Adolescent Internet gaming addiction and personality characteristics by game genre.

With the emergence of a new concept called 'Internet Gaming Disorder' in DSM-5 and ICD-11, related research is underway around the globe. However, not enough literature on Internet gaming addiction has considered the diversity in game genres. Internet gaming addiction may take on a different form according to the particular characteristics of a game being played. To better understand adolescent Internet gaming addiction, this study sought to identify the differences in Internet gaming addiction and personality characteristics based on the game genre played. A total of 3,217 elementary and middle school students across Korea participated in the survey that included the Maladaptive Game Use Scale and the Adolescent Personality Questionnaire. ANOVA analysis revealed that Internet gaming addiction and personality characteristics varied according to the game genre played. In particular, post-hoc tests showed that Real-Time Strategy (RTS) and First-Person Shooter (FPS) game users have higher levels of tolerance, withdrawal, and neglect of everyday life compared to other genres such as Role-Playing Game (RPG), Racing, and Arcade/Shooting. Also, Internet gamers users of particular genres showed significantly lower self-esteem (Arcade/Shooting), conscientiousness (Racing), empathy (RPG), and sense of community (Racing and RTS) scores than comparison group. The implications of the study results were discussed with a special emphasis on Internet gaming addiction interventions.

A substrateless, flexible, and water-resistant organic light-emitting diode.

Despite widespread interest, ultrathin and highly flexible light-emitting devices that can be seamlessly integrated and used for flexible displays, wearables, and as bioimplants remain elusive. Organic light-emitting diodes (OLEDs) with µm-scale thickness and exceptional flexibility have been demonstrated but show insufficient stability in air and moist environments due to a lack of suitable encapsulation barriers. Here, we demonstrate an efficient and stable OLED with a total thickness of ≈ 12 µm that can be fully immersed in water or cell nutrient media for weeks without suffering substantial degradation. The active layers of the device are embedded between conformal barriers formed by alternating layers of parylene-C and metal oxides that are deposited through a low temperature chemical vapour process. These barriers also confer stability of the OLED to repeated bending and to extensive postprocessing, e.g. via reactive gas plasmas, organic solvents, and photolithography. This unprecedented robustness opens up a wide range of novel possibilities for ultrathin OLEDs.

Fast Delayed Emission in New Pyridazine-Based Compounds.

Three novel donor-acceptor molecules comprising the underexplored pyridazine (Pydz) acceptor moiety have been synthesized and their structural, electrochemical and photophysical properties thoroughly characterized. Combining Pydz with two phenoxazine donor units linked via a phenyl bridge in a meta configuration (dPXZMePydz) leads to high reverse intersystem crossing rate k RISC = 3.9 · 106 s-1 and fast thermally activated delayed fluorescence (TADF) with <500 ns delayed emission lifetime. Efficient triplet harvesting via the TADF mechanism is demonstrated in OLEDs using dPXZMePydz as the emitter but does not occur for compounds bearing weaker donor units.

Narrowband Organic Light-Emitting Diodes for Fluorescence Microscopy and Calcium Imaging.

Fluorescence imaging is an indispensable tool in biology, with applications ranging from single-cell to whole-animal studies and with live mapping of neuronal activity currently receiving particular attention. To enable fluorescence imaging at cellular scale in freely moving animals, miniaturized microscopes and lensless imagers are developed that can be implanted in a minimally invasive fashion; but the rigidity, size, and potential toxicity of the involved light sources remain a challenge. Here, narrowband organic light-emitting diodes (OLEDs) are developed and used for fluorescence imaging of live cells and for mapping of neuronal activity in Drosophila melanogaster via genetically encoded Ca2+ indicators. In order to avoid spectral overlap with fluorescence from the sample, distributed Bragg reflectors are integrated onto the OLEDs to block their long-wavelength emission tail, which enables an image contrast comparable to conventional, much bulkier mercury light sources. As OLEDs can be fabricated on mechanically flexible substrates and structured into arrays of cell-sized pixels, this work opens a new pathway for the development of implantable light sources that enable functional imaging and sensing in freely moving animals.

