RESUMEN
The ternary compound CuV2S4 exhibits an excellent performance as anode material for sodium ion batteries with a high reversible capacity of 580 mAh g-1 at 0.7 A g-1 after 300 cycles. A Coulombic efficiency of ≈99% is achieved after the third cycle. Increase of the C-rate leads to a drop of the capacity, but a full recovery is observed after switching back to the initial C-rate. In the early stages of Na uptake first Cu+ is reduced and expelled from the electrode as nanocrystalline metallic Cu. An increase of the Na content leads to a full conversion of the material with nanocrystalline Cu particles and elemental V embedded in a Na2S matrix. The formation of Na2S is evidenced by 23Na MAS NMR spectra and X-ray powder diffraction. During the charge process the nanocrystalline Cu particles are retained, but no crystalline materials are formed. At later stages of cycling the reaction mechanism changes which is accompanied by the formation of copper(I) sulfide. The presence of nanocrystalline metallic Cu and/or Cu2S improves the electrical conductivity, leading to superior cycling and rate capability.
RESUMEN
SnP2O7 was prepared by a sol-gel route. The structural changes of tin pyrophosphate during the electrochemical lithiation were followed by using in situ XRD measurements that reveal the existence of a crystalline phase at the beginning of the discharge process. Nevertheless, it becomes amorphous after the full discharge as a result of a conversion reaction leading to the formation of LixSny alloys. The electrochemical tests show a high capacity with high retention upon cycling. To better understand the reaction mechanism of SnP2O7 with Li, several techniques were applied, such as ex situ(119)Sn Mössbauer and ex situ(7)Li and (31)P NMR spectroscopies with which we can follow the changes in the local environment of each element during cycling.