A visual detection strategy for SARS-CoV-2 based on dual targets-triggering DNA walker.

SARS-CoV-2, a highly transmissible and mutagenic virus, made huge threats to global public health. The detection strategies, which are free from testing site requirements, and the reagents and instruments are portable, are vital for early screening and play a significant role in curbing the spread. This work proposed a silver-coated glass slide (SCGS)/DNA walker based on a dual targets-triggering mechanism, enzyme-catalyzed amplification, and smartphone data analysis, which build a portable visual detection strategy for the SARS-CoV-2 RNA-dependent RNA polymerase (RdRp) gene. By this method, the detection was reflected by the ultraviolet absorbance changes and visible color changes to the naked eye which was analyzed by Red-Green-Blue (RGB) data analysis via smartphone within 30 min, simplifying the detection process and shortening the detection time. Meanwhile, the dual targets-triggering mechanism and dual signal amplification strategy ensured detection specificity and sensitivity. Further, the practicability was verified by the detection of the real sample which provided this method an application potential in SARS-CoV-2 rapid detection.

Halogen-Doped Carbon Dots: Synthesis, Application, and Prospects.

Carbon dots (CDs) have many advantages, such as tunable photoluminescence, large two-photon absorption cross-sections, easy functionalization, low toxicity, chemical inertness, good dispersion, and biocompatibility. Halogen doping further improves the optical and physicochemical properties of CDs, extending their applications in fluorescence sensors, biomedicine, photocatalysis, anti-counterfeiting encryption, and light-emitting diodes. This review briefly describes the preparation of CDs via the "top-down" and "bottom-up" approaches and discusses the preparation methods and applications of halogen (fluorine, chlorine, bromine, and iodine)-doped CDs. The main challenges of CDs in the future are the elucidation of the luminescence mechanism, fine doping with elements (proportion, position, etc.), and their incorporation in practical devices.

Carboxymethyl chitosan-based electrospun nanofibers with high citral-loading for potential anti-infection wound dressings.

As a natural antibacterial agent with pleasant fragrance, citral possesses low aqueous solubility. To improve citral loading in hydrophilic nanofiber, Pickering emulsion electrospinning strategy was proposed for anti-infection dressing development. The in-situ aggerated ß-cyclodextrin-citral inclusion complex particles (ßCPs) were used as emulsion stabilizers, while citral and carboxymethyl chitosan (CMCS)/polyvinyl alcohol (PVA) mixed solutions were used as the inner "dispersed oil phase" and outer "continuous water phase", respectively. The results of electronic microscope investigation shown ßCPs possessed regular cube appearances with a size of 5.5 ± 2.2 µm, which might improve the emulsion storage stability based on visual investigation. Moreover, randomly oriented and bead-on-string nanofibers with ßCPs uniformly distributed could be obtained under optimized compositions and electrospinning parameters. Despite volatilization during electrospinning, nanofibers with high citral loading possessed good antibacterial performance against Staphylococcus aureus and Escherichia coli. In vitro hemolysis test indicated that nanofibers were hemocompatible. In addition, both fiber matrix and citral could promote the proliferation of mouse fibroblast cells. And the permeability of the fibers was adjustable. Thus, CMCS/PVA/ßCPs/citral nanofibers could potentially protect wound from infection. In summary, CMCS/PVA/ßCPs/citral nanofibers seemed to be promising alternatives to conventional wound dressings.

The Ameliorating Effect of Plasma Protein from Tachypleus tridentatus on Cyclophosphamide-Induced Acute Kidney Injury in Mice.

