Atomically dispersed low-valent Au boosts photocatalytic hydroxyl radical production.

Providing affordable, safe drinking water and universal sanitation poses a grand societal challenge. Here we developed atomically dispersed Au on potassium-incorporated polymeric carbon nitride material that could simultaneously boost photocatalytic generation of ·OH and H2O2 with an apparent quantum efficiency over 85% at 420 nm. Potassium introduction into the poly(heptazine imide) matrix formed strong K-N bonds and rendered Au with an oxidation number close to 0. Extensive experimental characterization and computational simulations revealed that the low-valent Au altered the materials' band structure to trap highly localized holes produced under photoexcitation. These highly localized holes could boost the 1e- water oxidation reaction to form highly oxidative ·OH and simultaneously dissociate the hydrogen atom in H2O, which greatly promoted the reduction of oxygen to H2O2. The photogenerated ·OH led to an efficiency enhancement for visible-light-response superhydrophilicity. Furthermore, photo-illumination in an onsite fixed-bed reactor could disinfect water at a rate of 66 L H2O m-2 per day.

Third harmonic generation due to free carrier in InSb using a terahertz free electron laser.

We report on the third harmonic generation (THG) in InSb semiconductor irradiated by a terahertz (THz) free electron laser (FEL). The conversion of 4 THz (wavelength 70 µm) FEL outputs into its third harmonic 12 THz was observed. We found that by tuning the sample temperature to 360 K, high conversion efficiency up to 1% can be obtained and is the highest in the THz and FIR regions below 10 THz. We also discuss the observed intensity dependence of the THG with the nonlinear order lower than 3 when the pumping intensity was high.

Design and fabrication of a microcoil metamaterial absorber for the sub-terahertz region.

The development of electromagnetic wave absorbers operating in the sub-terahertz (sub-THz) region is necessary in 6G communications. We designed and fabricated a sub-THz metamaterial absorber based on metal microcoils embedded and periodically arranged in a dielectric substrate. The microcoil parameters were optimized by calculating the electromagnetic response of the metamaterial using finite element analysis. An actual metamaterial was then fabricated based on the optimized parameters and characterized using THz time-domain spectroscopy. Our microcoil absorber exhibits an absorptance of >80% and a high shielding performance at about 250 GHz. The resonance frequency can be precisely adjusted by modifying the microcoil array dimensions.

Photocatalytic Hydrogen Evolution Activity of Nitrogen/Fluorine-Codoped Rutile TiO2.

The development of a photocatalyst capable of evolving H2 from water under visible light is important. Here, the photocatalytic activity of N/F-codoped rutile TiO2 (TiO2:N,F) for H2 evolution was examined with respect to metal cocatalyst loading and irradiation conditions. Among the metal species examined, Pd was the best-performing cocatalyst for TiO2:N,F under UV-vis irradiation (λ > 350 nm), producing H2 from an aqueous methanol solution. The H2 evolution activity was also dependent on the state of the loaded Pd species on the TiO2:N,F, which varied depending on the preparation conditions. Pd/TiO2:N,F prepared by an impregnation-H2 reduction method, showed the highest performance. However, the activity of the optimized Pd/TiO2:N,F toward H2 evolution from an aqueous methanol solution was negligibly small under visible-light irradiation (λ > 400 nm), although the use of an ethylenediaminetetraacetic acid disodium salt as an electron donor resulted in observable H2 evolution. Transient absorption spectroscopy revealed that although a relatively large population of reactive electrons was generated in the TiO2:N,F under 355 nm UV-pulse photoexcitation, the density of reactive electrons generated under 480 nm visible light was lower. This wavelength-dependent behavior in photogenerated charge carrier dynamics could explain the different photocatalytic activities of the TiO2:N,F catalysts under different irradiation conditions.

An emissive charge-transfer excited-state at the well-defined hetero-nanostructure interface of an organic conjugated molecule and two-dimensional inorganic nanosheet.

