RESUMEN
Out-of-plane pressure and electron doping can affect interlayer interactions in van der Waals materials, modifying their crystal structure and physical and chemical properties. In this study, we used magnetic monolayer 1T/1T'-CrS2 and high symmetry 2D-honeycomb material GeC to construct a GeC/CrS2/GeC triple layered van der Waals heterostructure (vdWH). Based on density functional theory calculations, we found that applying out-of-plane strain and doping with electrons could induce a 1T'-to-1T phase transition and consequently the ferromagnetic (FM)-to-antiferromagnetic (AFM) transition in the CrS2 layer. Such a phase and magnetic transition arises from the pressure and electron-induced interlayer interaction enhancement. The electron doping can effectively decrease the critical compressive stress from â¼4.3 GPa (charge neutrality) to â¼664 MPa (Q = 9 × 10-3 e- per atom) for the FM-to-AFM transition. These properties could be used to fabricate and program the 2D lateral FM/AFM heterostructures for artificial controlled spin texture and miniaturized spintronic devices.
RESUMEN
Exploiting dual-functional photoelectrodes to harvest and store solar energy is a challenging but efficient way for achieving renewable energy utilization. Herein, multi-heterostructures consisting of N-doped carbon coated MoS2 nanosheets supported by tubular TiO2 with photoelectric conversion and electronic transfer interfaces are designed. When a photo sodium ion battery (photo-SIB) is assembled based on the heterostructures, its capacity increases to 399.3â mAh g-1 with a high photo-conversion efficiency of 0.71 % switching from dark to visible light at 2.0â A g-1 . Remarkably, the photo-SIB can be recharged by light only, with a striking capacity of 231.4â mAh g-1 . Experimental and theoretical results suggest that the proposed multi-heterostructures can enhance charge transfer kinetics, maintain structural stability, and facilitate the separation of photo-excited carriers. This work presents a new strategy to design dual-functional photoelectrodes for efficient use of solar energy.
RESUMEN
As the power density of electronic devices continuously increases, there is a growing demand to improve the heat conduction performance of thermal management materials for addressing heat dissipation issues. Single-/few-layer graphene is a promising candidate as a filler of a metal matrix due to its extremely high thermal conductivity (k); however, the well-arranged assembly of 2D-component graphene with a high volume fraction remains challenging. Herein, we integrated a novel graphene-based macroscopic material of graphene film (GF) into a Cu matrix by infiltrating molten Zr-microalloyed Cu into a spirally folded and upright-standing GFs skeleton. The microstructure of the GF/Cu composites was regulated by an interface modification strategy. The GF/Cu composites with a spirally layered microstructure exhibit a superior k of 820 W/m K in the axial direction, much higher than that of Cu-matrix composites reinforced with graphene nanosheets (generally <500 W/m K) and twice that of Cu. The thermal transfer mechanisms were investigated by experiments and theoretical calculations. The results reveal that the excellent performance is attributed to the construction of high-heat conduction channels and a positive coordinating effect at the Zr-modified GF/Cu interface. Meanwhile, the relation between interfacial microstructure and heat transfer is established in the composites using interfacial thermal resistance as a bridge. This work yields in-depth insight into the heat conduction mechanism in highly oriented structures and provides a promising solution for the thermal management issues of high-power electronics.
RESUMEN
Redox mediators (RMs) have a substantial ability to govern oxygen reduction reaction (ORR) in Li-O2 batteries, which can realize large capacity and high-rate capability. However, studies on understanding RM-assisted ORR mechanisms are still in their infancy. Herein, a quinone-based molecule, vitamin K1 (VK1), is first used as the ORR RM for Li-O2 batteries, together with 2,5-di-tert-butyl-1,4-benzoquinone (DBBQ), to elucidate key factors on the catalytic activity of RMs. By combining experiments and first-principle computations, we demonstrate that the reduced VK1 has strong oxygen affinity and can effectively retard the deposition of Li2O2 films on the electrode surface, thereby guaranteeing enough active sites for electron transfer. Besides, the low reaction free energy of disproportionation of the Li(VK1)O2 intermediate into Li2O2 also significantly accelerates the ORR process. Consequently, the catalytic activity of VK1 is significantly boosted, and the discharge capacity of VK1-assisted batteries is 3.2-4.5 times that of DBBQ-assisted batteries. This study provides new insight for better understanding the working roles of RMs in Li-O2 batteries.
