RESUMEN
Calcium phosphate (CaP) coating of zirconia and zirconia-based implants is challenging, due to their chemical instability and susceptibility to thermal and mechanical impacts. A 3 mol% yttrium-stabilized tetragonal zirconia polycrystal was subjected to femtosecond laser (FsL) irradiation to form micro- and submicron surface architectures, prior to CaP coating using pulsed laser deposition (PLD) and low-temperature solution processing. Untreated zirconia, CaP-coated zirconia, and FsL-irradiated and CaP-coated zirconia were implanted in proximal tibial metaphyses of male Japanese white rabbits for four weeks. Radiographical analysis, push-out test, alizarin red staining, and histomorphometric analysis demonstrated a much improved bone-bonding ability of FsL-irradiated and CaP-coated zirconia over CaP-coated zirconia without FsL irradiation and untreated zirconia. The failure strength of the FsL-irradiated and CaP-coated zirconia in the push-out test was 6.2-13.1-times higher than that of the CaP-coated zirconia without FsL irradiation and untreated zirconia. Moreover, the adhesion strength between the bone and FsL-irradiated and CaP-coated zirconia was as high as that inducing host bone fracture in the push-out tests. The increased bone-bonding ability was attributed to the micro-/submicron surface architectures that enhanced osteoblastic differentiation and mechanical interlocking, leading to improved osteointegration. FsL irradiation followed by CaP coating could be useful for improving the osteointegration of cement-less zirconia-based joints and zirconia dental implants.
RESUMEN
All-ceramic restorations have become increasingly popular in dentistry. Toward ensuring that these restorations adhere to the tooth structure, this study determines the optimal femtosecond laser (FL) treatment parameters for lithium disilicate glass-ceramics and highly translucent zirconia ceramics with respect to surface morphology. For both the ceramics, the following surface conditions were investigated: (1) as-sintered; (2) Al2O3 sandblasted; (3) FL treatment (dot pattern with line distances of 14, 20, and 40 µm); (4) FL treatment (crossed-line pattern with a line distance of 20 and 40 µm). Surface roughness parameters were estimated using a 3D confocal laser microscope; microstructures were analyzed using a scanning electron microscope. Peak fluence (Fpeak) values of 4 and 8 J/cm2 and irradiation numbers (N) of 20 and 10 shots were selected to create dot patterns in highly translucent zirconia and lithium disilicate glass-ceramics, respectively. Furthermore, Fpeak = 8 J/cm2 and N = 20 shots were chosen to obtain crossed-line patterns in both ceramics. Our results show that lithium disilicate glass-ceramics and highly translucent zirconia exhibit a similar surface morphology under each of the surface treatment conditions. Therefore, FL irradiation of dot or crossed-line patterns (at a distance of 20 and 40 µm) are potential candidates for future investigations.
RESUMEN
The mid-infrared range is an important spectrum range where materials exhibit a characteristic response corresponding to their molecular structure. A free-electron laser (FEL) is a promising candidate for a high-power light source with wavelength tunability to investigate the nonlinear response of materials. Although the self-amplification spontaneous emission (SASE) scheme is not usually adopted in the mid-infrared wavelength range, it may have advantages such as layout simplicity, the possibility of producing a single pulse, and scalability to a short-wavelength facility. To demonstrate the operation of a mid-infrared SASE FEL system in an energy recovery linac (ERL) layout, we constructed an SASE FEL setup in cERL, a test facility of the superconducting linac with the ERL configuration. Despite the adverse circumstance of space charge effects due to the given boundary condition of the facility, we successfully established the beam condition at the undulators and observed FEL emission at a wavelength of 20 µm. The results show that the layout of cERL has the potential for serving as a mid-infrared light source.
RESUMEN
Engineered blood vessels generally recapitulate vascular function in vitro and can be utilized in drug discovery as a novel microphysiological system. Recently, various methods to fabricate vascular models in hydrogels have been reported to study the blood vessel functions in vitro; however, in general, it is difficult to fabricate hollow structures with a designed size and structure with a tens of micrometers scale for blood vessel tissue engineering. This study reports a method to fabricate the hollow structures in photodegradable hydrogels prepared in a microfluidic device. An infrared femtosecond pulsed laser, employed to induce photodegradation via multi-photon excitation, was scanned in the hydrogel in a program-controlled manner for fabricating the designed hollow structures. The photodegradable hydrogel was prepared by a crosslinking reaction between an azide-modified gelatin solution and a dibenzocyclooctyl-terminated photocleavable tetra-arm polyethylene glycol crosslinker solution. After assessing the composition of the photodegradable hydrogel in terms of swelling and cell adhesion, the hydrogel prepared in the microfluidic device was processed by laser scanning to fabricate linear and branched hollow structures present in it. We introduced a microsphere suspension into the fabricated structure in photodegradable hydrogels, and confirmed the fabrication of perfusable hollow structures of designed patterns via the multi-photon excitation process.
RESUMEN
Cell morphology is related to proliferation and differentiation. We previously reported that cell attachment area of rat mesenchymal stem cells (MSCs) is negatively correlated with their osteogenic differentiation level on osteoconductive hydroxyapatite (HAp) with various microstructures. In this study, the correlation between the cell attachment area and osteogenic differentiation level was investigated on substrates without osteoconductive property using tissue culture polystyrene (TCPS), and 3 mol% yttria-stabilized zirconia (3Y-TZP) with or without surface periodic microstructures. It was found that the osteogenic differentiation level after 3 weeks of culture increased with a decrease in cell attachment area after 3 h of culture. The square of the correlation coefficient between cell attachment area and osteocalcin secretion content was 0.845 among the three types of substrates. Thus, the negative correlation between cell attachment area and differentiation level is confirmed even when cultured on substrates without osteoconductive property. These findings suggest that the correlation between the cell attachment area of rat MSCs and osteogenic differentiation level could also apply to various types of substrate, regardless of osteoconductive property.
