RESUMEN
We report three highly efficient multiresonance thermally activated delayed fluorescence blue-emitter host materials that include 5,9-dioxa-13b-boranaphtho[3,2,1-de]anthracene (DOBNA) and tetraphenylsilyl groups. The host materials doped with the conventional N7,N7,N13,N13,5,9,11,15-octaphenyl-5,9,11,15-tetrahydro-5,9,11,15-tetraaza-19b,20b-diboradinaphtho[3,2,1-de:1',2',3'-jk]pentacene-7,13-diamine (ν-DABNA) blue emitter exhibit a high photoluminescence quantum yield greater than 0.82, a high horizontal orientation greater than 88%, and a short photoluminescence decay time of 0.96-1.93 µs. Among devices fabricated using six synthesized compounds, the device with (4-(2,12-di-tert-butyl-5,9-dioxa-13b-boranaphtho[3,2,1-de]anthracen-7-yl)phenyl)triphenylsilane (TDBA-Si) shows high external quantum efficiency values of 36.2/35.0/31.3% at maximum luminance/500 cd m-2/1,000 cd m-2. This high performance is attributed to fast energy transfer from the host to the dopant. Other factors possibly contributing to the high performance are a T1 excited-state contribution, inhibition of aggregation by the bulky tetraphenylsilyl groups, high horizontal orientation, and high thermal stability. We achieve a high efficiency greater than 30% and a small roll-off value of 4.9% at 1,000 cd m-2 using the TDBA-Si host material.
RESUMEN
Two new deep-blue emitters with bipolar properties based on an organoboron acceptor and carbazole donor were newly synthesized: 2-(9H-carbazol-9-yl)-5-(2,12-di-tert-butyl-5,9-dioxa-13b-boranaphtho [3,2,1-de]anthracen-7-yl)-5H-benzo[b]carbazole (TDBA-BCZ) and 5-(2,12-di-tert-butyl-5,9-dioxa-13b-boranaphtho [3,2,1-de]anthracen-7-yl)-8-phenyl-5,8-dihydroindolo[2,3-c]carbazole (TDBA-PCZ). The two emitters showed deep-blue and real-blue photoluminescence emission in their solution and film states, respectively. The doped spin-coated films were prepared using synthesized materials and showed a root-mean-square roughness of less than 0.52 nm, indicating excellent surface morphology. The doped devices, fabricated via a solution process using TDBA-BCZ and TDBA-PCZ as the dopants, showed electroluminescence peaks at 428 and 461 nm, corresponding to the Commission Internationale de L'éclairage (CIE) coordinates of (0.161, 0.046) and (0.151, 0.155), respectively. The external quantum efficiency (EQE)/current efficiency (CE) of the solution-processed forward devices, with TDBA-BCZ and TDBA-PCZ as dopants, were 7.73%/8.67 cd/A and 10.58%/14.24 cd/A, respectively. An inverted OLED device fabricated using rod-shaped ZnO nanoparticles as an electron injection layer showed a CE of 1.09 cd/A and an EQE of 0.30%.
RESUMEN
Novel yellow azo pyridone dye derivatives were synthesized for use in image-sensor color filters. The synthesized compounds have a basic chemical structure composed of azo, hydroxy, amide, and nitrile groups as well as different halide groups. New materials were evaluated on the basis of their optical, thermal, and surface properties under conditions mimicking those of a commercial device fabrication process. A comparison of their related performance revealed that, among the four prepared compounds, 5-((4,6-dichlorocyclohexa-2,4-dien-1-yl)diazenyl)-6-hydroxy-1,4-dimethyl-2-oxo-1,2-dihydropyridine-3-carbonitrile (Cl-PAMOPC) exhibited the best performance as an image-sensor color filter material, including a solubility greater than 0.1 wt% in propylene glycol monomethyl ether acetate solvent, a high decomposition temperature of 263 °C, and stable color difference values of 4.93 and 3.88 after a thermal treatment and a solvent-resistance test, respectively. The results suggest that Cl-PAMOPC can be used as a green dye additive in an image-sensor colorant.
