Effect of occlusal hypofunction on centre of resistance in maxillary central incisor using the finite element method.

OBJECTIVES: To determine differences in the location of centre of resistance (Cres) between functional and hypofunctional teeth and to evaluate the relationship between the pulp cavity volume and locations of the Cres, using the finite element (FE) method. DESIGN: Retrospective cohort study. PARTICIPANTS: FE models of right maxillary central incisor, derived from cone-beam computed tomography (CBCT) images of 46 participants, were divided into normal function (n = 23) and hypofunction (n = 23) groups using anterior overbite and cephalometric measurements. METHODS: Measurements of the tooth and pulp cavity volume were made from the CBCT. Cres levels were presented as percentages of the root length from the root's apex. All data were analysed and compared using the independent t-test (P < 0.05). The relationship between the location of Cres and volume ratios were evaluated statistically. RESULTS: The means of the pulp cavity/tooth volume and root canal/ root volume ratio of the maxillary central incisor in the anterior open bite group were significantly greater than those in the normal group. The average location of Cres in the anterior open bite group was 0.6 mm (3.7%) apically from the normal group, measured from root apex. The difference was statistically significant (P < 0.01). There was a significant correlation between root canal/root volume ratio and locations of Cres (r = -0.780, P < 0.001). CONCLUSIONS: The Cres in the hypofunctional group was located more apical than the functional group. As the pulp cavity volume increased, the level of Cres shifted apically.

Comparison of Preoperative Measurement Methods of Alveolar Cleft Volume Using Cone Beam Computed Tomography between Computer Simulation and Water Displacement Methods.

OBJECTIVE: To compare the use of a computer simulation by Mimics software and the water displacement method as means for measurement of alveolar cleft volume on cone beam computed tomography (CBCT) data. DESIGN: Prospective study. SETTLING: Institutional research. PATIENTS: Patients with unilateral complete cleft lip and palate (UCCLP) who would undergo alveolar bone grafting. INTERVENTIONS: CBCT images of twenty patients with UCCLP were included in the study. In the first method, the water displacement method was adopted to measure volume of plasticine filled in the alveolar cleft imprinted on 3D printed model of maxilla. In the second method a volumetric assessment function in Mimics software was adopted to measure volume of 3D virtual model of alveolar cleft constructed from CBCT images. A comparison on the alveolar cleft volumes derived from the two methods was assessed using the statistical paired t-test. MAIN OUTCOME MEASURE: The paired-t test showed no statistically significant difference between alveolar cleft volumes measured by the two methods (P = 0.075). RESULTS: Mean volume of the alveolar cleft measured by the water displacement method was 1.03 ± 0.31 ml whereas by the computer simulation using Mimics software the value was 1.00 ± 0.31 ml. The mean difference between the two methods was 0.03 ± 0.08 ml. CONCLUSION: The computer simulation by Mimics software as a means for measurement of alveolar cleft volume on CBCT data is as accurate as the measurement by the water displacement method.

Does pulp cavity affect the center of resistance in three-dimensional tooth model? A finite element method study.

OBJECTIVES: To compare the center of resistance (Cres) of the maxillary central incisor in models with and without the pulp cavity and to evaluate the association of pulp cavity/tooth volume ratio and difference in Cres position between the two models. MATERIALS AND METHODS: CBCT images of the right maxillary central incisor were collected from 18 subjects. Pulp cavity/tooth volume ratio was measured, and finite element models of teeth and periodontal structures were generated. Cres location was presented as a percentage of root length measured from the root apex. Differences in Cres positions between models were compared using the paired t-test, while the correlation between pulp cavity/tooth volume ratio and a difference in Cres was evaluated by Pearson's correlation coefficient. RESULTS: For the pulp cavity model, the average location of the Cres measured from the apex of the root was 58.8% ± 3.0%, which resulted in a difference of 4.1% ± 1.1% (0.5 mm) apically, when compared with the model without pulp cavity. Differences in Cres between the models were statistically significant (P < 0.01), while the correlation between pulp cavity/tooth volume ratio and a difference in Cres between models was significantly positive (r = 0.709, P = 0.001). CONCLUSIONS: In the pulp cavity model, the Cres was located in a more apical position. The difference in Cres between models increased as the pulp cavity/tooth volume ratio increased. CLINICAL RELEVANCE: The line of force must be applied more apically in the pulp cavity model to achieve the desired orthodontic tooth movement.

Three-dimensional volumetric evaluation of dental pulp cavity/tooth ratio in anterior open bite malocclusion using cone beam computed tomography.

