All-Arthroscopic Supraspinatus and Infraspinatus Muscle Advancement Leads to High Healing Rate and Excellent Outcomes in Patients With Massive, Retracted Rotator Cuff Tears, Even in Patients With Pseudoparalysis.

PURPOSE: To evaluate the clinical and radiographic outcomes of an all-arthroscopic rotator cuff repair technique involving muscle advancement and double-layer lasso loop (DLLL) repair for massive, retracted posterosuperior cuff tears. METHODS: This was a retrospective case series of patients with massive, retracted posterosuperior cuff tears who underwent the all-arthroscopic muscle advancement technique from March 2017 to September 2021, with a minimum follow-up of 12 months. Key steps included suprascapular nerve release, advancement of the supraspinatus and infraspinatus muscles, and DLLL repair. Preoperative and postoperative visual analog scale score for pain, American Shoulder and Elbow Surgeons (ASES) shoulder score, Constant score, University of California, Los Angeles (UCLA) shoulder score, active range of motion, and strength were compared. Preoperative and postoperative structural radiologic characteristics were analyzed. RESULTS: We evaluated 43 shoulders in 38 patients with a mean follow-up period of 18.8 months (range, 12-55 months). Of the 43 shoulders, 4 showed repair failure (9.3% retear rate). Visual analog scale, ASES, Constant, and UCLA scores significantly improved (P < .001) in patients who showed healing on postoperative magnetic resonance imaging (n = 39). ASES, Constant, and UCLA scores were significantly better in the healed group, with 100% exceeding the minimal clinically important difference for the ASES score and UCLA score and 84.2%, for Constant score. A lower proportion of patients in the retear group achieved the minimal clinically important difference. Active range of motion in all planes significantly improved for patients who had healed repairs (P < .001). Relative abduction strength, supraspinatus strength, and infraspinatus strength were at least 90% of those on the contralateral side. The recovery rate of pseudoparalysis (7 patients) was 100%. CONCLUSIONS: All-arthroscopic muscle advancement, coupled with DLLL repair, leads to a high healing rate with excellent clinical outcomes and recovery of strength to at least 90%, even in patients with pseudoparalysis. LEVEL OF EVIDENCE: Level IV, retrospective case series.

Clinical and radiographic long-term outcomes of hemiarthroplasty for complex proximal humeral fractures.

BACKGROUND: Hemiarthroplasty (HA) is a treatment option for complex proximal humeral fractures not suitable for conservative treatment or open reduction-internal fixation. Long-term outcomes using a large-metaphyseal volume prosthesis in the management of proximal humeral fractures have not been reported thus far. METHODS: Between 2006 and 2010, 41 patients with proximal humeral fractures were treated with HA at our institution (average age, 62 years; age range, 38-85 years). Nine patients underwent revision surgery, 3 were lost to follow-up, and 7 died unrelated to the index surgical procedure. Twenty-two patients were reviewed clinically and radiographically after a mean period of 10.4 years (range, 9-13 years). RESULTS: Of the 9 HA failures, 7 occurred within the first 2 postoperative years: 2 patients had infections and 5 had greater tuberosity nonunions or malunions. The other 2 patients underwent revision for rotator cuff deficiency >5 years after initial surgery. Among the patients available for final follow-up, the implant survival rate was 71% (22 of 31 patients). At final follow-up, these patients showed a mean relative Constant score of 76% (range, 49%-96%), mean active elevation of 116° (range, 60°-170°), and mean external rotation of 28° (range, 0°-55°). The majority had good or excellent internal rotation, with internal rotation to the 12th thoracic vertebra in 13 patients (59%) and to the eighth thoracic vertebra in 7 (31%). The mean Subjective Shoulder Value was 76% (range, 40%-100%). Clinical outcomes did not significantly deteriorate over a period of 10 years, except for flexion (P < .001) and internal rotation (P = .002). On analysis of greater tuberosity healing, 1 patient had a nonunion and 10 patients (45%) had a malunion, whereas the greater tuberosity had healed in an anatomic position in 12 patients (55%). Patients with a displaced malunion of the greater tuberosity did not have inferior clinical results at last follow-up. Only 2 patients showed glenoid erosion, and in no patients could stem loosening be identified at final follow-up. CONCLUSION: The revision rate following large-metaphyseal volume HA to treat a proximal humeral fracture was 29% after 10 years postoperatively, with failure within 2 years largely related to greater tuberosity nonunion or malunion and failure later related to rotator cuff insufficiency. Patients with a retained implant showed good clinical and radiographic long-term results, without relevant deterioration over time even when the greater tuberosity healed in a nonanatomic position.