Precise engineering of excited-state interactions between an organic conjugated molecule and a two-dimensional semiconducting inorganic nanosheet, specifically the manipulation of charge-transfer excited (CTE) states, still remains a challenge for state-of-the-art photochemistry. Herein, we report a long-lived, highly emissive CTE state at structurally well-defined hetero-nanostructure interfaces of photoactive pyrene and two-dimensional MoS2 nanosheets via an N-benzylsuccinimide bridge (Py-Bn-MoS2). Spectroscopic measurements reveal that no charge-transfer state is formed in the ground state, but the locally-excited (LE) state of pyrene in Py-Bn-MoS2 efficiently generates an unusual emissive CTE state. Theoretical studies elucidate the interaction of MoS2 vacant orbitals with the pyrene LE state to form a CTE state that shows a distinct solvent dependence of the emission energy. This is the first example of organic-inorganic 2D hetero-nanostructures displaying mixed luminescence properties by an accurate design of the bridge structure, and therefore represents an important step in their applications for energy conversion and optoelectronic devices and sensors.

Carbon Nitride Loaded with an Ultrafine, Monodisperse, Metallic Platinum-Cluster Cocatalyst for the Photocatalytic Hydrogen-Evolution Reaction.

For the realization of a next-generation energy society, further improvement in the activity of water-splitting photocatalysts is essential. Platinum (Pt) is predicted to be the most effective cocatalyst for hydrogen evolution from water. However, when the number of active sites is increased by decreasing the particle size, the Pt cocatalyst is easily oxidized and thereby loses its activity. In this study, a method to load ultrafine, monodisperse, metallic Pt nanoclusters (NCs) on graphitic carbon nitride is developed, which is a promising visible-light-driven photocatalyst. In this photocatalyst, a part of the surface of the Pt NCs is protected by sulfur atoms, preventing oxidation. Consequently, the hydrogen-evolution activity per loading weight of Pt cocatalyst is significantly improved, 53 times, compared with that of a Pt-cocatalyst loaded photocatalyst by the conventional method. The developed method is also effective to enhance the overall water-splitting activity of other advanced photocatalysts such as SrTiO3 and BaLa4 Ti4 O15 .

Surface-Specific Modification of Graphitic Carbon Nitride by Plasma for Enhanced Durability and Selectivity of Photocatalytic CO2 Reduction with a Supramolecular Photocatalyst.

Photocatalytic CO2 reduction is in high demand for sustainable energy management. Hybrid photocatalysts combining semiconductors with supramolecular photocatalysts represent a powerful strategy for constructing visible-light-driven CO2 reduction systems with strong oxidation power. Here, we demonstrate the novel effects of plasma surface modification of graphitic carbon nitride (C3N4), which is an organic semiconductor, to achieve better affinity and electron transfer at the interface of a hybrid photocatalyst consisting of C3N4 and a Ru(II)-Ru(II) binuclear complex (RuRu'). This plasma treatment enabled the "surface-specific" introduction of oxygen functional groups via the formation of a carbon layer, which worked as active sites for adsorbing metal-complex molecules with methyl phosphonic-acid anchoring groups onto the plasma-modified surface of C3N4. Upon photocatalytic CO2 reduction with the hybrid under visible-light irradiation, the plasma-surface-modified C3N4 with RuRu' enhanced the durability of HCOOH production by three times compared to that achieved when using a nonmodified system. The high selectivity of HCOOH production against byproduct evolution (H2 and CO) was improved, and the turnover number of HCOOH production based on the RuRu' used reached 50 000, which is the highest among the metal-complex/semiconductor hybrid systems reported thus far. The improved activity is mainly attributed to the promotion of electron transfer from C3N4 to RuRu' under light irradiation via the accumulation of electrons trapped in deep defect sites on the plasma-modified surface of C3N4.

A general interfacial-energetics-tuning strategy for enhanced artificial photosynthesis.