In the study, the protective effect of plasma protein from Tachypleus tridentatus (PPTT) on acute kidney injury (AKI) and the related molecular mechanisms were first investigated by Western blotting analyses, TdT-mediated dUTP Nick-End Labeling (TUNEL) assay, and immunohistochemistry. It was found that PPTT had an obviously inhibitory effect on Reactive oxygen species (ROS) in cyclophosphamide (CTX)-exposed mice. Furthermore, results demonstrated that the renal cell death mode is due to inducing apoptosis and autophagy inhibited by dose-dependent PPTT in mice treated with CTX by decreasing the protein expression of bax, beclin-1, and LC3 and increasing the expression of bcl-2. Moreover, the p38 MAPK and PI3K/Akt signaling pathways were observed to take part in the PPTT-induced renal cell growth effect by enhancing the upregulation of the expression of Akt and p-Akt as well as the downregulation of the expression of p38 and p-p38, which indicated a PPTT ameliorating effect on AKI CTX-induced in mice through p38 MAPK and PI3K/Akt signaling pathways. Briefly, this article preliminarily studies the mechanism of the PPTT ameliorating effect on AKI CTX-induced in mice, which helps to provide a reference for PPTT clinical application in AKI therapy.

Squid ink polysaccharide prevents chemotherapy induced injury in the testes of reproducing mice.

The present study was conducted to investigate the preventive effects of squid ink polysaccharides (SIP) on the damage of sperm and reproduction induced by cyclophosphamide that is most commonly used for treating clinically cancers. Male Kunming mice exposed to cyclophosphamide were administered with SIP and were sacrificed to determine sperm parameters, testicular antioxidant ability and reproductive capacity. Data indicated that cyclophosphamide caused obvious changes in mice such as significant reduction (P<0.01) of glutathione reductase activity (GR), vitamin C (Vc) content and total antioxidant capacity (T-AOC) in the testes, as well as elevation (P<0.01) of abnormal rates of sperm and fetus, and a decrease in the total fetal count and average fetal count (P<0.01), were totally alleviated by SIP. From these findings it can be concluded that SIP decreases chemotherapeutic damage to sperm and reproduction in mice induced by cyclophosphamide.

Recent Synthesis Developments of Organoboron Compounds via Metal-Free Catalytic Borylation of Alkynes and Alkenes.

Diboron reagents have been traditionally regarded as "Lewis acids", which can react with simple Lewis base to create a significant nucleophilic character in one of boryl moieties. In particular, bis(pinacolato)diboron (B2pin2) reacts with simple Lewis bases, such as N-heterocyclic carbenes (NHCs), phosphines and alkoxides. This review focuses on the application of trivalent nucleophilic boryl synthon in the selective preparation of organoboron compounds, mainly through metal-free catalytic diboration and the ß-boration reactions of alkynes and alkenes.

Meta-analysis of estradiol for luteal phase support in in vitro fertilization/intracytoplasmic sperm injection.

OBJECTIVE: To evaluate whether the addition of E(2) for luteal phase support (LPS) in IVF/intracytoplasmic sperm injection (ICSI) could improve the outcome of clinical pregnancy. DESIGN: Meta-analysis. SETTING: University hospital center. PATIENT(S): Women underwent IVF or ICSI using the GnRH agonist or GnRH antagonist protocol. INTERVENTION(S): Progesterone alone or combined with E(2) for LPS. MAIN OUTCOME MEASURE(S): Clinical pregnancy rate per patient (CPR/PA), clinical pregnancy rate per ET, implantation rate, ongoing pregnancy rate per patient, clinical abortion rate, and ectopic pregnancy rate. RESULT(S): Fifteen relevant randomized controlled trials (RCTs) were identified that included a total of 2,406 patients. There was no statistical difference between E(2) + P group and P-only group regarding the primary outcome of CPR/PA for different routes of administration of E(2) (oral, vaginal, and transdermal) or other relevant outcome measures. No significant effect was observed for different daily doses of E(2) (6, 4, and 2 mg), even through oral medication in CPR/PA. CONCLUSION(S): The best available evidence suggests that E(2) addition during the luteal phase does not improve IVF/ICSI outcomes through oral medication, even with different daily doses. Furthermore, RCTs that study other administration routes are needed.

The protective effect of 18ß-Glycyrrhetinic acid against UV irradiation induced photoaging in mice.

