Microbe cultivation guidelines to optimize rhamnolipid applications.

In the growing landscape of interest in natural surfactants, selecting the appropriate one for specific applications remains challenging. The extensive, yet often unsystematized, knowledge of microbial surfactants, predominantly represented by rhamnolipids (RLs), typically does not translate beyond the conditions presented in scientific publications. This limitation stems from the numerous variables and their interdependencies that characterize microbial surfactant production. We hypothesized that a computational recipe for biosynthesizing RLs with targeted applicational properties could be developed from existing literature and experimental data. We amassed literature data on RL biosynthesis and micellar solubilization and augmented it with our experimental results on the solubilization of triglycerides (TGs), a topic underrepresented in current literature. Utilizing this data, we constructed mathematical models that can predict RL characteristics and solubilization efficiency, represented as logPRL = f(carbon and nitrogen source, parameters of biosynthesis) and logMSR = f(solubilizate, rhamnolipid (e.g. logPRL), parameters of solubilization), respectively. The models, characterized by robust R2 values of respectively 0.581-0.997 and 0.804, enabled the ranking of descriptors based on their significance and impact-positive or negative-on the predicted values. These models have been translated into ready-to-use calculators, tools designed to streamline the selection process for identifying a biosurfactant optimally suited for intended applications.

Bile conjugation and its effect on in vitro lipolysis of emulsions.

Bile Salts (BS) are responsible for stimulating lipid digestion in our organism. Gut microbiota are responsible for the deconjugation process of primary conjugated to secondary unconjugated BS. We use two structurally distinct BS and characterize the rate of lipolysis as a compound parameter. A static in-vitro digestion model as well as meta-analysis of literature data has been performed to determine the most influential factors affecting the lipid digestion process. The results demonstrate that lipolysis of emulsions using conjugated BS (NaTC, FFA = 60.0 %, CMC in SIF = 5.58 mM, MSR of linoleic acid = 0.21, rate of adsorption = -0.057 mN/m.s) enhances the release of FFA compared to deconjugated BS (NaDC, FFA = 49.5 %, CMC in SIF = 2.49 mM, MSR of linoleic acid = 0.16 rate of adsorption = -0.064 mN/m.s). These results indicate that conjugation plays an important role in controlling the rate of lipolysis in our organism which can be in turn, tuned by the microflora composition of our gut, ultimately controlling the rate of deconjugation of the BS.

Analysis of the Factors Affecting Static In Vitro Pepsinolysis of Food Proteins.

In this meta-analysis, we collected 58 publications spanning the last seven decades that reported static in vitro protein gastric digestion results. A number of descriptors of the pepsinolysis process were extracted, including protein type; pepsin activity and concentration; protein concentration; pH; additives; protein form (e.g., 'native', 'emulsion', 'gel', etc.); molecular weight of the protein; treatment; temperature; and half-times (HT) of protein digestion. After careful analysis and the application of statistical techniques and regression models, several general conclusions could be extracted from the data. The protein form to digest the fastest was 'emulsion'. The rate of pepsinolysis in the emulsion was largely independent of the protein type, whereas the gastric digestion of the native protein in the solution was strongly dependent on the protein type. The pepsinolysis was shown to be strongly dependent on the structural components of the proteins digested-specifically, ß-sheet-inhibited and amino acid, leucine, methionine, and proline-promoted digestion. Interestingly, we found that additives included in the digestion mix to alter protein hydrolysis had, in general, a negligible effect in comparison to the clear importance of the protein form or additional treatment. Overall, the findings allowed for the targeted creation of foods for fast or slow protein digestion, depending on the nutritional needs.

Importance of Bile Composition for Diagnosis of Biliary Obstructions.

