An interlaboratory capillary zone electrophoresis-UV study of various monoclonal antibodies, instruments, and ε-aminocaproic acid lots.

Capillary zone electrophoresis ultraviolet (CZE-UV) has become increasingly popular for the charge heterogeneity determination of mAbs and vaccines. The ε-aminocaproic acid (eACA) CZE-UV method has been used as a rapid platform method. However, in the last years, several issues have been observed, for example, loss in electrophoretic resolution or baseline drifts. Evaluating the role of eACA on the reported issues, various laboratories were requested to provide their routinely used eACA CZE-UV methods, and background electrolyte compositions. Although every laboratory claimed to use the He et al. eACA CZE-UV method, most methods actually deviate from He's. Subsequently, a detailed interlaboratory study was designed wherein two commercially available mAbs (Waters' Mass Check Standard mAb [pI 7] and NISTmAb [pI 9]) were provided to each laboratory, along with two detailed eACA CZE-UV protocols for a short-end, high-speed, and a long-end, high-resolution method. Ten laboratories participated each using their own instruments, and commodities, showing excellence method performance (relative standard deviations [RSDs] of percent time-corrected main peak areas from 0.2% to 1.9%, and RSDs of migration times from 0.7% to 1.8% [n = 50 per laboratory], analysis times in some cases as short as 2.5 min). This study clarified that eACA is not the main reason for the abovementioned variations.

Capillary and microchip electrophoresis method development for amino acid monitoring during biopharmaceutical cultivation.

The increased use of biopharmaceuticals calls for improved means of bioprocess monitoring. In this work, capillary electrophoresis (CE) and microchip electrophoresis (MCE) methods were developed and applied for the analysis of amino acids (AAs) in cell culture supernatant. In samples from different days of a Chinese hamster ovary cell cultivation process, all 19 proteinogenic AAs containing primary amine groups could be detected using CE, and 17 out of 19 AAs using MCE. The relative concentration changes in different samples agreed well with those measured by high-performance liquid chromatography (HPLC). Compared to the more commonly employed HPLC analysis, the CE and MCE methods resulted in faster analysis, while significantly lowering both the sample and reagent consumption, and the cost per analysis.

Method development for mono- and disaccharides monitoring in cell culture medium by capillary and microchip electrophoresis.

The rapidly growing, competitive biopharmaceutical market requires tight bioprocess monitoring. An integrated, automated platform for the routine online/at-line monitoring of key factors in the cell culture medium could greatly improve process monitoring. Mono- and disaccharides, as the main energy and carbon source, are one of these key factors. A CE-LIF method was developed for the analysis of several mono- and disaccharides, considering requirements and restrictions for analysis in an integrated, automated monitoring platform, such as the possibility for miniaturization to microchip electrophoresis. Analysis was performed after fluorescent derivatization with 8-aminopyrene-1,3,6-trisulfonic acid. The derivatisation reaction and the separation BGE were optimized using design of experiments. The developed method is applicable to the complex matrix of cell culture medium and proved transferable to microchip electrophoresis.

Analytical survey of tattoo inks-A chemical and legal perspective with focus on sensitizing substances.

BACKGROUND: Tattoo inks have been reported to elicit allergic contact dermatitis. OBJECTIVES: To investigate the labels and the contents of metals and pigments in tattoo inks, considering restrictions within the European Union. METHODS: Seventy-three tattoo inks currently available on the market, either bought or donated (already used), were investigated for trace metals and pigments by inductively coupled plasma mass spectrometry and by matrix-assisted laser desorption/ionization time of flight tandem mass spectrometry. RESULTS: Ninety-three percent of the bought tattoo inks violated European, legal requirements on labeling. Fifty percent of the tattoo inks declared at least one pigment ingredient incorrectly. Sixty-one percent of the inks contained pigments of concern, especially red inks. Iron, aluminium, titanium, and copper (most in green/blue inks) were the main metals detected in the inks. The level of metal impurities exceeded current restriction limits in only a few cases. Total chromium (0.35-139 µg/g) and nickel (0.1-41 µg/g) were found in almost all samples. The levels of iron, chromium, manganese, cobalt, nickel, zinc, lead, and arsenic were found to covary significantly. CONCLUSIONS: To prevent contact allergy and toxic reactions among users it is important for tattoo ink manufacturers to follow the regulations and decrease nickel and chromium impurities.

