Subchronic feeding, allergenicity, and genotoxicity safety evaluations of single strain bacterial protein.

Microbial proteins are potentially important alternatives to animal protein. A safety assessment was conducted on a Clostridium protein which can serve as a high-quality protein source in human food. A battery of toxicity studies was conducted comprising a 14-day dose-range finding dietary study in rats, 90-day dietary study in rats and in vitro genotoxicity studies. The allergenic potential was investigated by bioinformatics analysis. In the 90-day feeding study, rats were fed diets containing 0, 5.0, 7.5, and 10% Clostridium protein. The Clostridium protein-containing diets were well-tolerated and no adverse effects on the health or growth were observed. Significant reductions in neutrophil counts were observed in all female rats compared to controls, which were slightly outside of reference ranges. These effects were not deemed to be adverse due to the absence of comparable findings in male rats and high physiological variability of measured values within groups. A No-Observed-Adverse-Effect-Level (NOAEL) of at least 10% Clostridium protein, the highest dose tested and corresponding to 5,558 and 6,671 mg/kg body weight/day for male and female rats, respectively, was established. No evidence of genotoxicity was observed and the allergenic potential was low. These results support the use of Clostridium protein as a food ingredient.

Recent advances in single cell protein use as a feed ingredient in aquaculture.

The global demand for high-quality, protein-rich foods will continue to increase as the global population grows, along with income levels. Aquaculture is poised to help fulfill some of this demand, and is thus the fastest growing animal protein industry. A key challenge for it, though, is sourcing a sustainable, renewable protein ingredient. Single cell protein (SCP) products, protein meals based on microbial or algal biomass, have the potential to fulfill this need. Here, we review potential sources of SCP strains and their respective production processes, highlight recent advances on identification of new SCP strains and feedstocks, and, finally, review new feeding trial data on important aquaculture species, specifically Atlantic salmon, rainbow trout, and whiteleg shrimp.

Directed Evolution of Clostridium thermocellum ß-Glucosidase A Towards Enhanced Thermostability.

ß-Glucosidases are key enzymes in the process of cellulose utilization. It is the last enzyme in the cellulose hydrolysis chain, which converts cellobiose to glucose. Since cellobiose is known to have a feedback inhibitory effect on a variety of cellulases, ß-glucosidase can prevent this inhibition by hydrolyzing cellobiose to non-inhibitory glucose. While the optimal temperature of the Clostridium thermocellum cellulosome is 70 °C, C. thermocellum ß-glucosidase A is almost inactive at such high temperatures. Thus, in the current study, a random mutagenesis directed evolutionary approach was conducted to produce a thermostable mutant with Kcat and Km, similar to those of the wild-type enzyme. The resultant mutant contained two mutations, A17S and K268N, but only the former was found to affect thermostability, whereby the inflection temperature (Ti) was increased by 6.4 °C. A17 is located near the central cavity of the native enzyme. Interestingly, multiple alignments revealed that position 17 is relatively conserved, whereby alanine is replaced only by serine. Upon the addition of the thermostable mutant to the C. thermocellum secretome for subsequent hydrolysis of microcrystalline cellulose at 70 °C, a higher soluble glucose yield (243%) was obtained compared to the activity of the secretome supplemented with the wild-type enzyme.

Nanoscale Engineering of Designer Cellulosomes.

Biocatalysts showcase the upper limit obtainable for high-speed molecular processing and transformation. Efforts to engineer functionality in synthetic nanostructured materials are guided by the increasing knowledge of evolving architectures, which enable controlled molecular motion and precise molecular recognition. The cellulosome is a biological nanomachine, which, as a fundamental component of the plant-digestion machinery from bacterial cells, has a key potential role in the successful development of environmentally-friendly processes to produce biofuels and fine chemicals from the breakdown of biomass waste. Here, the progress toward so-called "designer cellulosomes", which provide an elegant alternative to enzyme cocktails for lignocellulose breakdown, is reviewed. Particular attention is paid to rational design via computational modeling coupled with nanoscale characterization and engineering tools. Remaining challenges and potential routes to industrial application are put forward.

Insights into a type III cohesin-dockerin recognition interface from the cellulose-degrading bacterium Ruminococcus flavefaciens.