OBJECTIVES: To assess and compare pulp cavity/tooth volume ratio of maxillary permanent teeth between patients exhibiting anterior open bite malocclusion and those exhibiting anterior normal overbite using cone beam computed tomography (CBCT). MATERIALS AND METHODS: 3D dental images from 44 patients aged between 15 and 29 years were analyzed. The DICOM files of all dental images were imported into an image processing software for calculating pulp cavity volume and tooth volume. Differences of pulp cavity volume, tooth volume, and pulp cavity/tooth volume ratio of each tooth type from both types of occlusions were analyzed using the independent t test. The intra-class correlation coefficient was used to evaluate intra-examiner reliability. RESULTS: The means of pulp cavity/tooth volume ratio in anterior open bite group were significantly greater than those in anterior normal overbite group (central incisor p = 0.001; lateral incisor p = 0.00025 and canine p = 0.004). The means of root canal/root volume ratio in anterior open bite group were significantly greater than anterior normal overbite group (central incisor p = 0.00001; lateral incisor p = 0.00007; and canine p = 0.001), whereas there were no significant differences of the means of pulp chamber/crown volume was observed. CONCLUSION: Anterior open bite malocclusion might lead to an increase of the pulp cavity volume and decrease of the tooth volume due to occlusal hypofunction. CLINICAL RELEVANCE: Orthodontic force should be carefully determined in anterior open bite patient due to the greater root canal volume and lesser root volume.

TRPS1 mutation associated with trichorhinophalangeal syndrome type 1 with 15 supernumerary teeth, hypoplastic mandibular condyles with slender condylar necks and unique hair morphology.

Trichorhinophalangeal syndrome type 1 (TRPS1; Online Mendelian Inheritance in Man #190350) is an autosomal dominant disorder caused by mutations in TRPS1. We report a Thai male with TRPS1 who carried a c.1842C>T (p.Arg615Ter) mutation. He had 15 supernumerary teeth, double mental foramina, hypoplastic mandibular condyles with slender condylar necks and unique ultrastructural hair findings. Body hair was absent. The hair in the area of a congenital melanocytic nevus had a greater number of hair cuticles than normal. Occipital hair had abnormal hair follicles and cuticles. The scale edges of the hair cuticles were detached and rolled up. Hypoplastic mandibular condyles with slender condylar necks, double mental foramina and the rolled up edges of hair cuticles have not been reported in patients with TRPS1.

Quantitative evaluation of palatal bone thickness in patients with normal and open vertical skeletal configurations using cone-beam computed tomography.

PURPOSE: To perform a comparative analysis of the palatal bone thickness in Thai patients exhibiting class I malocclusion according to whether they exhibited a normal or open vertical skeletal configuration using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Thirty CBCT images of Thai orthodontic patients (15-30 years of age) exhibiting class I malocclusion with a normal or open vertical skeletal configuration were selected. Palatal bone thickness was measured in a 3.0-mm grid pattern on both the right and left sides. The palatal bone thickness of the normal-bite and open-bite groups was compared using the independent t-test. The level of significance was established at P<.05. RESULTS: The palatal bone thickness in the normal-bite group ranged from 2.2±1.0 mm to 12.6±4.1 mm. The palatal bone thickness in the open-bite group ranged from 1.9±1.1 mm to 13.2±2.3 mm. The palatal bone thickness was lower at almost all sites in patients with open bite than in those with normal bite. Significant differences were found at almost all anteroposterior sites along the 3 most medial sections (3.0, 6.0, and 9.0 mm lateral to the midsagittal plane) (P<.05). CONCLUSION: Class I malocclusion with open vertical skeletal configuration may affect palatal bone thickness, so the placement of temporary anchorage devices or miniscrew implants in the palatal area in such patients should be performed with caution.

Biochemical and clinical comparisons of segmental maxillary posterior tooth distal movement between two different force magnitudes.