The demands for cost-effective solar fuels have triggered extensive research in artificial photosynthesis, yet the efforts in designing high-performance particulate photocatalysts are largely impeded by inefficient charge separation. Because charge separation in a particulate photocatalyst is driven by asymmetric interfacial energetics between its reduction and oxidation sites, enhancing this process demands nanoscale tuning of interfacial energetics on the prerequisite of not impairing the kinetics and selectivity for surface reactions. In this study, we realize this target with a general strategy involving the application of a core/shell type cocatalyst that is demonstrated on various photocatalytic systems. The promising H2O2 generation efficiency validate our perspective on tuning interfacial energetics for enhanced charge separation and photosynthesis performance. Particularly, this strategy is highlighted on a BiVO4 system for overall H2O2 photosynthesis with a solar-to-H2O2 conversion of 0.73%.

Improvement of Visible-Light H2 Evolution Activity of Pb2 Ti2 O5.4 F1.2 Photocatalyst by Coloading of Rh and Pd Cocatalysts.

Pb2 Ti2 O5.4 F1.2 modified with various metal cocatalysts was studied as a photocatalyst for visible-light H2 evolution. Although unmodified Pb2 Ti2 O5.4 F1.2 showed negligible activity, modification of its surface with Rh led to the best observed promotional effect among the Pb2 Ti2 O5.4 F1.2 samples modified with a single metal cocatalyst. The H2 evolution activity was further enhanced by coloading with Pd; the Rh-Pd/Pb2 Ti2 O5.4 F1.2 photocatalyst showed 3.2 times greater activity than the previously reported Pt/Pb2 Ti2 O5.4 F1.2 . X-ray absorption fine-structure spectroscopy, photoelectrochemical, and transient absorption spectroscopy measurements indicated that the coloaded Rh and Pd species, which were partially alloyed on the Pb2 Ti2 O5.4 F1.2 surface, improved the electron-capturing ability, thereby explaining the high activity of the coloaded Rh-Pd/Pb2 Ti2 O5.4 F1.2 catalyst toward H2 evolution.

Manipulation of charge carrier flow in Bi4NbO8Cl nanoplate photocatalyst with metal loading.

Separation of photoexcited charge carriers in semiconductors is important for efficient solar energy conversion and yet the control strategies and underlying mechanisms are not fully established. Although layered compounds have been widely studied as photocatalysts, spatial separation between oxidation and reduction reaction sites is a challenging issue due to the parallel flow of photoexcited carriers along the layers. Here we demonstrate orthogonal carrier flow in layered Bi4NbO8Cl by depositing a Rh cocatalyst at the edges of nanoplates, resulting in spatial charge separation and significant enhancement of the photocatalytic activity. Combined experimental and theoretical studies revealed that lighter photogenerated electrons, due to a greater in-plane dispersion of the conduction band (vs. valence band), can travel along the plane and are readily trapped by the cocatalyst, whereas the remaining holes hop perpendicular to the plane because of the anisotropic crystal geometry. Our results propose manipulating carrier flow via cocatalyst deposition to achieve desirable carrier dynamics for photocatalytic reactions in layered compounds.

Identification of a Self-Photosensitizing Hydrogen Atom Transfer Organocatalyst System.

We developed organocatalyst systems to promote the cleavage of stable C-H bonds, such as formyl, α-hydroxy, and benzylic C-H bonds, through a hydrogen atom transfer (HAT) process without the use of exogenous photosensitizers. An electronically tuned thiophosphoric acid, 7,7'-OMe-TPA, was assembled with substrate or co-catalyst N-heteroaromatics through hydrogen bonding and π-π interactions to form electron donor-acceptor (EDA) complexes. Photoirradiation of the EDA complex induced stepwise, sequential single-electron transfer (SET) processes to generate a HAT-active thiyl radical. The first SET was from the electron-rich naphthyl group of 7,7'-OMe-TPA to the protonated N-heteroaromatics and the second proton-coupled SET (PCET) from the thiophosphoric acid moiety of 7,7'-OMe-TPA to the resulting naphthyl radical cation. Spectroscopic studies and theoretical calculations characterized the stepwise SET process mediated by short-lived intermediates. This organocatalytic HAT system was applied to four different carbon-hydrogen (C-H) functionalization reactions, hydroxyalkylation and alkylation of N-heteroaromatics, acceptorless dehydrogenation of alcohols, and benzylation of imines, with high functional group tolerance.