Asunto(s)
Técnicas de Cultivo de Célula/métodos , Uniones Célula-Matriz/metabolismo , Durapatita/química , Células Madre Mesenquimatosas/citología , Osteocalcina/metabolismo , Osteogénesis , Fosfatasa Alcalina/genética , Fosfatasa Alcalina/metabolismo , Animales , Células Cultivadas , Células Madre Mesenquimatosas/química , Células Madre Mesenquimatosas/metabolismo , Osteogénesis/genética , Poliestirenos , Ratas , CirconioRESUMEN
Temporally and spatially resolved measurements of the number density of water droplets in an intermittent aerosol were experimentally demonstrated by a laser-induced breakdown technique. The temporal number density distribution is clearly explained by temporal variations in the air pressure at the nozzle caused by an electric valve, the number density of droplets in the steady-state aerosol as a function of air pressure applied to the nozzle, and the steady-state air flow speed as a function of the air pressure applied to the nozzle. The spatial resolutions in the radial and axial directions are also discussed; they were determined from the breakdown threshold intensities of water droplets and air.
RESUMEN
The pulse timing of a mode-locked Er-doped fiber laser was stabilized to a reference pulse train from a Cr:forsterite mode-locked laser by all-optical passive synchronization scheme. The reference pulses were injected into a ring cavity of the fiber laser by using a 1.3-1.5 mum wavelength-division multiplexer. The spectral shift induced by cross-phase modulation between copropagating two-color pulses realizes self-synchronization due to intracavity group-delay dispersion. The rms integration of timing jitter between the fiber laser pulse and the reference pulse was 3.7 fs in a Fourier frequency range from 1 Hz to 100 kHz.
RESUMEN
We demonstrate the direct generation of 12 fs pulses from a Ti:sapphire regenerative amplifier system at a 1 kHz repetition rate utilizing properly designed broadband components for chirped-pulse amplification. Optimized designs of a regenerative amplifier with a multilayer gain-narrowing compensator and an adaptive dispersion compensator with a spatial light modulator contribute to the shorter pulse amplification.
RESUMEN
An optical-phase stabilization technique was utilized to reduce the timing jitter between passively synchronized Ti:sapphire and Cr:forsterite two-color mode-locked lasers. The suppression of cavity-length fluctuation by stabilizing pulse-to-pulse slips of relative carrier-envelope phase allowed timing-jitter reduction by a factor of 1.7, resulting in an rms value of 123 attoseconds (as) in a frequency range from 10 mHz to 1 MHz.
RESUMEN
Long-term optical phase-coherent two-color femtosecond pulses were generated by use of passively timing-synchronized Ti:sapphire and Cr:forsterite lasers. The relative carrier-envelope phase relation was fixed by an active feedback loop. The accumulated phase noise from 10 mHz to 1 MHz of the locked beat note was 0.43 rad, showing tight phase locking. The optical frequency fluctuation between two femtosecond combs was submillihertz, with a 1 s averaged counter measurement over 3400 s, leading to a long-term femtosecond frequency-comb connection.
RESUMEN
We have demonstrated a reduction of the timing jitter between passively synchronized Ti:sapphire and Cr:forsterite mode-locked lasers into a 100-attosecond (as) regime by suppressing slow fluctuations with the use of active slow-bandwidth extracavity feedback. This active-passive hybrid synchronization scheme permits the achievement of timing jitters of 98 +/- 18 as at a bandwidth of 100 kHz and of 126 +/- 20 as at a bandwidth of 1 MHz for as long as 100 s.
RESUMEN
We have demonstrated a carrier-envelope phase (CEP) stabilized chirped-pulse amplification (CPA) system employing a grating-based pulse stretcher and compressor and a regenerative amplifier for the first time. In addition to stabilizing the carrier-envelope offset phase of a laser oscillator, a new pulse selection method referenced to the carrier-envelope offset beat signal was introduced. The pulse-selection method is more robust against the carrier-envelope offset phase fluctuations than a simple pulse-clock dividing method. We observed a stable fringe in a self-referencing spectrum interferometry of the amplified pulse, which implies that the CEP of amplified pulse is stabilized. We also measured the effect of the beam angle change on the CEP of amplified pulses. The result demonstrates that the CEP stabilized CPA is scalable to higher-pulse energies.
RESUMEN
We stabilized the relative carrier-envelope phase slip among the pump pulse and its subharmonic signal and idler pulses in a femtosecond optical parametric oscillator, resulting in long-term phasecoherence among the pulses. The stabilized beat signal corresponding to the relative carrier-envelope phase slip among subharmonic pulses had an accumulated phase error of 0.24 rad in the 1-mHz-1-MHz region. The fluctuation of the beat frequency measured by a 1-s-averaged counter was less than 1 mHz in a 1480-s measurement.
RESUMEN
We propose a method for single-shot measurement of the carrier-envelope phase of high-intensity laser pulses. The method is based on observation of the electrons' spatial distribution ionized by a time-dependent polarization pulse generated by a combination of replicas of the measuring pulse. The dependence of the electrons' angular distribution on carrier-envelope phase, pulse width, delay between two combining components, and a peak intensity is calculated. Important experimental issues such as broadening of the angular distribution, Gouy phase, difference between the two replicas, and asymmetric pulse shape are also discussed.