Background/objectives: Maxillary tooth distal movement is a treatment option for Class II malocclusion. This prospective clinical study (split-mouth design) was aimed to compare chondroitin sulphate (CS) levels in gingival crevicular fluid (GCF), the rates of tooth movement, and patient pain and discomfort during segmental maxillary posterior tooth distal movement using either 120 or 180 g of retraction force. Materials and methods: Twenty patients (6 males and 14 females; aged 18.85 ± 4.38 years) with Class II malocclusion were recruited. The force magnitudes were controlled at 120 or 180 g, randomly assigned to either the right or left five-tooth segments. Gingival crevicular fluid samples were collected with Periopaper® strips. Competitive ELISA with monoclonal antibody was used to measure CS levels in GCF. The rates of segmental maxillary posterior tooth distal movement, and the amount of pain and discomfort were evaluated. Results: The median CS levels during the segmental distal movement period were significantly greater than those before the segmental distal movement period (P < 0.05). At each 1-week period during segmental distal movement, the differences between the median CS levels induced by the two different force magnitudes were not significantly different. The rates of segmental distal movement induced by the two different force magnitudes were not significantly different. The mean visual analog scale scores for pain and discomfort with 180 g of retraction force was significantly greater than that with 120 g (P < 0.05). Conclusions: One hundred and twenty grams of retraction force was sufficient to cause segmental distal movement, as indicated by biochemically assessed bone remodeling activity and a similar rate of tooth movement to that caused by 180 g of retraction force; it also produced less patient pain and discomfort. Trial Registration: The study has been registered as TCTR20170728001.

Root surface areas of maxillary permanent teeth in anterior normal overbite and anterior open bite assessed using cone-beam computed tomography.

PURPOSE: The aim of this study was to compare the root surface areas of the maxillary permanent teeth in Thai patients exhibiting anterior normal overbite and in those exhibiting anterior open bite, using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: CBCT images of maxillary permanent teeth from 15 patients with anterior normal overbite and 18 patients with anterior open bite were selected. Three-dimensional tooth models were constructed using Mimics Research version 17.0. The cementoenamel junction was marked manually. The root surface area was calculated automatically by 3-Matic Research version 9.0. The root surface areas of each tooth type from both types of bite were compared using the independent t-test (P<.05). The intraclass correlation coefficient was used to assess intraobserver reliability. RESULTS: The mean root surface areas of the maxillary central and lateral incisors in individuals with anterior open bite were significantly less than those in those with normal bite. The mean root surface area of the maxillary second premolar in individuals with anterior open bite was significantly greater than in those with normal bite. CONCLUSION: Anterior open-bite malocclusion might affect the root surface area, so orthodontic force magnitudes should be carefully determined.

Distances from the root apices of posterior teeth to the maxillary sinus and mandibular canal in patients with skeletal open bite: A cone-beam computed tomography study.

PURPOSE: This study determined and compared the distances from the maxillary root apices of posterior teeth to the floor of the maxillary sinus, or maxillary sinus distances (MSDs), and the distances from the mandibular root apices of the posterior teeth to the mandibular canal, or mandibular canal distances (MCDs), in Thai subjects with skeletal open bite and skeletal normal bite. MATERIALS AND METHODS: Pretreatment cone-beam computed tomography (CBCT) images were obtained from 30 Thai orthodontic patients (15 patients with skeletal normal bite and 15 with skeletal open bite) whose ages ranged from 14 to 28 years. The CBCT images of the patients were processed and measured using the Romexis Viewer program. The MSDs and MCDs from the root apices of the maxillary and mandibular second premolar, first molar, and second molar to the maxillary sinus floor or the mandibular canal were measured perpendicularly to the occlusal plane. The Student t test was used for comparisons between the 2 groups. RESULTS: The greatest mean MSDs were from the root apex of the second premolars in both groups, whereas the least mean MSDs were from the mesiobuccal root apex of the second molars. The greatest mean MCDs were from the mesial root apex of the first molars, whereas the least mean MCDs were from the distal root apex of the second molars. CONCLUSION: There were no differences in the mean MSDs or the mean MCDs between the skeletal normal bite group and the skeletal open bite group.

Comparison of 2 root surface area measurement methods: 3-dimensional laser scanning and cone-beam computed tomography.

PURPOSE: The aim of this study was to compare the use of 3-dimensional (3D) laser scanning and cone-beam computed tomography (CBCT) as methods of root surface measurement. MATERIALS AND METHODS: Thirty teeth (15 maxillary first premolars and 15 mandibular first premolars) from 8 patients who required extractions for orthodontic treatment were selected. Before extraction, pre-treatment CBCT images of all the patients were recorded. First, a CBCT image was imported into simulation software (Mimics version 15.01; Materialise, Leuven, Belgium) and the root surface area of each tooth was calculated using 3-Matic (version 7.01, Materialise, Leuven, Belgium). After extraction, all the teeth were scanned and the root surface area of each extracted tooth was calculated. The root surface areas calculated using these 2 measurement methods were analyzed using the paired t-test (P<.05). Correlations between the 2 methods were determined by calculating the Pearson correlation coefficient. The intraclass correlation coefficient (ICC) was used to assess intraobserver reliability. RESULTS: The root surface area measurements (230.11±41.97 mm2) obtained using CBCT were slightly greater than those (229.31±42.46 mm2) obtained using 3D laser scanning, but not significantly (P=.425). A high Pearson correlation coefficient was found between the CBCT and the 3D laser scanner measurements. The intraobserver ICC was 1.000 for 3D laser scanning and 0.990 for CBCT. CONCLUSION: This study presents a novel CBCT approach for measuring the root surface area; this technique can be used for estimating the root surface area of non-extracted teeth.

