytical cross-sectional study. Results: Electronic article search identified 3266 records, from which 28 in vitro and 12 in vivo studies were included. The studies showed that orthodontic forces mainly caused increased MMPs and TIMPs expression levels, whereas the exact effect may depend on various intervention and sample parameters and subject characteristics. Conclusion: This systematic review revealed that orthodontic forces induce a significant effect on MMPs and TIMPs in the PDL. This connection may contribute to the controlled depletion and formation of the PDLs' ECM at the compression and tension site, respectively, and finally to the highly regulated OTM.

Interleukin-1ß Induced Matrix Metalloproteinase Expression in Human Periodontal Ligament-Derived Mesenchymal Stromal Cells under In Vitro Simulated Static Orthodontic Forces.

The periodontal ligament (PDL) responds to applied orthodontic forces by extracellular matrix (ECM) remodeling, in which human periodontal ligament-derived mesenchymal stromal cells (hPDL-MSCs) are largely involved by producing matrix metalloproteinases (MMPs) and their local inhibitors (TIMPs). Apart from orthodontic forces, the synthesis of MMPs and TIMPs is influenced by the aseptic inflammation occurring during orthodontic treatment. Interleukin (IL)-1ß is one of the most abundant inflammatory mediators in this process and crucially affects the expression of MMPs and TIMPs in the presence of cyclic low-magnitude orthodontic tensile forces. In this study we aimed to investigate, for the first time, how IL-1ß induced expression of MMPs, TIMPs and how IL-1ß in hPDL-MSCs was changed after applying in vitro low-magnitude orthodontic tensile strains in a static application mode. Hence, primary hPDL-MSCs were stimulated with IL-1ß in combination with static tensile strains (STS) with 6% elongation. After 6- and 24 h, MMP-1, MMP-2, TIMP-1 and IL-1ß expression levels were measured. STS alone had no influence on the basal expression of investigated target genes, whereas IL-1ß caused increased expression of these genes. In combination, they increased the gene and protein expression of MMP-1 and the gene expression of MMP-2 after 24 h. After 6 h, STS reduced IL-1ß-induced MMP-1 synthesis and MMP-2 gene expression. IL-1ß-induced TIMP-1 gene expression was decreased by STS after 6- and 24-h. At both time points, the IL-1ß-induced gene expression of IL-1ß was increased. Additionally, this study showed that fetal bovine serum (FBS) caused an overall suppression of IL-1ß-induced expression of MMP-1, MMP-2 and TIMP-1. Further, it caused lower or opposite effects of STS on IL-1ß-induced expression. These observations suggest that low-magnitude orthodontic tensile strains may favor a more inflammatory and destructive response of hPDL-MSCs when using a static application form and that this response is highly influenced by the presence of FBS in vitro.

Salivary MRP-8/14 and the presence of periodontitis-associated bacteria in children with bonded maxillary expansion treatment.

OBJECTIVES: The aim of this study was to investigate changes in saliva concentration of the inflammatory marker MRP-8/14 and the presence of some periodontitis-associated bacteria in patients with mixed dentition treated with a rigid acrylic, bonded maxillary expander. METHODS: Fifteen patients in mixed dentition treated with a bonded palatal expander were enrolled in this longitudinal study. Saliva samples were taken before the therapy, as well as in 2 weeks and 3, 6, 9, and 12 months after the beginning of the therapy. In each sample, the levels of MRP-8/14 were determined by ELISA and the presence of 11 bacteria was detected by PCR followed by DNA-DNA hybridization. RESULTS: Salivary concentration of MRP-8/14 and the amount of Tannerella forsythia, Treponema denticola, and Eikenella corrodens were significantly increased during treatment with bonded maxillary expander. These changes were transient and the maximal levels of MRP-8/14 and periodontitis-associated pathogens were observed 6-9 months after the beginning of the therapy. CONCLUSION: Therapy with bonded maxillary results in higher MRP-8/14 levels and increased prevalence of some periodontitis-associated bacteria, namely T. forsythia, T. denticola, and E. corrodens. The results suggest the detection of salivary MRP-8/14 levels may be a potential tool to reflect the oral health status in children with fixed orthodontic treatment. CLINICAL RELEVANCE: Our data suggest that the treatment with bonded maxillary expander might influence the oral health status and should be accompanied by the careful control of the oral health during the therapy.