Asunto(s)
Dihidropiridinas , Compuestos Inorgánicos , Acetatos , Amidas , Compuestos Azo/química , Color , Colorantes/química , Nitrilos , Piridonas , SolventesRESUMEN
Three organic blue-light-emitting tetraphenylethylene (TPE) derivatives that exhibit aggregation-induced emission (AIE) were used as additives in the preparation of inorganic perovskite-structured green-light-emitting materials for three-color white-light emission. For these organic-inorganic light-emitting materials, two-color (blue and green) light-emitting films based on the CsPbBr3 perovskite-structured green-light-emitting inorganic material were prepared. The three TPE derivatives were prepared by varying the number of bromide groups, and a distinct AIE effect was confirmed when the derivatives were dissolved in a water-tetrahydrofuran mixed solvent containing 90 vol% water. When 0.2 molar ratio of the 1,1,2,2-tetrakis(4-bromophenyl)ethylene (TeBrTPE) additive was mixed with nanocrystal-pinning toluene solvent, the green-light-emission photoluminescence quantum efficiency (PLQY) value at 535 nm was 47 times greater than that of the pure bulk CsPbBr3 without additives and a blue emission at 475 nm was observed from the TeBrTPE itself. When a CBP:Ir(piq)3 film was prepared on top of this layer, three PL peaks with maximum wavelength values of 470, 535, and 613 nm were confirmed. The film exhibited white-light emission with CIE color coordinates of (0.25, 0.36).
RESUMEN
The development of rigid polyaromatic building blocks for narrowband violet fluorophores has received tremendous attention. Herein, we designed and synthesized two new triangle-shaped rigid building blocks, namely, 2,5-di-tert-butylindolo[3,2,1-jk]carbazole (tBuICz) and 2,11-di-tert-butylindolo[3,2,1-jk]carbazole-4-carbonitrile (tBuICzCN), and tethered them with different chromophores to yield a series of violet-blue fluorophores, viz., ICzTPA-ICzPICN, and studied their structure-function relationship. The appended chromophores and cyano unit played a vital role in controlling the optical and electrical properties of the compounds. Except triphenylamine-substituted derivatives, the compounds showed pure violet emission (λem ≤ 403 nm). Intriguingly, the compounds exhibited narrow-band emission with a full-width at half-maximum ≤ 40 nm, attributed to the rigidity of the ICz core. The emission of the compounds displayed positive solvatochromism, which is ascribed to the photoinduced intramolecular charge transfer in the excited state. The compounds revealed excellent thermal robustness with T5d ≥ 363 °C. The triphenylamine-featuring derivatives displayed a high-lying HOMO compared to their congeners due to their electron-rich nature. When we applied these materials in organic light-emitting diodes, ICzPI outperformed in the series with an EQEmax of 3.07% and a current efficiency of 1.04 cd/A. Notably, its CIEy â¼ 0.046 precisely matched with the Rec.2020 standard of deep-blue color (CIEy â¼ 0.046).
RESUMEN
New thermal-latent metal catalyst such as tetrakis (lauorate) titanium (LPTi) was designed and synthesized based on a lauroyl peroxide and titanium. The synthetic method is simple with one step reaction. LPTi structure was confirmed by FT-IR analysis, also nano-sized structure of LPTi confirmed using SEM-EDX. LPTi is thermal-latent metal catalyst including titanium that not only promotes urethane synthesis reaction but also increases the dissociation rate of blocked isocyanate. As a result of quantitative analysis of NCO (%) through back titration, when LPTi was added, NCO (%) increased from 2.34% to 3.24%. LPTi can be used as an excellent catalyst for urethane reaction by reducing the polymerization time by about 30% compared to no catalyst. LPTi can be applied to the electronic polymer synthesis.