Determination of the cause of a biliary obstruction is often inconclusive from serum analysis alone without further clinical tests. To this end, serum markers as well as the composition of bile of 74 patients with biliary obstructions were determined to improve the diagnoses. The samples were collected from the patients during an endoscopic retrograde cholangiopancreatography (ERCP). The concentration of eight bile salts, specifically sodium cholate, sodium glycocholate, sodium taurocholate, sodium glycodeoxycholate, sodium chenodeoxycholate, sodium glycochenodeoxycholate, sodium taurodeoxycholate, and sodium taurochenodeoxycholate as well as bile cholesterol were determined by HPLC-MS. Serum alanine aminotransferase (ALT), aspartate transaminase (AST), and bilirubin were measured before the ERCP. The aim was to determine a diagnostic factor and gain insights into the influence of serum bilirubin as well as bile salts on diseases. Ratios of conjugated/unconjugated, primary/secondary, and taurine/glycine conjugated bile salts were determined to facilitate the comparison to literature data. Receiver operating characteristic (ROC) curves were determined, and the cut-off values were calculated by determining the point closest to (0,1). It was found that serum bilirubin was a good indicator of the type of biliary obstruction; it was able to differentiate between benign obstructions such as choledocholithiasis (at the concentration of >11 µmol/L) and malignant changes such as pancreatic neoplasms or cholangiocarcinoma (at the concentration of >59 µmol/L). In addition, it was shown that conjugated/unconjugated bile salts confirm the presence of an obstruction. With lower levels of conjugated/unconjugated bile salts the possibility for inflammation and, thus, neoplasms increase.

Importance of Conjugation of the Bile Salt on the Mechanism of Lipolysis.

We aim to advance the discussion on the significance of the conjugation of bile salts (BS) in our organism. We hypothesize that conjugation influences the rate of lipolysis. Since the rate of lipolysis is a compound parameter, we compare the effect of conjugation on four surface parameters, which contribute to the rate. Since deconjugation is due to gut microbiota, we hypothesize that microbiota may affect the rate of lipolysis. A meta-analysis of literature data of critical micelle concentration, ß, aggregation number, and molar solubilization ratio has been performed for the first time. In addition, critical micelle concentration (CMC), interfacial tension, and lipolysis rate measurements were performed. It was found that the unconjugated BS in mixed micelles increases the antagonism between the BS, therefore, increasing the CMC. This correlated with the effect of unconjugated BS on the solubilization capacity of mixed micelles. The collected literature information indicates that the role of the BS and its conjugation in our organism is a key factor influencing the functioning of our organism, where too high levels of unconjugated BS may lead to malabsorption of fat-soluble nutrients. The experimental lipolysis results irrevocably showed that conjugation is a significant factor influencing the rate.

Towards Rational Biosurfactant Design-Predicting Solubilization in Rhamnolipid Solutions.

The efficiency of micellar solubilization is dictated inter alia by the properties of the solubilizate, the type of surfactant, and environmental conditions of the process. We, therefore, hypothesized that using the descriptors of the aforementioned features we can predict the solubilization efficiency, expressed as molar solubilization ratio (MSR). In other words, we aimed at creating a model to find the optimal surfactant and environmental conditions in order to solubilize the substance of interest (oil, drug, etc.). We focused specifically on the solubilization in biosurfactant solutions. We collected data from literature covering the last 38 years and supplemented them with our experimental data for different biosurfactant preparations. Evolutionary algorithm (EA) and kernel support vector machines (KSVM) were used to create predictive relationships. The descriptors of biosurfactant (logPBS, measure of purity), solubilizate (logPsol, molecular volume), and descriptors of conditions of the measurement (T and pH) were used for modelling. We have shown that the MSR can be successfully predicted using EAs, with a mean R2 val of 0.773 ± 0.052. The parameters influencing the solubilization efficiency were ranked upon their significance. This represents the first attempt in literature to predict the MSR with the MSR calculator delivered as a result of our research.

Bile salts in digestion and transport of lipids.

