Exfoliation Technology for Scalable Ligand-Free Core-Semishell Metal Nanoparticle Films.

Core-shell metallic nanoparticles (NPs) are considered promising materials for their multifunctional properties. However, traditionally synthesized NPs have crucial issues that their ligands interfere with the direct interaction between NPs and neighboring materials, and it is very difficult to form a uniform film without the mixture of a template. In this article, we report an unprecedented exfoliation technology for fabricating a scalable ligand-free core-semishell metal NP film based on the evaporation system through a self-assembled monolayer-assisted surface energy control combined with a deep ultraviolet surface treatment around the core NPs. Owing to fabrication merits, the properties of the core-semishell NPs can be easily modulated depending on the shell material; the ligand-free core-shell NPs are directly attached to the surface of a material by Scotch tape, allowing interfacial interactions. Therefore, the proposed technique presents a new scientific method for studying interfacial interactions with heterogeneous materials and can be universally applied in optoelectronic devices, biopatches, photocatalysts, and so on.

Controlling of lattice strains for crack-free and strong ferroelectric barium titanate films by post-thermal treatment.

In this study, we experimentally demonstrate fabrication of ultra-smooth and crystalline barium titanate (BTO) films on magnesium oxide (MgO) substrates by engineering lattice strain and crystal structure via thermal treatment. We observe that oxygen-depleted deposition allows growth of highly strained BTO films on MgO substrates with crack-free surface. In addition, post-thermal treatment relaxes strain, resulting in an enhancement of ferroelectricity. Surface roughening of the BTO films caused by recrystallization during post-thermal treatment is controlled by chemical-mechanical polishing (CMP) to retain their initial ultra-smooth surfaces. From Raman spectroscopy, reciprocal space map (RSM), and capacitance-voltage (C-V) curve measurements, we confirm that the ferroelectricity of BTO films strongly depend on the relaxation of lattice strain and the phase transition from a-axis to c-axis oriented crystal structure.

A Super-Boosted Hybrid Plasmonic Upconversion Process for Photodetection at 1550 nm Wavelength.

A super-boosted hybrid plasmonic upconversion (UC) architecture comprising a hierarchical plasmonic upconversion (HPU) film and a polymeric microlens array (MLA) film is proposed for efficient photodetection at a wavelength of 1550 nm. Plasmonic metasurfaces and Au core-satellite nanoassembly (CSNA) films can strongly induce a more effective plasmonic effect by providing numerous hot spots in an intense local electromagnetic field up to wavelengths exceeding 1550 nm. Hence, significant UC emission enhancement is realized via the amplified plasmonic coupling of an HPU film comprising an Au CSNA and UC nanoparticles. Furthermore, an MLA polymer film is synergistically coupled with the HPU film, thereby focusing the incident near-infrared light in the micrometer region, including the plasmonic nanostructure area. Consequently, the plasmonic effect super-boosted by microfocusing the incident light, significantly lowers the detectable power limit of a device, resulting in superior sensitivity and responsivity at weak excitation powers. Finally, a triple-cation perovskite-based photodetector coupled with the hybrid plasmonic UC film exhibits the excellent values of responsivity and detectivity of 9.80 A W-1 and 8.22 × 1012 Jones at a weak power density of ≈0.03 mW cm-2 , respectively, demonstrating that the device performance is enhanced by more than 104 magnitudes over a reference sample.

Ultra-Lightweight, Flexible InGaP/GaAs Tandem Solar Cells with a Dual-Function Encapsulation Layer.

Lightweight, flexible solar cells from III-V semiconductors offer new application opportunities for devices that require a power supply, such as cars, drones, satellites, or wearable devices, due to their outstanding efficiency and power-to-weight ratio (specific power). However, the specific power and stability of flexible photovoltaic (PV) devices need to be enhanced for use in such applications because current flexible PV devices are vulnerable to moisture and heat. Here, we develop ultra-lightweight, flexible InGaP/GaAs tandem solar cells with a dual-function encapsulation layer that serves as both a moisture barrier and an antireflection coating for the active device layer. Using a thin polymer film as a substrate and an ultrathin metal as a bonding layer, the total weight of the device is dramatically reduced. Therefore, the specific power of our solar cells is remarkably high with a value of over 5000 W/kg under the AM 1.5G solar spectrum. Additionally, there is no degradation even if the solar cells are exposed to harsh environmental conditions.

Quantum cascade lasers with Y2O3 insulation layer operating at 8.1 µm.

SiO2 is a commonly used insulation layer for QCLs but has high absorption peak around 8 to 10 µm. Instead of SiO2, we used Y2O3 as an insulation layer for DC-QCL and successfully demonstrated lasing operation at the wavelength around 8.1 µm. We also showed 2D numerical analysis on the absorption coefficient of our DC-QCL structure with various parameters such as insulating materials, waveguide width, and mesa angle.

Alternative Patterning Process for Realization of Large-Area, Full-Color, Active Quantum Dot Display.

Although various colloidal quantum dot (QD) coating and patterning techniques have been developed to meet the demands in optoelectronic applications over the past years, each of the previously demonstrated methods has one or more limitations and trade-offs in forming multicolor, high-resolution, or large-area patterns of QDs. In this study, we present an alternative QD patterning technique using conventional photolithography combined with charge-assisted layer-by-layer (LbL) assembly to solve the trade-offs of the traditional patterning processes. From our demonstrations, we show repeatable QD patterning process that allows multicolor QD patterns in both large-area and microscale. Also, we show that the QD patterns are robust against additional photolithography processes and that the thickness of the QD patterns can be controlled at each position. To validate that this process can be applied to actual device applications as an active material, we have fabricated inverted, differently colored, active QD light-emitting device (QD-LED) on a pixelated substrate, which achieved maximum electroluminescence intensity of 23 770 cd/m2, and discussed the results. From our findings, we believe that our process provides a solution to achieving both high-resolution and large-scale QD pattern applicable to not only display, but also to practical photonic device research and development.

GaInAsP/InP lateral-current-injection distributed feedback laser with a-Si surface grating.

We fabricated a novel lateral-current-injection-type distributed feedback (DFB) laser with amorphous-Si (a-Si) surface grating as a step to realize membrane lasers. This laser consists of a thin GaInAsP core layer grown on a semi-insulating InP substrate and a 30-nm-thick a-Si surface layer for DFB grating. Under a room-temperature continuous-wave condition, a low threshold current of 7.0 mA and high efficiency of 43% from the front facet were obtained for a 2.0-µm stripe width and 300-µm cavity length. A small-signal modulation bandwidth of 4.8 GHz was obtained at a bias current of 30 mA.