Operando Nanoscale Imaging of Electrochemically Induced Strain in a Locally Polarized Pt Grain.

Developing new methods that reveal the structure of electrode materials under polarization is key to constructing robust structure-property relationships. However, many existing methods lack the spatial resolution in structural changes and fidelity to electrochemical operating conditions that are needed to probe catalytically relevant structures. Here, we combine a nanopipette electrochemical cell with three-dimensional X-ray Bragg coherent diffractive imaging to study how strain in a single Pt grain evolves in response to applied potential. During polarization, marked changes in surface strain arise from the Coulombic attraction between the surface charge on the electrode and the electrolyte ions in the electrochemical double layers, while the strain in the bulk of the crystal remains unchanged. The concurrent surface redox reactions have a strong influence on the magnitude and nature of the strain changes under polarization. Our studies provide a powerful blueprint to understand how structural evolution influences electrochemical performance at the nanoscale.

A Semicrystalline Furanic Polyamide Made from Renewable Feedstocks.

Semi-aromatic polyamides (SAPs) synthesized from petrochemical diacids and diamines are high-performance polymers that often derive their desirable properties from a high degree of crystallinity. Attempts to develop partially renewable SAPs by replacing petrochemical diacids with biobased furan-2,5-dicarboxylic acid (FDCA) have resulted in amorphous materials or polymers with low melting temperatures. Herein, we report the development of poly(5-aminomethyl-2-furoic acid) (PAMF), a semicrystalline SAP synthesized by the polycondensation of CO2 and lignocellulose-derived monomer 5-aminomethyl-2-furoic acid (AMF). PAMF has glass-transition and melting temperatures comparable to that of commercial materials and higher than that of any previous furanic SAP. Additionally, PAMF can be copolymerized with conventional nylon 6 and is chemically recyclable. Molecular dynamics (MD) simulations suggest that differences in intramolecular hydrogen bonding explain why PAMF is semicrystalline but many FDCA-based SAPs are not.

Hypophosphite addition to alkenes under solvent-free and non-acidic aqueous conditions.

Hypophosphite adds to alkenes in high yields under solvent-free conditions at elevated temperature, including α,ß-unsaturated carboxylates. The reaction proceeds by a radical mediated pathway. Hypophosphite addition is also effective under non-acidic aqueous conditions employing radical initiators. These methods complement other hypophosphite addition reactions and simplify the synthesis of polyfunctional H-phosphinates.

Microstructural origin of locally enhanced CO2 electroreduction activity on gold.

Understanding how the bulk structure of a material affects catalysis on its surface is critical to the development of actionable catalyst design principles. Bulk defects have been shown to affect electrocatalytic materials that are important for energy conversion systems, but the structural origins of these effects have not been fully elucidated. Here we use a combination of high-resolution scanning electrochemical cell microscopy and electron backscatter diffraction to visualize the potential-dependent electrocatalytic carbon dioxide [Formula: see text] electroreduction and hydrogen [Formula: see text] evolution activity on Au electrodes and probe the effects of bulk defects. Comparing colocated activity maps and videos to the underlying microstructure and lattice deformation supports a model in which CO2 electroreduction is selectively enhanced by surface-terminating dislocations, which can accumulate at grain boundaries and slip bands. Our results suggest that the deliberate introduction of dislocations into materials is a promising strategy for improving catalytic properties.

A framework for automated structure elucidation from routine NMR spectra.

Methods to automate structure elucidation that can be applied broadly across chemical structure space have the potential to greatly accelerate chemical discovery. NMR spectroscopy is the most widely used and arguably the most powerful method for elucidating structures of organic molecules. Here we introduce a machine learning (ML) framework that provides a quantitative probabilistic ranking of the most likely structural connectivity of an unknown compound when given routine, experimental one dimensional 1H and/or 13C NMR spectra. In particular, our ML-based algorithm takes input NMR spectra and (i) predicts the presence of specific substructures out of hundreds of substructures it has learned to identify; (ii) annotates the spectrum to label peaks with predicted substructures; and (iii) uses the substructures to construct candidate constitutional isomers and assign to them a probabilistic ranking. Using experimental spectra and molecular formulae for molecules containing up to 10 non-hydrogen atoms, the correct constitutional isomer was the highest-ranking prediction made by our model in 67.4% of the cases and one of the top-ten predictions in 95.8% of the cases. This advance will aid in solving the structure of unknown compounds, and thus further the development of automated structure elucidation tools that could enable the creation of fully autonomous reaction discovery platforms.

Phase Behavior That Enables Solvent-Free Carbonate-Promoted Furoate Carboxylation.

