The bevel effect: a prospective, randomized investigation into needle design in dental intraligamentary anesthesia.

OBJECTIVES: This in vivo study aimed to assess the impact of needle bevel design on puncture pain, anesthetic success, and mechanical deformations in intraligamentary injection (ILA) cases, comparing a short triple facet cut (STF) to a triple lancet cut (TL) after single or repetitive use. MATERIALS AND METHODS: In a prospective single-blind trial, 200 ILA needles (STF, n = 100; TL, n = 100) were randomly assigned for dental procedures. Patients received ILA either with STF or TL needles, used once (group A; n = 50 each) or repeatedly (group B; n = 50). Puncture pain was assessed using a numerical rating scale (NRS). Anesthetic success was determined via cold spray (yes/no), and scanning electron microscopy (SEM) analyzed needle tip deformations. RESULTS: Puncture pain did not significantly differ between STF and TL, regardless of needle use or injection area. Success rates were comparable in single use (82% STF vs. 79% TL; p > 0.05). For repetitive use, STF exhibited a significantly higher success rate (80% vs. 69%; p = 0.012). Mechanical deformations were prevalent in 97.5% of needles, with TL showing greater deformations than STF after single and repeated uses. Barbs were more common in TL (90/100) than STF (84/100), with a higher relative risk for barbed-like deformation in TL (RR single use: 1.26; p < 0.001; multiple use: 7.87, p < 0.001). CONCLUSIONS: The short triple facet-designed bevel demonstrated significantly less mechanical deformation, suggesting potential advantages in maintaining needle lumen patency. CLINICAL RELEVANCE: The intraligamentary needle bevel design is linked to mechanical deformation and anesthetic success after repetitive use, but not to puncture pain.

The impact of the COVID-19 pandemic on the dental-maxillofacial emergency service of a German university hospital in the year 2020.

OBJECTIVES: COVID-19 is considered one of the most serious pandemic in history and has posed major challenges to the world's health care. Dentistry and oral and maxillofacial surgery (CMFS) are particularly affected due to direct exposure to the respiratory tract, as the reservoir of SARS-CoV-2. In this study, the impact of the COVID-19-pandemic on a dental and CMFS emergency services in Germany in 2020 was first time investigated and correlated with governmental restriction measures in public life. MATERIALS AND METHODS: Epidemiological data of a German University Hospital were analysed from a total of 8386 patients in 2019 and 2020. Parameters included information on demographics, time, weekday and reason for presentation, as well as diagnosis and therapy performed. Data from 2020 were compared with those from 2019, taking into account the nationwide periods of public life restrictions. RESULTS: In 2020, 22% fewer patients presented via dental and CMFS emergency service. In a monthly comparison, there were negative peaks of up to - 41% in November, but also a plus of 26% in July. The largest decreases were recorded during the lockdown periods in spring (- 33%) and winter (- 39%). Further, a threefold increase in actual emergencies and inpatient admissions revealed during these time periods (p < 0.001). CONCLUSIONS: COVID-19 pandemic had a significant impact on the dental and CMFS emergency service in 2020 resulting in more severe cases. CLINICAL RELEVANCE: This study underlines the importance of maintaining an emergency service system and basic outpatient care in these specialities, which requires uniform recommendations from the medical-dental societies and politics.

Hyperspectral analysis for perioperative perfusion monitoring-a clinical feasibility study on free and pedicled flaps.

OBJECTIVES: In reconstructive surgery, flap monitoring is crucial for early identification of perfusion problems. Using hyperspectral imaging (HSI), this clinical study aimed to develop a non-invasive, objective approach for perfusion monitoring of free and pedicled flaps. MATERIAL AND METHODS: HSI of 22 free (FF) and 8 pedicled flaps (PF) in 30 patients was recorded over time. Parameters assessed were tissue oxygenation/superficial perfusion (0-1 mm) (StO2 (0-100%)), near-infrared perfusion/deep perfusion (0-4 mm) (NIR (0-100)), distribution of haemoglobin (THI (0-100)), and water (TWI (0-100)). Measurements up to 72 h were correlated to clinical assessment. RESULTS: Directly after flap inset, mean StO2 was significantly higher in FF (70.3 ± 13.6%) compared with PF 56.2 ± 14.2% (p = 0.05), whereas NIR, THI, and TWI were similar (NIR_p = 0.82, THI_p = 0.97, TWI_p = 0.27). After 24 h, StO2, NIR, THI, and TWI did not differ between FF and PF. After 48 h, StO2, NIR, and TWI did not differ between FF and PF whereas THI was significantly increased in FF compared with PF(p = 0.001). In three FF, perfusion decreased clinically and in HSI, 36(1), 40(2), 5(3), and 61(3) h after flap inset which was followed by prompt intervention. CONCLUSIONS: StO2 < 40%, NIR < 25/100, and THI < 40/100 indicated arterial occlusion, whereas venous problems revealed an increase of THI. In comparison with FF, perfusion parameters of PF were decreased after flap transfer but remained similar to FF later on. CLINICAL RELEVANCE: HSI provides objective and non-invasive perfusion monitoring after flap transplantation in accordance to the clinical situation. With HSI, signs of deterioration can be detected hours before clinical diagnosis.