It has been confirmed that repeated exposure of skin to ultraviolet (UV) radiation results in cutaneous oxidative stress and inflammation, which act in concert to cause premature skin aging, well known as photoaging. 18ß-Glycyrrhetinic acid (GA), widely used to treat various tissue inflammations, is the main active component of licorice root, and has also been shown to possess favorable anti-oxidative property and modulating immunity function. In the present study, we investigated the potential protective effect of GA on UV-induced skin photoaging in a mouse model. During the experimental period of ten consecutive weeks, the dorsal depilated skin of mice was treated with topical GA for 2 hours prior to UV irradiation. The results showed that GA pretreatment significantly alleviated the macroscopic and histopathological damages in mice skin caused by UV. Meanwhile, the data also indicated that GA markedly up-regulated the activities of the antioxidant enzymes (SOD, GSH-Px), and increased the content of skin collagen, while obviously decreased malonaldehyde level and inhibited high expressions of matrix metalloproteinase-1 (MMP-1) and -3 (MMP-3), as well as down-regulated the expression of inflammatory cytokines such as IL-6, TNF-α and IL-10. Taken together, these findings amply demonstrate that GA observably attenuates UV-induced skin photoaging mainly by virtue of its antioxidative and anti-inflammatory properties, as well as regulating the abnormal expression of MMP-1 and MMP-3.

A graphene-based electrochemical sensor for sensitive detection of paracetamol.

An electrochemical sensor based on the electrocatalytic activity of functionalized graphene for sensitive detection of paracetamol is presented. The electrochemical behaviors of paracetamol on graphene-modified glassy carbon electrodes (GCEs) were investigated by cyclic voltammetry and square-wave voltammetry. The results showed that the graphene-modified electrode exhibited excellent electrocatalytic activity to paracetamol. A quasi-reversible redox process of paracetamol at the modified electrode was obtained, and the over-potential of paracetamol decreased significantly compared with that at the bare GCE. Such electrocatalytic behavior of graphene is attributed to its unique physical and chemical properties, e.g., subtle electronic characteristics, attractive pi-pi interaction, and strong adsorptive capability. This electrochemical sensor shows an excellent performance for detecting paracetamol with a detection limit of 3.2x10(-8)M, a reproducibility of 5.2% relative standard deviation, and a satisfied recovery from 96.4% to 103.3%. The sensor shows great promise for simple, sensitive, and quantitative detection and screening of paracetamol.

Glucose oxidase-graphene-chitosan modified electrode for direct electrochemistry and glucose sensing.

Direct electrochemistry of a glucose oxidase (GOD)-graphene-chitosan nanocomposite was studied. The immobilized enzyme retains its bioactivity, exhibits a surface confined, reversible two-proton and two-electron transfer reaction, and has good stability, activity and a fast heterogeneous electron transfer rate with the rate constant (k(s)) of 2.83 s(-1). A much higher enzyme loading (1.12 x 10(-9)mol/cm(2)) is obtained as compared to the bare glass carbon surface. This GOD-graphene-chitosan nanocomposite film can be used for sensitive detection of glucose. The biosensor exhibits a wider linearity range from 0.08mM to 12mM glucose with a detection limit of 0.02mM and much higher sensitivity (37.93microAmM(-1)cm(-2)) as compared with other nanostructured supports. The excellent performance of the biosensor is attributed to large surface-to-volume ratio and high conductivity of graphene, and good biocompatibility of chitosan, which enhances the enzyme absorption and promotes direct electron transfer between redox enzymes and the surface of electrodes.

Glucose biosensor based on immobilization of glucose oxidase in platinum nanoparticles/graphene/chitosan nanocomposite film.