Cellulosomes are large multicomponent cellulose-degrading assemblies found on the surfaces of cellulolytic microorganisms. Often containing hundreds of components, the self-assembly of cellulosomes is mediated by the ultra-high-affinity cohesin-dockerin interaction, which allows them to adopt the complex architectures necessary for degrading recalcitrant cellulose. Better understanding of how the cellulosome assembles and functions and what kinds of structures it adopts will further effort to develop industrial applications of cellulosome components, including their use in bioenergy production. Ruminococcus flavefaciens is a well-studied anaerobic cellulolytic bacteria found in the intestinal tracts of ruminants and other herbivores. Key to cellulosomal self-assembly in this bacterium is the dockerin ScaADoc, found on the non-catalytic structural subunit scaffoldin ScaA, which is responsible for assembling arrays of cellulose-degrading enzymes. This work expands on previous efforts by conducting a series of binding studies on ScaADoc constructs that contain mutations in their cohesin recognition interface, in order to identify which residues play important roles in binding. Molecular dynamics simulations were employed to gain insight into the structural basis for our findings. A specific residue pair in the first helix of ScaADoc, as well as a glutamate near the C-terminus, was identified to be essential for cohesin binding. By advancing our understanding of the cohesin binding of ScaADoc, this study serves as a foundation for future work to more fully understand the structural basis of cellulosome assembly in R. flavefaciens.

Intramolecular clasp of the cellulosomal Ruminococcus flavefaciens ScaA dockerin module confers structural stability.

The cellulosome is a large extracellular multi-enzyme complex that facilitates the efficient hydrolysis and degradation of crystalline cellulosic substrates. During the course of our studies on the cellulosome of the rumen bacterium Ruminococcus flavefaciens, we focused on the critical ScaA dockerin (ScaADoc), the unique dockerin that incorporates the primary enzyme-integrating ScaA scaffoldin into the cohesin-bearing ScaB adaptor scaffoldin. In the absence of a high-resolution structure of the ScaADoc module, we generated a computational model, and, upon its analysis, we were surprised to discover a putative stacking interaction between an N-terminal Trp and a C-terminal Pro, which we termed intramolecular clasp. In order to verify the existence of such an interaction, these residues were mutated to alanine. Circular dichroism spectroscopy, intrinsic tryptophan and ANS fluorescence, and NMR spectroscopy indicated that mutation of these residues has a destabilizing effect on the functional integrity of the Ca(2+)-bound form of ScaADoc. Analysis of recently determined dockerin structures from other species revealed the presence of other well-defined intramolecular clasps, which consist of different types of interactions between selected residues at the dockerin termini. We propose that this thematic interaction may represent a major distinctive structural feature of the dockerin module.

Structural and functional characterization of a novel type-III dockerin from Ruminococcus flavefaciens.

Phylogenetic analysis of known dockerins in Ruminococcus flavefaciens revealed a novel subtype, type-III, in the scaffoldin proteins, ScaA, ScaB, ScaC and ScaE. In this study, we explored the Ca²âº-binding properties of the type-III dockerin from the ScaA scaffoldin (ScaADoc) using a battery of structural and biophysical approaches including circular dichroism spectroscopy, isothermal titration calorimetry, differential scanning calorimetry, and nuclear magnetic resonance spectroscopy. Despite the lack of a second canonical Ca²âº-binding loop, the behaviour of ScaADoc is similar with respect to other dockerin protein modules in terms of its responsiveness to Ca²âº and affinity for the cohesin from the ScaB scaffoldin. Our results highlight the robustness of dockerin modules and how their Ca²âº-binding properties can be exploited in the construction of designer cellulosomes.

Characterization of a dockerin-based affinity tag: application for purification of a broad variety of target proteins.

