All Visible Light Photoswitch Based on the Dimethyldihydropyrene Unit Operating in Aqueous Solutions with High Quantum Yields.

Molecular systems and devices whose properties can be modulated using light as an external stimulus are the subject of numerous research studies in the fields of materials and life sciences. In this context, the use of photochromic compounds that reversibly switch upon light irradiation is particularly attractive. However, for many envisioned applications, and in particular for biological purposes, illumination with harmful UV light must be avoided and these photoactivable systems must operate in aqueous media. In this context, we have designed a benzo[e]-fused dimethyldihydropyrene compound bearing a methyl-pyridinium electroacceptor group that meets these requirements. This compound (closed state) is able to reversibly isomerize under aerobic conditions into its corresponding cyclophanediene form (open isomer) through the opening of its central carbon-carbon bond. Both the photo-opening and the reverse photoclosing processes are triggered by visible light illumination and proceed with high quantum yields (respectively 14.5% yield at λ = 680 nm and quantitative quantum yield at λ = 470 nm, in water). This system has been investigated by nuclear magnetic resonance and absorption spectroscopy, and the efficient photoswitching behavior was rationalized by spin-flip time-dependent density functional theory calculations. In addition, it is demonstrated that the isomerization from the open to the closed form can be electrocatalytically triggered.

Catalytic Light-Triggered Reduction Promoted by a Dithienylethene Derivative.

A pyridinium substituted dithienylethene derivative was used for the first time as an efficient photoreducing agent of two different substrates. This reaction exhibits high catalytic yields due to the continuous regeneration of the initial state of the photochromic molecule.

[Cr(ttpy)2]3+ as a multi-electron reservoir for photoinduced charge accumulation.

[Cr(ttpy)2]3+ (ttpy = 4'-(4-methylphenyl)-2,2':6,2''-terpyridine) exhibits rich electrochemical and photophysical properties. Cyclic voltammetry performed in CH3CN shows in the cathodic part the presence of three one-electron reversible systems at -0.47, -0.85 and -1.35 V vs. Ag/AgNO3 10-2 M. These systems are attributed to the reduction of the terpyridine ligands with a partial delocalization of the charge on the tolyl for the last reduction event. The three different reduced species were generated by exhaustive electrolysis and characterized by EPR and UV-visible spectroscopy; DFT calculations were performed to locate the spin density of the electrons added during the reduction. Visible light irradiation of [Cr(ttpy)2]3+ induces the population of a luminescent metal-centered excited state with a lifetime of 270 ns in deoxygenated CH3CN. This excited state can be quenched by an electron transfer process with triphenylphosphine (PPh3) or triethanolamine (TEOA). Using TEOA as a sacrificial electron donor, the doubly reduced species (i.e.[Cr(ttpy)2] +) can be generated under continuous irradiation. In the presence of [Ru(bpy)3]2+ as an additional photosensitizer, the photoreduction of [Cr(ttpy)2]3+ towards [Cr(ttpy)2]+ is accelerated. The trinuclear [{RuII(bpy)2(bpy-O-tpy)}2CrIII]7+ complex ([Ru2Cr]7+) in which a CrIII-bis-terpyridine centre is covalently linked to two RuII-tris-bipyridine moieties by oxo bridges has been synthesised. Its electrochemical, photophysical and photochemical properties were investigated in deoxygenated CH3CN. Cyclic voltammetry indicates only a poor electronic communication between the different subunits, whereas luminescence experiments show a strong quenching of the RuII* excited state by an intramolecular process. Continuous irradiation of [Ru2Cr]7+ under visible conditions in the presence of TEOA leads to [Ru2Cr]4+ where three electrons are stored on the [Cr(ttpy)] subunit.

New Acridine-Based Tridentate Ligand for Ruthenium(II): Coordination with a Twist.

A new tridentate ligand based on acridine has been synthetized. The central acridine heterocycle bears two pyridine coordinating units at positions 4 and 5. The terdentate 2,7-di- tert-butyl-4,5-di(pyridin-2-yl)acridine (dtdpa) was then coordinated to a ruthenium(II) cation. The corresponding homoleptic complex could only be obtained where both ligands coordinate to the ruthenium in a fac fashion. Thus, a heteroleptic compound (2) was constructed in combination with a terpyridine ligand in order to constrain the ligand to adopt a mer geometry. Such a coordination imposes a dramatic twist on the acridine heterocycle, resulting in an unexpected photophysical behavior. The electrochemical and photophysical properties of both complexes were studied, and the molecular structure of 2 was determined by X-ray diffraction. The two compounds absorb at low energy wavelengths, and a very weak luminescence is detected only for complex 2 in the near-infrared region.