Anterior deltoid muscle reflection using a deltopectoral approach is safe and does not influence outcome of reverse shoulder arthroplasty.

BACKGROUND: The deltopectoral approach is well accepted for shoulder arthroplasty procedures. The extended deltopectoral approach with detachment of the anterior deltoid from the clavicle allows increased joint exposure and can protect the anterior deltoid from traction injury. The efficacy of this extended approach has been demonstrated in anatomic total shoulder replacement surgery. However, this has not been shown in reverse shoulder arthroplasty (RSA). The primary aim of this study was to evaluate the safety of the extended deltopectoral approach in RSA. The secondary aim was to evaluate the performance of the deltoid reflection approach in terms of complications and surgical, functional, and radiologic outcomes up to 24 months after surgery. METHODS: A prospective, nonrandomized comparative study was performed between January 2012 and October 2020 including 77 patients in the deltoid reflection group and 73 patients in the comparative group. The decision for inclusion was based on patient and surgeon factors. Complications were recorded. Patients were followed up for ≥24 months to evaluate their shoulder function and undergo ultrasound evaluation. Functional outcome measures included the Oxford Shoulder Score, Disabilities of the Arm, Shoulder and Hand score, American Shoulder and Elbow Surgeons score, pain intensity (rated on visual analog scale [VAS] from 0 to 100), and range of motion (forward flexion, abduction, and external rotation). A regression analysis was performed to evaluate any factors of influence on the VAS score. RESULTS: There were no significant differences in the complication rate between the 2 groups (14.5% in deltoid reflection group and 13.8% in comparative group, P = .915). Ultrasound evaluation was available in 64 patients (83.1%), and no proximal detachment was observed. In addition, there were no significant differences in functional outcome measures both preoperatively and at 24 months after surgery between the groups assessed based on the mean VAS pain score, Oxford Shoulder Score, Disabilities of the Arm, Shoulder and Hand score, American Shoulder and Elbow Surgeons score, forward flexion, abduction, and external rotation. Adjustment for possible confounders in a regression model indicated that only prior surgery significantly influenced the VAS pain score after surgery (P = .031; 95% confidence interval, 0.574-11.67). Deltoid reflection (P = .068), age (P = .466), sex (P = .936), use of glenoid graft (P = .091), prosthesis manufacturer (P = .382), and preoperative VAS score (P = .362) were not of influence. DISCUSSION: The results of this study show that an extended deltopectoral approach for RSA is safe. Selected reflection of the anterior deltoid muscle improved exposure and prevented anterior deltoid muscle injury followed by reattachment. Patients had similar functional scores preoperatively and at 24 months postoperatively compared with a comparative group. Furthermore, ultrasound evaluation showed intact reattachments.

Biomechanical Analysis of Posterior Open-Wedge Osteotomy and Glenoid Concavity Reconstruction Using an Implant-Free, J-Shaped Iliac Crest Bone Graft.

