Formulation and Biomedical Activity of Oil-in-Water Nanoemulsion Combining Tinospora smilacina Water Extract and Calophyllum inophyllum Seeds Oil.

Introduction: Tinospora smilacina is a native plant used in traditional medicine by First Nations peoples in Australia to treat inflammation. In our previous study, an optimised Calophyllum inophyllum seed oil (CSO) nanoemulsion (NE) showed improved biomedical activities such as antimicrobial, antioxidant activity, cell viability and in vitro wound healing efficacy compared to CSO. Methods: In this study, a stable NE formulation combining T. smilacina water extract (TSWE) and CSO in a nanoemulsion (CTNE) was prepared to integrate the bioactive compounds in both native plants and improve wound healing efficacy. D-optimal mixture design was used to optimise the physicochemical characteristics of the CTNE, including droplet size and polydispersity index (PDI). Cell viability and in vitro wound healing studies were done in the presence of CTNE, TSWE and CSO against a clone of baby hamster kidney fibroblasts (BHK-21 cell clone BSR-T7/5). Results: The optimised CTNE had a 24 ± 5 nm particle size and 0.21± 0.02 PDI value and was stable after four weeks each at 4 °C and room temperature. According to the results, incorporating TSWE into CTNE improved its antioxidant activity, cell viability, and ability to promote wound healing. The study also revealed that TSWE has >6% higher antioxidant activity than CSO. While CTNE did not significantly impact mammalian cell viability, it exhibited wound-healing properties in the BSR cell line during in vitro testing. These findings suggest that adding TSWE may enhance CTNE's potential as a wound-healing treatment. Conclusion: This is the first study demonstrating NE formulation in which two different plant extracts were used in the aqueous and oil phases with improved biomedical activities.

Optimisation of Calophyllum inophyllum seed oil nanoemulsion as a potential wound healing agent.

BACKGROUND: Efficient delivery systems of Calophyllum inophyllum seed oil (CSO) in the form of nanoemulsion were optimised to enhance its stability and ensure its therapeutic efficiency as a potential agent for various biomedical applications. METHOD: Response Surface Methodology (RSM) was used to determine the effects of independent variables (oil, surfactant, water percentage and homogenisation time) on physicochemical characteristics, including droplet size, polydispersity index and turbidity. RESULTS: The optimised CSO nanoemulsion (CSONE) has a 46.68 nm particle size, 0.15 Polydispersity index value and 1.16 turbidity. After 4 weeks of storage at 5 ± 1 °C and 25 ± 1 °C, the CSONE was physically stable. The optimised CSO nanoemulsion showed enhancement in cell viability and wound healing in baby hamster kidney a clone BHK-21 (BSR) cells as compared to the CSO. The wound healing property of CSONE was higher than CSO. CONCLUSION: Thus, our in vitro wound healing results demonstrated that CSO in the nanoemulsion form can promote wound healing by enhancing the proliferation and migration of epidermal cells. The coarse emulsion of Calophyllum inophyllum seed oil nano emulsion was prepared using high shear homogeniser techniques. The optimised CSONE with the droplet size of 46.68 nm was prepared from a mixture of CSO, Tween 80, and high pure water (HPW), then used for the biological investigation. The in vitro cell monolayer scratch assay revealed that CSONE in the lowest concentration of CSO resulted in 100% wound closure after 48 hrs. The optimised CSO nanoemulsion was found to be a promising and effective approach in the treatment of wounds by boosting the proliferation and migration of epidermal cells.

Gold nanoparticle-assisted enhancement in bioactive properties of Australian native plant extracts, Tasmannia lanceolata and Backhousia citriodora.

Green nanotechnology plays a significant role in developing effective treatment strategies for numerous diseases. The biological synthesis of metal nanoparticles (M-NPs) possesses suitable alternatives than chemical techniques. Using plant extract to synthesis M-NPs is an eco-friendly, non-toxic, and cost-effective that are suitable for biological applications and efforts are directed to explore the efficacy of these materials in cancer management. In this study, gold nanoparticles (Au-NPs) were synthesised by following a one-step green synthesis, a reaction between HAuCl4 and biological molecules present in Tasmannia lanceolata leaf extract as a sole agent for both reduction and stabilisation. The characterisation techniques confirmed the successful synthesis of Au-NPs. TEM photograph revealed spherical shape nanoparticles with an average size of 7.10 ± 0.66 nm. The in-vitro cytotoxicity of Au-NPs was performed by analysing the percentage inhibition of cell viability using Resazurin assay on human liver cancer (HepG2), melanoma cancer (MM418 C1) and breast cancer (MCF-7) cell lines and compared with Au-NPs synthesised by using Backhousia citriodora leaf extract. The results showed that biosynthesised Au-NPs displayed greater inhibitory activity towards MCF-7 cancer cells proliferation compared to HepG2 and MM418 cancer cells. In addition, synthesised Au-NPs@ Tasmannia lanceolata leaf extract indicated higher inhibitory activity towards cancer cells compared to Au-NPs@ Backhousia citriodora leaf extract.