Overall photosynthesis of H2O2 by an inorganic semiconductor.

Artificial photosynthesis of H2O2 using earth-abundant water and oxygen is a promising approach to achieve scalable and cost-effective solar fuel production. Recent studies on this topic have made significant progress, yet are mainly focused on using  organic polymers. This set of photocatalysts is susceptible to potent oxidants (e.g. hydroxyl radical) that are inevitably formed during H2O2 generation. Here, we report an inorganic Mo-doped faceted BiVO4 (Mo:BiVO4) system that is resistant to radical oxidation and exhibits a high overall H2O2 photosynthesis efficiency among inorganic photocatalysts, with an apparent quantum yield of 1.2% and a solar-to-chemical conversion efficiency of 0.29% at full spectrum, as well as an apparent quantum yield of 5.8% at 420 nm. The surface-reaction kinetics and selectivity of Mo:BiVO4 were tuned by precisely loading CoOx and Pd on {110} and {010} facets, respectively. Time-resolved spectroscopic investigations of photocarriers suggest that depositing select cocatalysts on distinct facet tailored the interfacial energetics between {110} and {010} facets and enhanced charge separation in Mo:BiVO4, therefore overcoming a key challenge in developing efficient inorganic photocatalysts. The promising H2O2 generation efficiency achieved by delicate design of catalyst spatial and electronic structures sheds light on applying robust inorganic particulate photocatalysts to artificial photosynthesis of H2O2.

Surface Modifications of (ZnSe)0.5(CuGa2.5Se4.25)0.5 to Promote Photocatalytic Z-Scheme Overall Water Splitting.

Charge separation is crucial for an efficient artificial photosynthetic process, especially for narrow-bandgap metal sulfides/selenides. The present study demonstrates the application of a p-n junction to particulate metal selenides to enhance photocatalytic Z-scheme overall water splitting (OWS). The constructed p-n junction of CdS-(ZnSe)0.5(CuGa2.5Se4.25)0.5 significantly boosted charge separation. A thin TiO2 coating layer also was introduced to inhibit photocorrosion of CdS and suppress the backward reaction of water formation from hydrogen and oxygen. By employing Pt-loaded TiO2/CdS-(ZnSe)0.5(CuGa2.5Se4.25)0.5 as a hydrogen evolution photocatalyst (HEP), we assembled a Z-scheme OWS system, together with BiVO4:Mo and Au as an oxygen evolution photocatalyst and electron mediator, respectively. An apparent quantum yield of 1.5% at 420 nm was achieved, which is by far the highest among reported particulate photocatalytic Z-scheme OWS systems with metal sulfides/selenides as HEPs. The present work demonstrates that a well-tailored p-n junction structure is effective for promoting charge separation in photocatalysis and opens new pathways for the development of efficient artificial photosynthesis systems involving narrow bandgap photocatalysts.

Magnetic-Pole Flip by Millimeter Wave.

In the era of Big Data and the Internet of Things, data archiving is a key technology. From this viewpoint, magnetic recordings are drawing attention because they guarantee long-term data storage. To archive an enormous amount of data, further increase of the recording density is necessary. Herein a new magnetic recording methodology, "focused-millimeter-wave-assisted magnetic recording (F-MIMR)," is proposed. To test this methodology, magnetic films based on epsilon iron oxide nanoparticles are prepared and a focused-millimeter-wave generator is constructed using terahertz (THz) light. Irradiating the focused millimeter wave to epsilon iron oxide instantly switches its magnetic pole direction. The spin dynamics of F-MIMR are also calculated using the stochastic Landau-Lifshitz-Gilbert model considering all of the spins in an epsilon iron oxide nanoparticle. In F-MIMR, the heat-up effect of the recording media is expected to be suppressed. Thus, F-MIMR can be applied to high-density magnetic recordings.