Biochemical and Clinical Assessments of Segmental Maxillary Posterior Tooth Intrusion.

Objective. To compare chondroitin sulphate (CS) levels around maxillary second premolars, first molars, and second molars between the unloaded and the loaded periods and to measure the rates of intrusion of maxillary posterior teeth during segmental posterior tooth intrusion. Materials and Methods. In this prospective clinical study, 105 teeth (from 15 patients exhibiting anterior open bite and requiring maxillary posterior tooth intrusion) were studied. Competitive ELISA was used to detect CS levels. Dental casts (during the unloaded and loaded periods) were scanned, and posterior tooth intrusion distances were measured. Results. During the unloaded period, the median CS levels around maxillary second premolars, first molars, second molars (experimental teeth), and mandibular first molars (negative control) were 0.006, 0.055, 0.056, and 0.012 and during the loaded period were 2.592, 5.738, 4.727, and 0.163 ng/µg of total protein, respectively. The median CS levels around experimental teeth were significantly elevated during the loaded period. The mean rates of maxillary second premolar and first and second molar intrusion were 0.72, 0.58, and 0.40 mm/12 weeks, respectively. Conclusions. Biochemical and clinical assessments suggested that the segmental posterior tooth intrusion treatment modality with 50 g of vertical force per side was sufficient. Trial Registration. The study is registered as TCTR20170206006.

Comparison of interradicular distances and cortical bone thickness in Thai patients with Class I and Class II skeletal patterns using cone-beam computed tomography.

PURPOSE: This study evaluated and compared interradicular distances and cortical bone thickness in Thai patients with Class I and Class II skeletal patterns, using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Pretreatment CBCT images of 24 Thai orthodontic patients with Class I and Class II skeletal patterns were included in the study. Three measurements were chosen for investigation: the mesiodistal distance between the roots, the width of the buccolingual alveolar process, and buccal cortical bone thickness. All distances were recorded at five different levels from the cementoenamel junction (CEJ). Descriptive statistical analysis and t-tests were performed, with the significance level for all tests set at p<0.05. RESULTS: Patients with a Class II skeletal pattern showed significantly greater maxillary mesiodistal distances (between the first and second premolars) and widths of the buccolingual alveolar process (between the first and second molars) than Class I skeletal pattern patients at 10 mm above the CEJ. The maxillary buccal cortical bone thicknesses between the second premolar and first molar at 8 mm above the CEJ in Class II patients were likewise significantly greater than in Class I patients. Patients with a Class I skeletal pattern showed significantly wider mandibular buccolingual alveolar processes than did Class II patients (between the first and second molars) at 4, 6, and 8 mm below the CEJ. CONCLUSION: In both the maxilla and mandible, the mesiodistal distances, the width of the buccolingual alveolar process, and buccal cortical bone thickness tended to increase from the CEJ to the apex in both Class I and Class II skeletal patterns.

Comparisons between two biochemical markers in evaluating periodontal disease severity: a cross-sectional study.

BACKGROUND: The purpose of this study was to compare two biochemical markers, which have been previously used to determine the degrees of alveolar bone destruction, in evaluating periodontal disease severity. METHODS: The WF6 epitope of chondroitin sulfate (CS) and the alkaline phosphatase (ALP) levels were determined in gingival crevicular fluid (GCF) samples collected from patients with various degrees of disease severity, including ten patients with gingivitis (50 gingivitis sites) and 33 patients with chronic periodontitis (including gingivitis, slight, moderate, and severe periodontitis sites; n = 50 each), as well as from ten healthy volunteers (50 healthy sites) by Periopaper strips. The levels of CS and ALP were measured by an ELISA and a fluorometric assay, respectively. RESULTS: The results demonstrated low levels of CS and ALP in non-destructive and slightly destructive periodontitis sites, whereas significantly high levels of these two biomolecules were shown in moderately and severely destructive sites (p < 0.05). Although a significant difference in CS levels was found between moderate and severe periodontitis sites, no difference in ALP levels was found. Stronger correlations were found between CS levels and periodontal parameters, including probing depth, loss of clinical attachment levels, gingival index and plaque index, than between ALP levels and these parameters. CONCLUSIONS: It is suggested that the CS level is a better diagnostic marker than the ALP level for evaluating distinct severity of chronic periodontitis.

