Dual-wavelength synchronously mode-locked Cr:LiSAF laser with a tunable beating frequency and a central wavelength.

We demonstrate a versatile dual-wavelength synchronous mode-locking of a diode-pumped Cr:LiSAF laser for the first time, to our knowledge. A two-color mode-locked operation is achieved by using intracavity birefringent filters (BRFs) or etalons as frequency-selective elements. Using filters with different thicknesses and hence different free spectral ranges (FSRs), wavelength separation in two-color mode-locking could be selected between 1 and 9 nm, with corresponding beating frequencies in the 0.4-3.5 THz range. Moreover, the central wavelength of the two-color output could be tuned smoothly between 840 and 875 nm, only limited by the bandwidth of the semiconductor saturable absorber mirror (SESAM) used for mode-locking. The method, which enables easy adjustment of the central wavelength and beating frequency of a dual-wavelength operation, is suitable for use in other laser gain media as well.

Diode-pumped passively mode-locked femtosecond Yb:YLF laser at 1.1†GHz.

We report femtosecond pulse generation at GHz repetition rates with the Yb:YLF gain medium for the first time. A simple, low-cost, and compact architecture is implemented for the potential usage of the system as a low-noise timing jitter source. The system is pumped by 250 mW, 960 nm single-mode diodes from both sides. The semiconductor saturable absorber mirror (SESAM) mode-locked laser is self-starting and generates transform-limited 210 fs long pulses near 1050 nm. The laser's average output power is 40 mW, corresponding to a pulse energy of 36 pJ at 1.1 GHz repetition rate. The measured laser relative intensity noise (RIN) from 1 Hz to 1 MHz is 0.42%. The performance obtained in this initial work is limited by the specifications of the available optics and could be improved significantly by employing custom-designed optical elements.

Octave-spanning supercontinuum generation in a CMOS-compatible thin Si3N4 waveguide coated with highly nonlinear TeO2.

Supercontinuum generation (SCG) is an important nonlinear optical process enabling broadband light sources for many applications, for which silicon nitride (Si3N4) has emerged as a leading on-chip platform. To achieve suitable group velocity dispersion and high confinement for broadband SCG the Si3N4 waveguide layer used is typically thick (>∼700 nm), which can lead to high stress and cracks unless specialized processing steps are used. Here, we report on efficient octave-spanning SCG in a thinner moderate-confinement 400-nm Si3N4 platform using a highly nonlinear tellurium oxide (TeO2) coating. An octave supercontinuum spanning from 0.89 to 2.11 µm is achieved at a low peak power of 258 W using a 100-fs laser centered at 1565 nm. Our numerical simulations agree well with the experimental results giving a nonlinear parameter of 2.5 ± 0.5 W-1m-1, an increase by a factor of 2.5, when coating the Si3N4 waveguide with a TeO2 film. This work demonstrates highly efficient SCG via effective dispersion engineering and an enhanced nonlinearity in CMOS-compatible hybrid TeO2-Si3N4 waveguides and a promising route to monolithically integrated nonlinear, linear, and active functionalities on a single silicon photonic chip.

Fiber-interferometric second harmonic generator with dual-color standard quantum-limited noise performance.

We present a novel fiber-interferometric device that achieves dual functionality: simultaneous amplification of the pulsed input signal and generation of its second harmonic while effectively suppressing the intensity noise in both modes, reaching the standard quantum-limit. The underlaying mechanism is based on phase-biased nonlinear polarization rotation coupled with type-I phase-matched second harmonic generation, a concept that is both theoretically investigated and experimentally verified. In the experiment, a fiber-optic system is constructed capable of generating 42 MHz ultra-low noise sub-150 fs output pulse trains simultaneously at 1030 nm and 515 nm, with average powers of 165 mW and 50 mW, respectively. Systematic frequency-resolved intensity noise measurements confirm dual wavelength, quantum-limited noise suppression beyond 100 kHz offset-frequency, with suppression levels up to 14 dB, showing correlation with local maxima in average power in both fundamental and second harmonic mode.

Performance enhancement via XPM suppression of a linear all-PM mode-locked fiber oscillator.

We demonstrate the strong performance enhancement of an all-polarization-maintaining mode-locked fiber oscillator using a linear self-stabilized fiber interferometer via the suppression of the cross-phase modulation (XPM). Numerical simulations reveal that XPM significantly affects the saturable absorber dynamics resulting in strong distortions of the mode-locked steady-states and output pulse quality. For experimental verification, we construct an oscillator with XPM suppression, employing an intra-cavity YVO4 crystal to obtain a differential walk-off effect and compare its characteristics with a reference oscillator in a standard configuration. It is shown, that the XPM suppression not only lowers the mode-locking threshold by more than 45% but further results in improved pulse quality at the output ports and reduced nonlinear loss in the artificial saturable absorber.