Synthesis of Three-Layer Perovskite Oxynitride K2Ca2Ta3O9N·2H2O and Photocatalytic Activity for H2 Evolution under Visible Light.

Substitution of oxide anions (O2-) in a metal oxide for nitrogen (N3-) results in reduction of the band gap, which is attractive in heterogeneous photocatalysis; however, only a handful of two-dimensional layered perovskite oxynitrides have been reported, and thus, the structural effects of layered oxynitrides on photocatalytic activity have not been sufficiently examined. This study reports the synthesis of a Ruddlesden-Popper phase three-layer oxynitride perovskite of K2Ca2Ta3O9N·2H2O, and the photocatalytic activity is compared with an analogous two-layer perovskite, K2LaTa2O6N·1.6H2O. Topochemical ammonolysis reaction of a Dion-Jacobson phase oxide KCa2Ta3O10 at 1173 K in the presence of K2CO3 resulted in a single-phase layered perovskite, K2Ca2Ta3O9N·2H2O, which belongs to the tetragonal P4/mmm space group, as demonstrated by synchrotron X-ray diffraction, scanning transmission electron microscopy measurements, and elemental analysis. The synthesized K2Ca2Ta3O9N·2H2O has an absorption edge at around 460 nm, with an estimated band gap of ca. 2.7 eV. K2Ca2Ta3O9N·2H2O modified with a Pt cocatalyst generated H2 from an aqueous solution containing a dissolved NaI as a reversible electron donor under visible light (λ > 400 nm) with no noticeable change in the crystal structure and light absorption properties. However, the H2 evolution activity of K2Ca2Ta3O9N·2H2O was an order of magnitude lower than that of K2LaTa2O6N·1.6H2O. Femtosecond transient absorption spectroscopy revealed that the lifetime of photogenerated mobile electrons in K2Ca2Ta3O9N·2H2O was shorter than that in K2LaTa2O6N·1.6H2O, which could explain the low photocatalytic activity of K2Ca2Ta3O9N·2H2O.

Enhancement of photoelectrochemical activity of TiO2 electrode by particulate/dense double-layer formation.

Photoelectrochemical water splitting has attracted significant attention as an environment-friendly method to generate H2 and O2. Electrodes composed of powders exhibit a large surface area and are favorable for surface reactions; however, their high resistance prevents charge transportation. In contrast, photoelectrodes composed of a dense film exhibit high conductivity; however, they constitute a small surface area. Therefore, a combination of these two films can lead to higher photoelectrochemical activities. Herein, a particulate/dense TiO2 hybrid electrode exhibited eightfold and twofold higher activities for water oxidation at sufficiently positive potentials as compared to those of the single particulate and dense film electrodes, respectively. Electrochemical impedance measurements and the light intensity dependence of the photocurrent suggest that the activity enhancement is responsible for the synergistic effects of effective charge separation in the highly conductive dense TiO2 film and effective hole-consuming reaction at the particulate TiO2 layer. However, the activity rather decreased near the onset potential of water oxidation (<0.3 V) under the illumination of light near the bandgap energy (375 nm). Such an activity decrease was not observed for the 340 nm illumination; hence, the recombination of charge carriers generated in dense and particulate layers is responsible: the charge transfer resistance at the particulate/dense interface prevents the effective charge separation. These results demonstrate that the combination of particulate matter and dense films can produce a synergistic effect; however, the resistance at the junction remains a significant bottleneck, rendering resistance reduction necessary to maximize the advantages of hybrid electrodes, especially under the illumination of longer wavelength light.

Reconfiguration of magnetic domain structures of ErFeO3 by intense terahertz free electron laser pulses.