Ankylosis of the temporomandibular joint-impression free CAD/CAM based joint replacement using patient-specific implants.

In recent years, alloplastic temporomandibular joint (TMJ) replacement has become a permissible procedure for the reconstruction of severely destroyed TMJs. The use of computer-aided design/computer-aided manufacturing (CAD/CAM) has extended the range of applications to complex anatomical situations. The aim of the treatment is to improve the usually restricted mouth opening and thus oral hygiene and nutrition, which leads to a regular improvement in the general quality of life. The following case report describes the bilateral replacement of ankylotically destroyed TMJs using patient-specific endoprostheses with simultaneous displacement of the maxilla. Innovative in the case described is the impression-free CAD/CAM planning, whereby the upper and lower prostheses were produced on the basis of 3D printed patient models.

Comparative analysis of the impact of e-cigarette vapor and cigarette smoke on human gingival fibroblasts.

Human gingival fibroblasts (HGF) play a vital role in wound healing, oral cancer, and are among the first cells being exposed to e-cigarette vapor (eCV) or cigarette smoke (CS) during inhalation. Although the cell-damaging effect of CS has been well studied, the effects of eCV on gingival cells are still unclear. The aim of this in vitro study was to compare the effects of eCV and CS on HGF in terms of proliferation, metabolic activity, cell death, and formation of reactive oxygen species (ROS). After 24 h cell numbers in CS-exposed cells in contrast to eCV-exposed cells were significantly decreased compared to the control. At later points in time, such differences could no longer be observed. Compared to the control, HGF stimulated with eCV showed a significantly higher metabolic activity 1 h, 24 h, and 48 h after exposure. 24 h after exposure, the metabolic activity was increased in both test groups. No caspase 3/7 activation nor significant differences in the amount of apoptosis/necrosis among the groups were seen. Only in CS-exposed cells ROS formation was increased at 1 h, 3 h, and 6 h after exposition. In conclusion, when compared to conventional CS, a less harmful effect of eCV on HGF can be assumed.

[Digitalization and use of artificial intelligence in microvascular reconstructive facial surgery]. / Digitalisierung und Ansätze künstlicher Intelligenz in der mikrovaskulär-rekonstruktiven Gesichtschirurgie.

BACKGROUND: When using digitalization and artificial intelligence (AI), large amounts of data (big data) are produced, which can be processed by computers and used in the field of microvascular-reconstructive craniomaxillofacial surgery (CMFS). OBJECTIVE: The aim of this article is to summarize current applications of digitalized medicine and AI in microvascular reconstructive CMFS. MATERIAL AND METHODS: Review of frequent applications of digital medicine for microvascular CMFS reconstruction, focusing on digital planning, navigation, robotics and potential applications with AI. RESULTS: The broadest utilization of medical digitalization is in the virtual planning of microvascular transplants, individualized implants and template-guided reconstruction. Navigation is commonly used for ablative tumor surgery but less frequently in reconstructions. Robotics are mainly employed in the transoral approach for tumor surgery of the hypopharynx, whereas the use of AI is still limited even if possible applications would be automated virtual planning and monitoring systems. CONCLUSION: The use of digitalized methods and AI are adjuncts to microvascular reconstruction. Automatization approaches and simplification of technologies will provide such applications to a broader clientele in the future; however, in CMFS, robotic-assisted resections and automated flap monitoring are not yet the standard of care.

Clinical Accuracy of 3D-Planned Maxillary Positioning Using CAD/CAM-Generated Splints in Combination With Temporary Mandibular Fixation in Bimaxillary Orthognathic Surgery.