Photoinduced Charge Separation within Metallo-supramolecular Wires Built around a [Ru(bpy)3](2+)-Bisterpyridine Linear Entity.

A [Ru(bpy)3](2+)-like complex (L1) bearing two free terpyridine groups at the 5 and 5' positions of the same bipyridine, linked by the rigid and linear 2,5-dimethyl phenylene bridges has been synthesized to open access to two classes of linear molecular wires with photosensitive properties: a bimetallic coordination polymer and an inorganic triad. In this Research Article, we report on the synthesis and characterization of the resulting [{Ru(II_)Fe(II)}n](4n+) alternated bimetallic polymer and the [Co(III_)Ru(II_)Fe(II)](7+) triad based on the building block L1. The [{Ru(II_)Fe(II)}n](4n+) polymer is fully characterized in solution. Cyclic voltammetry and emission lifetime measurements show that the bridging ligand allows interaction between the metal centers in the excited state despite the lack of interactions in the ground state. Under visible irradiation, the polymer can be fully oxidized in the presence of a sacrificial electron acceptor in solution. Thin robust films of the polymer are easily obtained on ITO by a simple electrochemical procedure based on an electroreduction adsorption process. The ITO/[{Ru(II_)Fe(II)}n](4n+)-modified electrode behaves as a photocathode under irradiation in the presence of ArN2(+). The magnitude of the photocurrent is dependent on the film thickness, probably limited by the diffusion of charge in thicker film. On the other hand L1 is also used to construct a well-ordered triad in association with Co(III) and Fe(II) metallic centers as electron acceptor and donor, respectively. The metallic triad is anchored on ITO or on a SiO2 wafer, starting from a terpyridine phosphonate modified surface. AFM images prove the presence of the triad in a linear upward orientation. Irradiation of the ITO/[Co(III_)Ru(II_)Fe(II)](7+) modified surface in the presence of triethanolamine in CH3CN induces the generation of an anodic photocurrent of around 30 µA.cm(-2). The photocurrent density generated by the ITO/[Co(III_)Ru(II_)Fe(II)](7+) electrode, appears to be more stable than in the case of ITO/[{Ru(II_)Fe(II)}n](4n+) because of the presence of the anchoring group. Moreover, this photocurrent magnitude represents an enhancement of 30% compared to our previous triad ( Dalton Trans. 2014 , 43 , 12156 - 12159 ), proving the advantage of a linear and rigid spacer for the construction of such molecular assemblies with photoinduced charge transfer abilities.

A Ruthenium(II)-Copper(II) Dyad for the Photocatalytic Oxygenation of Organic Substrates Mediated by Dioxygen Activation.

Dioxygen activation by copper complexes is a valuable method to achieve oxidation reactions for sustainable chemistry. The development of a catalytic system requires regeneration of the Cu(I) active redox state from Cu(II). This is usually achieved using extra reducers that can compete with the Cu(II)(O2) oxidizing species, causing a loss of efficiency. An alternative would consist of using a photosensitizer to control the reduction process. Association of a Ru(II) photosensitizing subunit with a Cu(II) pre-catalytic moiety assembled within a unique entity is shown to fulfill these requirements. In presence of a sacrificial electron donor and light, electron transfer occurs from the Ru(II) center to Cu(II). In presence of dioxygen, this dyad proved to be efficient for sulfide, phosphine, and alkene catalytic oxygenation. Mechanistic investigations gave evidence about a predominant (3)O2 activation pathway by the Cu(I) moiety.

Photoelectric conversion at a [Ru(bpy)3](2+)-based metallic triad anchored on ITO surface.

A tri-metallic triad based on a [Ru(bpy)3](2+) moiety connected to Fe(ii) and Co(iii) bisterpyridine has been grafted on an ITO electrode by a stepwise procedure. Under visible light, in the presence of a sacrificial electron donor, the system produces electric current. The photo-current magnitude is compared to the one generated from a Co(iii)-Ru(ii) dyad and shows an increase of 40%.