Understanding the interaction between intense terahertz (THz) electromagnetic fields and spin systems has been gaining importance in modern spintronics research as a unique pathway to realize ultrafast macroscopic magnetization control. In this work, we used intense THz pulses with pulse energies in the order of 10 mJ/pulse generated from the terahertz free electron laser (THz-FEL) to irradiate the ferromagnetic domains of ErFeO3 single crystal. It was found that the domain shape can be locally reconfigured by irradiating the THz - FEL pulses near the domain boundary. Observed domain reconfiguration mechanism can be phenomenologically understood by the combination of depinning effect and the entropic force due to local thermal gradient exerted by terahertz irradiation. Our finding opens up a new possibility of realizing thermal-spin effects at THz frequency ranges by using THz-FEL pulses.

Solar-Driven Photoelectrochemical Water Oxidation over an n-Type Lead-Titanium Oxyfluoride Anode.

Mixed-anion compounds (e.g., oxynitrides and oxysulfides) are potential candidates as photoanodes for visible-light water oxidation, but most of them suffer from oxidative degradation by photogenerated holes, leading to low stability. Here we show an exceptional example of a stable, mixed-anion water-oxidation photoanode that consists of an oxyfluoride, Pb2Ti2O5.4F1.2, having a band gap of ca. 2.4 eV. Pb2Ti2O5.4F1.2 particles, which were coated on a transparent conductive glass (FTO) support and were subject to postdeposition of a TiO2 overlayer, generated an anodic photocurrent upon band gap photoexcitation of Pb2Ti2O5.4F1.2 (λ <520 nm) with a rather negative photocurrent onset potential of ca. -0.6 V vs NHE, which was independent of the pH of the electrolyte solution. Stable photoanodic current was observed even without loading a water oxidation promoter such as CoOx. Nevertheless, loading CoOx onto the TiO2/Pb2Ti2O5.4F1.2/FTO electrode further improved the anodic photoresponse by a factor of 2-3. Under AM1.5G simulated sunlight (100 mW cm-2), stable water oxidation to form O2 was achieved using the optimized Pb2Ti2O5.4F1.2 photoanode in the presence of an applied potential smaller than 1.23 V, giving a Faradaic efficiency of 93% and almost no sign of deactivation during 4 h of operation. This study presents the first example of photoelectrochemical water splitting driven by visible-light excitation of an oxyfluoride that stably works, even without a water oxidation promoter, which is distinct from ordinary mixed-anion photoanodes that usually require a water oxidation promoter.

Terahertz emission from gold nanorods irradiated by ultrashort laser pulses of different wavelengths.

Electron photoemission and ponderomotive acceleration by surface enhanced optical fields is considered as a plausible mechanism of terahertz radiation from metallic nanostructures under ultrafast laser excitation. To verify this mechanism, we studied experimentally terahertz emission from an array of gold nanorods illuminated by intense (~10-100 GW/cm2) femtosecond pulses of different central wavelengths (600, 720, 800, and 1500 nm). We found for the first time that the order of the dependence of the terahertz fluence on the laser intensity is, unexpectedly, almost the same (~4.5-4.8) for 720, 800, and 1500 nm and somewhat higher (~6.6) for 600 nm. The results are explained by tunneling currents driven by plasmonically enhanced laser field. In particular, the pump-intensity dependence of the terahertz fluence is more consistent with terahertz emission from the sub-cycle bursts of the tunneling current rather than with the ponderomotive mechanism.

Terahertz generation measurements of multilayered GeTe-Sb2Te3 phase change materials.

Multilayered structures of GeTe and Sb2Te3 phase change material, also referred to as interfacial phase change memory (iPCM), provide superior performance for nonvolatile electrical memory technology in which the atomically controlled structure plays an important role in memory operation. Here, we report on terahertz (THz) wave generation measurements. Three- and 20-layer iPCM samples were irradiated with a femtosecond laser, and the generated THz radiation was observed. The emitted THz pulse was found to be always p polarized independent of the polarization of the excitation pulse. Based on the polarization dependence as well as the flip of the THz field from photoexcited Sb2Te3 and Bi2Te3, the THz emission process can be attributed to the surge current flow due to the built-in surface depletion layer formed in p-type semiconducting iPCM materials.