STUDY DESIGN: The aim of this study was to evaluate the accuracy of 3-dimensional (3D)-planned maxillary positioning by using computer-assisted design (CAD)/computer-assisted manufacturing (CAM) splints combined with temporary mandibular fixation in bimaxillary orthognathic surgery. In orthognathic surgery, customized splints work sufficiently well to transfer preoperative planning into the operation site for transverse und sagittal positioning of the maxilla. The vertical positioning is more difficult due to the non-fixed mandibular reference. Therefore, the combined use of CAD/CAM splints and temporary mandibular fixation to the zygomatic region was applied for transferring the 3D-planned maxillary position into the operation site from 2012 until 2015 in our hospital. OBJECTIVE: In addition to the general accuracy, the precision should therefore be checked especially in the vertical plane compared to axial and sagittal plane. METHODS: In this retrospective study, we calculated the deviation of 5 occlusal landmarks of the maxilla in 35 consecutive patients by fusing preoperative 3D planning images and postoperative computed tomography scans after bimaxillary surgery. RESULTS: The overall median deviation of maxillary positioning between plan and surgical result was 0.99 mm. The accuracy of left-right positioning was median 0.96 mm. Anterior-posterior positioning of the maxilla showed a median accuracy of 0.94 mm. Just slightly higher values were determined for the upward-downward positioning (median 1.06 mm). CONCLUSIONS: This demonstrates the predictability of maxillary positioning by using CAD/CAM splints in combination with temporary mandibular fixation in all 3 axes.

Facial cutaneous squamous cell carcinoma - microscopic safety margins and their impact on developing local recurrences.

OBJECTIVES: Surgical excision remains the treatment of choice for facial cutaneous squamous cell carcinoma (cSCC) despite there being no generally accepted diameter of clear margins. Therefore, the aim of this study was to evaluate the impact of microscopic clear margins diameter (mCMD) with respect to the development of local recurrences (LR). MATERIALS AND METHODS: The medical records of 99 patients with a total of 142 cases of facial cSCC, who underwent surgical treatment between January 2010 and December 2015, were reviewed for demographic data and clinicopathological features. RESULTS: 100 cases were diagnosed as primary cSCC and 42 cases as secondary cSCC. Of these, nine (6.3%) developed LR. Mean time to LR was 20 months, with the cheek as the predominant site 55.5% (n = 5). Wound closure was either primary (56%) or secondary (44%), depending on the site. Although no significant correlation between mCMD and LR was found (rPearson = 0.029; rPearson = 0.015), >4.1 mm was shown to be a negative cut-off-value (horizontally and vertically) without LR (100% vs 0%). CONCLUSIONS: Based on these results, however descriptive they are, the authors consider histological confirmation of clear margins to be necessary for reducing the formation of LR. Thus, consistent testing and histopathological reporting, in a multicentered effort, are needed to further clarify the role of mCMD in the development of cSCC-LR.

Effects of interfacial micromotions on vitality and differentiation of human osteoblasts.

OBJECTIVES: Enhanced micromotions between the implant and surrounding bone can impair osseointegration, resulting in fibrous encapsulation and aseptic loosening of the implant. Since the effect of micromotions on human bone cells is sparsely investigated, an in vitro system, which allows application of micromotions on bone cells and subsequent investigation of bone cell activity, was developed. METHODS: Micromotions ranging from 25 µm to 100 µm were applied as sine or triangle signal with 1 Hz frequency to human osteoblasts seeded on collagen scaffolds. Micromotions were applied for six hours per day over three days. During the micromotions, a static pressure of 527 Pa was exerted on the cells by Ti6Al4V cylinders. Osteoblasts loaded with Ti6Al4V cylinders and unloaded osteoblasts without micromotions served as controls. Subsequently, cell viability, expression of the osteogenic markers collagen type I, alkaline phosphatase, and osteocalcin, as well as gene expression of osteoprotegerin, receptor activator of NF-κB ligand, matrix metalloproteinase-1, and tissue inhibitor of metalloproteinase-1, were investigated. RESULTS: Live and dead cell numbers were higher after 25 µm sine and 50 µm triangle micromotions compared with loaded controls. Collagen type I synthesis was downregulated in respective samples. The metabolic activity and osteocalcin expression level were higher in samples treated with 25 µm micromotions compared with the loaded controls. Furthermore, static loading and micromotions decreased the osteoprotegerin/receptor activator of NF-κB ligand ratio. CONCLUSION: Our system enables investigation of the behaviour of bone cells at the bone-implant interface under shear stress induced by micromotions. We could demonstrate that micromotions applied under static pressure conditions have a significant impact on the activity of osteoblasts seeded on collagen scaffolds. In future studies, higher mechanical stress will be applied and different implant surface structures will be considered.Cite this article: J. Ziebart, S. Fan, C. Schulze, P. W. Kämmerer, R. Bader, A. Jonitz-Heincke. Effects of interfacial micromotions on vitality and differentiation of human osteoblasts. Bone Joint Res 2018;7:187-195. DOI: 10.1302/2046-3758.72.BJR-2017-0228.R1.