Behaviour of Human Oral Epithelial Cells Grown on Invisalign® SmartTrack® Material.

Invisalign aligners have been widely used to correct malocclusions, but their effect on oral cells is poorly known. Previous research evaluated the impact of aligners' eluates on various cells, but the cell behavior in direct contact with aligners is not yet studied. In the present study, we seeded oral epithelial cells (cell line Ca9-22) directly on Invisalign SmartTrack material. This material is composed of polyurethane and co-polyester and exhibit better mechanical characteristics compared to the predecessor. Cell morphology and behavior were investigated by scanning electron microscopy and an optical cell moves analyzer. The effect of aligners on cell proliferation/viability was assessed by cell-counting kit (CCK)-8 and 3,4,5-dimethylthiazol-2-yl-2,5-diphenyl tetrazolium bromide (MTT) assay and live/dead staining. The expression of inflammatory markers and proteins involved in epithelial barrier function was measured by qPCR. Cells formed cluster-like structures on aligners. The proliferation/viability of cells growing on aligners was significantly lower (p < 0.05) compared to those growing on tissue culture plastic (TCP). Live/dead staining revealed a rare occurrence of dead cells on aligners. The gene expression level of all inflammatory markers in cells grown on aligners' surfaces was significantly increased (p < 0.05) compared to cells grown on TCP after two days. Gene expression levels of the proteins involved in barrier function significantly increased (p < 0.05) on aligners' surfaces after two and seven days of culture. Aligners' material exhibits no cytotoxic effect on oral epithelial cells, but alters their behavior and the expression of proteins involved in the inflammatory response, and barrier function. The clinical relevance of these effects has still to be established.

Comparison of Skeletal and Dental Reference Planes with the Hamulus-Incisive-Papilla Plane: A Pilot Study on 3D Reconstructed Tomographies of the Skull.

PURPOSE: The aim of this study was to investigate the hamulus-incisive-papilla (HIP) plane as an alternative for transferring the three-dimensional position of a patient's maxilla to an articulator. MATERIALS AND METHODS: Camper, Frankfurt horizontal, occlusal, and HIP planes were evaluated in 21 patients' computed tomography scans and compared to one another. RESULTS: Analysis of variance showed significant differences between all planes, with the HIP plane being closest to the occlusal plane (HIP-OP: 0.6 ± 4.0 degrees). Frankfurt and Camper planes, being more peripheral, showed higher geometric asymmetries. CONCLUSION: The HIP plane, when used for articulator mounting, results in a closer and more technically reliable patient relationship in a clinical and laboratory context.

Effect of tyrosine-rich amelogenin peptide on behavior and differentiation of endothelial cells.

BACKGROUND: Enamel matrix derivative (EMD) is an effective biomaterial for periodontal tissue regeneration and might stimulate angiogenesis. Tyrosine-rich amelogenin peptide (TRAP) is present in EMD and is thought to contribute in its biological activity. In the present study, we investigated the effect of chemically synthesized TRAP on proliferation, migration, angiogenic structure formation, and differentiation of human umbilical vein endothelial cells (HUVECs) in vitro. MATERIAL AND METHODS: The effects of TRAP isolated from EMD and chemically synthesized TRAP on proliferation/viability, migration, and angiogenic structure formation were investigated. Expression of angiopoietin-2 (ang-2), von Willebrand factor (vWF), E-selectin, intracellular adhesion molecules 1 (ICAM-1), vascular endothelial growth factor (VEGF) receptors FMS-like tyrosine kinase 1 (FLT-1), and kinase insert domain receptor (KDR) was measured on both messenger RNA (mRNA) and protein levels. RESULTS: The proliferation/viability of HUVECs was inhibited by TRAP at concentration of 100 µg/ml and slightly stimulated by EMD at similar concentration. Both EMD and TRAP stimulated endothelial cell migration in microchemotaxis chamber. The effect of both TRAP preparations on the migration was significantly higher than that of EMD. All substances stimulated formation of angiogenic structure in vitro. The expression of ICAM-1, E-selectin, FLT-1, KDR, and vWF was significantly increased by both TRAP and EMD at a concentration 50 µg/ml. The expression of ang-2 was not affected by TRAP but was significantly increased by EMD. CONCLUSION: Our in vitro study shows that TRAP confer the most effects of EMD on the endothelial cells. CLINICAL RELEVANCE: TRAP might be used as a basis for development of new approaches for periodontal regeneration.