Because of their unusual chemical structure, bile salts (BS) play a fundamental role in intestinal lipid digestion and transport. BS have a planar arrangement of hydrophobic and hydrophilic moieties, which enables the BS molecules to form peculiar self-assembled structures in aqueous solutions. This molecular arrangement also has an influence on specific interactions of BS with lipid molecules and other compounds of ingested food and digestive media. Those comprise the complex scenario in which lipolysis occurs. In this review, we discuss the BS synthesis, composition, bulk interactions and mode of action during lipid digestion and transport. We look specifically into surfactant-related functions of BS that affect lipolysis, such as interactions with dietary fibre and emulsifiers, the interfacial activity in facilitating lipase and colipase anchoring to the lipid substrate interface, and finally the role of BS in the intestinal transport of lipids. Unravelling the roles of BS in the processing of lipids in the gastrointestinal tract requires a detailed analysis of their interactions with different compounds. We provide an update on the most recent findings concerning two areas of BS involvement: lipolysis and intestinal transport. We first explore the interactions of BS with various dietary fibres and food emulsifiers in bulk and at interfaces, as these appear to be key aspects for understanding interactions with digestive media. Next, we explore the interactions of BS with components of the intestinal digestion environment, and the role of BS in displacing material from the oil-water interface and facilitating adsorption of lipase. We look into the process of desorption, solubilisation of lipolysis, products and formation of mixed micelles. Finally, the BS-driven interactions of colloidal particles with the small intestinal mucus layer are considered, providing new findings for the overall assessment of the role of BS in lipid digestion and intestinal transport. This review offers a unique compilation of well-established and most recent studies dealing with the interactions of BS with food emulsifiers, nanoparticles and dietary fibre, as well as with the luminal compounds of the gut, such as lipase-colipase, triglycerides and intestinal mucus. The combined analysis of these complex interactions may provide crucial information on the pattern and extent of lipid digestion. Such knowledge is important for controlling the uptake of dietary lipids or lipophilic pharmaceuticals in the gastrointestinal tract through the engineering of novel food structures or colloidal drug-delivery systems.

Transdermal transport of collagen and hyaluronic acid using water in oil microemulsion.

Collagen and hyaluronic acid (HA) are biopolymers that affect the appearance and condition of the skin. Delivery of these compounds into the skin is highly challenging since have a number of disadvantageous properties, such as high molecular weight and hydrophilicity. Here, we evaluated the transdermal penetration of low and high molecular weight collagen and HA from microemulsions. A number of microemulsion formulations, differing in the content of polymers and surfactants (i.e. penetration promoters), were used for the permeation study. In addition, a correlation was made between the composition of these microemulsions and the polymers transport efficiency. The results indicate that, microemulsions enable transdermal permeation of collagen and HA. The concentration of polymers and the solubilization capacity of microemulsions had the greatest influence on the permeation. Surprisingly, the molecular weight of polymers and the content of other components affected the size of microemulsion particles, and thus these parameters had an indirect influence on the permeation process. This study demonstrated therefore the potential therapeutic use of microemulsion with collagen and HA in improving and regenerating the barrier of aged or diseased skin.

Ultimate biodegradability and ecotoxicity of orally administered antidiabetic drugs.

Hypoglycaemic pharmaceuticals are recently more and more frequently detected in the environment. In our previous study, we have shown that even though many of them undergo significant primary degradation some are transformed to stable products or undergo such transformation that a large part of the structure is still preserved. One of the main routes of elimination from wastewaters or surface waters is biodegradation and a lack thereof leads to accumulation in the environment. Within this work we tested the ultimate biodegradability of six oral antidiabetics: metformin and its main metabolite guanylurea, acarbose, glibenclamide, gliclazide, glimepiride and repaglinide. We also compared the experimental results obtained in this and accompanying work with models designed to predict biodegradability and showed that these models are only moderately successful. Additionally, we examined these compounds in acute Daphnia magna test to check if they might pose an ecotoxicological threat. Combining the results of biodegradability and toxicity tests allows a preliminary assessment of their potential environmental impact.

Primary degradation of antidiabetic drugs.

