Component-Level Residential Building Material Stock Characterization Using Computer Vision Techniques.

Residential building material stock constitutes a significant part of the built environment, providing crucial shelter and habitat services. The hypothesis concerning stock mass and composition has garnered considerable attention over the past decade. While previous research has mainly focused on the spatial analysis of building masses, it often neglected the component-level stock analysis or where heavy labor cost for onsite survey is required. This paper presents a novel approach for efficient component-level residential building stock accounting in the United Kingdom, utilizing drive-by street view images and building footprint data. We assessed four major construction materials: brick, stone, mortar, and glass. Compared to traditional approaches that utilize surveyed material intensity data, the developed method employs automatically extracted physical dimensions of building components incorporating predicted material types to calculate material mass. This not only improves efficiency but also enhances accuracy in managing the heterogeneity of building structures. The results revealed error rates of 5 and 22% for mortar and glass mass estimations and 8 and 7% for brick and stone mass estimations, with known wall types. These findings represent significant advancements in building material stock characterization and suggest that our approach has considerable potential for further research and practical applications. Especially, our method establishes a basis for evaluating the potential of component-level material reuse, serving the objectives of a circular economy.

Ligand Size and Carbon-Chain Length Study of Silver Carboxylates in Focused Electron-Beam-Induced Deposition.

Gas-assisted focused electron-beam-induced deposition is a versatile tool for the direct writing of complex-shaped nanostructures with unprecedented shape fidelity and resolution. While the technique is well-established for various materials, the direct electron beam writing of silver is still in its infancy. Here, we examine and compare five different silver carboxylates, three perfluorinated: [Ag2(µ-O2CCF3)2], [Ag2(µ-O2CC2F5)2], and [Ag2(µ-O2CC3F7)2], and two containing branched substituents: [Ag2(µ-O2CCMe2Et)2] and [Ag2(µ-O2CtBu)2], as potential precursors for focused electron-beam-induced deposition. All of the compounds show high sensitivity to electron dissociation and efficient dissociation of Ag-O bonds. The as-deposited materials have silver contents from 42 at.% to above 70 at.% and are composed of silver nano-crystals with impurities of carbon and fluorine between them. Precursors with the shortest carbon-fluorine chain ligands yield the highest silver contents. In addition, the deposited silver content depends on the balance of electron-induced ligand co-deposition and ligand desorption. For all of the tested compounds, low electron flux was related to high silver content. Our findings demonstrate that silver carboxylates constitute a promising group of precursors for gas-assisted focused electron beam writing of high silver content materials.

Inhibition of Vesicular Glutamate Transporters (VGLUTs) with Chicago Sky Blue 6B Before Focal Cerebral Ischemia Offers Neuroprotection.

Brain ischemia is one of the leading causes of death and long-term disability in the world. Interruption of the blood supply to the brain is a direct stimulus for many pathological events. The massive vesicular release of glutamate (Glu) after ischemia onset induces excitotoxicity, which is a potent stress on neurons. Loading of presynaptic vesicles with Glu is the first step of glutamatergic neurotransmission. Vesicular glutamate transporters 1, 2, and 3 (VGLUT1, 2, and 3) are the main players involved in filling presynaptic vesicles with Glu. VGLUT1 and VGLUT2 are expressed mainly in glutamatergic neurons. Therefore, the possibility of pharmacological modulation to prevent ischemia-related brain damage is attractive. In this study, we aimed to determine the effect of focal cerebral ischemia on the spatiotemporal expression of VGLUT1 and VGLUT2 in rats. Next, we investigated the influence of VGLUT inhibition with Chicago Sky Blue 6B (CSB6B) on Glu release and stroke outcome. The effect of CSB6B pretreatment on infarct volume and neurological deficit was compared with a reference model of ischemic preconditioning. The results of this study indicate that ischemia upregulated the expression of VGLUT1 in the cerebral cortex and in the dorsal striatum 3 days after ischemia onset. The expression of VGLUT2 was elevated in the dorsal striatum and in the cerebral cortex 24 h and 3 days after ischemia, respectively. Microdialysis revealed that pretreatment with CSB6B significantly reduced the extracellular Glu concentration. Altogether, this study shows that inhibition of VGLUTs might be a promising therapeutic strategy for the future.

In Situ Time-of-Flight Mass Spectrometry of Ionic Fragments Induced by Focused Electron Beam Irradiation: Investigation of Electron Driven Surface Chemistry inside an SEM under High Vacuum.

