A new insight for investigating the prenatal and postnatal ossification centers of pelvic and femur bones in white New Zealand rabbits (Oryctolagus cuniculus) using 3D CT, double stain technique, and morphometry.

BACKGROUND: The ossification centers in rabbit limbs are related to fetal age and bone maturation. OBJECTIVE: To address the limited studies on ossification in the hind limbs of New Zealand rabbits, we investigated the prenatal and postnatal development of the pelvic and femur bones. METHODS: Double staining with Alcian Blue and Alizarin Red, computed tomography (CT), and 3D reconstruction were employed to visualize and analyze ossification centers in detail. RESULTS: Using double staining, we observed these patterns: At prenatal days 18 and 21, ossification centers appeared in the ilium. By prenatal days 23 and 25, ossification began in the ischium. On postnatal day 1, ilium ossification centers spread across most of the ilium wings, except for the iliac crest, and new centers appeared in the pubis and cotyloid bones. Most bones had ossified by the third week and one month postnatal, except for the iliac crest and ischial tuberosity. At 1.5 months, both were fully ossified. On day 18 post coitum, an ossification center was visible in the middle of the femur shaft. By day 28 post coitum, ossification extended through the shaft, and postnatally, new ossification spots appeared at the extremities by day one and week one. By the third week, complete ossification of the femur head, lesser trochanter, third trochanter, medial condyle, and lateral condyle was observed. At 1.5 months, the entire proximal extremity was ossified. CONCLUSION: 3D CT provided clear imaging of ossification progression in the pelvic and femur bones. This study enhances our understanding of vertebrate skeletal development.

Novel Insights Into the Architecture of Macro and Microstructures in Cattle Ossa Cordis.

Ossa cordis, bones located within the heart trigones, are often classified as heterotopic or ectopic bones. Despite their high prevalence in cattle and some other bovids, little is known about their structure or development. Scanning electron microscopy, X-ray microtomography, gross dissections, and measurements showed the anatomical locations, prevalence, shapes, and measurements of the cardiac bones in both Egyptian Baladi cattle and Holstein-Friesians. All cattle (n = 12) had an Ossa cordis dextrum (average = 50.70 × 20.91 × 5.40 mm). Additionally, 80% Egyptian Baladi and 57% Holstein-Friesian had a smaller Ossa cordis sinistrum (average = 24.94 × 12.75 × 4.12 mm). Egyptian Baladi Ossa cordis were smaller than observed in Holstein-Friesians. Energy-dispersive X-ray analysis showed the elemental constitution (carbon, oxygen, calcium, nitrogen, phosphorus, sodium, and magnesium) of Ossa cordis and Cartilago cordis. These imaging techniques, plus four histological stains (hematoxylin and eosin, Crossman's trichrome, Alcian blue with Van Gieson, and Sirius Red) and microscopy, demonstrated osteoblasts, osteocytes, osteoclasts, astrocytes, blood vessels, bone marrow, lamellar and woven bone, cortical bone, trabeculations with pores and canaliculi, and fibrous components including collagen in the Ossa cordis dextrum and sinistrum. Hyaline cartilage and fibrocartilage (chondrocytes and cartilage matrix) were found within and surrounding the Ossa cordis. These findings were additionally compared against other cattle breeds and species.

Heart ventricles of the dromedary camel (Camelus dromedarius): new insights from sectional anatomy, 3D computed tomography, and morphometry.

BACKGROUND: Dromedary camel heart morphology is a crucial research topic with clinical applications. The study aims to understand the dromedary camel anatomy, morphology, and architecture of the ventricular mass. RESULTS: Sagittal and transverse gross sections were compared to sagittal, transverse, and 3D render volume reconstruction computed tomography (CT) scans. The subepicardial fat, which covered the heart base, the coronary groove (sulcus coronarius), the left longitudinal interventricular groove (sulcus interventricularis paraconalis), and the right longitudinal interventricular groove (sulcus interventricularis subsinuosus), had a relatively low density with a homogeneous appearance in the 3D render volume CT. The pericardium in the color cardiac window was identified better than the black and white window (ghost). Transverse and sagittal CT scans demonstrated the internal structures of the heart, including the right atrioventricular orifice (ostium atrioventriculare dextrum), right atrioventricular orifice (ostium atrioventriculare sinistrum), and aortic orifice (ostium aortae), chordae tendineae, the cusps of the valves (cuspis valvae), and the papillary muscles (musculi papillares). The papillary muscle (musculi papillares) was presented with a more moderate density than the rest of the heart, and the cusps of the valves (cuspis valvae) had a lower density. The ventricular wall (margo ventricularis) exhibited different densities: the outer part was hyperdense, while the inner part was hypodense. The thicknesses of the ventricular mural wall and the interventricular septum (septum atrioventriculare) were highest at the midpoint of the ventricular mass, and the lowest value was present toward the apical part. The coronary groove (sulcus coronarius) circumference measured 51.14 ± 0.72 cm, and the fat in the coronary groove (sulcus coronarius) (56 ± 6.55 cm2) represented 28.7% of the total cross-sectional area. CONCLUSION: The current study provided more information about ventricular mass measurements by gross and CT analysis on the heart, which provides a valuable guide for future cardiac CT investigations in camels in vivo.

