Model of the light sword intraocular lens: in-vitro comparative studies.

This work presents the first models of light sword intraocular lenses (LS IOLs) with angularly modulated optical power. We performed an experimental, comparative study with multifocal and extended depth of focus intraocular lenses, which are available on the market. The measurements conducted in an original optical bench were utilised for an analysis of point spread functions, elongated foci, modulation transfer functions and the areas defined by them. The LS IOL models perform homogeneous imaging in the whole range of designed defocus. The proposed concept of extended depth of focus seems to be promising for the development of presbyopia-correcting intraocular lenses capable of regaining fully functional vision.

The Light Sword Lens - A novel method of presbyopia compensation: Pilot clinical study.

PURPOSE: Clinical assessment of a new optical element for presbyopia correction-the Light Sword Lens. METHODS: Healthy dominant eyes of 34 presbyopes were examined for visual performance in 3 trials: reference (with lens for distance correction); stenopeic (distance correction with a pinhole ϕ = 1.25 mm) and Light Sword Lens (distance correction with a Light Sword Lens). In each trial, visual acuity was assessed in 7 tasks for defocus from 0.2D to 3.0D while contrast sensitivity in 2 tasks for defocus 0.3D and 2.5D. The Early Treatment Diabetic Retinopathy Study protocol and Pelli-Robson method were applied. Within visual acuity and contrast sensitivity results degree of homogeneity through defocus was determined. Reference and stenopeic trials were compared to Light Sword Lens results. Friedman analysis of variance, Nemenyi post-hoc, Wilcoxon tests were used, p-value < 0.05 was considered significant. RESULTS: In Light Sword Lens trial visual acuity was stable in tested defocus range [20/25-20/32], Stenopeic trial exhibited a limited range of degradation [20/25-20/40]. Light Sword Lens and reference trials contrast sensitivity was high [1.9-2.0 logCS] for both defocus cases, but low in stenopeic condition [1.5-1.7 logCS]. Between-trials comparisons of visual acuity results showed significant differences only for Light Sword Lens versus reference trials and in contrast sensitivity only for Light Sword Lens versus stenopeic trials. CONCLUSIONS: Visual acuity achieved with Light Sword Lens correction in presbyopic eye is comparable to stenopeic but exhibits none significant loss in contrast sensitivity. Such correction method seems to be very promising for novel contact lenses and intraocular lenses design.

Assessment of imaging with extended depth-of-field by means of the light sword lens in terms of visual acuity scale.

We present outcomes of an imaging experiment using the refractive light sword lens (LSL) as a contact lens in an optical system that serves as a simplified model of the presbyopic eye. The results show that the LSL produces significant improvements in visual acuity of the simplified presbyopic eye model over a wide range of defocus. Therefore, this element can be an interesting alternative for the multifocal contact and intraocular lenses currently used in ophthalmology. The second part of the article discusses possible modifications of the LSL profile in order to render it more suitable for fabrication and ophthalmological applications.

Evaluation of the shadow effect in terahertz kinoform gratings.

The experimental and numerical evaluation of the shadow effect in kinoform diffractive gratings for the terahertz (THz) range is given. This effect limits the diffractive efficiency of dense gratings, which are the base of the elements suited for convenient beam focusing and imaging in THz. The observed effect of redirecting most of the incident energy into stray -1st diffractive order is observed and discussed. The presented results show the great significance of the shadow effect in selected kinoform gratings and prove the utility of the used methodology of numerical simulations.

Simple holographic projection in color.

Extremely simplified image projection technique based on optical fibers and a single Spatial Light Modulator is presented. Images are formed by addressing the modulator with especially iterated Fourier holograms, precisely aligned on the projection screen using phase factors of lenses and gratings. Focusing is done electronically with no moving parts. Color operation is done by spatial side-by-side division of the area of the modulator. Experimental results are given, showing good image quality and excellent resistance to obstructions in the light path. Speckles are suppressed by micro-movements of the screen and by time-averaging of a number of holograms into the final image.

Efficient image projection by Fourier electroholography.

An improved efficient projection of color images is presented. It uses a phase spatial light modulator with three iteratively optimized Fourier holograms displayed simultaneously--each for one primary color. This spatial division instead of time division provides stable images. A pixelated structure of the modulator and fluctuations of liquid crystal molecules cause a zeroth-order peak, eliminated by additional wavelength-dependent phase factors shifting it before the image plane, where it is blocked with a matched filter. Speckles are suppressed by time integration of variable speckle patterns generated by additional randomizations of an initial phase and minor changes of the signal.