Efficient Surface Passivation of Ti-Based Layered Materials by a Nonfluorine Branched Copolymer for Durable and High-Power Sodium-Ion Batteries.

There is a crucial need for low-cost energy storage technology based on abundant sodium ions to realize sustainable development with renewable energy resources. Poly(vinylidene fluoride) (PVDF) is applied as a binder in sodium-ion batteries (SIBs). Nevertheless, PVDF is also known to suffer from a larger irreversible capacity, especially when PVDF is used as the binder of negative electrode materials. In this research, a poly(acrylonitrile)-grafted poly(vinyl alcohol) copolymer (PVA-g-PAN) is tested as a binder with Ti-based layered oxides as potential negative electrode materials for SIBs. The chemical stability tests of PVDF and PVA-g-PAN contacted with metallic sodium have been conducted, which reveals that PVDF experiences a defluorination process, while PVA-g-PAN demonstrates excellent chemical stability. Composite electrodes with PVA-g-PAN demonstrate superior electrochemical performances when compared with the PVDF binder, allowing improvement for initial CE, higher rate capability, and long cyclability over 1500 cycles. Detailed characterization of electrodes via soft X-ray photoelectron spectroscopy and field emission scanning electron microscopy demonstrates that the PVA-g-PAN branched structure allows a more uniform distribution of acetylene black with higher coatability, unlocking enhanced rate performances and efficient passivation of Ti-based oxides without the excessive electrolyte decomposition. These findings open a new way to design practical and durable sodium-ion batteries with a high-power density.

Mixed Polyplex Micelles with Thermoresponsive and Lysine-Based Zwitterionic Shells Derived from Two Poly(vinyl amine)-Based Block Copolymers.

Two series of poly(vinyl amine) (PVAm)-based block copolymers with zwitterionic and thermoresponsive segments were synthesized by the reversible addition-fragmentation chain transfer polymerization. A mixture of the two copolymers, poly(N-acryloyl-l-lysine) (PALysOH) and poly(N-isopropylacrylamide) (PNIPAM), which have the same cationic PVAm chain but different shell-forming segments, were used to prepare mixed polyplex micelles with DNA. Both PVAm-b-PALysOH and PVAm-b-PNIPAM showed low cytotoxicity, with characteristic assembled structures and stimuli-responsive properties. The cationic PVAm segment in both block copolymers showed site-specific interactions with DNA, which were evaluated by dynamic light scattering, zeta potential, circular dichroism, agarose gel electrophoresis, atomic force microscopy, and transmission electron microscopy measurements. The PVAm-b-PNIPAM/DNA polyplexes showed the characteristic temperature-induced formation of assembled structures in which the polyplex size, surface charge, chiroptical property of DNA, and polymer-DNA binding were governed by the nitrogen/phosphate (N/P) ratio. The DNA binding strength and colloidal stability of the PVAm-b-PALysOH/DNA polyplexes could be tuned by introducing an appropriate amount of zwitterionic PALysOH functionality, while maintaining the polyplex size, surface charge, and chiroptical property, regardless of the N/P ratio. The mixed polyplex micelles showed temperature-induced stability originating from the hydrophobic (dehydrated) PNIPAM chains upon heating, and remarkable stability under salty conditions owing to the presence of the zwitterionic PALysOH chain on the polyplex surface.

Synthesis, Assembled Structures, and DNA Complexation of Thermoresponsive Lysine-Based Zwitterionic and Cationic Block Copolymers.

A series of anionic, zwitterionic, and cationic lysine-based block copolymers with a thermoresponsive segment were synthesized by the reversible addition-fragmentation chain transfer (RAFT) polymerization of N-acryloyl- N-carbobenzoxy-l-lysine [A-Lys(Cbz)-OH], which contains a carboxylic acid and a protected amine-functionality in the monomer unit. Carboxylic acid-containing homopolymers, poly(A-Lys(Cbz)-OH), with predetermined molecular weights with relatively low polydispersities were initially synthesized by RAFT polymerization of A-Lys(Cbz)-OH. The chain extension of the dithiocarbamate-terminated poly(A-Lys(Cbz)-OH) to N-isopropylacrylamide (NIPAM) via the RAFT process and subsequent deprotection afforded the zwitterionic block copolymer composed of thermoresponsive poly(NIPAM) and poly(A-Lys-OH), which exhibited switchability among the zwitterionic, anionic, and cationic states by pH change. The assembled structures and thermoresponsive and chiroptical properties of these block copolymers were evaluated by dynamic light scattering, circular dichroism, and turbidity measurements. Finally, the cationic block copolymer, poly(A-Lys-OMe)- b-poly(NIPAM), was obtained by the methylation of the carboxylic acid group in the zwitterionic poly(A-Lys-OH) segment. Selective interactions of DNA with the cationic poly(A-Lys-OMe) segment in the lysine-based block copolymer were further evaluated by agarose gel electrophoresis and atomic force microscopy measurements, which revealed characteristic assembled structures and temperature-responsive properties of the polyplexes.

Alcohol-Soluble Cross-Linked Poly( nBA) n- b-Poly(NVTri) m Block Copolymer and Its Applications in Organic Photovoltaic Cells for Improved Stability.

In this study, a series of alcohol-soluble cross-linked block copolymers (BCPs) consisting of poly( n-butyl acrylate) (poly( nBA)) and poly( N-vinyl-1,2,4-triazole) (poly(NVTri)) blocks with different individual functions and lengths are designed and developed. These presynthesized cross-linked BCPs (PBA n-Tri m) were, for the first time, revealed to exhibit many advantages in serving as the electron-extraction layer (EEL) for organic photovoltaics (OPVs). The cross-linked BCPs possessed intense ionic functionality, showing well capability to form effective interfacial dipoles at the indium tin oxide interface to facilitate the charge extraction at the corresponding interface. Furthermore, it also consisted a core-shell structure, wherein the polar poly(NVTri) core was well protected by the poly( nBA) shell to endow improved robustness against solvent erosion and thermal/photo inputs. Consequently, the PBA70-Tri30 device yielded a decent power conversion efficiency of 8.03% with a Voc of 0.83 V, much exceeding the performance of the control device without using any EEL. Moreover, this device showed superior thermal stability/photostability. More than 80% of its initial performance was retained after being heated at 60 °C for 1000 h or exposed under continuous illumination (1 sun) for 1000 h, greatly surpassing the lifetime of the control device and the reference device using a common poly[(9,9-bis(3'-( N, N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFN) EEL. The results revealed the merit of using cross-linked BCPs in improving the long-term stability of OPVs.