The bionanocomposite film consisting of glucose oxidase/Pt/functional graphene sheets/chitosan (GOD/Pt/FGS/chitosan) for glucose sensing is described. With the electrocatalytic synergy of FGS and Pt nanoparticles to hydrogen peroxide, a sensitive biosensor with a detection limit of 0.6 microM glucose was achieved. The biosensor also has good reproducibility, long-term stability and negligible interfering signals from ascorbic acid and uric acid comparing with the response to glucose. The large surface area and good electrical conductivity of graphene suggests that graphene is a potential candidate as a sensor material. The hybrid nanocomposite glucose sensor provides new opportunity for clinical diagnosis and point-of-care applications.

Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized in hybrid organic-inorganic film of chitosan/sol-gel/carbon nanotubes.

A hybrid organic-inorganic nanocomposite film of chitosan/sol-gel/multi-walled carbon nanotubes was constructed for the immobilization of horseradish peroxidase (HRP). This film was characterized by scanning electron microscopy. Direct electron transfer (DET) and bioelectrocatalysis of HRP incorporated into the composite film were investigated. The results indicate that the film can provide a favorable microenvironment for HRP to perform DET on the surface of glassy carbon electrodes with a pair of quasi-reversible redox waves and to retain its bioelectrocatalytic activity toward H(2)O(2).

Glucose biosensors based on platinum nanoparticles-deposited carbon nanotubes in sol-gel chitosan/silica hybrid.

A new strategy for fabricating a sensitivity-enhanced glucose biosensor was presented, based on multi-walled carbon nanotubes (CNT), Pt nanoparticles (PtNP) and sol-gel of chitosan (CS)/silica organic-inorganic hybrid composite. PtNP-CS solution was synthesized through the reduction of PtCl(6)(2-) by NaBH(4) at room temperature. Benefited from the amino groups of CS, a stable PtNP gel was obtained, and a CNT-PtNP-CS solution was prepared by dispersing CNT functionalized with carboxylic groups in PtNP-CS solution. The CS/silica hybrid sol-gel was produced by mixing methyltrimethoxysilane (MTOS) with the CNT-PtNP-CS solution. Then, with the immobilization of glucose oxidase (GOD) into the sol-gel, the glucose biosensor of GOD-CNT-PtNP-CS-MTOS-GCE was fabricated. The properties of resulting glucose biosensor were measured by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). In phosphate buffer solutions (PBS, pH 6.8), nearly interference free determination of glucose was realized at low applied potential of 0.1V, with a wide linear range of 1.2x10(-6) to 6.0x10(-3)M, low detection limit of 3.0x10(-7)M, high sensitivity of 2.08microA mM(-1), and a fast response time (within 5s). The results showed that the biosensor provided the high synergistic electrocatalytic action, and exhibited good reproducibility, long-term stability. Subsequently, the novel biosensor was applied for the determination of glucose in human serum sample, and good recovery was obtained (in the range of 95-104%).

Direct electrochemistry and electrocatalysis of horseradish peroxidase based on clay-chitosan-gold nanoparticle nanocomposite.

Gold nanoparticles stabilized by chitosan (AuCS) were hybridized with exfoliated clay nanoplates through electrostatic interaction. The resulting clay-chitosan-gold nanoparticle nanocomposite (Clay/AuCS) was used to modify glassy carbon electrode (GCE). HRP, a model peroxidase, was entrapped between the Clay/AuCS film and another clay layer. UV-vis spectrum suggested HRP retained its native conformation in the modified film. Basal plane spacing of clay obtained by X-ray diffraction (XRD) indicated that there was an intercalation-exfoliation-restacking process among HRP, AuCS and clay during the modified film drying. The immobilized HRP showed a pair of quasi-reversible redox peaks at -0.195 V (vs. saturated Ag/AgCl electrode) in 0.1M PBS (pH 7.0), and the biosensor displayed a fast amperometric response to H(2)O(2) with a wide linear range of 39 microM to 3.1 mM. The detection limit was 9.0 microM based on the signal to noise ratio of 3. The kinetic parameters such as alpha (charge transfer coefficient), k(s) (electron transfer rate constant) and K(m) (Michaelis-Menten constant) were evaluated to be 0.53, 2.95+/-0.20s(-1) and 23.15 mM, respectively.