Type 2 diabetes is a chronic disease affecting a large portion of the world population and is treated by orally administered drugs. Since these drugs are often taken in high doses and are excreted unchanged or partially metabolised many of them are nowadays detected in surface waters or wastewater treatment plants effluents. Unmetabolised antidiabetics or some of their transformation products retain their pharmacological activity, therefore their presence in the environment is highly undesired. One of the main routes of elimination from wastewaters or surface waters is biodegradation. Within this work we tested primary biodegradation of: metformin and its metabolite guanylurea, acarbose, glibenclamide, gliclazide and glimepiride. We also inspected what might be the extent of the degradation by examining the products formed during the degradation using liquid chromatography coupled to tandem mass spectrometry. Transformation of diabetes staple drug metformin to dead-end product guanylurea was generally confirmed. An alternative, though rather minor pathway leading to complete mineralisation was also found. Complete primary degradation was observed for acarbose, glibenclamide and glimepiride whereas gliclazide was shown to be resistant to biodegradation. These results allow a preliminary assessment of environmental persistency of a very important group of pharmaceuticals and show need for implementing monitoring programs.

Protection and viability of fruit seeds oils by nanostructured lipid carrier (NLC) nanosuspensions.

In this paper, we focused on the development of nanostructured lipid carriers (NLCs) for dermal application. The NLC matrix was designed as a protective reservoir of biological active compounds that naturally occur in domestic fruit seed oils. Over the years, emulsions, as a popular physicochemical form of personal care products, were refined in order to obtain the best possible penetration into the skin of any bioactive compound introduced in the formulation, such as polyunsaturated fatty acids (PUFAs). In fact, the bioactive components are useful only if they are able to penetrate the skin unchanged. Therefore, an alternate way to deliver naturally occurring PUFAs is needed. NLCs present a novel delivery and protection system for the PUFAs. The cold pressed fruit seed oils obtained from waste material were used in this paper: blackcurrant, blackberry, raspberry, strawberry and plum. Thermodynamic (DSC) and structural techniques ((1)H NMR) were applied in order to characterize the obtained systems in terms of seed oil incorporation into the NLC, and oxidative stability tests were used to confirm the protective quality of the systems. During the formulation optimization process the most stable nanosuspension with the best seed oil incorporation was a mixture of 4% nonionic emulsifiers, 88% water and 6% lipids with a ratio of 6:2, wax:oil. The oxidative stability tests showed that the NLC was an effective method of protection of the PUFAs.

Modeling the influence of salts on the critical micelle concentration of ionic surfactants.

We show for the first time that a phenomenological, augmented volume-based thermodynamics (aVBT) model is capable to predict the critical micelle concentrations of ionic surfactants, including ionic liquids, with added salts. The model also adjusts for the type of salt added by including its molecular volume, which might form a connection to the Hofmeister effect. The other physico-chemically relevant quantities included in the model include surface area and solvation enthalpies.

Ionic liquid assisted dissolution of dissolved organic matter and PAHs from soil below the critical micelle concentration.

Increased use and production of ionic liquids (ILs) may result in emissions into the environment. Particularly vulnerable are industrial areas and landfills where ILs are utilized and ultimately disposed of. This study investigates how IL contamination can affect soil properties and the sorption of pre-existing contaminants. The commonly used IL 1-methyl-3-octyl imidazolium chloride ([OMIM][Cl]) was added at various quantities to a landfill soil contaminated with polycyclic aromatic hydrocarbons (PAHs). Subsequently, the release of PAHs and dissolved organic matter (DOM) from this soil was thoroughly investigated. Two fractions of PAH release into the porewater were measured, the freely dissolved fraction (measured using a passive sampler) and the total PAH concentration (which includes the freely dissolved molecules as well as those associated with colloids, micelles and DOM). As expected the highest levels of total PAH porewater concentration occurred when the critical micelle concentration (CMC) of the IL was exceeded. However, as we report here for the first time, enhanced amounts of freely dissolved PAHs were released by sub-CMC concentrations of IL. Additionally, enhanced levels of DOM, due to dissolution of soil organic matter by IL, were also observed upon addition of sub-CMC IL concentrations. Based on this, enhanced release of pre-existing contaminants and DOM is suggested as a potential risk from IL emissions at trace concentrations well below the CMC. Potential mechanisms of this sub-CMC release are discussed.