Asunto(s)
Titanio , Uretano , Ligandos , Polimerizacion , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
In this study, a blue photoresist with the hybrid dye-pigment system was developed by mixing xanthene-based dye (XPDIA) and blue pigment 15:6 (1:1, 5 wt% of total mixture amount) in order to develop high-performance image sensors with high thermal and chemical stability. The colorant used in this study has the nano-sized particle of around 100 nm and the physical property is related with the photonic property in image sensor application such as the cameras of mobile phone, car black box, security, etc. The hybrid dye-pigment system showed a high transmittance of more than 90% at 450 nm, and Δab showed very low color difference of 0.52. In solvent resistance, high transmittance of 90% was perfectly maintained, and Δab showed low color difference of 1.08. Migration test result exhibited no change at all after dipping in PGMEA transmittance spectrum. These results are due to the high absorption optical properties of XPDIA dye in the HDPS and the high thermal and chemical stability properties of the PB15:6 pigment. As a result, it was confirmed that the mixed blue hybrid spin coating film exhibited excellent thermal and chemical stability as well as good optical property.
Asunto(s)
Colorantes , Óptica y Fotónica , SolventesRESUMEN
OLED light emitting materials have a molecular size corresponding to the nano scale and are converted into light energy when given electrical energy. The new green fluorescent dopant material was successfully synthesized by using anthracene as a central core and introducing a methyl group and tert-butyl group at various positions as diphenylamine group. Two compounds are N9,N9,N10,N10-tetraphenylanthracene-9,10-diamine (TAD) and N9,N10-bis(4-(tert-butyl) phenyl)-N9,N10-di-o-tolylanthracene-9,10-diamine (p-Tb-o-Me-TAD). The synthesized material emits green light with the maximum wavelengths of 508 and 523 nm. p-Tb-o-Me-TAD shows excellent PLQY of 86.2% in solution state. When the synthesized material was used as a dopant in a device, TAD showed current efficiency (CE) of 17.71 cd/A and external quantum efficiency (EQE) of 6.11%. The device using p-Tb-o-Me-TAD dopant exhibited current efficiency (CE) of 24.24 cd/A and external quantum efficiency (EQE) of 7.27%.
RESUMEN
Molecular size of OLED emitting materials is nano-metric size and when it is applied to the electric field it emits the light based on the energy conversion result. As new green fluorescent emitters, N,N,N',N'-Tetra-m-tolyl-anthracene-9,10-diamine (m-Me-TAD) and N,N,N',N'-Tetra-p-tolyl-anthracene-9,10-diamine (p-Me-TAD) were synthesized and the properties were evaluated. In solution state, photoluminescence (PL) maximum wavelength is 517 nm for m-Me-TAD and 529 nm for p-Me-TAD. In electroluminescence (EL) spectra, EL maximum wavelength of m-Me-TAD is 518 nm and p-Me-TAD is 533 nm. The doped device using m-Me-TAD as green fluorescent dopant exhibited current efficiency (CE) of 17.41 cd/A and external quantum efficiency (EQE) of 7.41%. The doped device with p-Me-TAD was optimized in order to achieve a green OLED with high efficiency.
RESUMEN
New green emitter is designed and synthesized by selecting anthracene having high photoluminescence quantum yield (PLQY) and diphenylamine side group substituted methyl and t-butyl group: N9,N10-bis(5-(tert-butyl)-2-methylphenyl)-N9,N10-bis(2,4-dimethylphenyl)anthracene-9,10-diamine (3Me-1Bu-TPADA). Photophysical, electrochemical, and electroluminescent (EL) properties of 3Me-1Bu-TPADA were investigated. The maximum photoluminescence (PL) emission wavelengths of 3Me-1Bu-TPADA in solution and in a film were 528 nm and 531 nm, respectively. 3Me-1Bu-TPADA has excellent thermal properties with glass transition temperatures (Tg) of 110 °C, melting temperatures (Tm) of 217 °C of, and degradation temperature (Td) of 330 °C. 3Me-1Bu-TPADA was used as an emitting layer in non-doped devices: ITO/2-TNATA (60 nm)/NPB (15 nm)/3Me-1Bu-TPADA (30 nm)/Alq3 (30 nm)/LiF (1 nm)/Al (200 nm). The 3Me-1Bu-TPADA device showed luminance efficiency of 6.05 cd/A, EQE of 2.68% at 10 mA/cm².