Solvent-free chemistry has been used to streamline synthesis, reduce waste, and access novel reactivity, but the physical nature of the reaction medium in the absence of solvent is often poorly understood. Here we reveal the phase behavior that enables the solvent-free carboxylation reaction in which carbonate, furan-2-carboxylate (furoate), and CO2 react to form furan-2,5-dicarboxylate (FDCA2-). This transformation has no solution-phase analogue and can be applied to convert lignocellulose into performance-advantaged plastics. Using operando powder X-ray diffraction and thermal analysis to elucidate the temperature- and conversion-dependent phase composition, we find that the reaction medium is a heterogeneous mixture of a ternary eutectic molten phase, solid Cs2CO3, and solid Cs2FDCA. During the reaction, the amounts of molten phase and solid Cs2CO3 diminish as solid Cs2FDCA accumulates. These insights are critical for increasing the scale of furoate carboxylation and provide a framework for guiding the development of other solvent-free transformations.

Point-of-Care Analysis of Blood Ammonia with a Gas-Phase Sensor.

Elevated blood ammonia (hyperammonemia) may cause delirium, brain damage, and even death. Effective treatments exist, but preventing permanent neurological sequelae requires rapid, accurate, and serial measurements of blood ammonia. Standard methods require volumes of 1 to 3 mL, centrifugation to isolate plasma, and a turn-around time of 2 h. Collection, handling, and processing requirements mean that community clinics, particularly those in low resource settings, cannot provide reliable measurements. We describe a method to measure ammonia from small-volume whole blood samples in 2 min. The method alkalizes blood to release gas-phase ammonia for detection by a fuel cell. When an inexpensive first-generation instrument designed for 100 µL of blood was tested on adults and children in a clinical study, the method showed a strong correlation (R2 = 0.97) with an academic clinical laboratory for plasma ammonia concentrations up to 500 µM (16 times higher than the upper limit of normal). A second-generation hand-held instrument designed for 10-20 µL of blood showed a near-perfect correlation (R2 = 0.99) with healthy donor blood samples containing known amounts of added ammonium chloride up to 1000 µM. Our method can enable rapid and inexpensive measurement of blood ammonia, transforming diagnosis and management of hyperammonemia.

Comparing Scanning Electron Microscope and Transmission Electron Microscope Grain Mapping Techniques Applied to Well-Defined and Highly Irregular Nanoparticles.

Investigating how grain structure affects the functional properties of nanoparticles requires a robust method for nanoscale grain mapping. In this study, we directly compare the grain mapping ability of transmission Kikuchi diffraction (TKD) in a scanning electron microscope to automated crystal orientation mapping (ACOM) in a transmission electron microscope across multiple nanoparticle materials. Analysis of well-defined Au, ZnO, and ZnSe nanoparticles showed that the grain orientations and GB geometries obtained by TKD are accurate and match those obtained by ACOM. For more complex polycrystalline Cu nanostructures, TKD provided an interpretable grain map whereas ACOM, with or without precession electron diffraction, yielded speckled, uninterpretable maps with orientation errors. Acquisition times for TKD were generally shorter than those for ACOM. Our results validate the use of TKD for characterizing grain orientation and grain boundary distributions in nanoparticles, providing a framework for the broader exploration of how microstructure influences nanoparticle properties.

Carbonate-promoted C-H carboxylation of electron-rich heteroarenes.

C-H carboxylation is an attractive transformation for both streamlining synthesis and valorizing CO2. The high bond strength and very low acidity of most C-H bonds, as well as the low reactivity of CO2, present fundamental challenges for this chemistry. Conventional methods for carboxylation of electron-rich heteroarenes require very strong organic bases to effect C-H deprotonation. Here we show that alkali carbonates (M2CO3) dispersed in mesoporous TiO2 supports (M2CO3/TiO2) effect CO3 2--promoted C-H carboxylation of thiophene- and indole-based heteroarenes in gas-solid reactions at 200-320 °C. M2CO3/TiO2 materials are strong bases in this temperature regime, which enables deprotonation of very weakly acidic bonds in these substrates to generate reactive carbanions. In addition, we show that M2CO3/TiO2 enables C3 carboxylation of indole substrates via an apparent electrophilic aromatic substitution mechanism. No carboxylations take place when M2CO3/TiO2 is replaced with un-supported M2CO3, demonstrating the critical role of carbonate dispersion and disruption of the M2CO3 lattice. After carboxylation, treatment of the support-bound carboxylate products with dimethyl carbonate affords isolable esters and the M2CO3/TiO2 material can be regenerated upon heating under vacuum. Our results provide the basis for a closed cycle for the esterification of heteroarenes with CO2 and dimethyl carbonate.

A closed cycle for esterifying aromatic hydrocarbons with CO2 and alcohol.