Prospective clinical study comparing intraligamentary anesthesia and inferior alveolar nerve block for extraction of posterior mandibular teeth.

OBJECTIVES: The aim of the study was to compare the efficacy of intraligamentary anesthesia (ILA) with conventional inferior alveolar nerve block (IANB) for extraction of mandibular posterior teeth. MATERIALS AND METHODS: In a prospective clinical trial, a total of 301 mandibular posterior teeth were extracted in 266 patients. Randomization was conducted into those who received ILA (patients n = 98; teeth n = 105) and those who received IANB (patient n = 140; teeth n = 140). Twenty-eight patients were subjected to bilateral mandibular dental extractions and received both ILA und IANB (teeth n = 56 (ILA n = 28; IANB n = 28)). The primary objective was to evaluate the differences in pain during injection, in pain during tooth extraction (numeric rating scale (NRS)), and in anesthetic quality (complete/sufficient vs. insufficient/no effect). Differences in latency time, amount of anesthetic solution, need for second injection, and duration of local numbness as well as in the incidence of dry socket were assessed. RESULTS: ILA had significant lower pain of injection (p < 0.001), shorter latency time (p < 0.001), and shorter duration of local numbness (p < 0.001) and required lesser amount of local anesthetic solution (p < 0.001) together with a similar anesthetic quality (p = 0.082) compared to IANB. Concerning pain during extraction (p = 0.211), frequency of second injection (p = 0.197), and incidence of dry socket (p = 0.178), no significant differences were detected. CONCLUSION: ILA fulfills the requirements of a minimal invasive and patient-friendly local anesthetic technique. In accordance, it represents a safe and reliable alternative to IANB for extraction of mandibular posterior teeth. CLINICAL RELEVANCE: ILA can be recommended for routine dental extractions.

Osseous response on linear and cyclic RGD-peptides immobilized on titanium surfaces in vitro and in vivo.

Biomimetic surface modifications of titanium (Ti) implants using the Arg-Gly-Asp-sequence (RGD) are promising to accelerate bone healing in cases of medical implants. Therefore, we compared the impact of linear and cyclic RGD (l- and c-RGD) covalently coupled onto Ti surfaces on the osseous response in vitro and in vivo. In vitro, osteoblasts' behavior on different surfaces (unmodified, amino-silanized [APTES], l- and c-RGD) was analysed regarding adhesion (fluorescence microscopy), proliferation (resazurin stain) and differentiation (reverse transcription polymerase chain reaction on alkaline phosphatase and osteocalcin). In vivo, osteosynthesis screws (unmodified n = 8, l-RGD n = 8, c-RGD n = 8) were inserted into the proximal tibiae of 12 rabbits and evaluated for bone growth parameters (bone implant contact [%] and vertical bone apposition [VBA;%]) at 3 and 6 weeks. In vitro, c- as well as l-RGD surfaces stimulated osteoblasts' adherence, proliferation and differentiation in a similar manner, with only subtle evidence of superiority of the c-RGD modifications. In vivo, c-RGD-modifications led to a significantly increased VBA after 3 and 6 weeks. Thus, coating with c-RGD appears to play an important role influencing osteoblasts' behaviour in vitro but especially in vivo. These findings can be applied prospectively to implantable biomaterials with hypothetically improved survival and success rates. © 2017 Wiley Periodicals Inc. J Biomed Mater Res Part A: 106A: 419-427, 2018.

Influence of needle bevel design on injection pain and needle deformation in dental local infiltration anaesthesia - randomized clinical trial.