Implementation of a ultraviolet area imaging detector for analysis of polyvinyl alcohol microbubbles by capillary electrophoresis.

Contrast agents are widely used to enhance the image quality in clinical imaging using e.g. ultrasound. The contrast agents used for ultrasound imaging are mainly microbubbles (MBs) with a soft or hard shell encapsulating a core of gas. In the present study, MBs with a hard shell of polyvinyl alcohol (PVA), and a core of air were analysed in a capillary electrophoretic system using a UV area imaging detector. The detector was operating at 3 wavelengths; 214 nm, 255 nm and 525 nm, and the highest absorbance for individual PVA-MBs were obtained at 214 nm. Two detection windows and a vertical loop capillary position enabled tracking of the PVA-MBs both in an upward and a downward flow direction, where PVA-MBs had different flow distributions and slightly higher average flow velocity upwards, attributed to temperature differences in the capillary that was part within the instrument and part outside. The tracking also allowed counting and quantification of the PVA-MBs. Separation of PVA-MBs from proteins present in human blood plasma was achieved, with multi-wavelength imaging showing best contrast at 525 nm. The PVA-MBs absolute values of negative zeta potential and anionic mobility when injected from plasma in the pH 12 background electrolyte are higher than those obtained for MBs injected from buffer, consistent with their increased negative charge due to a protein corona coating of the PVA-MBs.

Structural basis for the formation of soy protein nanofibrils.

Amyloid-like protein nanofibrils (PNFs) can assemble from a range of different proteins including disease-associated proteins, functional amyloid proteins and several proteins for which the PNFs are neither related to disease nor function. We here examined the core building blocks of PNFs formed by soy proteins. Fibril formation at pH 2 and 90 °C is coupled to peptide hydrolysis which allows isolation of the PNF-forming peptides and identification of them by mass spectrometry. We found five peptides that constitute the main building blocks in soy PNFs, three of them from the protein ß-conglycinin and two from the protein glycinin. The abilities of these peptides to form PNFs were addressed by amyloid prediction software and by PNF formation of the corresponding synthetic peptides. Analysis of the structural context in the native soy proteins revealed two structural motifs for the PNF-forming peptides: (i) so-called ß-arches and (ii) helical segments involved in quaternary structure contacts. However, the results suggest that neither the native structural motifs nor the protein of origin defines the morphology of the PNFs formed from soy protein isolate.

Analysis of polyvinyl alcohol microbubbles in human blood plasma using capillary electrophoresis.

Recently, a new type of ultrasound contrast agent that consists of air-filled microbubbles stabilized with a shell of polyvinyl alcohol was developed. When superparamagnetic nanoparticles of iron oxide are incorporated in the polymer shell, a multimodal contrast agent can be obtained. The biodistribution and elimination pathways of the polyvinyl alcohol microbubbles are essential to investigate, which is limited with today's techniques. The aim of the present study was, therefore, to develop a method for qualitative and quantitative analysis of microbubbles in biological samples using capillary electrophoresis with ultraviolet detection. The analysis parameters were optimized to a wavelength at 260 nm and pH of the background electrolyte ranging between 11.9 and 12. Studies with high-intensity ultrasonication degraded microbubbles in water showed that degraded products and intact microbubbles could be distinguished, thus it was possible to quantify the intact microbubbles solely. Analysis of human blood plasma spiked with either plain microbubbles or microbubbles with nanoparticles demonstrated that it is possible to separate them from biological components like proteins in these kinds of samples.