Rebonding performance of different ceramic brackets conditioned with a new silane coupling agent.

The objective of this study was to investigate the rebonding effect of a new silane coupling agent on various ceramic brackets bonded to ceramic specimen. Different ceramic brackets (Fascination 2, Clarity SL, and In-OvationC) were assigned to three groups: rebonding with new silane coupling agent, rebonding with conventional silane coupling agent, or regular bonding as control (n = 16). Bracket adhesion was calculated with a shear test in a universal testing machine. The bracket-composite-ceramic interface was evaluated using the adhesive remnant index score. One-way analysis of variance was applied for inferential statistics. Rebonding with the new silane coupling agent resulted in high shear bond strengths (SBSs; mean values: 37.44-41.24 MPa) and ceramic specimen fractures. Rebonding with the conventional silane coupling agent resulted in significantly (P < 0.001) lower clinically adequate SBS (mean values: 20.20-29.92 MPa) with the least ceramic specimen fractures. Regularly bonded ceramic brackets resulted in clinically adequate to high SBS (mean values: 17.06-41.56 MPa) depending on their bracket base design. Rebonded ceramic brackets showed sufficient SBS to ceramic specimen surfaces. However, increased bracket adhesion was associated with a risk of ceramic specimen surface damage. Therefore, ceramic brackets rebonded with the new silane coupling should be debonded cautiously using alternative debonding methods.

Left/right asymmetries and open/closed differences of interdental forces in the mandible.

The aim of the present investigation was to study the variation in interdental forces between mandibular canines and lateral incisors of 19 volunteers (9 males and 10 females) aged 20-26 years for four configurations (mandible open/closed and left/right side). These forces were derived by pulling a stainless steel matrix strip between these teeth, six times per configuration, and registering the time variation with a high-resolution transducer. The repeated median smoothing algorithm was applied to find the maximum of each curve and a bootstrap method estimated the 95 per cent confidence intervals (CIs) for all 76 configurations. Seventy-six per cent of all paired force differences were found to be significant. Asymmetry phenomena were observed: the interdental forces differed significantly between the left and right sides and also between the open and closed position of the mandible. The interdental forces (4-21 N) showed a pattern modulated by volunteer-specific features: in 91 per cent of the configurations, the interdental forces were larger when the mouth was open. This observed pattern contributes to the instability observed in clinical practice, thus necessitating permanent fixed lower retainer wear.

Shear bond strength of fluoride-releasing orthodontic bonding and composite materials.

Several fluoride-releasing bonding materials are available for orthodontic bracket placement. These are supposed to prevent white spot lesions during therapy. The objectives of this in vitro study were to evaluate the shear bond strength (SBS) and failure mode of a recently introduced fluoride-releasing adhesive, as well as the comparison with established orthodontic adhesives. Sixty bovine mandibular incisors were randomly allocated to three groups (n = 20): stainless steel brackets were bonded with Transbond Plus Color Change Adhesive, Transbond XT, or Light Bond. A universal testing machine was used to determine the SBS at a crosshead speed of 1 mm/minute. After debonding, the adhesive remnant index (ARI) was used to assess the adhesive remaining on the brackets. One-way analysis of variance comparing the three experimental groups showed no differences between the bonding systems for mean SBS (P = 0.27). ARI scores showed more residual adhesive on the teeth bonded with the Transbond systems (P < 0.01). As the fluoride-releasing bonding system provided sufficient mean bond strength in vitro (19.9 MPa), it may be used as an additional prophylactic measure in orthodontic therapy. However, the clinical effectiveness of its fluoride release may be questionable, as the amount of fluoride required from a bonding material to be caries preventive is still unknown.