The aims of this in vivo study were to evaluate the impact of needle bevel design on patients' pain perception and the mechanical deformation of the needle tip after the injection. In a prospective single-blinded trial, 150 patients received conventional infiltration anaesthesia for dental treatment by one examiner. Patients were randomized for one out of three different needle bevel types (scalpel-designed bevel needle (SB), n=50; triple bevel needle (TB), n=50; regular bevel needle (RB), n=50). Subjects' self-reported injection pain perception was evaluated using a numeric rating scale (NRS). For each needle tip, deformations after single use were measured using SEM. A significant lower injection pain level was found in SB (mean 2.1±1.2) than in TB (mean 3.5±1.6;) and RB (mean 3.4±1.0; all P<0.001). A needle deformation was detected in about 97.3% of all needles (SB 50/50, TB 50/50, and RB: 46/50). A higher number of barbs were found in SB (29/50) versus TB (17/50) and RB (19/50). For dental local infiltration anaesthesia, injection needles with a scalpel-designed bevel demonstrated significantly less injection pain. Needle tip deflections after anaesthetic agent infiltration, especially barbed hooks on the non-cutting edge may result in greater soft tissue trauma.

Cellular fluid shear stress on implant surfaces-establishment of a novel experimental set up.

BACKGROUND: Mechanostimuli of different cells can affect a wide array of cellular and inter-cellular biological processes responsible for dental implant healing. The purpose of this in vitro study was to establish a new test model to create a reproducible flow-induced fluid shear stress (FSS) of osteoblast cells on implant surfaces. METHODS: As FSS effects on osteoblasts are detectable at 10 dyn/cm2, a custom-made flow chamber was created. Computer-aided verification of circulation processes was performed. In order to verify FSS effects, cells were analysed via light and fluorescence microscopy. RESULTS: Utilising computer-aided simulations, the underside of the upper plate was considered to have optimal conditions for cell culturing. At this site, a flow-induced orientation of osteoblast cell clusters and an altered cell morphology with cellular elongation and alteration of actin fibres in the fluid flow direction was detected. CONCLUSIONS: FSS simulation using this novel flow chamber might mimic the peri-implant situation in the phase of loaded implant healing. With this FSS flow chamber, osteoblast cells' sensitivity to FSS was verified in the form of morphological changes and cell re-clustering towards the direction of the flow. Different shear forces can be created simultaneously in a single experiment.

Impact of maxillary sinus augmentation on oral health-related quality of life.

BACKGROUND: The aim of this study was to measure the oral health-related quality of life (OHRQoL) after maxillary sinus augmentation to determine the physical and psychological impact of this procedure for the patient. METHODS: Three hundred sixteen patients treated with an external or internal maxillary sinus augmentation and a total of 863 implants in the Department of Oral and Maxillofacial Surgery, Johannes Gutenberg University, Mainz, Germany, between July 2002 and December 2007 were included in this retrospective study. Total implant survival was assessed. Completion of a modified 26-item version of the Oral Health Impact Profile (OHIP-G) for assessing the oral health-related quality of life before and after the treatment was asked for. Subcategories were (1) functional limitations, (2) physical and psychological disabilities, and (3) complaints due to the surgical procedure. In 53 patients available for clinical follow-up examination, assessment of soft tissue parameters was performed. RESULTS: After an average time in situ of 41.2 ± 27 months (3.4 years), the in situ rate was 95.4%. One-year survival rate and five-year survival rate according to Kaplan Meier were 95.4 and 94.4%. Concerning functional limitations, significant better values for OHRQoL after sinus augmentation procedure than before the treatment (p < 0.001) were seen. In the subcategory physical and psychological disabilities, all questions had significant better values after the sinus lift (p < 0.001). Concerning complaints due to the surgical procedure, mean total scores were 5.1 ± 5.4 pre-operative, 6.9 ± 6.1 (0-31) post-operative, and 2.4 ± 3.7 recently. This meant a significant difference between "pre-operative" vs. "post-operative" (p = 0.003), "pre-operative" vs. "recently" (p < 0.001), and "post-operative" vs. "recently" (p < 0.001). Concerning the influence of implant indication, edentulous patients showed the most distinct improvement after the procedure. Clinical assessment showed stable soft tissue parameters. CONCLUSIONS: Evaluation of OHRQoL after sinus augmentation showed a significant improvement indicating a remarkable benefit for the patients through this procedure.

Movement control during aspiration with different injection systems via video monitoring-an in vitro model.

