Estimating the impact of balloon guide catheter with mechanical thrombectomy for acute ischemic stroke: A U.S. cost analysis.

BACKGROUND: Balloon guide catheters (BGCs) can be used adjunctively during mechanical thrombectomy (MT) for acute ischemic stroke (AIS). Evaluating the potential economic impact associated with adjunctive BGC use is an important consideration for resource allocation. METHODS: Decision tree models were used to estimate the economic value of BGC use in MT through its impact on functional outcomes. Healthcare utilization cost estimates in the short- and long-term for patients with different 90-day mRS scores were analyzed for MT-only and MT + BGC scenarios. Deterministic (one-way) and probabilistic sensitivity analyses were performed to evaluate the robustness and uncertainty of model parameters. RESULTS: Per-patient index hospitalization cost was estimated at $65,260 for MT-only and $62,883 for MT + BGC scenarios. Per-patient one-year post-index hospitalization cost was estimated at $27,569 for MT-only and $24,830 for MT + BGC. MT + BGC had a total cost savings of $5117 compared with MT-only. Deterministic (one-way) sensitivity analysis demonstrated that cost saving per patient was most sensitive to the proportion of patients in the mRS 0-2 category in both MT + BGC and MT-only. In a probabilistic sensitivity analysis, mean per-patient costs for the index hospitalization were estimated at $63,737 for MT-only and $61,425 for MT + BGC. Mean per-patient cost estimates one-year post-index hospitalization was $27,445 for MT-only and $24,715 for MT + BGC. MT + BGC had a total cost savings of $5043 compared with MT-only. CONCLUSION: Mechanical thrombectomy with adjunctive BGC use may reduce short-term and long-term patient costs due to improved functional outcomes when compared to MT treatment alone for AIS.

Economic analysis of n-butyl cyanoacrylate compared with ethylene vinyl alcohol copolymer liquid embolic embolization of brain arteriovenous malformations (bAVMs) from a US hospital perspective.

BACKGROUND: In US hospitals, the liquid embolic systems (LESs) n-butyl cyanoacrylate (n-BCA) and ethylene vinyl alcohol copolymer (EVOH) are used for brain arteriovenous malformation (bAVM) embolization to achieve presurgical devascularization. The aim of this study was to perform an economic analysis comparing four techniques for bAVM embolization based on LES, ancillary device, and angiography suite time costs. METHODS: An economic model was developed comparing the embolization costs for n-BCA, EVOH with the plug and push technique, EVOH with detachable-tip microcatheters, and EVOH with balloon microcatheters. Per procedure costs were calculated for bAVMs with one to four pedicles. Annual cohort analyses were performed to evaluate the potential impact for low and high-volume centers. Sensitivity analyses were performed to determine cost drivers. RESULTS: The analyses showed that the n-BCA technique was the least costly of the four techniques. Total per procedure costs for one to four embolized pedicles ranged from $5941 to $10,074 for the n-BCA technique, $8428 to $30,345 for the EVOH balloon microcatheter technique, $12,711 to $47,477 for the EVOH plug and push technique, and $13,900 to $52,233 for the EVOH detachable-tip microcatheter technique. Cohort analyses costs for 52 annual cases ranged from $308,953 to $523,838 with the n-BCA technique and from $722,816 to $2,716,096 with the EVOH detachable-tip microcatheter technique. CONCLUSIONS: Procedure costs associated with n-BCA are lower than those with each of the three EVOH techniques examined. Future cost analyses should compare the costs of new LES products once available.

Real-world outcomes associated with the use of the EmboTrap revascularization device for ischemic stroke in the United States.

BACKGROUND: Mechanical thrombectomy (MT) has become the standard of care for the treatment of acute ischemic stroke (AIS). The EmboTrap revascularization device (CERENOVUS, Johnson & Johnson Medical Devices, Irvine, California, USA) has an innovative, dual layer feature designed to facilitate thrombus retrieval. OBJECTIVE: To investigate the real-world clinical and economic outcomes among patients with AIS undergoing MT using the EmboTrap device in the United States (US). METHODS: Adult patients (≥18 years) who underwent MT for AIS using the EmboTrap device between July 2018 and December 2020 were identified from the Premier Healthcare Database. Patient outcomes included discharge status (including in-hospital mortality), mean length of stay (LOS), intracranial hemorrhage (ICH), mean hospital costs, and 30-day readmissions (all-cause, cardiovascular (CV)-related, and AIS-related). RESULTS: A total of 318 patients (mean age 68.5±14.6 years) with AIS treated with the EmboTrap device as the only stent retriever used were identified. Approximately 25% of patients were discharged to home/home health organization, and the in-hospital mortality rate was 10.7%. The rate of ICH was 16.7%. Mean hospital LOS was 9.9±11.3 days, and the mean hospital costs were US$47 367±30 297. The 30-day readmission rate was 9.6% for all-causes, 5.9% for CV-related causes, and 2.6% for AIS-related causes. CONCLUSIONS: This is the first study in the US to report real-world outcomes sourced by retrospective database analysis among patients with AIS undergoing MT using the EmboTrap device. Further research is needed to better understand performance of the EmboTrap device in real-world settings.