Photostimulation for In Vitro Optogenetics with High-Power Blue Organic Light-Emitting Diodes.

Optogenetics, photostimulation of neural tissues rendered sensitive to light, is widely used in neuroscience to modulate the electrical excitability of neurons. For effective optical excitation of neurons, light wavelength and power density must fit with the expression levels and biophysical properties of the genetically encoded light-sensitive ion channels used to confer light sensitivity on cells-most commonly, channelrhodopsins (ChRs). As light sources, organic light-emitting diodes (OLEDs) offer attractive properties for miniaturized implantable devices for in vivo optical stimulation, but they do not yet operate routinely at the optical powers required for optogenetics. Here, OLEDs with doped charge transport layers are demonstrated that deliver blue light with good stability over millions of pulses, at powers sufficient to activate the ChR, CheRiff when expressed in cultured primary neurons, allowing live cell imaging of neural activity with the red genetically encoded calcium indicator, jRCaMP1a. Intracellular calcium responses scale with the radiant flux of OLED emission, when varied through changes in the current density, number of pulses, frequency, and pulse width delivered to the devices. The reported optimization and characterization of high-power OLEDs are foundational for the development of miniaturized OLEDs with thin-layer encapsulation on bioimplantable devices to allow single-cell activation in vivo.

Tuning charge carrier transport and optical birefringence in liquid-crystalline thin films: A new design space for organic light-emitting diodes.

Liquid-crystalline organic semiconductors exhibit unique properties that make them highly interesting for organic optoelectronic applications. Their optical and electrical anisotropies and the possibility to control the alignment of the liquid-crystalline semiconductor allow not only to optimize charge carrier transport, but to tune the optical property of organic thin-film devices as well. In this study, the molecular orientation in a liquid-crystalline semiconductor film is tuned by a novel blading process as well as by different annealing protocols. The altered alignment is verified by cross-polarized optical microscopy and spectroscopic ellipsometry. It is shown that a change in alignment of the liquid-crystalline semiconductor improves charge transport in single charge carrier devices profoundly. Comparing the current-voltage characteristics of single charge carrier devices with simulations shows an excellent agreement and from this an in-depth understanding of single charge carrier transport in two-terminal devices is obtained. Finally, p-i-n type organic light-emitting diodes (OLEDs) compatible with vacuum processing techniques used in state-of-the-art OLEDs are demonstrated employing liquid-crystalline host matrix in the emission layer.

Minority Currents in n-Doped Organic Transistors.

Doping allows us to control the majority and minority charge carrier concentration in organic field-effect transistors. However, the precise mechanism of minority charge carrier generation and transport in organic semiconductors is largely unknown. Here, the injection of minority charge carriers into n-doped organic field-effect transistors is studied. It is shown that holes can be efficiently injected into the transistor channel via Zener tunneling inside the intrinsic pentacene layer underneath the drain electrode. Moreover, it is shown that the onset of minority (hole) conduction is shifted by lightly n-doping the channel region of the transistor. This behavior can be explained by a large voltage that has to be applied to the gate in order to fully deplete the n-doped layer as well as an increase in hole trapping by inactive dopants.

Doped Organic Transistors.

Organic field-effect transistors hold the promise of enabling low-cost and flexible electronics. Following its success in organic optoelectronics, the organic doping technology is also used increasingly in organic field-effect transistors. Doping not only increases device performance, but it also provides a way to fine-control the transistor behavior, to develop new transistor concepts, and even improve the stability of organic transistors. This Review summarizes the latest progress made in the understanding of the doping technology and its application to organic transistors. It presents the most successful doping models and an overview of the wide variety of materials used as dopants. Further, the influence of doping on charge transport in the most relevant polycrystalline organic semiconductors is reviewed, and a concise overview on the influence of doping on transistor behavior and performance is given. In particular, recent progress in the understanding of contact doping and channel doping is summarized.

Contact Resistance Effects in Highly Doped Organic Electrochemical Transistors.