Recent developments in nanoprinting using focused electron beams have created a need to develop analysis methods for the products of electron-induced fragmentation of different metalorganic compounds. The original approach used here is termed focused-electron-beam-induced mass spectrometry (FEBiMS). FEBiMS enables the investigation of the fragmentation of electron-sensitive materials during irradiation within the typical primary electron beam energy range of a scanning electron microscope (0.5 to 30 keV) and high vacuum range. The method combines a typical scanning electron microscope with an ion-extractor-coupled mass spectrometer setup collecting the charged fragments generated by the focused electron beam when impinging on the substrate material. The FEBiMS of fragments obtained during 10 keV electron irradiation of grains of silver and copper carboxylates and shows that the carboxylate ligand dissociates into many smaller volatile fragments. Furthermore, in situ FEBiMS was performed on carbonyls of ruthenium (solid) and during electron-beam-induced deposition, using tungsten carbonyl (inserted via a gas injection system). Loss of carbonyl ligands was identified as the main channel of dissociation for electron irradiation of these carbonyl compounds. The presented results clearly indicate that FEBiMS analysis can be expanded to organic, inorganic, and metal organic materials used in resist lithography, ice (cryo-)lithography, and focused-electron-beam-induced deposition and becomes, thus, a valuable versatile analysis tool to study both fundamental and process parameters in these nanotechnology fields.

The g.4290 C>G Polymorphism in the FADS2 Gene Modifies the Fatty Acid Profile of the Pectoralis Superficialis Muscle of Ross 308 Broiler Chickens

The effect of the g.4290 C>G substitution in the FADS2 gene and g.285 C>T in the FABP4 gene on carcass quality, meat quality, and fatty acid profile of the pectoralis superficialis muscle of 238 male broiler chickens reared up to 45 days of age was analyzed. A significant influence of g.4290 C>G in the FADS2 gene on the pectoralis superficialis muscle fatty acid profile was demonstrated. Chickens with the GG genotype were characterized by the highest content of conjugated linoleic acid, amino acids, eicosapentaenoic acids, docosapentaenoic acid, docosahexaenoic acids. and the lowest value of the linoleic acid/alpha-linolenic acid ratio. The FABP4 polymorphism determined only the content of C18:1n-9, C18:2n-6 and docosahexaenoic acid. There was no effect of the studied genotypes on final body weight, carcass quality traits, or quality of broiler pectoral muscles.

Identification of optimal reference genes for gene expression studies in a focal cerebral ischaemia model-Spatiotemporal effects.

A proper reference gene (RG) is required to reliably measure mRNA levels in biological samples via quantitative reverse transcription PCR (RT-qPCR). Various experimental paradigms require specific and stable RGs. In studies using rodent models of brain ischaemia, a variety of genes, such as ß-actin (Actb), hypoxanthine phosphoribosyltransferase 1 (Hprt1), peptidyl-propyl isomerase A (Ppia) and glyceraldehyde-3-phosphate dehydrogenase (Gapdh), are used as RGs. However, most of these genes have not been validated in specific experimental settings. The aim of this study was to evaluate the time- and brain region-dependent expression of RG candidates in a rat model of transient middle cerebral artery occlusion (tMCAO). The following genes were selected: Actb, Hprt1, Ppia, Gapdh, tyrosine 3-monooxygenase/tryptophan 5-monooxygenase activation protein, zeta (Ywhaz) and beta-2 microglobulin (B2m). Focal cerebral ischaemia was induced by 90 min of tMCAO in male Sprague-Dawley rats. Expression was investigated at four time points (12 and 24 h; 3 and 7 days) and in three brain areas (the frontal cortex, hippocampus and dorsal striatum) within the ischaemic brain hemisphere. The RT-qPCR results were analysed using variance analysis and the ΔCt, GeNorm, NormFinder and BestKeeper methods. Data from these algorithms were ranked using the geometric mean of ranks of each analysis. Ppia, Hprt1 and Ywhaz were the most stable genes across the analysed brain areas and time points. B2m and Actb exhibited the greatest fluctuations, and the results for Gapdh were ambiguous.

Detection of Au+ Ions During Fluorine Gas-Assisted Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS) for the Complete Elemental Characterization of Microbatteries.