Toxicity of ionic liquid cations and anions towards activated sewage sludge organisms from different sources -- consequences for biodegradation testing and wastewater treatment plant operation.

Ionic liquids (ILs) have attracted great interest in academia and industry during the last decade. So far, several ILs have been used in technological processes, from small scale to industrial applications, which makes it more and more likely that they will be released into the environment. Researchers have been actively studying the environmental and toxicological behaviour of ILs, but their influence on the activated sludge communities of wastewater treatment plants have yet to be investigated. This study aims to fill this knowledge gap by systematically investigating the influence of ILs on activated sewage sludge communities. We tested the inhibition of activated sludge respiration (according to OECD guideline 209) by a selection of 19 different compounds covering the chemical space of ILs as comprehensively as possible. To elicit the differences in sensitivities/tolerances towards ILs we investigated activated sludge from different domestic and industrial sources. Generally speaking, the structure activity relationships of IL toxicity towards activated sludge are in good agreement with those found for other organisms and test systems. The inhibitory potential of tested ILs substituted with short alkyl chains (≤ 4) and polar anions was low. On the other hand, the toxic effects of highly hydrophobic ionic cations and anions were greater - IC50 values were low, some < 50 µM (<10 mg L(-1)). We were able to demonstrate that the EC50 values from Vibrio fischeri can be used for a reliable assessment of the sludge inhibition potential of tested ILs. All the results are discussed in the context of their consequences for biodegradation processes and the performance of wastewater treatment plants.

Solubilization of benzene, toluene, and xylene (BTX) in aqueous micellar solutions of amphiphilic imidazolium ionic liquids.

Water-soluble ionic liquids may be considered analogues to cationic surfactants with a corresponding surface activity and ability to create organized structures in aqueous solutions. For the first time, the enhanced solubility of the aromatic hydrocarbons, benzene, toluene, and xylene, in aqueous micellar systems of 1-alkyl-3-methylimidazolium chlorides was investigated. Above a critical micelle concentration, a gradual increase in the concentration of aromatic hydrocarbons in the miceller solution was observed. This phenomenon was followed by means of the molar solubilization ratio, the micellar/water partition coefficient, and the number of solubilizate molecules per IL micelle. The molar solubilization ratio for ionic liquid micelles was found to be significantly higher when compared to that of ionic surfactants of similar chain length. The incorporation of the hydrocarbon into the micelle affects also an increase of the aggregation number.

Changes in zeta potential of imidazolium ionic liquids modified minerals--Implications for determining mechanism of adsorption.

As the amount of industrial processes involving ionic liquids (ILs) increase the question of their environmental fate awaits an answer. Should ILs become a source of pollution they will primarily be found in soils and water. Interaction of imidazolium IL with soils is a complex interplay of many parameters making predicting their fate and mobility a challenging task. In order to shed more light on the mechanism of adsorption in soils we examined the interactions of imidazolium ILs with the major component of soils, namely mineral fraction. Within this work adsorption on kaolinite and quartz was investigated in terms of adsorption isotherms, partition coefficients and changes of zeta potentials of clays modified by ILs aggregates. The zeta potential was found to be dependent on the alkyl chain length of the imidazolium homologues. It can therefore be concluded that although adsorption seems to rely on electrostatic attraction, at least in the initial stage, the hydrophobicity of molecules is just as significant.

Interaction of Novel Ionic Liquids with Soils.

