RESUMEN
In this study, the ability of the highly scalable metal-organic framework (MOF) CALF-20 to adsorb polar and non-polar gases at low pressure was investigated using grand canonical Monte Carlo (GCMC) and molecular dynamics (MD) simulations. The results from the simulated adsorption isotherms revealed that the highest loading was achieved for SO2 and Cl2, while the lowest loading was found for F2 molecules. The analysis of interaction energies indicated that SO2 molecules were able to form the strongest adsorbent-adsorbate interactions and had a tight molecular packing due to their polarity and angular structure. Additionally, Cl2 gas was found to be highly adsorbed due to its large van der Waals surface and strong chemical affinity in CALF-20 pores. MD simulations showed that SO2 and Cl2 had the lowest mobility inside CALF-20 pores. The values of the Henry coefficient and isosteric heat of adsorption confirmed that CALF-20 could selectively adsorb SO2 and Cl2. Based on the results, it was concluded that CALF-20 is a suitable adsorbent for SO2 and Cl2 but not for F2. This research emphasizes the importance of molecular size, geometry, and polarity in determining the suitability of a porous material as an adsorbent for specific adsorbates.
RESUMEN
The separation of CO2 from gas streams is a central process to close the carbon cycle. Established amine scrubbing methods often require hot water vapour to desorb the previously stored CO2. In this work, the applicability of MFI membranes for H2O/CO2 separation is principally demonstrated by means of realistic adsorption isotherms computed by configurational-biased Monte Carlo (CBMC) simulations, then parameters such as temperatures, pressures and compositions were identified at which inorganic membranes with high selectivity can separate hot water vapour and thus make it available for recycling. Capillary condensation/adsorption by water in the microporous membranes used drastically reduces the transport and thus the CO2 permeance. Thus, separation factors of αH2O/CO2 = 6970 could be achieved at 70 °C and 1.8 bar feed pressure. Furthermore, the membranes were tested for stability against typical amines used in gas scrubbing processes. The preferred MFI membrane showed particularly high stability under application conditions.
RESUMEN
Herein, two sunlight responsive photocatalysts including TiO2 nanoparticles (NPs) and TiO2/graphene quantum dots (GQDs) nanocomposite for degrading a textile dye, Reactive Black 5 (RB5), were prepared. The results showed that 100% of 50 ppm RB5 could be degraded by TiO2 NPs and TiO2/GQDs within 60 and 30 min sunlight irradiation, respectively. Hence, much better photocatalytic activity in degradation of RB5 was achieved by TiO2/GQDs under sunlight irradiation compared with pure TiO2 NPs due to its lower band gap (2.13 eV) and electron/hole recombination rate. The photocatalytic degradation mechanism of RB5 by TiO2 NPs was elucidated by adding some scavengers to the solution. The main reactive species contributing to RB5 degradation were surface hydroxyl radicals. The first-order solar degradation rate constant of RB5 for TiO2/GQDs is greater than that of TiO2 NPs under sunlight illumination.
RESUMEN
In this work, the temperature-dependent solvation behavior of a number of important light gases, such as carbon dioxide, xenon, krypton, argon, oxygen, methane, nitrogen, neon, and hydrogen, in two important imidazolium-based ionic liquids (ILs) of the type 1-n-alkyl-3-methylimidazolium hexafluorophosphate ([Cnmim][PF6]) and 1-n-alkyl-3-methylimidazolium tetrafluoroborate ([CnmimBF4]) with varying chain lengths (n = 2, 4, 6, and 8) are investigated using molecular dynamics simulations for a temperature range between 300 and 500 K at a pressure of 1 bar. The aim of this work is first to propose a reliable estimate for the temperature-dependent solubility behavior of (very) light gases, e.g., hydrogen and nitrogen, where reported experimental data are inconsistent. Moreover, we would like to rationalize the common features of the temperature-dependent solvation of light gases for various imidazolium-based ionic liquids. For the selected solute gases in our simulated imidazolium-based ILs, we applied the potential distribution theorem using both Bennet's overlapping distribution method (ODM) and Widom's particle insertion technique to determine the temperature-dependent solvation free energies with good statistical accuracy. We observed from the simulations that the quantity of the solvation free energy of a gas molecule and its temperature derivatives are connected in regard to each other at a chosen reference temperature. This trend was observed for all the studied light gases. Moreover, the computed solvation enthalpies of all gases obey an enthalpy-entropy compensation behavior, which is almost identical for all the studied ILs. Based on this observation, we report a correlation between the temperature-dependent solubility behavior of light gases in various ILs at their reference state so that we are now able to semiquantitively predict the temperature-dependent solubility behavior of a certain gas in various imidazolium-based ionic liquids based on a single solubility value of that gas in one of the ILs at a certain temperature.
RESUMEN
Due to the high demand for clean, economic, and recyclable energy, phase change materials (PCMs) have received significant attention in recent years. To improve the performance of PCMs, they are confined in micro- and nano-capsules composed of organic or inorganic materials. In this study, encapsulated phase change material (EPCM) systems were constructed with paraffin molecules as the core material and capped carbon nanotubes (CNTs) as the shell. We investigated the effects of different parameters including CNT diameter, length, and chirality and the length of the alkane molecule chain. We also investigated metal nanocluster-enhanced PCM systems via the addition of Cu, Ag, and Al clusters to the EPCM systems. Different thermodynamic, dynamic, and structural properties including configurational energy, melting range, mean square displacement, self-diffusion coefficient, radial distribution function (RDF), and average end-to-end distance of the confined molecules were examined. We also investigated the effect of metal doping in CNT on the different properties of the confined PCM. The results indicated that a longer CNT has a lower melting point than the normal CNT system. It was also observed that the bigger (30,0) CNT, (14,14) armchair CNT, and icosane systems have higher melting ranges than the normal (25,0) system. The metal cluster systems also have a lower starting melting point than the normal system. Furthermore, it was found that the Al cluster system has the lowest starting melting point among the studied systems.
RESUMEN
For the first time, zinc oxide nanoparticles have been synthesized by the sonochemical method in an ionic liquid, 1-hexyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide, liquid [hmim][NTf(2)] as a solvent. The morphology and structure of ZnO nanoparticles have been characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). A possible mechanism is proposed to explain the formation of ZnO nanostructures.