Due to excellent electric conductivity and chemical inertness, Au can be used in new microdevices for energy applications, microelectronics, and biomedical solutions. However, the chemical analysis of Au-containing systems using time-of-flight secondary ion mass spectrometry (TOF-SIMS) can be difficult because of the negative ionization of Au, as most metals form positive ions, and therefore cannot be detected from the same analytical volume. In this work, we present the potential of fluorine gas coinjection for altering the polarity, from the negative to positive, of Au secondary ions generated under Ga+ beam bombardment. The importance of detecting Au+ ions and representing their spatial distribution in nanoscale was demonstrated using a novel solid electrolyte for Li-ion solid-state batteries, amorphous Li7La3Zr2O12 (aLLZO). This allowed for assessing the migration of mobile Li+ ions outside the aLLZO layer and alloying the Au layer with Li, which explained the presence of an internal electric field observed during the polarization measurements. Remarkably, during fluorine gas-assisted TOF-SIMS measurements, the trace amount of Au content (5 ppm) was detected in a Pt layer (unattainable under standard vacuum conditions). In conclusion, fluorine gas-assisted TOF-SIMS can help understanding operation mechanisms and potential degradation processes of microdevices and therefore help optimizing their functionality.

The Slow-Releasing and Mitochondria-Targeted Hydrogen Sulfide (H2S) Delivery Molecule AP39 Induces Brain Tolerance to Ischemia.

Ischemic stroke is the third leading cause of death in the world, which accounts for almost 12% of the total deaths worldwide. Despite decades of research, the available and effective pharmacotherapy is limited. Some evidence underlines the beneficial properties of hydrogen sulfide (H2S) donors, such as NaSH, in an animal model of brain ischemia and in in vitro research; however, these data are ambiguous. This study was undertaken to verify the neuroprotective activity of AP39, a slow-releasing mitochondria-targeted H2S delivery molecule. We administered AP39 for 7 days prior to ischemia onset, and the potential to induce brain tolerance to ischemia was verified. To do this, we used the rat model of 90-min middle cerebral artery occlusion (MCAO) and used LC-MS/MS, RT-PCR, LuminexTM assays, Western blot and immunofluorescent double-staining to determine the absolute H2S levels, inflammatory markers, neurotrophic factor signaling pathways and apoptosis marker in the ipsilateral frontal cortex, hippocampus and in the dorsal striatum 24 h after ischemia onset. AP39 (50 nmol/kg) reduced the infarct volume, neurological deficit and reduced the microglia marker (Iba1) expression. AP39 also exerted prominent anti-inflammatory activity in reducing the release of Il-1ß, Il-6 and TNFα in brain areas particularly affected by ischemia. Furthermore, AP39 enhanced the pro-survival pathways of neurotrophic factors BDNF-TrkB and NGF-TrkA and reduced the proapoptotic proNGF-p75NTR-sortilin pathway activity. These changes corresponded with reduced levels of cleaved caspase 3. Altogether, AP39 treatment induced adaptative changes within the brain and, by that, developed brain tolerance to ischemia.

Structure, Morphology, Heat Capacity, and Electrical Transport Properties of Ti3(Al,Si)C2 Materials.

A study of Ti3Al1-xSixC2 (x = 0 to x = 1) MAX-phase alloys is reported. The materials were obtained from mixtures of Ti3AlC2 and Ti3SiC2 powders with hot pressing sintering technique. They were characterised with X-ray diffraction, heat capacity, electrical resistivity, and magnetoresistance measurements. The results show a good quality crystal structure and metallic properties with high residual resistivity. The resistivity weakly varies with Si doping and shows a small, positive magnetoresistance effect. The magnetoresistance exhibits a quadratic dependence on the magnetic field, which indicates a dominant contribution from open electronic orbits. The Debye temperatures and Sommerfeld coefficient values derived from specific heat data show slight variations with Si content, with decreasing tendency for the former and an increase for the latter. Experimental results were supported by band structure calculations whose results are consistent with the experiment concerning specific heat, resistivity, and magnetoresistance measurements. In particular, they reveal that of the s-electrons at the Fermi level, those of Al and Si have prevailing density of states and, thus predominantly contribute to the metallic conductivity. This also shows that the high residual resistivity of the materials studied is an intrinsic effect, not due to defects of the crystal structure.

Room Temperature Direct Electron Beam Lithography in a Condensed Copper Carboxylate.

