Functional ibuprofen-loaded cationic nanoemulsion: Development and optimization for dry eye disease treatment.

Inflammation plays a key role in dry eye disease (DED) affecting millions of people worldwide. Non-steroidal anti-inflammatory drugs (NSAIDs) can be used topically to act on the inflammatory component of DED, but their limited aqueous solubility raises formulation issues. The aim of this study was development and optimization of functional cationic nanoemulsions (NEs) for DED treatment, as a formulation approach to circumvent solubility problems, prolong drug residence at the ocular surface and stabilize the tear film. Ibuprofen was employed as the model NSAID, chitosan as the cationic agent, and lecithin as the anionic surfactant enabling chitosan incorporation. Moreover, lecithin is a mixture of phospholipids including phosphatidylcholine and phosphatidylethanolamine, two constituents of the natural tear film important for its stability. NEs were characterized in terms of droplet size, polydispersity index, zeta-potential, pH, viscosity, osmolarity, surface tension, entrapment efficiency, stability, sterilizability and in vitro release. NEs mucoadhesive properties were tested rheologically after mixing with mucin dispersion. Biocompatibility was assessed employing 3D HCE-T cell-based model and ex vivo model using porcine corneas. The results of our study pointed out the NE formulation with 0.05% (w/w) chitosan as the lead formulation with physicochemical properties adequate for ophthalmic application, mucoadhesive character and excellent biocompatibility.

Cryocornea - toward enhancing the capacity and throughput of ex vivo corneal model.

Objective: The objective of this study was to investigate the effects of the concentration of two intracellular (i.e. propylene glycol and glycerol) and four extracellular (i.e. dextran, hydroxypropyl methylcellulose, polyvinylpyrolidone, trehalose) cryoprotective agents as well as the effects of freeze-thawing procedures on the corneal cryoprotection.Significance: The corneal cryopreservation may possibly become the long-term storage technique of choice for collection of animal corneas suitable for ex vivo drug testing.Methods: The integrity of corneal barrier was evaluated by measurements of transepithelial electrical resistance.Results: Under the investigated experimental conditions the best result was obtained for slow freezing (2 h at -20 °C followed by 46 h at -70 °C) and rapid thawing (0.25 h at 34 °C) procedure where 20% (w/V) trehalose in Krebs Ringer buffer solution was used as extracellular cryoprotective agent.Conclusions: The selection of corneal freeze-thawing protocol as well as the optimal type and concentration of a cryoprotective agent allows the cryostorage of porcine corneal tissues with suitable TEER properties (cryocornea).

Preparation of in situ hydrogels loaded with azelaic acid nanocrystals and their dermal application performance study.

Azelaic acid (AZA) is a dicarboxylic acid that is topically used in the treatment of acne and rosacea since it possesses antibacterial and keratolytic activity. The primary objective of this study was to develop an AZA nanocrystal suspension. It is expected that improved solubility and dissolution rate will result in advanced biopharmaceutical properties, primarily the dermal bioavailability. Furthermore, a topical nanocrystal AZA-loaded hydrogels composed of Pluronic® F127 and hyaluronic acid mixture that are able to deliver AZA into the stratum corneum and deeper skin layers were considered. This study was conducted in order to: 1) determine the effect of non-ionic Polysorbate 60 on the stabilization and particle size of the AZA nanocrystals, as well as the effect of Pluronic® F127, used as an in situ gelation agent, and hyaluronic acid on the viscoelastic properties and the drug release of composed hydrogels, 2) determine the relationship between the rheological properties of the gels and the penetration of AZA into the stratum corneum. The composed hydrogels revealed pseudoplastic flow behaviour. The increase in Pluronic® F127 concentration induced a domination of elastic over viscous behaviour of the gels. The gel containing 15% of Pluronic® F127, 1% of hyaluronic acid and lyophilised 10% nanocrystal AZA suspension was considered to be an optimal formulation, since it possessed the rheological and drug delivery properties desirable for an in situ gelling platform for dermal application.

Biopharmaceutical evaluation of surface active ophthalmic excipients using in vitro and ex vivo corneal models.