RESUMEN
As a kind of efficient adsorptive material, hydrogel has a wide application prospect within different fields, owing to its unique 3D network structures composed of polymers. In this paper, different synthetic strategies, crosslinking methods and their corresponding limitations and outstanding contributions of applications in the fields of removing environmental pollutants are reviewed to further provide a prospective view of their applications in water resources sustainability. Furthermore, the applications within the biomedical field, especially in wound dressing, are also reviewed in this paper, mainly due to their unique water retention ability, antibacterial ability, and good biocompatibility. Finally, the development direction of hydrogels in the fields of environmental remediation and biomedicine were summarized and prospected.
RESUMEN
MXenes have been used as substrate materials for single-atom catalysts (SACs) due to their unique two-dimensional (2D) structure, high surface area, and high electronic conductivity. Oxygen is the primary terminating group of MXenes; however, all of the reported Pt SACs till now are fabricated with F-terminated MXenes. According to the first-principles calculations of this work, the failure of using O-terminated MXenes as substrates is due to the low charge density around Pt and C, which weakens the catalytic activity of Pt. By adjusting the electronic structure of M2C using a second submetal with a lower work function than M, 18 potential bifunctional Pt SACs are constructed based on O-terminated bimetal MXenes. After further consideration of some important practical application factors such as overpotential, solvation effect, and reaction barriers, only four of them, i.e., Cr2Nb2C3O2-VO-Pt, Cr2Ta2C3O2-VO-Pt, Cr2NbC2O2-VO-Pt, and Cr2TaC2O2-VO-Pt, are screened as bifunctional oxygen reduction reaction/oxygen evolution reaction (ORR/OER) catalysts. All of these screened SACs are originated from Cr-based MXenes, implying the significance of Cr-based MXenes in designing bifunctional Pt SACs.
RESUMEN
Structure determines properties, and properties determine applications, which is an important ideology of natural sciences. For optical materials, it is vital to lucubrate the corresponding relationship between the local crystal structure and luminescence properties for their design, synthesis, and application. This work reports a newly designed Y2Mg2Al2Si2O12(YMAS):Eu3+ red phosphor, in which difunctional Eu3+ ion is used as a red-light activator and spectroscopic probe. The qualitative and quantitative studies on the relationship between the local crystal structure and the luminescence properties of YMAS:Eu3+ are performed experimentally and computationally, using the Y3Al5O12 (YAG):Eu3+ as contrast. Moreover, compared with YAG:Eu3+, the newly designed YMAS:Eu3+ has stronger luminescence, superior Commission Internationale de L'Eclairage chromaticity coordinates, a lower optimal doping concentration, and equally excellent thermal stability. The satisfactory color-rendering index of packaged white-light-emitting diodes demonstrates its potential performance as a red phosphor. Briefly, this work provides not only a new case for the study of the local crystal structure and luminescence properties but also a new possibility for the application of a red phosphor in solid-state lighting.