Photonically referenced extremely stable oscillator.

Due to their low phase noise at high carrier frequencies, photonic microwave oscillators are continuously expanding their application areas including digital signal processing, telecommunications, radio astronomy, and RADAR and LIDAR systems. Currently, the lowest noise photonic oscillators rely on traditional optical frequency combs with multiple stabilization loops that incorporate large vacuum components and complex optoelectronic configurations. Hence, the resulting systems are not only challenging to operate but also expensive to maintain. Here, we introduce a significantly simpler solution: a Photonically Referenced Extremely STable Oscillator (PRESTO). PRESTO requires only three key components: a femtosecond laser, a fiber delay element, and a pulse timing detector. The generated microwave at 10 GHz has phase noise levels of -125, -145, and <-160 dBc/Hz at 1, 10, and >100 kHz, respectively, with an integrated timing jitter of only 2 fs root mean square (RMS) over [100 Hz-1 MHz]. This approach offers a reliable solution for simplifying and downsizing photonic oscillators while delivering high performance.

Accurate simulation of THz generation with finite-element time domain methods.

We investigate the accurate full broadband simulation of complex nonlinear optical processes. A mathematical model and numerical simulation techniques in the time domain are developed to simulate complex nonlinear optical processes without the usual used slowly varying envelope approximation. We illustrate the accuracy by numerical simulations. Furthermore, they are used to elucidate THz generation in periodically poled Lithium Niobate (PPLN) including optical harmonic generation.

Demonstration of an imaging-free terahertz generation setup using segmented tilted-pulse-front excitation.

A novel, to the best of our knowledge, compact, imaging-free, tilted-pulse-front (TPF) pumped terahertz (THz) source based on a LiNbO3 slab with a small wedge angle (< 8°) and with an echelon microstructure on its input surface has been demonstrated. Single-cycle pulses of more than 40-µJ energy and 0.28-THz central frequency have been generated by 100-mJ, 400-fs pump pulses with 4.1 × 10-4 efficiency and excellent focusability. The peak electric field value focused by a single parabolic mirror was 540 kV/cm. Using 200-fs-long pump pulses, the efficiency increased to 1.0 × 10-3, which is in qualitative agreement with the measured increased diffraction efficiency in the velocity matched diffraction order. A further ∼8x increase in efficiency is expected by pumping a cryogenically cooled wedged echelon with appropriate step sizes, better microstructured surface quality, and antireflection coating on both the input and the output sides. THz generation efficiency maxima were found at ∼2.7-mm crystal thickness for both pump pulse durations. The focused THz beam was diffraction limited within 5% accuracy. Compared to conventional THz sources, this setup is very compact, easy to align, can be pumped by larger beam sizes maintaining the high THz generation efficiency, and produces THz pulses with superior focusability.

Free-electron laser temporal diagnostic beamline FL21 at FLASH.

A beamline for temporal diagnostics of extreme ultraviolet (XUV) femtosecond pulses at the free-electron laser in Hamburg (FLASH) at DESY was designed, built and put into operation. The intense ultra-short XUV pulses of FLASH fluctuate from pulse to pulse due to the underlying FEL operating principle and demand single-shot diagnostics. To cope with this, the new beamline is equipped with a terahertz field-driven streaking setup that enables the determination of single pulse duration and arrival time. The parameters of the beamline and the diagnostic setup as well as some first experimental results will be presented. In addition, concepts for parasitic operation are investigated.

100-mJ, 100-W cryogenically cooled Yb:YLF laser.

We present a diode-pumped Yb:YLF laser system generating 100-mJ sub-ps pulses at a 1-kHz repetition rate (100 W average power) by chirped-pulse amplification. The laser consists of a cryogenically cooled 78 K, regenerative, eight-pass booster amplifier seeded by an all-fiber front end. The output pulses are compressed to 980 fs in a single-grating Treacy compressor with a throughput of 89%. The laser will be applied to multi-cycle THz generation and pumping of high average power parametric amplifiers.

Large-mode-area soliton fiber oscillator mode-locked using NPE in an all-PM self-stabilized interferometer.

In this work, we investigate an approach to scale up the output pulse energy in an all-polarization-maintaining 17.3 MHz Yb-doped fiber oscillator via implementation of a 25 µm core-diameter large-mode-area fiber. The artificial saturable absorber is based on a Kerr-type linear self-stabilized fiber interferometer, enabling non-linear polarization rotation in polarization-maintaining fibers. Highly stable mode-locked steady states in the soliton-like operation regime are demonstrated with 170 mW average output power and a total output pulse energy of ∼10n J distributed between two output ports. An experimental parameter comparison with a reference oscillator constructed with 5.5 µm core-sized standard fiber components reveals an increase of pulse energy by a factor of 36 with simultaneously reduced intensity noise in the high-frequency range >100k H z.