Asunto(s)
Antracenos , Diaminas , TemperaturaRESUMEN
In this study, a triarylmethine derivative of DMCEBA-BTSA with the high thermal and chemical stability was newly synthesized in order to develop a high-performance image sensor. It showed a high transmittance of more than 80% at 450 nm and â³Eab showed a very low color difference of 2.32 after thermal treatment. In solvent resistance, transmittance of 90% was not changed and â³Eab showed a low color difference of 0.67 before and after solvent dipping. As a results of the migration test, there was no change at all after dipping in the PGMEA transmittance spectrum. It was confirmed that the newly synthesized blue colorant exhibited excellent thermal and chemical stability and it could be applied to image sensor color filter application as the blue color.
Asunto(s)
Color , SolventesRESUMEN
Two green fluorescent materials, N,N,N',N'-Tetra-o-tolyl-anthracene-9,10-diamine (o-Me-TAD) and N,N'-bis(2,5-dimethylphenyl)-N,N'-di-o-tolylanthracene-9,10-diamine (DMe-o-Me-TAD) including anthracene and diphenylamine moiety, were synthesized by Buchwald-Hartwig amination. In solution state, PL maximum wavelength of o-Me-TAD and DMe-o-Me-TAD is 518 nm and 520 nm. The doped device using o-Me-TAD as green fluorescent dopant exhibited CE of 19.78 cd/A and EQE of 5.97%. The doped device using DMe-o-Me-TAD as dopant exhibited CE of 22.37 cd/A and EQE of 7.02% without roll-off. Doped devices fabricated using o-Me-TAD and DMe-o-Me-TAD show the EL peaks at 522 and 523 nm corresponding to the Commission Internationale de L'Eclairage (CIE) coordinates of (0.29, 0.63) and (0.27, 0.61).
RESUMEN
A new hole-transporting material, poly-2-(9H-carbazol-9-yl)-5-(4-vinylphenyl)-5H-benzo[b]carbazole (PBCZCZ), was developed for perovskite light-emitting diodes (PeLEDs). This polymer, which is based on the benzocarbazole moiety, has good solubility in common solvents and enabled the fabrication of highly efficient multilayer perovskite devices. It has excellent film morphology and a high hole mobility of 3.67 × 10-5 cm2 V-1 s-1, which made it possible to vary the device configuration. Green and sky-blue perovskite PeLEDs using PBCZCZ as the hole-transporting layer had current efficiencies and external quantum efficiencies (EQEs) of 43.90 cd A-1 and 8.67% for the green device and 9.07 cd A-1 and 4.04% for the sky-blue device, respectively. The EQE of the green PeLEDs was about 2.5 times higher and that of the sky-blue PeLEDs was about 3 times higher than the device made with the commercial HTL of poly(9-vinylcarbazole) (PVK). The operational device lifetimes of the green and sky-blue PeLEDs made with PBCZCZ were about 4.1 and 4.8 times higher than the PVK-containing device, respectively.
RESUMEN
The aim of this study was to demonstrate the anti-inflammatory effect of Lactobacillus kefirgranum PRCC-1301-derived extracellular vesicles (PRCC-1301 EVs) on intestinal inflammation and intestinal barrier function. Human intestinal epithelial cells (IECs) Caco-2 were treated with PRCC-1301 EVs and then stimulated with dextran sulfate sodium (DSS). Real-time RT-PCR revealed that PRCC-1301 EVs inhibited the expression of pro-inflammatory cytokines in Caco-2 cells. PRCC-1301 EVs enhanced intestinal barrier function by maintaining intestinal cell integrity and the tight junction. Loss of Zo-1, claudin-1, and occludin in Caco-2 cells and the colitis tissues was recovered after PRCC-1301 EVs treatment, as evidenced by immunofluorescence analysis. Acute murine colitis was induced using 4% DSS and chronic colitis was generated in piroxicam-treated IL-10-/- mice. PRCC-1301 EVs attenuated body weight loss, colon shortening, and histological damage in acute and chronic colitis models in mice. Immunohistochemistry revealed that phosphorylated NF-κB p65 and IκBα were reduced in the colon tissue sections treated with PRCC-1301 EVs. Our results suggest that PRCC-1301 EVs may have an anti-inflammatory effect on colitis by inhibiting the NF-κB pathway and improving intestinal barrier function.