A novel glucose biosensor based on immobilization of glucose oxidase in chitosan on a glassy carbon electrode modified with gold-platinum alloy nanoparticles/multiwall carbon nanotubes.

A novel glucose biosensor was constructed, based on the immobilization of glucose oxidase (GOx) with cross-linking in the matrix of biopolymer chitosan (CS) on a glassy carbon electrode (GCE), which was modified with gold-platinum alloy nanoparticles (Au-PtNPs) by electrodeposition on multiwall carbon nanotubes (CNTs) in CS film (CNTs/CS). The properties of Au-PtNPs/CNTs/CS were characterized by scan electron microscopy (SEM), X-ray diffraction (XRD), cyclic voltammetry (CV), and electrochemical impedance spectra (EIS). Primary study indicated that Au-PtNPs/CNTs had a better synergistic electrocatalytic effect on the reduction of hydrogen peroxide than did AuNPs/CNTs or PtNPs/CNTs at a low applied potential window. With GOx as a model enzyme, a new glucose biosensor was fabricated. The biosensor exhibited excellent performances for glucose at a low applied potential (0.1V) with a high sensitivity (8.53 microA mM(-1)), a low detection limit (0.2 microM), a wide linear range (0.001-7.0 mM), a fast response time (<5s), and good reproducibility, stability, and selectivity. In addition, the biosensor was applied in the determination of glucose in human blood and urine samples, and satisfied results were obtained.

Electrochemical biosensor based on multi-walled carbon nanotubes and Au nanoparticles synthesized in chitosan.

A new biosensor is prepared by cross-linking glucose oxidase (GOD) with glutaradehyde at the electrode combining Au nanoparticles (AuNP) with multi-walled carbon nanotubes (MWCNTs). Au nanoparticles-doped chitosan (CS) solution (AuNP-CS) is prepared by treating the CS solution followed by chemical reduction of Au (III) with NaBH4. MWCNTs are then dispersed in AuNP-CS solution. TEM, FT-IR, and UV-Vis show that the AuNP-CS solution is highly dispersed and stable. The synergistic effect between AuNP and CNTs of the AuNP-CNTs-CS material has been investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and amperometric methods. The modified glassy carbon electrode (GCE) allows low-potential detection of H2O2 with high sensitivity and fast response time. With the immobilization of GOD, a biosensor has been constructed. In phosphate buffer solutions (PBS, pH 7.0), nearly free interference determination of glucose has been realized at 0.4 V(vs. Ag/AgCl/3.0 M KCI) with a wide linear range from 2.0 x 10(-5) to 1.5 x 10(-2) M and a fast response time within 5s. The biosensor has been used to determine glucose in human serum samples and the results are satisfactory.

A sensitive nonenzymatic glucose sensor in alkaline media with a copper nanocluster/multiwall carbon nanotube-modified glassy carbon electrode.

Copper (Cu) nanoclusters were electrochemically deposited on the film of a Nafion-solubilized multiwall carbon nanotube (CNTs)-modified glassy carbon electrode (CNTs-GCE), which fabricated a Cu-CNTs composite sensor (Cu-CNTs-GCE) to detect glucose with nonenzyme. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were used for the characterization of the distribution of the Cu nanoclusters on the CNTs matrix. The composite of the Cu-CNTs was investigated by the electrochemical characterization of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The preliminary study shows that the nonenzymatic sensor has synergistic electrocatalytic activity to the oxidation of glucose in alkaline media. A well applicable sensor was constructed to use for the analysis of the glucose in real blood serum samples due to the large number of electrons taking part in the oxidation process, the high apparent kinetic rate constant, and the stable operation of the electrode. The linear range for the detection of the glucose is 7.0 x 10(-7) to 3.5 x 10(-3) M with a high sensitivity of 17.76 microA mM(-1), a low detection limit of 2.1 x 10(-7) M, and a fast response time of within 5s. Experiment results also showed that the sensor has good reproducibility and long-term stability and is interference free.