The ability to functionalize hydrocarbons with CO2 could create opportunities for high-volume CO2 utilization. However, current methods to form carbon-carbon bonds between hydrocarbons and CO2 require stoichiometric consumption of very resource-intensive reagents to overcome the low reactivity of these substrates. Here, we report a simple semi-continuous cycle that converts aromatic hydrocarbons, CO2 and alcohol into aromatic esters without consumption of stoichiometric reagents. Our strategy centres on the use of solid bases composed of an alkali carbonate (M2CO3, where M+ = K+ or Cs+) dispersed over a mesoporous support. Nanoscale confinement disrupts the crystallinity of M2CO3 and engenders strong base reactivity at intermediate temperatures. The overall cycle involves two distinct steps: (1) CO32--promoted C-H carboxylation, in which the hydrocarbon substrate is deprotonated by the supported M2CO3 and reacts with CO2 to form a supported carboxylate (RCO2M); and (2) methylation, in which RCO2M reacts with methanol and CO2 to form an isolable methyl ester with concomitant regeneration of M2CO3.

Polyamide monomers via carbonate-promoted C-H carboxylation of furfurylamine.

Inedible biomass (lignocellulose) is a largely untapped resource for polymer production because it is synthetically challenging to convert to useful monomers. Here we describe streamlined syntheses of two polyamide monomers from furfurylamine, one of very few chemicals made industrially from lignocellulose. Using carbonate-promoted C-H carboxylation, furfurylamine is converted into a furan-containing amino acid and a tetrahydrofuran-containing bicyclic lactam in two and four steps, respectively. Our syntheses avoid the use of protecting groups and multiple stoichiometric organic reagents required by previous, longer routes to these targets. This work facilitates access to furan- and tetrahydrofuran-based polyamides, which are unavailable from petrochemical feedstocks.

Carbonate-Promoted Hydrogenation of Carbon Dioxide to Multicarbon Carboxylates.

CO2 hydrogenation is a potential alternative to conventional petrochemical methods for making commodity chemicals and fuels. Research in this area has focused mostly on transition-metal-based catalysts. Here we show that hydrated alkali carbonates promote CO2 hydrogenation to formate, oxalate, and other C2+ carboxylates at elevated temperature and pressure in the absence of transition-metal catalysts or solvent. The reactions proceed rapidly, reaching up to 56% yield (with respect to CO32-) within minutes. Isotope labeling experiments indicate facile H2 and C-H deprotonations in the alkali cation-rich reaction media and identify probable intermediates for the C-C bond formations leading to the various C2+ products. The carboxylate salts are in equilibrium with volatile carboxylic acids under CO2 hydrogenation conditions, which may enable catalytic carboxylic acid syntheses. Our results provide a foundation for base-promoted and base-catalyzed CO2 hydrogenation processes that could complement existing approaches.

Selective increase in CO2 electroreduction activity at grain-boundary surface terminations.

Altering a material's catalytic properties requires identifying structural features that give rise to active surfaces. Grain boundaries create strained regions in polycrystalline materials by stabilizing dislocations and may provide a way to create high-energy surfaces for catalysis that are kinetically trapped. Although grain-boundary density has previously been correlated with catalytic activity for some reactions, direct evidence that grain boundaries create surfaces with enhanced activity is lacking. We used a combination of bulk electrochemical measurements and scanning electrochemical cell microscopy with submicrometer resolution to show that grain-boundary surface terminations in gold electrodes are more active than grain surfaces for electrochemical carbon dioxide (CO2) reduction to carbon monoxide (CO) but not for the competing hydrogen (H2) evolution reaction. The catalytic footprint of the grain boundary is commensurate with its dislocation-induced strain field, providing a strategy for broader exploitation of grain-boundary effects in heterogeneous catalysis.

Imaging the Hydrogen Absorption Dynamics of Individual Grains in Polycrystalline Palladium Thin Films in 3D.

Defects such as dislocations and grain boundaries often control the properties of polycrystalline materials. In nanocrystalline materials, investigating this structure-function relationship while preserving the sample remains challenging because of the short length scales and buried interfaces involved. Here we use Bragg coherent diffractive imaging to investigate the role of structural inhomogeneity on the hydriding phase transformation dynamics of individual Pd grains in polycrystalline films in three-dimensional detail. In contrast to previous reports on single- and polycrystalline nanoparticles, we observe no evidence of a hydrogen-rich surface layer and consequently no size dependence in the hydriding phase transformation pressure over a 125-325 nm size range. We do observe interesting grain boundary dynamics, including reversible rotations of grain lattices while the material remains in the hydrogen-poor phase. The mobility of the grain boundaries, combined with the lack of a hydrogen-rich surface layer, suggests that the grain boundaries are acting as fast diffusion sites for the hydrogen atoms. Such hydrogen-enhanced plasticity in the hydrogen-poor phase provides insight into the switch from the size-dependent behavior of single-crystal nanoparticles to the lower transformation pressures of polycrystalline materials and may play a role in hydrogen embrittlement.