Passively CEP stable sub-2-cycle source in the mid-infrared by adiabatic difference frequency generation.

We report on the generation of a passive carrier-envelope phase (CEP) stable 1.7-cycle pulse in the mid-infrared by adiabatic difference frequency generation. With sole material-based compression, we achieve a sub-2-cycle 16-fs pulse at a center wavelength of 2.7 µm and measured a CEP stability of <190 mrad root mean square. The CEP stabilization performance of an adiabatic downconversion process is characterized for the first time, to the best of our knowledge.

Parametric waveform synthesis: a scalable approach to generate sub-cycle optical transients.

The availability of electromagnetic pulses with controllable field waveform and extremely short duration, even below a single optical cycle, is imperative to fully harness strong-field processes and to gain insight into ultrafast light-driven mechanisms occurring in the attosecond time-domain. The recently demonstrated parametric waveform synthesis (PWS) introduces an energy-, power- and spectrum-scalable method to generate non-sinusoidal sub-cycle optical waveforms by coherently combining different phase-stable pulses attained via optical parametric amplifiers. Significant technological developments have been made to overcome the stability issues related to PWS and to obtain an effective and reliable waveform control system. Here we present the main ingredients enabling PWS technology. The design choices concerning the optical, mechanical and electronic setups are justified by analytical/numerical modeling and benchmarked by experimental observations. In its present incarnation, PWS technology enables the generation of field-controllable mJ-level few-femtosecond pulses spanning the visible to infrared range.

High-power, high-repetition-rate tunable longwave mid-IR sources based on DFG in the OPA regime.

We demonstrate high-power longwave mid-IR ultrafast sources based on a high-power Er-fiber laser system at 1.55 µm with a 32-MHz repetition rate. Compared with previous 1.03-µm-driven difference frequency generation (DFG), our current configuration allows tighter focusing in the GaSe crystal thanks to an increased damage threshold at 1.55 µm. Consequently, the 1.55-µm-driven DFG can operate in the regime of optical parametric amplification (OPA), in which the mid-IR power grows exponentially with respect to the square root of the pumping power. We experimentally demonstrate this operation regime and achieve broadband mid-IR pulses that are tunable in the 7.7-17.3 µm range with a maximum average power of 58.3 mW, which is also confirmed by our numerical simulation.

Continuous-wave Tm:YLF laser with ultrabroad tuning (1772-2145 nm).

We report detailed experimental data aiming for rigorous investigation of Tm:YLF laser performance, especially with a focus on tuning behavior. Continuous-wave (cw) lasing performance of Tm:YLF crystals with thulium dopings in the 2-6% range is investigated under diode and Ti:Sapphire pumping at 792 nm and 780 nm, respectively. While employing the c-axis, we have achieved cw lasing thresholds below 20 mW, laser output power up to 1.42 W, and laser slope efficiencies as high as 70% with respect to absorbed pump power. The passive loss of the Tm:YLF crystal is estimated to be as low as 0.05% per cm, corresponding to a crystal figure of merit above 10000. Via employing this low-loss crystal and a 2-mm thick off-surface optical axis birefringent filter (BRF) with strong sideband rejection, a record cw tuning range covering the 1772-2145 nm interval is demonstrated (except a small gap between 1801-1815nm region). Detailed lifetime and emission cross section measurements have been performed to explain the observed performance, and strategies for further performance enhancement are discussed.

Parameter sensitivities in tilted-pulse-front based terahertz setups and their implications for high-energy terahertz source design and optimization.

Despite the popularity and ubiquity of the tilted-pulse-front technique for single-cycle terahertz (THz) pulse generation, there is a deficit of experimental studies comprehensively mapping out the dependence of the performance on key setup parameters. The most critical parameters include the pulse-front tilt, the effective length of the pump pulse propagation within the crystal as well as effective length over which the THz beam interacts with the pump before it spatially walks off. Therefore, we investigate the impact of these parameters on the conversion efficiency and the shape of the THz beam via systematically scanning the 5D parameter space spanned by pump fluence, pulse-front-tilt, crystal-position (2D), and the pump size experimentally. We verify predictions so far only made by theory regarding the optimum interaction lengths and map out the impact of cascading on the THz radiation generation process. Furthermore, distortions imposed on the spatial THz beam profile for larger than optimum interaction lengths are observed. Finally, we identify the most sensitive parameters and, based on our findings, propose a robust optimization strategy for tilted-pulse-front THz setups. These findings are relevant for all THz strong-field applications in high demand of robust high-energy table-top single-cycle THz sources such as THz plasmonics, high-harmonic generation in solids as well as novel particle accelerators and beam manipulators.