OBJECTIVES: The aim of the present study was an evaluation of movement during double aspiration by different manual syringes and one computer-controlled local anesthesia delivery system (C-CLAD). MATERIALS AND METHODS: With five different devices (two disposable syringes (2, 5 ml), two aspirating syringes (active, passive), one C-CLAD), simulation of double aspiration in a phantom model was conducted. Two experienced and two inexperienced test persons carried out double aspiration with the injection systems at the right and left phantom mandibles in three different inclination angles (n = 24 × 5 × 2 for each system). 3D divergences of the needle between aspiration procedures (mm) were measured with two video cameras. RESULTS: An average movement for the 2-ml disposal syringe of 2.85 mm (SD 1.63), for the 5 ml syringe of 2.36 mm (SD 0.86), for the active-aspirating syringe of 2.45 mm (SD 0.9), for the passive-aspirating syringe of 2.01 mm (SD 0.7), and for the C-CLAD, an average movement of 0.91 mm (SD 0.63) was seen. The movement was significantly less for the C-CLAD compared to the other systems (p < 0.001). The movement of the needle in the soft tissue was significantly less for the C-CLAD compared to the other systems (p < 0.001). CONCLUSIONS: A difference in involuntary movement of the syringe could be seen in comparison between manual and C-CLAD systems. Launching the aspiration by a foot pedal in computer-assisted anesthesia leads to a minor movement. CLINICAL RELEVANCE: To solve the problem of movement during aspiration with possibly increased false-negative results, a C-CLAD seems to be favorable.

Comparison of anesthetic efficacy of 2 and 4 % articaine in inferior alveolar nerve block for tooth extraction-a double-blinded randomized clinical trial.

OBJECTIVES: The purpose of this clinical prospective, randomized, double-blind trial was to compare the anesthetic efficacy of 2 % articaine and 4 % articaine in inferior alveolar nerve block anesthesia for extraction of mandibular teeth. MATERIALS AND METHODS: In 95 patients, 105 lower molar and premolar teeth were extracted after intraoral inferior alveolar nerve block. In 53 cases, 2 % articaine (group I) and, in 52 cases, 4 % articaine (group II) was administered. The primary objective was to analyze the differences of anesthetic effects between the two groups (complete/sufficient vs. insufficient/none). Furthermore, differences in pulpal anesthesia (onset and depth, examined with pulp vitality tester (min)), as well as in length of soft tissue anesthesia (min), were evaluated. Additionally, the need of a second injection, pain while injecting (numeric rating scale (NRS)), pain during treatment (NRS), pain after treatment (NRS), and other possible complications (excessive pain, bleeding events, prolonged deafness) were analyzed. RESULTS: Anesthesia was sufficient for dental extractions in both groups without significant differences (p = 0.201). The onset of anesthesia did not differ significantly (p = 0.297). A significantly shorter duration of soft tissue anesthesia was seen in group I (2.9 vs. 4 h; p < 0.001). There was no significant difference in the need for a second injection (p = 0.359), in injection pain (p = 0.386), as well as in pain during (p = 0.287) or after treatment (p = 0.121). In both groups, no complications were seen. CONCLUSIONS: The local anesthetic effect of the 4 % articaine solution is not significantly better when compared to 2 % articaine. CLINICAL RELEVANCE: For mandibular tooth extraction, articaine 2 % may be used as alternative as well.

Osseous plasma cell neoplasm of the mandible for initial diagnosis of multiple myeloma: case report and literature review.

PURPOSE: Plasmocytoma of the bone represents a variance of plasma cell neoplasms, which often gives hint for systemic affection. A case of a mandibular tumor as first manifestation of multiple myeloma (MM) is presented and discussed with the literature. MATERIALS AND METHODS: A 76-year old female with pain and swelling of the right lower jaw was assigned to the hospital. Radiograph showed a lytic tumor at the mandibular condyle and histological analysis gave evidence of a plasma cell tumor with positivity to CD138. In further examinations, elevated immunoglobulin levels in serum and osseous plasma cell infiltration unveiled MM. PubMed-database was searched by "multiple myeloma primary lesion jaw", "multiple myeloma primary manifestation mandible" and "multiple myeloma mandibular lesion" within the last 30 years. RESULTS: Together with the current case, 11 reports including 13 patients were found describing mandibular plasmocytoma as first sign for MM. Mean age was 59 years with slight female preference. Initial symptoms were mostly swelling episodes with or without pain. The main radiological presentation was a uni- or multilocular radiolucency. After a mean follow up time of 29 months (stated in 8 cases; standard deviation 50, min: 1, max: 151), 3/8 patients died and in 5/8 cases, signs of progress were seen. CONCLUSION: In rare cases, occurrence of plasmocytoma of the mandible is first sign for MM and should always lead to further investigations regarding systemic disease. Simple examinations such as panoramic X-rays can lead to early detection of MM and thereby better prognosis by earlier treatment.