Heterogeneity in skeletal load adaptation points to a role for modeling in the pathogenesis of osteoporotic fracture.

Genetic, environmental, or hormonal factors may cause heterogeneity in skeletal load response. Individuals with reduced sensitivity to load should require higher strains to generate an adaptive response, consequently have weaker bones and fracture more frequently. The purpose of our study was to determine if stresses (proportional to strains) at the femoral neck under equivalent loads were higher in women with a history of fractures compared with women without fractures. We studied postmenopausal women participating in the Canadian Multicentre Osteoporosis Study who had available hip structure analysis data from dual-energy X-ray absorptiometry scans (n = 2168). Women were categorized into 2 groups based on their number of self-reported fractures. We computed stress (megapascals) at the inferomedial margin of the femoral neck in a one-legged stance mode using a 2-dimensional engineering beam analysis. We used linear regression (SAS 9.3) to determine associations between stress, geometry parameters, and number of fractures. Postmenopausal women with 1 or more fractures had higher stress (2.6%), lower narrow neck bone mineral density (4.2%), cross-sectional area (3.9%), and section modulus (9.6%) than postmenopausal women without fractures (all p < 0.05). These findings provide evidence of heterogeneity in load response and suggest an important role for modeling in the pathogenesis of osteoporotic fracture.

Evidence for impaired skeletal load adaptation among Canadian women with type 2 diabetes mellitus: insight into the BMD and bone fragility paradox.

OBJECTIVE: Recent data suggest that women with type 2 diabetes mellitus (T2DM) might be more susceptible to fractures due to an impaired adaptive response to mechanical load, despite reportedly higher bone mineral density (BMD). The purpose of this study was to use an engineering beam analysis to calculate and compare the load stresses on the femurs of healthy women and women with T2DM and compare these levels to conventional measures of femoral neck BMD. MATERIALS/METHODS: We studied 3658 women who participated in the Canadian Multicentre Osteoporosis Study (CaMos), and who had available Hip Structure Analysis (HSA) data from baseline dual energy x-ray absorptiometry (DXA) scans. Women were categorized into two groups based on the presence or absence of self-reported T2DM. We computed stress in megapascals (MPa) at the infero-medial margin of the femoral neck in a one-legged stance using an engineering beam analysis incorporating dimensions and geometry from DXA scans using the HSA method. We used linear regression (SAS 9.3) to determine the association between T2DM status and stress. We also determined the association between T2DM status and femoral neck BMD. RESULTS: Stresses were 4.5% higher in T2DM women than in non-diabetics (11.03±0.18 vs. 10.56±0.04 MPa; p=0.0093). Femoral neck BMD was 4.2% greater in women with T2DM than in non-diabetics (0.74±0.002 vs. 0.71±0.01 g/cm(2); p=0.0008). CONCLUSIONS: Despite higher femoral neck BMD, higher stress indicates weaker skeletal geometry for a given load, and suggests an impaired skeletal adaptive response to load may be present in women with T2DM.

Successive binary algebraic reconstruction technique: an algorithm for reconstruction from limited angle and limited number of projections decomposed into individual components.

Relatively high radiation CT techniques are being widely used in diagnostic imaging raising the concerns about cancer risk especially for routine screening of asymptomatic populations. An important strategy for dose reduction is to reduce the number of projections, although doing so with high image quality is technically difficult. We developed an algorithm to reconstruct discrete (limited gray scale) images decomposed into individual tissue types from a small number of projections acquired over a limited view angle. The algorithm was tested using projection simulations from segmented CT scans of different cross sections including mid femur, distal femur and lower leg. It can provide high quality images from as low as 5-7 projections if the skin boundary of the cross section is used as prior information in the reconstruction process, and from 11-13 projections if the skin boundary is unknown.