An original electrochemical method for assembling multilayers of terpyridine-based metallic complexes on a gold surface.

A new method based on the electrochemical oxidation of thiols was used to easily generate multilayer assemblies of coordination complexes on a gold surface. For this purpose, two complexes bearing two anchoring groups for surface attachment have been prepared: [Ru(tpySH)(2)](2+) (1) and [Fe(tpySH)(2)](2+) (2) (tpySH = 4'-(2-(p-phenoxy)ethanethiol)-2,2':6',2″-terpyridine). Cyclic voltammetry of 1 in CH(3)CN exhibits two successive oxidation processes. The first is irreversible and attributed to the oxidation of the thiol substituents, whereas the second is reversible and corresponds to the 1 e(-) metal-centered oxidation. In the case of 2 both processes are superimposed. Monolayers of 1 or 2 have been formed on gold electrodes by spontaneous adsorption from micromolar solutions of the complexes in CH(3)CN. SAMs (self-assembled monolayers) exhibit redox behavior similar to the complexes in solution. The high surface coverage value obtained (Γ = 6 × 10(-10) and 4 × 10(-10) mol cm(-2) for 1 and 2, respectively) is consistent with a vertical orientation for the complexes; thus, one thiol is bound to the gold electrode, with the second unreacted thiol moiety exposed to the outer surface. Successive cyclic voltammetry induced a layer-by-layer nanostructural growth at the surface of the SAMs, and this is presumably due to the electrochemical formation of disulfide bonds, where the thiol moieties play a double role of both an anchoring group and an electroactive coupling agent. The conditions of the deposition are studied in detail. Modified electrodes containing both 1 and 2 alternatively can be easily prepared following this new approach. The film proved to be stable, displaying a similar current/voltage response for more than 10 repeating cycles in oxidation up to 0.97 V vs Ag/AgNO(3) (10(-2) M).

Structure and dynamics of the excited states of 1,3-diarylisobenzofurans: an experimental and theoretical study.

The emission properties of a series of substituted 1,3-diarylisobenzofurans have been studied. Most compounds exhibit very intense emission in the nanosecond timescale at room temperature as well as at 77 K. The room temperature emission is attributed to the deactivation of a twisted intramolecular charge transfer excited state, based on its energy, shape and solvent dependence. The experimental results are strongly supported by a theoretical study on one representative compound. The DFT/TD-DFT calculations demonstrate that the initial excited state relaxes toward a twisted structure.

Elaboration of covalently linked polyoxometalates with ruthenium and pyrene chromophores and characteriation of their photophysical properties.

Keggin and Dawson-type polyoxometalates (POMs) decorated by organometallic [cyclometalated ruthenium(II) polypyridine complex] or organic (pyrene) chromophores were prepared by postfunctionalization of hybrid disilylated POM platforms. The connection is made in a very efficient and modular way via Sonogashira coupling reactions, which provide a rigid linkage between the POM and the photoactive centers. Electronic properties have been inferred from electrochemical and photophysical studies and reflect poor electronic interactions between both partners. The presence of the POM leads to luminescence quenching of the chromophores, which was attributed to an intramolecular electron transfer from the chromophore to the POM. The rate of this process is much faster in the POM-pyrene than in the POM-Ru system. It depends on the driving force dictated by the redox potentials of both partners but also in the case of the POM-Ru system on the presence of the metallacycle, which acts as a molecular insulator and delays the intramolecular electron transfer. In the POM-Ru system, a comparative study of the luminescence quenching showed that the electron transfer is still more important in the covalently bonded hybrids than in systems where the POM and the ruthenium complexes are assembled via electrostatic interactions.

Electronic and geometrical manipulation of the excited state of bis-terdentate homo- and heteroleptic ruthenium complexes.