BACKGROUND: Posterior open-wedge osteotomy and glenoid reconstruction using a J-shaped iliac crest bone graft showed promising clinical results for the treatment of posterior instability with excessive glenoid retroversion and posteroinferior glenoid deficiency. PURPOSE: To evaluate the biomechanical performance of the posterior J-shaped graft to restore glenoid retroversion and posteroinferior deficiency in a cadaveric shoulder instability model. STUDY DESIGN: Controlled laboratory study. METHODS: A posterior glenoid open-wedge osteotomy was performed in 6 fresh-frozen shoulders, allowing the glenoid retroversion to be set at 0°, 10°, and 20°. At each of these 3 preset angles of glenoid retroversion, the following conditions were simulated: (1) intact joint, (2) posterior Bankart lesion, (3) 20% posteroinferior glenoid deficiency, and (4) posterior J-shaped graft (at 0° of retroversion). With the humerus in the Jerk position (60° of glenohumeral anteflexion, 60° of internal rotation), stability was evaluated by measuring posterior humeral head (HH) translation (in mm) and peak translational force (in N) to translate the HH over 25% of the glenoid width. Glenohumeral contact patterns were measured using pressure-sensitive sensors. Fixation of the posterior J-graft was analyzed by recording graft micromovements during 3000 cycles of 5-mm anteroposterior HH translations. RESULTS: Reconstructing the glenoid with a posterior J-graft to 0° of retroversion significantly increased stability compared with a posterior Bankart lesion and posteroinferior glenoid deficiency in all 3 preset degrees of retroversion (P < .05). There was no significant difference in joint stability comparing the posterior J-graft with an intact joint at 0° of retroversion. The posterior J-graft restored mean contact area and contact pressure comparable with that of the intact condition with 0° of retroversion (222 vs 223 mm2, P = .980; and 0.450 vs 0.550 MPa, P = .203). The mean total graft displacement after 3000 cycles of loading was 43 ± 84 µm, and the mean maximal mediolateral graft bending was 508 ± 488 µm. CONCLUSION: Biomechanical analysis of the posterior J-graft demonstrated reliable restoration of initial glenohumeral joint stability, normalization of contact patterns comparable with that of an intact shoulder joint with neutral retroversion, and secure initial graft fixation in the cadaveric model. CLINICAL RELEVANCE: This study confirms that the posterior J-graft can restore stability and glenohumeral loading conditions comparable with those of an intact shoulder.

Nonoperatively managed small- to medium-sized subscapularis tendon tears: magnetic resonance imaging evaluation with a minimum of 5 years of follow-up.

BACKGROUND: Isolated or combined subscapularis (SSC) tendon tears are frequently found in patients with shoulder pain. The purpose of this study was to evaluate the structural changes associated with SSC tear in a consecutive series of patients with nonoperatively treated small size to midsize SSC tendon tears using magnetic resonance imaging (MRI). METHODS: In this retrospective case series, all patients with an isolated or combined SSC tendon tear treated nonoperatively between 1999 and 2019 were identified from our MRI and clinical databases. Twenty-one patients with a mean age of 52.6 years (range 26.6-64.8, standard deviation 9.3) with a second MRI scan at a minimum of 5 years of follow-up were enrolled. The mean follow-up was 8.6 years (range 5.6-12.6, standard deviation 1.8). Initial and last follow-up MRI scans were used to determine concomitant cuff lesions, size of the SSC tear, fatty infiltration of the SSC muscle, and biceps pathology. RESULTS: Five patients had an isolated SSC lesion; 7 patients had a concomitant tear of the supraspinatus, and 9 patients had a supraspinatus and anterior infraspinatus tendon tear. At diagnosis, 14 patients had a type 1 SSC lesion as classified by Lafosse et al, 4 patients had type 2, and 3 patients had type 3 lesions. Nineteen patients (90%) were found to have an SSC tear progression of at least one Lafosse grade (P < .001); however, no tear had progressed to an irreparable type lesion (defined as Lafosse type 5). In addition, the size of SSC tendon tears increased significantly from 75 mm2 to 228 mm2 (P < .001). At the final MRI scan, the grading of fatty infiltration increased by 1 grade in 4 cases and by 2 grades in 4 cases (P = .042). At the final follow-up, in eight patients, the condition of the long head of biceps tendon was unchanged from the initial MRI; in nine patients, there was a newly subluxated biceps tendon, and in 6 patients, there was a newly ruptured long head of biceps tendon (P < .001). CONCLUSION: After a mean of 8.6 years, almost all nonoperatively treated SSC tendon tears had increased in size, but only one-third showed additional progression of muscle fatty degeneration on MRI scan. None of the SSC lesions became irreparable during the observation period.

All-Arthroscopic Muscle Slide and Advancement Technique to Repair Massive Retracted Posterosuperior Rotator Cuff Tears.

Symptomatic massive posterosuperior rotator cuff tears without glenohumeral joint arthritis and chronic medial retraction often are deemed "irreparable." These patients often are treated with alternative joint-sparing procedures including superior capsular reconstruction or tendon transfer procedures. Open and arthroscopic-assisted muscle advancement techniques allow maximal lateral tendon mobilisation during rotator cuff repair. In this report, we present an all-arthroscopic technique of complete supraspinatus and infraspinatus muscle scapular detachment and advancement in retracted massive posterosuperior rotator cuff tears. This allows for an anatomical tendon footprint reduction and tension-free repair.

Joint-line medialization after anatomical total shoulder replacement requires more rotator cuff activity to preserve joint stability.