Cellulose, a major component of plant matter, is degraded by a cell surface multiprotein complex called the cellulosome produced by several anaerobic bacteria. This complex coordinates the assembly of different glycoside hydrolases, via a high-affinity Ca(2+)-dependent interaction between the enzyme-borne dockerin and the scaffoldin-borne cohesin modules. In this study, we characterized a new protein affinity tag, ΔDoc, a truncated version (48 residues) of the Clostridium thermocellum Cel48S dockerin. The truncated dockerin tag has a binding affinity (K(A)) of 7.7 × 10(8)M(-1), calculated by a competitive enzyme-linked assay system. In order to examine whether the tag can be used for general application in affinity chromatography, it was fused to a range of target proteins, including Aequorea victoria green fluorescent protein (GFP), C. thermocellum ß-glucosidase, Escherichia coli thioesterase/protease I (TEP1), and the antibody-binding ZZ-domain from Staphylococcus aureus protein A. The results of this study significantly extend initial studies performed using the Geobacillus stearothermophilus xylanase T-6 as a model system. In addition, the enzymatic activity of a C. thermocellum ß-glucosidase, purified using this approach, was tested and found to be similar to that of a ß-glucosidase preparation (without the ΔDoc tag) purified using the standard His-tag. The truncated dockerin derivative functioned as an effective affinity tag through specific interaction with a cognate cohesin, and highly purified target proteins were obtained in a single step directly from crude cell extracts. The relatively inexpensive beaded cellulose-based affinity column was reusable and maintained high capacity after each cycle. This study demonstrates that deletion into the first Ca(2+)-binding loop of the dockerin module results in an efficient and robust affinity tag that can be generally applied for protein purification.

Engineering a reversible, high-affinity system for efficient protein purification based on the cohesin-dockerin interaction.

Efficient degradation of cellulose by the anaerobic thermophilic bacterium, Clostridium thermocellum, is carried out by the multi-enzyme cellulosome complex. The enzymes on the complex are attached in a calcium-dependent manner via their dockerin (Doc) module to a cohesin (Coh) module of the cellulosomal scaffoldin subunit. In this study, we have optimized the Coh-Doc interaction for the purpose of protein affinity purification. A C. thermocellum Coh module was thus fused to a carbohydrate-binding module, and the resultant fusion protein was applied directly onto beaded cellulose, thereby serving as a non-covalent "activation" procedure. A complementary Doc module was then fused to a model protein target: xylanase T-6 from Geobacillus stearothermophilus. However, the binding to the immobilized Coh was only partially reversible upon treatment with EDTA, and only negligible amounts of the target protein were eluted from the affinity column. In order to improve protein elution, a series of truncated Docs were designed in which the calcium-coordinating function was impaired without appreciably affecting high-affinity binding to Coh. A shortened Doc of only 48 residues was sufficient to function as an effective affinity tag, and highly purified target protein was achieved directly from crude cell extracts in a single step with near-quantitative recovery of the target protein. Effective EDTA-mediated elution of the sequestered protein from the column was the key step of the procedure. The affinity column was reusable and maintained very high levels of capacity upon repeated rounds of loading and elution. Reusable Coh-Doc affinity columns thus provide an efficient and attractive approach for purifying proteins in high yield by modifying the calcium-binding loop of the Doc module.

Functional asymmetry in cohesin binding belies inherent symmetry of the dockerin module: insight into cellulosome assembly revealed by systematic mutagenesis.

The cellulosome is an intricate multi-enzyme complex, known for its efficient degradation of recalcitrant cellulosic substrates. Its supramolecular architecture is determined by the high-affinity intermodular cohesin-dockerin interaction. The dockerin module comprises a calcium-binding, duplicated 'F-hand' loop-helix motif that bears striking similarity to the EF-hand loop-helix-loop motif of eukaryotic calcium-binding proteins. In the present study, we demonstrate by progressive truncation and alanine scanning of a representative type-I dockerin module from Clostridium thermocellum, that only one of the repeated motifs is critical for high-affinity cohesin binding. The results suggest that the near-symmetry in sequence and structure of the repeated elements of the dockerin is not essential to cohesin binding. The first calcium-binding loop can be deleted entirely, with almost full retention of binding. Likewise, significant deletion of the second repeated segment can be achieved, provided that its calcium-binding loop remains intact. Essentially the same conclusion was verified by systematically mutating the highly conserved residues in the calcium-binding loop. Mutations in one of the calcium-binding loops failed to disrupt cohesin recognition and binding, whereas a single mutation in both loops served to reduce the affinity significantly. The results are mutually compatible with recent crystal structures of the type-I cohesin-dockerin heterodimer, which demonstrate that the dockerin can bind in an equivalent manner to its cohesin counterpart through either its first or second repeated motif. The observed plasticity in cohesin-dockerin binding may facilitate cellulosome assembly in vivo or, alternatively, provide a conformational switch that promotes access of the tethered cellulosomal enzymes to their polysaccharide substrates.