Ultrasmall superparamagnetic Fe3O4 nanoparticles: honey-based green and facile synthesis and in vitro viability assay.

INTRODUCTION: In the present research, we report a quick and green synthesis of magnetite nanoparticles (Fe3O4-NPs) in aqueous solution using ferric and ferrous chloride, with different percentages of natural honey (0.5%, 1.0%, 3.0% and 5.0% w/v) as the precursors, stabilizer, reducing and capping agent, respectively. The effect of the stabilizer on the magnetic properties and size of Fe3O4-NPs was also studied. METHODS: The nanoparticles were characterized by X-ray diffraction (XRD) analysis, field emission scanning electron microscopy, energy dispersive X-ray fluorescence, transmission electron microscopy (TEM), vibrating sample magnetometry (VSM) and Fourier transform infrared spectroscopy. RESULTS: The XRD analysis indicated the presence of pure Fe3O4-NPs while the TEM images indicated that the Fe3O4-NPs are spherical with a diameter range between 3.21 and 2.22 nm. The VSM study demonstrated that the magnetic properties were enhanced with the decrease in the percentage of honey. In vitro viability evaluation of Fe3O4-NPs performed by using the MTT assay on the WEHI164 cells demonstrated no significant toxicity in higher concentration up to 140.0 ppm, which allows them to be used in some biological applications such as drug delivery. CONCLUSION: The presented synthesis method can be used for the controlled synthesis of Fe3O4-NPs, which could be found to be important in applications in biotechnology, biosensor and biomedicine, magnetic resonance imaging and catalysis.

Advancements in electrochemical DNA sensor for detection of human papilloma virus - A review.

Human papillomavirus (HPV) is one of the most common sexually transmitted disease, transmitted through intimate skin contact or mucosal membrane. The HPV virus consists of a double-stranded circular DNA and the role of HPV virus in cervical cancer has been studied extensively. Thus it is critical to develop rapid identification method for early detection of the virus. A portable biosensing device could give rapid and reliable results for the identification and quantitative determination of the virus. The fabrication of electrochemical biosensors is one of the current techniques utilized to achieve this aim. In such electrochemical biosensors, a single-strand DNA is immobilized onto an electrically conducting surface and the changes in electrical parameters due to the hybridization on the electrode surface are measured. This review covers the recent developments in electrochemical DNA biosensors for the detection of HPV virus. Due to the several advantages of electrochemical DNA biosensors, their applications have witnessed an increased interest and research focus nowadays.

Rapid adsorption of copper(II) and lead(II) by rice straw/Fe3O4 nanocomposite: optimization, equilibrium isotherms, and adsorption kinetics study.

Rice straw/magnetic nanocomposites (RS/Fe3O4-NCs) were prepared via co-precipitation method for removal of Pb(II) and Cu(II) from aqueous solutions. Response surface methodology (RSM) was utilized to find the optimum conditions for removal of ions. The effects of three independent variables including initial ion concentration, removal time, and adsorbent dosage were investigated on the maximum adsorption of Pb (II) and Cu (II). The optimum conditions for the adsorption of Pb(II) and Cu(II) were obtained (100 and 60 mg/L) of initial ion concentration, (41.96 and 59.35 s) of removal time and 0.13 g of adsorbent for both ions, respectively. The maximum removal efficiencies of Pb(II) and Cu(II) were obtained 96.25% and 75.54%, respectively. In the equilibrium isotherm study, the adsorption data fitted well with the Langmuir isotherm model. The adsorption kinetics was best depicted by the pseudo-second order model. Desorption experiments showed adsorbent can be reused successfully for three adsorption-desorption cycles.

Studies on properties of rice straw/polymer nanocomposites based on polycaprolactone and Fe3O4 nanoparticles and evaluation of antibacterial activity.