BACKGROUND: The biomechanical effects of joint-line medialization during shoulder surgery are poorly understood. It was therefore the purpose of this study to investigate whether medialization of the joint line especially associated with total shoulder arthroplasty leads to changes in the rotator cuff muscle forces required to stabilize the arm in space. METHODS: A validated computational 3-D rigid body simulation model was used to calculate generated muscle forces, instability ratios, muscle-tendon lengths and moment arms during scapular plane elevation. Measurements took place with the anatomical and a 2 mm and 6 mm lateralized or medialized joint line. RESULTS: When the joint line was medialized, increased deltoid muscle activity was recorded throughout glenohumeral joint elevation. The rotator cuff muscle forces increased with medialization of the joint line in the early phases of elevation. Lateralization of the joint line led to higher rotator cuff muscle forces after 52° of glenohumeral elevation and to higher absolute values in muscle activity. A maximum instability ratio of >0.6 was recorded with 6 mm of joint-line medialization. CONCLUSION: In this biomechanical study, medialization and lateralization of the normal joint line during total shoulder arthroplasty led to substantial load changes on the shoulder muscles used for stabilizing the arm in space. Specifically, medialization does not only lead to muscular shortening but also to increased load on the supraspinatus tendon during early arm elevation, the position which is already most loaded in the native joint.

Pedicled-lesser tuberosity osteotomy for glenohumeral joint exposure: a technical note and case report highlighting its use in allograft reconstruction of a large engaging reverse Hill-Sachs lesion after posterior shoulder dislocation.

Exposure of the humeral articular surface through an anterior approach to the shoulder for grafting humeral bone defects requires partial or complete detachment of the subscapularis tendon and traditionally is achieved through a subscapularis tenotomy, peel tuberosity osteotomy, or lesser tuberosity osteotomy. This case report presents a technique of performing a pedicled-lesser tuberosity osteotomy to allow adequate access for allograft reconstruction of a large reverse Hill-Sachs lesion after a traumatic posterior dislocation, to restore humeral head sphericity and prevent recurrent glenohumeral joint instability. The inferior subscapularis insertion is left intact leaving a periosteal sleeve and preserving the blood supply to the lesser tuberosity and humeral head, with the aim of improving healing of the osteotomy and preventing graft-related complications, such as resorption. Successful union of the pedicled-lesser tuberosity osteotomy and allograft was seen on a 6-month follow-upcomputed tomography scan, with adequate restoration of subscapularis function.

Osteoblast response to disordered nanotopography.

The ability to influence stem cell differentiation is highly desirable as it would help us improve clinical outcomes for patients in various aspects. Many different techniques to achieve this have previously been investigated. This concise study, however, has focused on the topography on which cells grow. Current uncemented orthopaedic implants can fail if the implant fails to bind to the surrounding bone and, typically, forms a soft tissue interface which reduces direct bone contact. Here, we look at the effect of a previously reported nanotopography that utilises nanodisorder to influence mesenchymal stromal cell (as may be found in the bone marrow) differentiation towards bone and to also exert this effect on mature osteoblasts (as may be found in the bone). As topography is a physical technique, it can be envisaged for use in a range of materials such as polymers and metals used in the manufacture of orthopaedic implants.

Supracondylar Humeral Fractures: An Audit of the Frequency of Bi-columnar Fixation and Intra-articular Wire Placement.