RESUMEN
New triazene based metal complexes such as Cu[1-(phenyldiazenyl)piperidine]2Br2 (BTACHCuBr2), Cu[1-(phenyldiazenyl)piperidine]2Cl2 (BTACH-CuCl2), Ni[1-(phenyldiazenyl)piperidine]2Cl2 (BTACH-NiCl2 · 6H2O), Cu[2,2,6,6-tetramethyl-1-(phenyldiazenyl)piperidine]2Cl2 (BTACM-SnCl2), Ti[2,2,6,6-tetramethyl-1-(phenyldiazenyl)piperidine]2Cl2 (BTACM-TiCl2) were synthesized. All of the five compounds did not absorb in the visible light wavelength region and it does not have the color change disadvantage when using as an additive in polymerization. All materials also had thermal stability up to 245 °C. Among the synthesized compounds, BTACH-CuBr2 showed the best radical inhibitor property when n-hexyl acrylate monomer was polymerized with the synthesized metal complexes at 150 °C isothermal condition. It exhibited more than 5 times of the polymerization delayed initiation compared to other synthesized metal complexes cases.
RESUMEN
BACKGROUND: Genomic data have become major resources to understand complex mechanisms at fine-scale temporal and spatial resolution in functional and evolutionary genetic studies, including human diseases, such as cancers. Recently, a large number of whole genomes of evolving populations of yeast (Saccharomyces cerevisiae W303 strain) were sequenced in a time-dependent manner to identify temporal evolutionary patterns. For this type of study, a chromosome-level sequence assembly of the strain or population at time zero is required to compare with the genomes derived later. However, there is no fully automated computational approach in experimental evolution studies to establish the chromosome-level genome assembly using unique features of sequencing data. METHODS AND RESULTS: In this study, we developed a new software pipeline, the integrative meta-assembly pipeline (IMAP), to build chromosome-level genome sequence assemblies by generating and combining multiple initial assemblies using three de novo assemblers from short-read sequencing data. We significantly improved the continuity and accuracy of the genome assembly using a large collection of sequencing data and hybrid assembly approaches. We validated our pipeline by generating chromosome-level assemblies of yeast strains W303 and SK1, and compared our results with assemblies built using long-read sequencing and various assembly evaluation metrics. We also constructed chromosome-level sequence assemblies of S. cerevisiae strain Sigma1278b, and three commonly used fungal strains: Aspergillus nidulans A713, Neurospora crassa 73, and Thielavia terrestris CBS 492.74, for which long-read sequencing data are not yet available. Finally, we examined the effect of IMAP parameters, such as reference and resolution, on the quality of the final assembly of the yeast strains W303 and SK1. CONCLUSIONS: We developed a cost-effective pipeline to generate chromosome-level sequence assemblies using only short-read sequencing data. Our pipeline combines the strengths of reference-guided and meta-assembly approaches. Our pipeline is available online at http://github.com/jkimlab/IMAP including a Docker image, as well as a Perl script, to help users install the IMAP package, including several prerequisite programs. Users can use IMAP to easily build the chromosome-level assembly for the genome of their interest.