Comparisons of the chondroitin sulphate levels in orthodontically moved canines and the clinical outcomes between two different force magnitudes.

The aims of this study were to compare the chondroitin sulphate (CS) levels in gingival crevicular fluid (GCF) of moved canines using either 70 or 120 g of orthodontic force, and to compare the rate of tooth movement and the amount of pain between these two force magnitudes. Sixteen patients (6 males and 10 females; aged 16.91 ± 2.99 years), with class I malocclusion, who required orthodontic treatment with first premolar extractions, were recruited. The force magnitudes used to move the maxillary canines distally were controlled at 70 and 120 g on the right and the left sides, respectively. GCF samples were collected with Periopaper(®) strips before and during orthodontic tooth movement. Competitive ELISA with monoclonal antibody was used to measure the CS levels. The distance of tooth movement and the amount of pain assessed by visual analog scale (VAS) scores were evaluated. The medians of CS levels during the loaded period were significantly greater than those during the unloaded period (P < 0.05). The differences between the medians of CS levels of 70 g and 120 g retraction force during each 1 week period were not significant. There was no significant difference in the rates of canine movement between these two force magnitudes. However, using 120 g, the medians of VAS scores were significantly greater than those with 70 g (P < 0.05). Collectively, 70 g retraction force appears to be sufficient and more suitable than 120 g force as it causes no difference in biochemically-assessed bone remodelling activity, the same rate of tooth movement, reduced pain and better comfort.

TBX22 mutation associated with cleft lip/palate, hypodontia, and limb anomaly.

Mutations in TBX22 are known causes of cleft palate with/without ankyloglossia. We identified a hemizygous missense c.452G>T (p.Arg151Leu) mutation in a Thai boy who had unilateral complete cleft lip and palate, agenesis of a maxillary second premolar, ankyloglossia, hypoplastic carpal bones, and hypoplastic right thumb. Our study has demonstrated that TBX22 mutation is associated not only with cleft palate and ankyloglossia, but also cleft lip and palate and tooth agenesis. Phenotypic variability caused by a single nucleotide substitution is clearly demonstrated.

Crown angulation and inclination of Northern Thais with good occlusion.

When patients of differing ethnicities are treated with one bracket system, negative consequences for the occlusion can result. This study investigated the crown angulation and inclination on study casts of 60 Northern Thais (30 males and 30 females) with a good occlusion. In all study casts, each tooth (except the third molars) was evaluated with the orthodontic Torque Angulation Device (TAD) twice on the right side; this was also performed twice on the left side. The mean of the two evaluations was used for the statistical analysis. The means of the males and females were compared with the independent Student t test. The results were that the crown angulation of the mandibular first and second molars was significantly higher in females (P<.01) and that the crown inclination of all teeth did not differ between the two sexes.

Chondroitin sulphate (WF6 epitope) levels in peri-miniscrew implant crevicular fluid during orthodontic loading.

The aim of this study was to monitor changes in chondroitin sulphate (CS; WF6 epitope) levels in peri-miniscrew implant crevicular fluid (PMICF) during orthodontic loading. Ten patients (seven males and three females; aged 22.0 +/- 3.4 years), who required orthodontic treatment with extraction of all four premolar teeth, participated in the study. Twenty miniscrew implants (used as orthodontic anchorage) were placed, two in each patient, buccally and bilaterally in the alveolar bone between the roots of the maxillary posterior teeth. Sentalloy closed-coil springs (50 g) were used to load the miniscrew implants and to move the maxillary canines distally. During the unloaded period, PMICF samples were collected on days 1, 3, 5, and 7 after miniscrew implant placement and on days 14, 21, 28, and 35 during the loaded period. Clinical mobility assessments of the miniscrew implants were recorded at each visit. The competitive enzyme-linked immunosorbent assay with monoclonal antibody WF6 was used to detect CS (WF6 epitope) levels in the PMICF samples. The differences between the CS (WF6 epitope) levels during the unloaded and loaded periods were determined by a Mann-Whitney U-test. During the loaded period, two miniscrew implants were considered to have failed. The CS (WF6 epitope) levels during the unloaded period ranged from 0.00 to 758.03 ng/ml and those during the loaded period from 0.00 to 1025.11 ng/ml. Medians of CS (WF6 epitope) levels, around 'immobile' miniscrew implants, between the unloaded and loaded periods were not significantly different (P = 0.07). CS (WF6 epitope) levels in PMICF can be detected and may be used as biomarkers for assessing alveolar bone remodelling around miniscrew implants during orthodontic loading.