Introduction For supracondylar humeral (SCH) fractures, biomechanical studies suggest the most stable wire configuration achieves bi-columnar fixation. Achieving medial column fixation using lateral-entry-only wires may require an intracapsular entry point. The aim of this study was to identify the rate of bi-columnar fixation achieved in our department when treating SCH fractures with percutaneous wire fixation. A secondary aim was to identify the rate of placement of an intra-articular wire. Further aims were to examine if failure to achieve bi-columnar fixation was associated with an increased loss of fixation and whether the placement of an intra-articular wire resulted in any cases of deep infection or septic arthritis. Material and methods All Gartland type 3 supracondylar humeral fractures, June 2014 to December 2016, were retrospectively identified. Intra-operative films were reviewed to determine bi-columnar fixation and the presence/absence of an intra-articular wire. Loss of reduction requiring revision and post-operative infections were determined from the electronic patient record. Results Of 49 supracondylar fractures identified, 42 were fixed with lateral-entry only wires (24 with two wires and 18 with three wires), and seven were fixed with medial/lateral cross wires (four with one lateral wire, two with two wires, and one with three wires). Bi-columnar fixation was achieved in 41/49 cases (84%). All cases where bi-columnar fixation was not achieved were fixed with lateral-entry-only wires. One out of 49 fractures (2%) required the revision of fixation at 10 days due to loss of reduction. In this case, the initial fixation was with two lateral-entry-only wires, without bi-columnar fixation. An intra-articular wire was present in 44 out of 49 cases (90%). One out of 49 cases (2%) had a superficial wound infection. There were no cases of deep infection or septic arthritis. Conclusion In our department, the rate of bi-columnar fixation was high and, in this group, no cases required revision fixation. One of eight cases judged to not have bi-columnar fixation initially, required revision due to loss of fixation. We contend that bi-columnar fixation generally achieves a stable wire configuration even using lateral-entry-only wires for SCH fractures. The rate of intra-articular wire placement was high; however, infection rates were low with no cases of septic arthritis.

Lateral Intercondylar Ridge: Is it a reliable landmark for femoral ACL insertion?: An anatomical study.

BACKGROUND: Incorrect femoral tunnel placement is the most common cause of graft failure during Anterior Cruciate Ligament (ACL) Reconstruction. A reliable landmark can minimize errors. AIM: To identify whether the Lateral Intercondylar Ridge (LIR) is a consistent anatomical structure and define its relationship with the femoral ACL insertion. MATERIALS AND METHODS: Phase 1: we studied 23 femoral dry bone specimens macroscopically. Using a digital microscribe, the medial surface of the lateral femoral condyle was reconstructed (3D) to evaluate whether there was an identifiable bony ridge. Phase 2: 7 cadaveric specimens with intact soft tissues were dissected to identify the femoral ACL insertion. A 3D reconstruction of the femoral ACL insertion and the surface allowed us to define the relationship between the LIR and the ACL insertion. RESULTS: All specimens had a defined LIR on the medial surface of the lateral femoral condyle. The ridge was consistently located just anterior to the femoral ACL insertion. The ACL footprint was present in the depression between the ridge and the Inferior Articular Cartilage Margin (IACM). The mean distance from the midpoint of the IACM to the LIR was 10.1 mm. CONCLUSIONS: This is the first study to use the microscribe to digitally reconstruct the medial surface of the lateral femoral condyle. It shows that the LIR is a consistent anatomical structure that defines the anterior margin of the femoral ACL insertion, which guides femoral tunnel placement. Our findings support the ruler technique, which is a commonly used method for anatomic single bundle ACL reconstruction.

Femoro Patella Vialla patellofemoral arthroplasty: An independent assessment of outcomes at minimum 2-year follow-up.

AIM: To determine outcomes using the Femoro-Patella Vialla (FPV) arthroplasty and if there is an ideal patient for this implant. METHODS: A total of 41 FPV patellofemoral joint replacements were performed in 31 patients (22 females, 9 males, mean age 65 years). Mean follow-up was 3.2 years (minimum 2 years). Radiographs were reviewed preoperatively and postoperatively. We assessed whether gender, age, previous surgery, patella atla or trochlear dysplasia influenced patient satisfaction or patient functional outcome. RESULTS: The median Oxford Knee Score was 40 and the median Melbourne Patellofemoral Score was 21 postoperatively. Seventy-six percent of patients were satisfied, 10% unsure and 14% dissatisfied postoperatively. There was no radiological progression of tibiofemoral joint arthritis, using the Ahlback grading, in any patient. One patient, who was diagnosed with rheumatoid arthritis postoperatively, underwent revision to total knee replacement. There were no intraoperative lateral releases and no implant failures. Gender, age, the presence of trochlear dysplasia, patella alta or bilateral surgery did not influence patient outcome. Previous surgery did not correlate with outcome. CONCLUSION: In contrast to the current literature, the FPV shows promising early results. However, we cannot identify a subgroup of patients with superior outcomes.

Actinobacillus hominis osteomyelitis: First reported case in the English language medical literature.

