RESUMEN
Composite materials made from aluminum foam are increasingly used in aerospace and automotive industries due to their low density, high energy absorption capacity, and corrosion resistance. Additive manufacturing processes offer several advantages over conventional manufacturing methods, such as the ability to produce significantly more geometrically complex components without the need for expensive tooling. Direct Energy Deposition processes like Wire Arc Additive Manufacturing (WAAM) enable the additive production of near-net-shape components at high build rates. This paper presents a technology for producing aluminum foam structures using WAAM. This paper's focus is on the development of welding wires that are mixed with a foaming agent (TiH2) and produce a foamed weld metal as well as their processing using MIG welding technology.
RESUMEN
The chemical properties of poly- and perfluoroalkyl substances (PFASs) make them widespread for use in a number of industrial and commercial products to confer water and oil-repellency characteristics and to reduce surface tension e.g. in aqueous film-forming foams (AFFFs). Some PFASs, especially perfluoroctane sulfonate, and several perfluoroalkyl carboxylic acids, are known to cause significant human and environmental negative impact. Our knowledge on the content of PFASs in products remains scarce due to limited information available, thus impeding any precise assessment of human exposure and environmental release upon use. This study aimed at analyzing a wide variety of liquid products (n = 194) likely to contain PFASs, including impregnating agents, lubricants, cleansers, polishes, AFFFs and other industrial products. By means of LC- and GC-MS/MS analytical techniques, 24 PFASs (from 41 targeted PFASs) were detected and quantified in 55% of samples. PFAS quantification and profiling was found to be consumer product specific. PFASs were mostly detected in AFFF (90%) and impregnating agents (60%) with mainly ionic and neutral species, respectively. In particular, the fluorotelomer alcohols 6:2, 8:2 and 10:2 FTOHs were detected in 40-50% of impregnating agents. Further investigation by Fast Atom Bombardment Mass Spectrometry (FAB-MS) on a set of AFFF samples allowed the characterization of 8 different PFAS classes as major components in these formulations. Results demonstrated that numerous and diversified PFAS are currently used in specific commercial products, implying significant human exposure and environmental release that necessitate further research concerning their toxicological impact.
Asunto(s)
Ácidos Alcanesulfónicos/análisis , Ácidos Carboxílicos/análisis , Fluorocarburos/análisis , Cromatografía Liquida , Cromatografía de Gases y Espectrometría de Masas , Productos Domésticos/análisis , Lubricantes/análisis , Espectrometría de Masas en TándemRESUMEN
Hexabromocyclododecane (HBCDD) is a brominated flame retardant (BFR) and major additive to polystyrene foam thermal insulation that has recently been listed as a persistent organic pollutant by the Stockholm Convention. During a 2013/2014 field analytical survey, we measured HBCDD content ranging from 0.2 to 2.4% by weight in 98 polystyrene samples. Liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) analyses indicated that expandable (EPS) and extruded (XPS) polystyrene foams significantly differed in the α/γ HBCDD isomer ratio, with a majority of α and γ isomers in XPS and EPS, respectively. Interestingly, this technique indicated that some recent materials did not contain HBCDD, but demonstrated bromine content when analysed with X-ray fluorescence (XRF). Further investigation by Nuclear Magnetic Resonance (NMR) was able to discriminate between the BFRs present. In addition to confirming the absence or presence of HBCDD in polystyrene samples, high-field NMR spectroscopy provided evidence of the use of brominated butadiene styrene (BBS) as copolymer in the production of polystyrene. Use of this alternative flame retardant is expected to cause fewer health and environmental concerns. Our results highlight a trend towards the use of copolymerized BFRs as an alternative to HBCDD in polystyrene foam boards. In addition to providing a rapid NMR method to identify polymeric BFR, our analytical approach is a simple method to discriminate between flame-retardants in polystyrene foam insulating materials.
Asunto(s)
Monitoreo del Ambiente/métodos , Contaminantes Ambientales/análisis , Retardadores de Llama/análisis , Hidrocarburos Bromados/análisis , Espectroscopía de Resonancia Magnética/métodos , Poliestirenos/análisis , Cromatografía Liquida , Espectrometría por Rayos X , Espectrometría de Masas en TándemRESUMEN
Field-portable X-ray fluorescence (FP-XRF) instruments are important for non-destructive, rapid and convenient measurements of lead in paint, in view of potential remediation. Using real-life paint samples, we compared measurements from three FP-XRF instruments currently used in Switzerland with laboratory measurements using inductively coupled plasma mass spectrometry after complete sample dissolution. Two FP-XRF devices that functioned by lead L shell excitation frequently underestimated the lead concentration of samples. Lack of accuracy correlated with lead depth and/or the presence of additional metal elements (Zn, Ba or Ti). A radioactive source emitter XRF that enabled the additional K shell excitation showed higher accuracy and precision, regardless of the depth of the lead layer in the sample or the presence of other elements. Inspection of samples by light and electron microscopy revealed the diversity of real-life samples, with multi-layered paints showing various depths of lead and other metals. We conclude that the most accurate measurements of lead in paint are currently obtained with instruments that provide at least sufficient energy for lead K shell excitation.
Asunto(s)
Monitoreo del Ambiente/métodos , Contaminantes Ambientales/análisis , Plomo/análisis , Pintura/análisis , Espectrometría por Rayos X , Diseño de Equipo , Sensibilidad y Especificidad , SuizaRESUMEN
The potent aroma compound rose oxide was quantified in several white wines by a headspace solid-phase microextration stable isotope dilution assay (HS-SPME-SIDA) and the enantiomeric ratios of the cis diastereomers were determined by enantioselective capillary GC. The most odor-active stereoisomer (23)-cis-rose oxide was detectable in all investigated white wines ranging from 0.2 to 12 microg/L. However, its contribution to the overall aroma in some white wine varieties can be neglected as indicated by a low odor activity value (OAV). The highest concentrations were found in Gewürztraminer wines, confirming the importance of rose oxide as a varietal aroma compound in this variety. Surprisingly, the enantiomeric ratio of cis-rose oxide in all investigated wines was substantially lower than in nonfermented musts and in some wines almost racemic cis-rose oxide was detected. Fermentation studies with a model must that contained deuterated water revealed that yeast is capable of reducing the precursor 3,7-dimethyl octa-2,5-dien-1,7-diol (geranyl diol I) yielding 3,7-dimethyl-5-octen-1,7-diol (citronellyl diol I) that gives rise to cis- and trans-rose oxide after acid catalyzed cylization. The deuterium labeling pattern of the resulting rose oxide stereoisomers and a clearly detectable kinetic isotope effect indicate that at least two different reductive pathways in yeast exist that yield cis-rose oxide with different enantiomeric ratios altering the genuine enantiomeric ratio in grape musts. The presence of (+)-cis-rose oxides in wines can therefore be attributed to the reductive yeast metabolism during fermentation. This observation corroborates recent findings that the modification of terpene derived varietal aroma is an integral part of yeast metabolism and not only a simple hydrolytical process.