The objective of this study was to systematically investigate the effects of surface active ophthalmic excipients on the corneal permeation of ophthalmic drugs using in vitro (HCE-T cell-based model) and ex vivo (freshly excised porcine cornea) models. The permeation of four ophthalmic drugs (i.e., timolol maleate, chloramphenicol, diclofenac sodium and dexamethasone) across in vitro and ex vivo corneal models was evaluated in the absence and presence of four commonly used surface active ophthalmic excipients (i.e., Polysorbate 80, Tyloxapol, Cremophor® EL and Pluronic® F68). The concentration and self-aggregation-dependent effects of surface active ophthalmic excipients on ophthalmic drug permeability were studied from the concentration region where only dissolved monomer molecules of surface active ophthalmic excipients exist, as well as the concentration region in which aggregates of variable size and dispersion are spontaneously formed. Neither the surface active ophthalmic excipients nor the ophthalmic drugs at all concentrations that were tested significantly affected the barrier properties of both corneal models, as assessed by transepithelial electrical resistance (TEER) monitoring during the permeability experiments. The lowest concentration of all investigated surface active ophthalmic excipients did not significantly affect the ophthalmic drug permeability across both of the corneal models that were used. For three ophthalmic drugs (i.e., chloramphenicol, diclofenac sodium and dexamethasone), depressed in vitro and ex vivo permeability were observed in the concentration range of either Polysorbate 80, Tyloxapol, Cremophor® EL or Pluronic® F68, at which self-aggregation is detected. The effect was the most pronounced for Cremophor® EL (1 and 2%, w/V) and was the least pronounced for Pluronic® F68 (1%, w/V). However, all surface active ophthalmic excipients over the entire concentration range that was tested did not significantly affect the in vitro and ex vivo permeability of timolol maleate, which is the most hydrophilic ophthalmic drug that was investigated. The results of the dynamic light scattering measurements point to the association of ophthalmic drugs with self-aggregates of surface active ophthalmic excipients as the potential mechanism of the observed permeability-depressing effect of surface active ophthalmic excipients. A strong and statistically significant correlation was observed between in vitro and ex vivo permeability of ophthalmic drugs in the presence of surface active ophthalmic excipients, which indicates that the observed permeability-altering effects of surface active ophthalmic excipients were comparable and were mediated by the same mechanism in both corneal models.

Lipid/alginate nanoparticle-loaded in situ gelling system tailored for dexamethasone nasal delivery.

In this study, we suggest the development of nanoparticle loaded in situ gelling system suitable for corticosteroid nasal delivery. We propose lipid/alginate nanoparticles (size 252.3±2.4nm, polydispersity index 0.241, zeta-potential -31.7±1.0mV, dexamethasone (Dex) content 255±7µgml-1) dispersed in pectin solution (5mgml-1) that undergoes a sol-gel phase transition triggered by Ca2+ present in nasal mucosa. The viscoelasticity of gel obtained by mixing nanoparticle suspension in pectin continuous phase with simulated nasal fluid (1:1V/V) is characterised by a log-linear shear thinning viscosity behaviour. Observed viscosity corresponds to the range of viscosities of nasal mucus at physiological as well as under disease conditions. Nanoparticle-loaded gel was biocompatible with the selected epithelial cell model and, in comparison to dexamethasone solution, provided reduction in Dex release (t50% 2.1h and 0.6h, respectively) and moderated transepithelial permeation in vitro (Papp 7.88±0.15 and 9.73±0.57×10-6cms-1, respectively). In conclusion, this study showed the potential of the proposed system to provide local therapeutic effect upon administration of a lower corticosteroid dose and minimize the possibility for adverse effects as it can be easily sprayed as solution and delivered beyond nasal valve, ensure prolonged contact time with nasal mucosa upon gelation, and moderate corticosteroid release and permeation.

HCE-T cell-based permeability model: A well-maintained or a highly variable barrier phenotype?

The most extensively characterized human-derived cell line used in transcorneal permeability studies, in terms of passive transcellular and paracellular transport, transporter expression and metabolic enzymes, is the immortalized human corneal epithelial cell line (HCE-T). The purpose of this study is to describe the changes in the HCE-T barrier phenotype in vitro when valid cultivation conditions, in accordance with the standardized HCE-T cell-based model protocol, were employed. Evaluation of the structural and functional barrier properties revealed two different HCE-T barrier phenotypes, depending on the polycarbonate membrane pore size. Model I (pore size 0.4µm) was characterized by a multilayered HCE-T epithelium at the apical side and a weak barrier function (70-115Ω×cm2), whereas Model II (pore size 3µm) consisted of an apical lipophilic HCE-T monolayer and a basolateral lipophilic monolayer of migrated HCE-T cells that showed improved barrier properties (1700-2600Ω×cm2) compared with Model I. Considering the permeation of ophthalmic compounds and in vitro/ex vivo correlation, Model II was better able to predict transcorneal drug permeation. This study highlights the important aspects of HCE-T barrier phenotype variability that should be continuously monitored in the routine application of HCE-T cell-based models across both academic and pharmaceutical industry research laboratories.