Asunto(s)
Análisis de Secuencia de ADN , Programas Informáticos , Cromosomas Fúngicos , Genoma Fúngico , Anotación de Secuencia Molecular , Sintenía/genéticaRESUMEN
Pyrene, imidazole and dibenzofuran were used to synthesize new blue emitters of 1-(4-(dibenzo[b,d]furan-4-yl)phenyl)-2-(pyren-1-yl)-1H-phenanthro[9,10-d]imidazole (BFP-PI) and 1-(4-(dibenzo[b,d]furan-4-yl)phenyl)-4,5-diphenyl-2-(pyren-1-yl)-1H-imidazole (BFP-DPI). In the film state, BFP-PI and BFP-DPI show photoluminescence (PL) maximum values of 462 nm and 459 nm. The relative PL quantum efficiency (PLQY) of BFP-PI and BFP-DPI is 89.16% and 79.2% by using reference compound of 9,10-diphenylanthracene. The device using BFP-PI in the non-doped state as emitting material showed current efficiency (C.E.) of 3 cd/A and external quantum efficiency (E.Q.E.) of 2.15%, and the device using BFP-DPI as emitting material exhibited C.E. of 2.64 cd/A and E.Q.E. of 1.6%.
RESUMEN
We have synthesized green fluorescent emitters of N9,N9,N10,N10-tetraphenylanthracene-9,10-diamine (TAD) and N9,N9,N10,N10-tetra-o-tolylanthracene-9,10-diamine (oMe-TAD) including anthracene and diphenylamine moiety and evaluated properties of compounds. The methyl groups were introduced to the diphenylamine to prevent molecular aggregation of the dopant and reduce self-quenching through steric hindrance of molecular structure. In solution state, photoluminescence (PL) maximum wavelength is 508 nm for TAD and 519 nm for oMe-TAD. In film state, PL maximum wavelength is 518 nm for TAD and 527 nm for oMe-TAD. In electroluminescence (EL) spectra, EL maximum wavelength of TAD is 508 nm and EL maximum wavelength of oMe-TAD is 522 nm. The doped device using TAD as green fluorescent dopant exhibited CE of 17.7 cd/A, PE of 7.74 lm/W, and EQE of 6.11%. The doped device using oMe-TAD as dopant exhibited CE of 19.8 cd/A, PE of 7.23 lm/W, and EQE of 5.97%.
RESUMEN
White OLED (WOLED) devices were fabricated using blue emitting materials, TP-AA-TP, TP-AA-TPB, and TPB-AA-TPB, and yellow emitting material polyphenylenevinylene derivative (PDY 132). Three devices were fabricated with the following structure: ITO/PEDOT:PSS (50 nm)/PDY-132 (40 nm)/NPB (10 nm)/Blue EML (30 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm). PDY-132 was used by spin coating, and then three blue fluorescent materials were used by vapor deposition to form a white light emitting device. The color coordinates of WOLED using TP-AA-TP, TP-AA-TPB and TPB-AA-TPB were (0.291, 0.317), (0.317, 0.371) and (0.345, 0.457), respectively. Device using TP-AA-TP as blue emitting material showed the highest efficiencies at 10 mA/cm², L.E of 5.58 cd/A, P.E of 2.16 lm/W and E.Q.E of 2.96%.
RESUMEN
In this study, four emitters of blue light are synthesized by selecting pyrene with its high photoluminescence quantum yield (PLQY) as the core group and variants of the electron-donating diphenylamine (DPA) as side groups. The four compounds have different numbers, sizes, and substitution positions of alkyl groups on the DPA. Each of the four compounds when doped in OLED devices shows a high current efficiency (CE) of over 7 cd A-1 and a high external quantum efficiency (EQE) of over 7.5%. In addition, the compounds yield electroluminescence (EL) spectra showing peaks with narrow full width at half-maximum (fwhm) values of 37-40 nm and hence indicative of high color purity. Moreover, one compound N1,N6-bis(5-( tert-butyl)-2-methylphenyl)-N1,N6-bis(2,4-dimethylphenyl)pyrene-1,6-diamine (3Me-1Bu-TPPDA), shows a very high EQE of 9.25% and a very long lifetime with an LT95 of 471 h.