Modified rice straw/Fe3O4/polycaprolactone nanocomposites (ORS/Fe3O4/ PCL-NCs) have been prepared for the first time using a solution casting method. The RS/Fe3O4-NCs were modified with octadecylamine (ODA) as an organic modifier. The prepared NCs were characterized by using X-ray powder diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FT-IR). The XRD results showed that as the intensity of the peaks decreased with the increase of ORS/Fe3O4-NCs content in comparison with PCL peaks, the Fe3O4-NPs peaks increased from 1.0 to 60.0 wt. %. The TEM and SEM results showed a good dispersion of ORS/Fe3O4-NCs in the PCL matrix and the spherical shape of the NPs. The TGA analysis indicated thermal stability of ORS/Fe3O4-NCs increased after incorporation with PCL but the thermal stability of ORS/Fe3O4/PCL-NCs decreased with the increase of ORS/Fe3O4-NCs content. Tensile strength was improved with the addition of 5.0 wt. % of ORS/Fe3O4-NCs. The antibacterial activities of the ORS/Fe3O4/PCL-NC films were examined against Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) by diffusion method using nutrient agar. The results indicated that ORS/Fe3O4/PCL-NC films possessed a strong antibacterial activity with the increase in the percentage of ORS/Fe3O4-NCs in the PCL.

Rapid adsorption of heavy metals by Fe3O4/talc nanocomposite and optimization study using response surface methodology.

Fe3O4/talc nanocomposite was used for removal of Cu(II), Ni(II), and Pb(II) ions from aqueous solutions. Experiments were designed by response surface methodology (RSM) and a quadratic model was used to predict the variables. The adsorption parameters such as adsorbent dosage, removal time, and initial ion concentration were used as the independent variables and their effects on heavy metal ion removal were investigated. Analysis of variance was incorporated to judge the adequacy of the models. Optimal conditions with initial heavy metal ion concentration of 100, 92 and 270 mg/L, 120 s of removal time and 0.12 g of adsorbent amount resulted in 72.15%, 50.23%, and 91.35% removal efficiency for Cu(II), Ni(II), and Pb(II), respectively. The predictions of the model were in good agreement with experimental results and the Fe3O4/talc nanocomposite was successfully used to remove heavy metals from aqueous solutions.

Synthesis and characterization of rice straw/Fe3O4 nanocomposites by a quick precipitation method.

Small sized magnetite iron oxide nanoparticles (Fe3O4-NPs) with were successfully synthesized on the surface of rice straw using the quick precipitation method in the absence of any heat treatment. Ferric chloride (FeCl3·6H2O), ferrous chloride (FeCl2·4H2O), sodium hydroxide (NaOH) and urea (CH4N2O) were used as Fe3O4-NPs precursors, reducing agent and stabilizer, respectively. The rice straw fibers were dispersed in deionized water, and then urea was added to the suspension, after that ferric and ferrous chloride were added to this mixture and stirred. After the absorption of iron ions on the surface layer of the fibers, the ions were reduced with NaOH by a quick precipitation method. The reaction was carried out under N2 gas. The mean diameter and standard deviation of metal oxide NPs synthesized in rice straw/Fe3O4 nanocomposites (NCs) were 9.93 ± 2.42 nm. The prepared rice straw/Fe3O4-NCS were characterized using powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray fluorescence (EDXF) and Fourier transforms infrared spectroscopy (FT‒IR). The rice straw/Fe3O4-NCs prepared by this method have magnetic properties.

Synthesis of talc/Fe3O4 magnetic nanocomposites using chemical co-precipitation method.

The aim of this research was to synthesize and develop a new method for the preparation of iron oxide (Fe(3)O(4)) nanoparticles on talc layers using an environmentally friendly process. The Fe(3)O(4) magnetic nanoparticles were synthesized using the chemical co-precipitation method on the exterior surface layer of talc mineral as a solid substrate. Ferric chloride, ferrous chloride, and sodium hydroxide were used as the Fe(3)O(4) precursor and reducing agent in talc. The talc was suspended in deionized water, and then ferrous and ferric ions were added to this solution and stirred. After the absorption of ions on the exterior surface of talc layers, the ions were reduced with sodium hydroxide. The reaction was carried out under a nonoxidizing oxygen-free environment. There were not many changes in the interlamellar space limits (d-spacing = 0.94-0.93 nm); therefore, Fe(3)O(4) nanoparticles formed on the exterior surface of talc, with an average size of 1.95-2.59 nm in diameter. Nanoparticles were characterized using different methods, including powder X-ray diffraction, transmission electron microscopy, emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy. These talc/Fe(3)O(4) nanocomposites may have potential applications in the chemical and biological industries.