Broadly tunable (993-1110 nm) Yb:YLF laser.

We have investigated room-temperature continuous-wave (cw) lasing performance of Yb:YLF oscillators in detail using rod-type crystals with low Yb-doping (2%). The laser is pumped by a low-cost, high brightness, 10 W, 960 nm single-emitter multimode diode. Laser performance is acquired in both E//a and E//c configurations, using 12 different output couplers with transmission ranging from 0.015% to 70%. We have estimated the passive loss of the Yb:YLF crystal as 0.06% per cm, corresponding to an impressive crystal figure of merit above 4000. The low-doping level not only reduces the system losses but also minimizes the thermal load as the low doped crystals enable distribution of heat load in a greater volume. Using the advantages of lower loss and improved thermal behavior, we have achieved cw output power above 4 W, cw slope efficiencies up to 78%, and a record cw tuning range covering the 993-1110 nm region (117 nm). The output power performance achieved in this initial work is limited by the available pump power, and future room-temperature Yb:YLF systems have the potential to produce higher output power levels.

Nonlinear Mach-Zehnder interferometer isolator.

Isolators are important devices in optics, especially for low noise systems, as even a small amount of back reflection can be detrimental to the quality of the signal generated by the source impacting downstream applications. Traditionally, magneto-optical materials have been used in isolators for bulk and fiber based optical systems. However, they tend to have high insertion loss, and are complicated to integrate on a photonics chip. Another class of isolators is based on optical nonlinearity that do not require external magnetic bias. However, the devices demonstrated so far suffer from either limited bandwidth, high insertion loss or fabrication complexity. In this work, we demonstrate a monolithic, fully complementary metal-oxide-semiconductor compatible, nonlinear Mach-Zehnder interferometer isolator based on third order optical nonlinearity, that overcomes such issues. In this proof of principle study, we show up to 15 dB isolation with 0.4 dB insertion loss and a device footprint of 0.4 mm2 which can easily be improved on further. The device is broadband and is independent of wavelength, material, and the platform. Not only can such a device be used for integrated optical systems but also for the fibre based optical systems.

Semiconductor saturable absorber mirror mode-locked Yb:YLF laser with pulses of 40 fs.

We have generated pulses as short as 40 fs with an average power of 265 mW from a semiconductor saturable absorber mirror (SESAM) mode-locked Yb:YLF oscillator employing a 1% transmitting output coupler (OC). The room-temperature laser is pumped by a low-cost 960 nm single-emitter multimode diode and dispersion compensation is provided via double chirped mirrors (DCMs). The 40-fs pulses are centered around 1050 nm with a width of 34 nm at a repetition rate of 87.3 MHz. By increasing the output coupling to 5% and by using Gires-Tournois interferometer (GTI) mirrors for dispersion compensation, we have also demonstrated 380-fs pulses with 1.85 W of average power around 1025 nm at a repetition rate of 190.4 MHz. Using an intracavity off-surface optic axis birefringent filter, the central wavelength of the pulses could be tuned in the 1020-1025 nm and 1019-1047 nm ranges for the 5% and 1% transmitting OCs, respectively. To the best of our knowledge, these are the shortest pulses and highest average and peak powers generated from room-temperature Yb:YLF lasers to date.

Broadly tunable two-color lasing of Cr:LiCAF with on-surface and off-surface optical axis birefringent filters: performance comparison.

We studied the two-color lasing performance of a Cr:LiCAF laser using crystal quartz on-surface and off-surface optical axis birefringent filters (BRFs). Four different on-surface optical axis BRFs with thicknesses of 2 mm, 4 mm, 8 mm, and 16 mm, and three different off-surface optical axis BRFs with a diving angle of 25° and thicknesses of 2 mm, 4 mm, and 8 mm have been tested. Two-color lasing operation could be achieved in tens of different pairs of wavelengths using both types of BRFs. Regular on-surface optical axis BRFs provided two-color lasing in the 772-810 nm interval, with a discretely tunable wavelength separation of 1 to 37 nm (0.5 to 17 THz). In comparison, the off-surface optical axis BRFs enabled scanning of two-color lasing spectra in a much broader wavelength range between 745 nm and 850 nm with a discretely tunable wavelength separation of 0.8 to 99 nm (0.4 to 46 THz). The results clearly demonstrate the advantages of using off-surface optical axis BRFs to achieve two-color lasing with broadly tunable wavelength separation.