With the constant development of new ionic liquids, the understanding of the chemical fate of these compounds also needs to be updated. To this effect, the interaction of a number of novel ionic liquids with soils was determined. Therefore, three novel headgroups (ammonium, phosphonium, or pyrrolidinium) with single or quaternary substitution were tested on a variety of soils with high-to-low organic matter content and high-to-low cation exchange capacity, thereby trying to capture the full range of possible soil interactions. It was found that the ionic liquids with single butyl alkyl chain interacted more strongly with the soils (especially with a higher cation exchange capacity), at lower concentrations, than the quad-substituted ionic liquids. However, the quad-substituted ionic liquids interacted more strongly at higher concentrations, due to the double-layer formation, and induced stronger dipole interaction with previously sorbed molecules.

Determination of LFER descriptors of 30 cations of ionic liquids--progress in understanding their molecular interaction potentials.

In order to understand molecular interaction potentials of 30 cations of ionic liquids (ILs), the well-known linear free energy relationship concept (LFER) was applied. The LFER descriptors for the excess molar refractivity and the molar volume were calculated in silico and for hydrogen-bonding acidity and basicity, and the polarizability/dipolarity of IL cations were experimentally determined through high performance liquid chromatography (HPLC) measurements. For the study, three different columns (RP-select B, Cyan, and Diol) and buffered mobile phases, based on two organic solvents acetonitrile (ACN) and methanol (MeOH), were selectively combined to the HPLC separation systems RP-select B-ACN, RP-select B-MeOH, Cyan-MeOH, Diol-ACN, and Diol-MeOH. By measuring the retention factors of 45 neutral calibration compounds and calculating LFER descriptors of three cations in the HPLC systems, the system parameters, including an ionic z coefficient, were determined. Conversely, the LFER descriptors of 30 ionic liquid cations were determined, based on the parameters of five systems and their retention factors in the HPLC systems. The results showed that the type of head group, alkyl chain length and further substituents of the cation have a significant influence on the dipolarity/polarizability and the hydrogen-bonding acidity, and functionalized groups (hydroxyl, ether, and dimethylamino) lead to hydrogen-bonding basicity of the cation. The characterization of cationic LFER descriptors opens up the chance for a more quantitative understanding of molecular interaction potentials and physicochemical properties of ILs.

Influence of microbial adaption and supplementation of nutrients on the biodegradation of ionic liquids in sewage sludge treatment processes.

As ionic liquids are winning more attention from industry as a replacement of more hazardous chemicals, some of their structures have the potential to become persistent pollutants due to high stability towards abiotic and biotic degradation processes. Therefore it is important to determine the hazard associated with the presence of ILs in the environment, for example biodegradation under real conditions. Standard biodegradation testing procedures generally permit pre-conditioning of inoculum but do not allow for pre-exposition to the test substance. These are usually conducted in a mineral medium which does not provide additional organic nutrients. Though very valuable, as a point of reference, these tests do not fully represent real conditions. In in situ conditions, for example in wastewater treatment plants or natural soils and water bodies, the presence of readily available sources of energy and nutrients as well as the process of adaptation may often alter the fate and metabolic pathways of xenobiotics. Our results have shown that these are the opposing processes influencing the biodegradation rate of ILs in sewage sludge. The results have significant practical implications with respect to the assessment of biodegradability and environmental fate of ILs and other xenobiotics in environmental conditions and their potential remediation options.

Influence of the Hofmeister anions on self-organization of 1-decyl-3-methylimidazolium chloride in aqueous solutions.

Inorganic salts usually influence water structure affecting the hydration of the molecules which lead to a salting-in or a salting-out effect of hydrophobic compounds. Specific conductivity and isothermal titration calorimetry have been used to study the effect of inorganic salts on aggregation of the cationic surfactant 1-decyl-3-methylimidazolium chloride in aqueous solutions. The effect of the concentration, the nature of the anion and temperature on micelle formation were studied. A decreasing critical micelle concentration (CMC) due to the weakening electrostatic repulsion between the headgroups was observed. The salts used in this investigation decreased the CMC and degree of micelle ionization in the order of Cl(-)