INTRODUCTION: Actinobacillus hominis is currently a rarely reported pathogen. It has previously been associated with respiratory tract infections and bacteraemia in debilitated patients. However, under-reporting may occur due to misidentification by commonly used laboratory bacterial identification systems. This case is, to the best of our knowledge, the first reported case of A. hominis osteomyelitis in the English language medical literature. CASE PRESENTATION: A 37-year-old male presented with a painful foot. He had no previous foot problems, history of injury or animal contact. Osteomyelitis was confirmed by magnetic resonance imaging (MRI), and blood cultures were positive for Gram-variable bacilli. The organism was identified initially as Pasteurella pneumotropica by the local routine diagnostic laboratory and as a Pasteurella species by the UK National Reference Laboratory (Colindale, London, UK), using standard operating procedures at the time. It was finally identified as an A. hominis using 16S rRNA gene sequence analysis. Difficulties in the accurate identification of this organism remain current, as other biochemical identification systems have also resulted in misidentifications. The patient refused admission and intravenous antibiotics. He was successfully treated using an 8-week course of oral ciprofloxacin and amoxicillin based on antibiotic disc susceptibility testing resulting in clinical, serological and radiological resolution. CONCLUSION: Laboratories should maintain a high index of suspicion for A. hominis as several commonly used bacterial identification systems may not accurately identify the organism. Colonial morphology and absence of animal contact should prompt consideration of this organism in appropriate clinical situations. Oral ciprofloxacin and amoxicillin treatment was successful in this case.

Scanning electron microscopical observation of an osteoblast/osteoclast co-culture on micropatterned orthopaedic ceramics.

In biomaterial engineering, the surface of an implant can influence cell differentiation, adhesion and affinity towards the implant. On contact with an implant, bone marrow-derived mesenchymal stromal cells demonstrate differentiation towards bone forming osteoblasts, which can improve osteointegration. The process of micropatterning has been shown to improve osteointegration in polymers, but there are few reports surrounding ceramics. The purpose of this study was to establish a co-culture of bone marrow-derived mesenchymal stromal cells with osteoclast progenitor cells and to observe the response to micropatterned zirconia toughened alumina ceramics with 30 µm diameter pits. The aim was to establish whether the pits were specifically bioactive towards osteogenesis or were generally bioactive and would also stimulate osteoclastogenesis that could potentially lead to osteolysis. We demonstrate specific bioactivity of micropatterns towards osteogenesis, with more nodule formation and less osteoclastogenesis compared to planar controls. In addition, we found that that macrophage and osteoclast-like cells did not interact with the pits and formed fewer full-size osteoclast-like cells on the pitted surfaces. This may have a role when designing ceramic orthopaedic implants.

Primary arthroscopic stabilization for a first-time anterior dislocation of the shoulder. A randomized, double-blind trial.

BACKGROUND: Anterior dislocation of the glenohumeral joint in younger patients is associated with a high risk of recurrence and persistent functional deficits. The aim of this study was to assess the efficacy of a primary arthroscopic Bankart repair, while controlling for the therapeutic effects produced by the arthroscopic intervention and joint lavage. METHODS: In a single-center, double-blind clinical trial, eighty-eight adult patients under thirty-five years of age who had sustained a primary anterior glenohumeral dislocation were randomized to receive either an arthroscopic examination and joint lavage alone or together with an anatomic repair of the Bankart lesion. Assessment of the rate of recurrent instability, functional outcome (with use of three scores), range of movement, patient satisfaction, direct health-service costs, and treatment complications was completed for eighty-four of these patients (forty-two in each group) during the subsequent two years. RESULTS: In the two years after the primary dislocation, the risk of a further dislocation was reduced by 76% and the risk of all recurrent instability was reduced by 82% in the Bankart repair group compared with the group that had arthroscopy and lavage alone. The functional scores were also better (p < 0.05), the treatment costs were lower (p = 0.012), and patient satisfaction was higher (p < 0.001) after arthroscopic repair. The improved functional outcome appeared to be mediated through the prevention of instability since the functional outcome in patients with stable shoulders was similar, irrespective of the initial treatment allocation. The patients who had a Bankart repair and played contact sports were also more likely to have returned to their sport at two years (relative risk = 3.4, p = 0.007). CONCLUSIONS: Following a first-time anterior dislocation of the shoulder, there is a marked treatment benefit from primary arthroscopic repair of a Bankart lesion, which is distinct from the so-called background therapeutic effect of the arthroscopic examination and lavage of the joint. However, primary repair does not appear to confer a functional benefit to patients with a stable shoulder at two years after the dislocation.