Anatomical oropharyngeal cavity specialisations in the cutlassfish (Trichiurus lepturus, Linnaeus, 1758).

Trichiurus lepturus is a carnivorous fish, and most of the previous anatomical research has focused on computed tomography imaging and histology of their teeth and fangs, while the remaining structures of pharyngeal cavity remain unexplored. The present research is the first to use anatomical examinations alongside scanning electron microscopy to investigate the T. lepturus oral cavity. The oropharyngeal roof included teeth, upper lip, rostral and caudal velum and the palate. The middle of the palate showed a median groove flanked by two folds, followed by a median band flanked by micro-folds, thereafter the palate became crescent shaped. The lateral regions of the palate exhibited longitudinal folds that extended rostrally towards the fangs. The oropharyngeal floor had two cavities which acted as a scabbard for the premaxillary fangs and upper velum, while the caudal sublingual cavity contained two oyster-shaped structures on the outer surface plus sublingual ridges and sublingual clefts. The tongue apex exhibited a spoon-like shape, its body demonstrated a median elevation and the root with two lateral branches contained only dome-shaped papillae. Taste buds were located on the upper velum, lower lip and the caudal part of the interbranchial septum. Images and descriptions of T. lepturus tooth structure are also provided. The present research, using anatomical dissection and morphological observation using scanning electron microscopy, has identified the structures of the dentition system, a variety in shapes of the folds and microridges, and identified the taste buds and mucous pores in the T. lepturus oropharyngeal cavity.

Ossa cordis and os aorta in the one-humped camel: Computed tomography, light microscopy and morphometric analysis.

The present study describes the morphological characteristics of the camel heart Ossa cordis, and os aorta using computed tomography soft tissue window (CT) alongside 3D render volume reconstructions and light microscopy. The current study techniques demonstrated the Ossa cordis and os aorta in the cardiac window with more precision than the black and white (ghost), and angiography images. Transverse and sagittal CT images additionally demonstrated the presence of Ossa cordis and os aorta. This study is the first to record two small Ossa cordis sinistrum and one os aorta in the camel heart, in addition to the more commonly observed singular, large, os cordis dextrum. The os cordis dextrum was always located in the upper part of the interventricular septum, near to its junction with the atrium, forming an elongated rectangular shape when observed transversally. The wider cranial part was composed from bone, whereas the caudal aspect was narrow and contained both bone and cartilage. Light microscopy identified that the os cordis dextrum consisted of trabecular bone, marrow spaces, and hyaline cartilage. Two Ossa cordis sinistrum were detected on the left side of the heart, one in the right fibrous ring and another in the interventricular septum, microscopy showed that both contained only trabecular bone with osteocytes, osteoblasts, and osteoclasts. At the level of ascending aorta, there was also trabecular bone containing osteocytes, an os aorta.

3D render volume CT reconstruction of the bones and arteries of the hind digit of the dromedary camel (Camelus dromedarius).

BACKGROUND: The 3D computed tomography produces detailed images of the digit bones in addition to the angiograph render volume 3D of the CT shows the relation between the arteries, bones, and tissues of the digit. Therefore, the present study used those imaging techniques to provide a complete description of the digit bones and arteries' origin, distribution, and course and their relations with surrounding structures in the Dromedary Camel. Which would serve as a guide for surgeons and students in distinguishing normal digit structures. The study used eight hind limbs of four adult camels of both sexes (two males and two females), aged 9-15 years (Mean ± SD, 11.80 ± 2.59 years). The samples were injected with latex with lead oxide were undergone 3D render volume CT (128-slice multi-detector CT scanning protocol) and angiography x-rays. RESULTS: The blood vessels and correlated structures such as bones, tendons, and ligaments were examined using 3D CT in all directions, which was easier to view than angiography and dissected specimens. The arterial supply to the camel's hind foot was the A. digitalis plantaris communis III. The angiography render volume 3D of CT explained the blood supply of the bones and joints of digital regions and showed a good visualization of the many digit arteries. The metatarsals, the phalanges, and the sesamoid bones were visualized. A. plantaris medialis superficialis, A. digitalis plantaris communis III, A. digitalis plantaris communis II and IV, A. interdigitalis, rami articularis medialis and lateralis to the fetlock joint, ramus medialis and ramus lateralis of the A. digitalis plantaris communis III, A. digitalis plantaris propriae III et IV abaxialis, A. digitalis plantaris propriae III et IV axialis, Ramus phalangis axialis and abaxialis of the first phalanx, Ramus phalangis axialis and abaxialis of the second and third phalanges, and A. metatarsae plantaris III were visualized. The study discovered new blood vessel sources in dromedary camels, such as the ramus articularis to the fetlock and the ramus plantaris phalangis abaxialis proximalis and distalis of the first phalanx. CONCLUSIONS: The digital circulation angiography investigates the circulatory pattern of the camel hind digit, which can assist clinicians in diagnosing digit region affections. 3D CT explained improved visualization of bones and arteries, including many small branches in relation to surrounding structures, in some views better than others.