High-resolution metallic nanostructures can be fabricated with multistep processes, such as electron beam lithography or ice lithography. The gas-assisted direct-write technique known as focused electron beam induced deposition (FEBID) is more versatile than the other candidates. However, it suffers from low throughput. This work presents the combined approach of FEBID and the above-mentioned lithography techniques: direct electron beam lithography (D-EBL). A low-volatility copper precursor is locally condensed onto a room temperature substrate and acts as a positive tone resist. A focused electron beam then directly irradiates the desired patterns, leading to local molecule dissociation. By rinsing or sublimation, the non-irradiated precursor is removed, leaving copper-containing structures. Deposits were formed with drastically enhanced growth rates than FEBID, and their composition was found to be comparable to gas-assisted FEBID structures. The influence of electron scattering within the substrate as well as implementing a post-purification protocol were studied. The latter led to the agglomeration of high-purity copper crystals. We present this as a new approach to electron beam-induced fabrication of metallic nanostructures without the need for cryogenic or hot substrates. D-EBL promises fast and easy fabrication results.

Focused Electron Beam-Induced Deposition and Post-Growth Purification Using the Heteroleptic Ru Complex (η3-C3H5)Ru(CO)3Br.

Focused electron beam-induced deposition using the heteroleptic complex (η3-C3H5)Ru(CO)3Br as a precursor resulted in deposition of material with Ru content of 23 at. %. Transmission electron microscopy images indicated a nanogranular structure of pure Ru nanocrystals, embedded into a matrix containing carbon, oxygen, and bromine. The deposits were purified by annealing in a reactive 98% N2/2% H2 atmosphere at 300 °C, resulting in a reduction of contaminants and an increase of the Ru content to 83 at. %. Although a significant volume loss of 79% was found, the shrinkage was observed mostly for vertical thickness (around 75%). The lateral dimensions decreased much less significantly (around 9%). Deposition results, in conjunction with previous gas-phase and condensed-phase surface studies on the electron-induced reactions of (η3-C3H5)Ru(CO)3Br, provide insights into the behavior of allyl, carbonyl, and bromide ligands under identical electron beam irradiation.

Towards the third dimension in direct electron beam writing of silver.

Carboxylates constitute an extremely promising class of precursor compounds for the electron beam induced deposition of silver. In this work both silver 2,2-dimethylbutyrate and silver pentafluoropropionate were investigated with respect to their dwell-time-dependent deposition behavior and growth characteristics. While silver 2,2-dimethylbutyrate showed a strong depletion in the center of the impinging electron beam profile hindering any vertical growth, silver pentafluoropropionate indicated a pronounced dependency of the deposit height on the dwell time. Truly three-dimensional silver structures could be realized with silver pentafluoropropionate. The pillars were polycrystalline with silver contents of more than 50 atom % and exhibit strong Raman enhancement. This constitutes a promising route towards the direct electron beam writing of three-dimensional plasmonic device parts from the gas phase.

Gas-assisted silver deposition with a focused electron beam.

Focused electron beam induced deposition (FEBID) is a flexible direct-write method to obtain defined structures with a high lateral resolution. In order to use this technique in application fields such as plasmonics, suitable precursors which allow the deposition of desired materials have to be identified. Well known for its plasmonic properties, silver represents an interesting candidate for FEBID. For this purpose the carboxylate complex silver(I) pentafluoropropionate (AgO2CC2F5) was used for the first time in FEBID and resulted in deposits with high silver content of up to 76 atom %. As verified by TEM investigations, the deposited material is composed of pure silver crystallites in a carbon matrix. It showed good electrical properties and a strong Raman signal enhancement. Interestingly, silver crystal growth presents a strong dependency on electron dose and precursor refreshment.

Direct Electron Beam Writing of Silver-Based Nanostructures.

Direct writing utilizing a focused electron beam constitutes an interesting alternative to resist-based techniques, as it allows for precise and flexible growth onto any conductive substrate in a single-step process. One important challenge, however, is the identification of appropriate precursors which allow for deposition of the material of choice, e.g., for envisaged applications in nano-optics. In this regard the coinage metal silver is of particular interest since it shows a relatively high plasma frequency and, thus, excellent plasmonic properties in the visible range. By utilizing the precursor compound AgO2Me2Bu, direct writing of silver-based nanostructures via local electron beam induced deposition could be realized for the first time. Interestingly, the silver deposition was strongly dependent on electron dose; at low doses of 30 nC/µm2 a dominant formation of pure silver crystals was observed, while at higher electron doses around 104 nC/µm2 large carbon contents were measured. A scheme for the enhanced silver deposition under low electron fluxes by an electronic activation of precursor dissociation below thermal CVD temperature is proposed and validated using material characterization techniques. Finally, the knowledge gained was employed to fabricate well-defined two-dimensional deposits with maximized silver content approaching 75 at. %, which was achieved by proper adjustment of the deposition parameters. The corresponding deposits consist of plasmonically active silver crystallites and demonstrate a pronounced Raman signal enhancement of the carbonaceous matrix.