Bragg coherent diffractive imaging of single-grain defect dynamics in polycrystalline films.

Polycrystalline material properties depend on the distribution and interactions of their crystalline grains. In particular, grain boundaries and defects are crucial in determining their response to external stimuli. A long-standing challenge is thus to observe individual grains, defects, and strain dynamics inside functional materials. Here we report a technique capable of revealing grain heterogeneity, including strain fields and individual dislocations, that can be used under operando conditions in reactive environments: grain Bragg coherent diffractive imaging (gBCDI). Using a polycrystalline gold thin film subjected to heating, we show how gBCDI resolves grain boundary and dislocation dynamics in individual grains in three-dimensional detail with 10-nanometer spatial and subangstrom displacement field resolution. These results pave the way for understanding polycrystalline material response under external stimuli and, ideally, engineering particular functions.

Molecular catalysis at polarized interfaces created by ferroelectric BaTiO3.

The local environment at polarized solid-liquid interfaces provides a unique medium for chemical reactions that could be exploited to control the selectivity of non-faradaic reactions. Polarized interfaces are commonly prepared by applying a voltage to an electrode in an electrolyte solution, but it is challenging to achieve high surface charge densities while suppressing faradaic reactions. Ferroelectric materials have permanent surface charge densities that arise from the dipole moments of ferroelectric domains and can be used to create polarized solid-liquid interfaces without applying a voltage. We studied the effects of ferroelectric oxides on the selectivity of a Rh porphyrin-catalyzed carbene rearrangement. The addition of ferroelectric BaTiO3 nanoparticles to the reaction solution changed the product ratio in the same direction and by a similar magnitude as performing the reaction at an electrode-electrolyte interface polarized by a voltage. The results demonstrate that colloidal suspensions of BaTiO3 nanoparticles act as a dispersible polarized interface that can influence the selectivity of non-faradaic reactions.

Electrostatic Control of Regioselectivity in Au(I)-Catalyzed Hydroarylation.

Competing pathways in catalytic reactions often involve transition states with very different charge distributions, but this difference is rarely exploited to control selectivity. The proximity of a counterion to a charged catalyst in an ion paired complex gives rise to strong electrostatic interactions that could be used to energetically differentiate transition states. Here we investigate the effects of ion pairing on the regioselectivity of the hydroarylation of 3-substituted phenyl propargyl ethers catalyzed by cationic Au(I) complexes, which forms a mixture of 5- and 7-substituted 2H-chromenes. We show that changing the solvent dielectric to enforce ion pairing to a SbF6- counterion changes the regioselectivity by up to a factor of 12 depending on the substrate structure. Density functional theory (DFT) is used to calculate the energy difference between the putative product-determining isomeric transition states (ΔΔE‡) in both the presence and absence of the counterion. The change in ΔΔE‡ upon switching from the unpaired transition states in high solvent dielectric to ion paired transition states in low solvent dielectric (Δ(ΔΔE‡)) was found to be in good agreement with the experimentally observed selectivity changes across several substrates. Our calculations indicate that the origin of Δ(ΔΔE‡) lies in the preferential electrostatic stabilization of the transition state with greater charge separation by the counterion in the ion paired case. By performing calculations at multiple different values of the solvent dielectric, we show that the role of the solvent in changing selectivity is not solely to enforce ion pairing, but rather that interactions between the ion paired complex and the solvent also contribute to Δ(ΔΔE‡). Our results provide a foundation for exploiting electrostatic control of selectivity in other ion paired systems.

A Direct Grain-Boundary-Activity Correlation for CO Electroreduction on Cu Nanoparticles.

Copper catalyzes the electrochemical reduction of CO to valuable C2+ products including ethanol, acetate, propanol, and ethylene. These reactions could be very useful for converting renewable energy into fuels and chemicals, but conventional Cu electrodes are energetically inefficient and have poor selectivity for CO vs H2O reduction. Efforts to design improved catalysts have been impeded by the lack of experimentally validated, quantitative structure-activity relationships. Here we show that CO reduction activity is directly correlated to the density of grain boundaries (GBs) in Cu nanoparticles (NPs). We prepared electrodes of Cu NPs on carbon nanotubes (Cu/CNT) with different average GB densities quantified by transmission electron microscopy. At potentials ranging from -0.3 V to -0.5 V vs the reversible hydrogen electrode, the specific activity for CO reduction to ethanol and acetate was linearly proportional to the fraction of NP surfaces comprised of GB surface terminations. Our results provide a design principle for CO reduction to ethanol and acetate on Cu. GB-rich Cu/CNT electrodes are the first NP catalysts with significant CO reduction activity at moderate overpotential, reaching a mass activity of up to ∼1.5 A per gram of Cu and a Faradaic efficiency >70% at -0.3 V.