National Reconnaissance Survey of Microplastics in Municipal Wastewater Treatment Plants in Korea.

Large quantities of microplastics are thought to be emitted to freshwater environments via wastewater treatment plants (WWTPs). To evaluate the occurrence of microplastics in Korean WWTPs, a nationwide study was conducted for the first time in 50 representative WWTPs with large treatment capacities. Grab sampling and laboratory filtration were used for influents, whereas in situ filtration using a custom-made sampling device was used for effluents. The filtrates were pretreated using wet peroxidation and density separation prior to the identification of microplastics with a dissection microscope and Fourier-transform infrared spectroscopy. Pooled analyses of the microplastics revealed that they were predominantly fragment-shaped, and thermoplastics and synthetic fibers were the dominant microplastic materials in WWTPs. The concentration ranged from 10 to 470 L-1 in influents and 0.004 to 0.51 L-1 in effluents. The removal efficiency of microplastics during wastewater treatment was calculated to be 98.7-99.99% in 31 WWTPs. Additionally, WWTPs using advanced phosphorus removal processes exhibited higher removal efficiency than those not implementing such processes. Power-law distribution was successful in describing microplastic particle sizes down to 100 µm, although it was not applicable for smaller particles. This comprehensive monitoring study provides information on the current level and characteristics of microplastics in WWTPs in Korea.

Occurrence of microplastics in municipal sewage treatment plants: a review.

Municipal sewage treatment plants (STPs) are thought to be important point sources of microplastics in freshwater systems and many peer-reviewed articles have been published on this issue since mid-2010s. In this review, we summarize existing literature on the occurrence of microplastics in STPs and experimental methods used for isolation and identification of microplastics. The number concentrations of microplastics in STP influents were 15.1-640 L-1 , whereas those in the STP effluents were highly variable and ranged from not detectable to 65 L-1 . For most of cases, conventional STPs are removing microplastics very effectively. Fragments and fibers are dominant shapes of microplastics. Thermoplastics (polyethylene and polypropylene) and polyester are the predominant materials recovered. Although further research is needed, size distribution of microplastics in STPs is likely to follow a power law, implying that different studies using different size cutoffs may be compared after establishing a power law relationship.