Tear fluid-eye drops compatibility assessment using surface tension.

OBJECTIVE: To evaluate the compatibility of commercially available eye drop surface tension with the tear film physiological range and to characterize commonly used ophthalmic excipients in terms of their surface activity under eye-biorelevant conditions. SIGNIFICANCE: There are a number of quality requirements for the eye drops (e.g. tonicity, pH, viscosity, refractive index) that needs to comply with the physiological parameters of the eye surface. However, the adjustment of surface tension properties of the eye drops to the normal range of surface tension at the air/tear fluid interface (40-46 mN/m) has received rather less attention thus far. Yet, the surface tension at the air/tear fluid interface is of vital importance for the normal function of the eye surface. METHODS: The surface tension compatibility of the isotonic aqueous solutions of commonly used ophthalmic excipients as well as 18 approved eye drops with the tear fluid have been evaluated using surface tension method. RESULTS: Each ophthalmic ingredient including the preservatives, solubilizing agents and thickening agents can influence the surface tension of the final formulation. In case of complex ophthalmic formulations one should also consider the possible interactions among excipients and consequent impact on overall surface activity. Out of 18 evaluated eye drops, three samples were within, 12 samples were below and three samples were above the physiological range of the tear fluid surface tension. CONCLUSIONS: Our results provide a rationale for clinical studies aiming to assess the correlation between the eye drops surface tension and the tear film (in)stability.

Nanoparticle-mediated interplay of chitosan and melatonin for improved wound epithelialisation.

Herein, we propose an innovative approach to improving wound healing. Our strategy is to deliver melatonin locally at the wound site by means of lecithin/chitosan nanoparticles. We used four types of chitosan that differed in terms of molecular weight and/or deacetylation degree. Melatonin encapsulation efficiency, nanoparticle size, zeta potential, biocompatibility and in vitro drug release were studied as a function of the type of chitosan used in preparation. The nanoparticles were evaluated in terms of their potential to promote wound epithelialisation via an in vitro scratch assay using a human keratinocyte (HaCaT) monolayer. The model wounds were treated with nanoparticle suspensions at a chitosan concentration of 5µgml(-1), which was based on preceding cell biocompatibility studies. Nanoparticles prepared with different types of chitosan showed similar effect on the keratinocyte proliferation/migration. Nanoparticle-mediated interplay of chitosan and melatonin was shown to be crucial for improved wound epithelialisation.

Evaluation of cationic nanosystems with melatonin using an eye-related bioavailability prediction model.

In this study, two types of nanosystems, namely lecithin/chitosan nanoparticles and Pluronic® F127/chitosan micelles, have been prepared and evaluated for their potential for the ocular delivery of melatonin, which is known to exert an ocular hypotensive effect. The melatonin content, particle size, zeta potential and in vitro drug release properties were studied as a function of the presence of chitosan in the nanosystem. Lecithin/chitosan nanoparticles were evaluated in terms of the mucoadhesive properties by a newly established method based on HCE-T cells, also used in in vitro biocompatibility and permeability studies. Lecithin/chitosan nanoparticles were significantly larger than the corresponding F127/chitosan micelles (mean diameter of 241.8 vs. 20.7nm, respectively) and characterised by a higher surface charge (22.7 vs. 4.3mV, respectively). The HCE-T cell viability assay did not show significant toxic effects of nanosystems investigated at the (relevant) chitosan concentration tested. The permeability study results confirmed the permeation enhancing effect of F127, which was hindered in the presence of chitosan. Lecithin/chitosan nanoparticles were characterised by prominent mucoadhesive properties and prolonged melatonin release, which was shown to control melatonin permeation across an in vitro corneal epithelial model. Such properties demonstrate the potential for nanoparticles to provide an extended pre-corneal residence time of melatonin, ensuring higher eye-related bioavailability and extended intraocular pressure reduction compared to melatonin in both aqueous and micelle solutions.