RESUMEN
A novel metallic carbon allotrope, Q-carbon, was discovered using first-principles calculations. The named Q-carbon possessed a three-dimensional (3D) cage structure formed by carbon atoms with three ligands. The energy distribution of electrons in different orbitals revealed that Q-carbon has a low degree of s-p orbital hybridization. The calculated Li+ binding energies suggested Li+ aggregation inside Q-carbon during lithiation. As a result, a Li8C32 phase was formed and gradually expanded in Q-carbon, implying a typical two-phase transition. This allowed Q-carbon to have a constant theoretical voltage of 0.40 V, which effectively inhibited Li dendrite formation. A stable Li8C32/C32 two-phase interface was confirmed by stress-strain analysis, and a calculated Li+ diffusion barrier of â¼0.50 eV ensured effective Li+ diffusion along a 3D pathway. This study was of great significance for the understanding of two-phase transition of Li+ storage materials and provided a new insight into the design of new carbon materials for energy storage applications.
RESUMEN
Multiple negative factors, including the poor electronic conductivity of sulfur, dissolution and shuttling of lithium polysulfides (Li2Sn), and sluggish decomposition of solid Li2S, seriously hinder practical applications of lithium-sulfur (Li-S) batteries. To solve these problems, a general strategy was proposed for enhancing the electrochemical performance of Li-S batteries using surface-functionalized Ti3C2 MXenes. Functionalized Ti3C2T2 (T = N, O, F, S, and Cl) showed metallic conductivity, as bare Ti3C2. Among all Ti3C2T2 investigated, Ti3C2S2, Ti3C2O2, and Ti3C2N2 offered moderate adsorption strength, which effectively suppressed Li2Sn dissolution and shuttling. This Ti3C2T2 exhibited effective electrocatalytic ability for Li2S decomposition. The Li2S decomposition barrier was significantly decreased from 3.390 eV to â¼0.4 eV using Ti3C2S2 and Ti3C2O2, with fast Li+ diffusivity. Based on these results, O- and S-terminated Ti3C2 were suggested as promising host materials for S cathodes. In addition, appropriate functional group vacancies could further promote anchoring and catalytic abilities of Ti3C2T2 to boost the electrochemical performance of Li-S batteries. Moreover, the advantages of a Ti3C2T2 host material could be well retained even at high S loading, suggesting the potential of surface-modified MXene for confining sulfur in Li-S battery cathodes.
RESUMEN
Transition metal polysulfides with high S content, such as VS4, TiS4, and MoS3, have high specific Li+ capacities, but their reaction mechanisms for lithium-ion batteries remain unclear due to unknown intermediate products. In this work, first-principles calculations based on the density functional theory were performed to reveal the electrochemical properties of VS4 for lithium-ion batteries. The results demonstrated multiple phase transformations during Li+ insertion, starting with nucleation transformation from VS4 to Li3VS4 and followed by gradual decomposition reactions. Enthalpy-driven long-range migration of Li2S molecules resulted in crystalline to amorphous transformation during decomposition. S and V successively behaved as redox centers for Li xVS4 before and after x = 3. Moreover, low activation energy and high Li+ diffusivity were observed at room temperature, revealing superior rate capability of the material.
RESUMEN
The adsorption and activation of O2 is regarded as the first critical step for the oxygen reduction reaction (ORR), and catalysts with a high performance toward O2 adsorption and activation would provide a theoretical foundation for further investigations. Here, we have studied the adsorption and electronic properties as well as the catalytic activities of group 9-11 single metal atoms deposited on NbC(001), denoted M/NbC(001). According to the location of the d-band centers and the frontier molecular orbital analysis, single metals of Co, Rh, Ir and Ni on NbC(001) exhibit higher activities than other metals (Pd, Pt, Cu, Ag and Au). The quite different catalytic activities of M/NbC(001) may be attributed to the differences in their electro-negativities and work-functions. Meanwhile, the reasonable stabilities of Co, Rh, Ir and Ni on NbC(001) were clarified by investigating the agglomeration resistance and oxidation resistance, and the results indicate that Co and Ni have poor oxidative stability, and Rh and Ir are antioxidants on NbC(001). Further research into the adsorption and activation of O2 confirmed the outstanding properties of Rh/NbC(001) and Ir/NbC(001), which may provide great opportunities to find alternative catalysts.