This work describes the synthesis and characterization of two new bis-terdentate Ru(II) complexes. Compound 1 is a homoleptic complex containing two CNC N-heterocyclic carbene (NHC) based ligands, whereas compound 2 bears one CNC ligand and an ancillary terpyridine ligand. The redox and photophysical properties of both compounds have been investigated and their X-ray crystal structures determined. Complex 1 displays a close-to-perfect octahedral coordination geometry and is not luminescent at room temperature while complex 2 features room temperature and 77 K luminescence despite its partially distorted geometry. The presence of the NHC moieties brings a significant amount of electronic density to the metal centre therefore lowering its oxidation potential with respect to that of analogous polypyridyl complexes.

Photodimerizable ditopic ligand.

[reaction: see text] The synthesis, photophysical properties, and structural characterization of a photodimerizable ditopic ligand are described. Upon irradiation at 366 nm, ligand 1 dimerizes to the head-to-tail tetra-bpy ligand 2. This thermally stable photodimer can be dissociated back to 1 using higher energy irradiation (254 nm).

Light-driven expulsion of the sterically hindering ligand L in tris-diimine ruthenium(II) complexes of the Ru(phen)2(L)2+ family: a pronounced ring effect.

Three new ruthenium(II) complexes have been prepared which contain two 1,10-phenanthroline units and a third sterically hindering chelate. In one case, the hindering ligand is a disubstituted 2,2'-bipyridine (bpy) attached to two very bulky manisyl groups. The two other systems are similar in terms of size of the hindering groups (anisyl substituents) located close to the central metal. The complexes investigated in the Present Report are aimed at providing building blocks of future light-driven molecular machines. The photochemical expulsion of the sterically hindering chelate has thus been studied by UV-vis spectroscopy and 1H NMR. Surprisingly, the manisyl-containing complex turned out to be photochemically inert, indicating that a too bulky group acts as a protecting function versus decomplexation rather than as a destabilizing group. For the two other systems, a pronounced ring effect was observed: whereas the acyclic systems undergo fast photochemical expulsion of the bipy-based ligand, in the cyclic complex, the bipy-incorporating ring is decoordinated about 5 times less efficiently than the acyclic ligand of the previous case. These observations on the strong dependence of the photochemical behavior of the ruthenium(II) complexes on their structural properties are corroborated by X-ray diffraction studies on the three compounds investigated.

Synthesis of multi-1,10-phenanthroline ligands with 1,3-phenylene linkers and their lithium complexes.

The synthesis of two multisite ligands containing four and five 1,10-phenanthroline (phen) chelates in line, respectively, is presented. The connectors are 1,3-phenylene linkers. The two ligands were prepared following multistep procedures, the two key reactions being the Suzuki coupling reaction between aromatic nuclei and the nucleophilic addition of aryllithium derivatives onto a phen fragment. The coordination chemistry of both ligands with Li+ ions was very clean and selective, whereas their reaction with copper(I) led to intractable mixtures of insoluble complexes. The tetraphen and the pentaphen compounds afforded almost quantitatively the four- and five-lithium double-stranded helical complexes, respectively. The helical systems are probably highly wound, as indicated by NMR measurements. The pronounced strain of the 5-Li+ complex is reflected by the easy loss of a lithium cation, as shown by electrospray mass spectrometry.

Templated synthesis of a rotaxane with a [Ru(diimine)3]2+ core.

A rotaxane containing a ruthenium bisphenanthroline complex, acting as an axis, and a macrocycle incorporating a 2,2'-bipyridine (bpy) unit, threaded by the axis, has been synthesized. The bisphenanthroline ligand is such that its ruthenium(II) complexes possess a clearly identified axis, making such compounds ideal components of rotaxanes constructed around an octahedral ruthenium(II) center, which serves as a template. The ring is threaded by the axial ruthenium(II) precursor complex, to afford the corresponding pseudorotaxane in moderate yield. The X-ray structure analysis of this compound reveals the threaded nature of the complex. The length of the threaded ring (35 atoms in the periphery) is too short to allow easy threading of the axis through the macrocycle. As a consequence, an isomer is also obtained for which the axial ruthenium complex is attached in an exo fashion. (1)H NMR studies have been carried out, which reveal various conformational equilibria for the pseudorotaxane. Light-induced decoordination of the bpy-containing cyclic fragment was shown to be quantitative and to lead to the free ring and the axial ruthenium(II) complex, regardless of the starting compound (pseudorotaxane or exo isomer). Finally, the real rotaxane could be prepared, although it could not be separated from its exo isomer.