Injection at the source contact critically determines the behavior of depletion-type organic electrochemical transistors (OETs). The contact resistance of OETs increases exponentially with the gate voltage and strongly influences the modulation of the drain current by the gate voltage over a wide voltage range. A modified standard model accounting contact resistance can explain the particular shape of the transconductance.

Electrowetting-on-Dielectric Device Controlled by Embedded Undulating Electrode for Liquid Transport.

We demonstrated a new architecture of an electrowetting-on-dielectric (EWOD) device to transport a liquid droplet by the spatial modulation of an electric field produced using an embedded undulating electrode. The undulating electrode was constructed on an array of dielectric microstructures with different periods in region by region to generate a gradually varying lateral electric field. The contact angle of a droplet of water on the EWOD surface was found to decrease monotonically from 120 degrees to about 50 degrees with increasing the strength of the electric field. The transport of the water droplet was driven by the surface wettability gradient produced by means of the amplitude modulation of the electric field in space but not in time. Our EWOD configuration allows the flexibility in design, the simplicity in driving scheme, and the high accuracy in position for the liquid transport.

Field-symmetrization to solve luminance deviation between frames in a low-frequency-driven fringe-field switching liquid crystal cell.

The development of low-frequency-driven liquid crystal displays (LCDs) has recently received intense attention to open up low-power consumption display devices, such as portable displays, advertising panels and price tags. In fringe-field switching (FFS) LCD mode, a unidirectional electric field gives rise to head-tail symmetry breaking in liquid crystals, so that the flexoelectric effect, a coupling between the elastic distortion and the electric polarization, becomes enormously significant. The effect is thus linked to an unusual optical effect, which badly damages the quality of images by image-flickering, and this image-flickering is mainly caused by transmittance difference between the applied signal frames. Here, we intensively investigate the mechanism of the transmittance deviation, and propose an essential and promising approach to solve the poor image-quality, that is, symmetrization of electric fields between the frames. The result of our work clearly demonstrates that the field-symmetry is crucial to reduce the image-flickering, and it can be obtained by optimization of the thickness of an insulation layer with respect to the ratio of the space between electrodes to the electrode width.

Quasi-surface emission in vertical organic light-emitting transistors with network electrode.

We demonstrate a vertical-type organic light-emitting transistor (VOLET) with a network electrode of closed topology for quasi-surface emission. In our VOLET, the spatial distribution of the surface emission depends primarily on the relative scale of the aperture in the network electrode to the characteristic length for the charge carrier recombination. Due to the closed topology in the network of the source electrode, the charge transport and the resultant carrier recombination are substantially extended from individual network boundaries toward the corresponding aperture centers in the source electrode. The luminance was found to be well-controlled by the gate voltage through an organic semiconducting layer over the network source electrode.

Combinatorial color arrays based on optical micro-resonators in monolithic architecture.

We demonstrate two types of combinatorial color arrays based on the Fabry-Perot (FP) micro-resonators in monolithic architecture. Optical micro-resonators corresponding to color elements are constructed using a soluble dielectric material between two transreflective layers by transfer-printing in either a pattern-by-pattern or a pattern-on-pattern fashion. The color palette depends primarily on the thickness and the refractive index of a dielectric material embedded in the micro-resonator. A self-defined lateral gap between two adjacent color elements provides the functionality of light-blocking by the underlying background layer. A prototype of a liquid crystal display incorporated with our combinatorial color array is also demonstrated. This monolithic integration of different FP micro-resonators leads to a versatile platform to build up a new class of color arrays for a variety of visual applications including displays and coloration devices.

Biocompatible patterning of proteins on wettability gradient surface by thermo-transfer printing.

We develop a simple and biocompatible method of patterning proteins on a wettability gradient surface by thermo-transfer printing. The wettability gradient is produced on a poly(dimethylsiloxane) (PDMS)-modified glass substrate through the temperature gradient during thermo-transfer printing. The water contact angle on the PDMS-modified surface is found to gradually increase along the direction of the temperature gradient from a low to a high temperature region. Based on the wettability gradient, the gradual change in the adsorption and immobilization of proteins (cholera toxin B subunit) is achieved in a microfluidic cell with the PDMS-modified surface.