RESUMEN
Light-driven magnetic MXene-based microrobots (MXeBOTs) have been developed as an active motile platform for efficiently removing and degrading bisphenol A (BPA). Light-driven MXeBOTs are facilitated with the second control engine, i.e., embedded Fe2 O3 nanoparticles (NPs) for magnetic propulsion. The grafted bismuth NPs act as cocatalysts. The effect of the BPA concentration and the chemical composition of the swimming environment on the stability and reusability of the MXeBOTs are studied. The MAXBOTs, a developed motile water remediation platform, demonstrate the ability to remove/degrade approximately 60% of BPA within just 10 min and achieve near-complete removal/degradation (≈100%) within 1 h. Above 86% of BPA is mineralized within 1 h. The photocatalytic degradation of BPA using Bi/Fe/MXeBOTs demonstrates a significant advantage in the mineralization of BPA to CO2 and H2 O.
RESUMEN
Two-dimensional nanomaterials, as one of the most widely used substrates for energy storage devices, have achieved great success in terms of the overall capacity. Despite the extensive research effort dedicated to this field, there are still major challenges concerning capacitance modulation and stability of the 2D materials that need to be overcome. Doping of the crystal structures, pillaring methods and 3D structuring of electrodes have been proposed to improve the material properties. However, these strategies are usually accompanied by a significant increase in the cost of the entire material preparation process and also a lack of the versatility for modification of the various types of the chemical structures. Hence in this work, versatile, cheap, and environmentally friendly method for the enhancement of the electrochemical parameter of various MXene-based supercapacitors (Ti3 C2 , Nb2 C, and V2 C), coated with functional and charged organic molecules (zwitterions-ZW) is introduced. The MXene-organic hybrid strategy significantly increases the ionic absorption (capacitance boost) and also forms a passivation layer on the oxidation-prone surface of the MXene through the covalent bonds. Therefore, this work demonstrates a new, cost-effective, and versatile approach (MXene-organic hybrid strategy) for the design and fabrication of hybrid MXene-base electrode materials for energy storage/conversion systems.
RESUMEN
Biohybrid micro- and nanorobots are integrated tiny machines from biological components and artificial components. They can possess the advantages of onboard actuation, sensing, control, and implementation of multiple medical tasks such as targeted drug delivery, single-cell manipulation, and cell microsurgery. This review paper is to give an overview of biohybrid micro- and nanorobots for smart drug delivery applications. First, a wide range of biohybrid micro- and nanorobots comprising different biological components are reviewed in detail. Subsequently, the applications of biohybrid micro- and nanorobots for active drug delivery are introduced to demonstrate how such biohybrid micro- and nanorobots are being exploited in the field of medicine and healthcare. Lastly, key challenges to be overcome are discussed to pave the way for the clinical translation and application of the biohybrid micro- and nanorobots.
RESUMEN
Micro/nano biomimetic systems that convert energy from the surroundings into mechanical motion have emerged as promising tools to enhance the efficiencies of different biomedical and environmental processes. The inclusion of multiple engines into the same device has become a promising strategy to achieve dual/triple stimuli responses. Such hybrid micro/nanoswimmers combining different propulsion forces exhibit advanced motion behaviors and different physical features that are interesting not only to achieve strong propulsion capabilities in complex environments but also to modulate their movement according to the intended use. The development of hybrid systems that can be actuated by both light and biocompatible fuels is of particular interest. This minireview covers the main types of photoactive/biocatalytic micro/nanoswimmers developed so far. Their main photoresponsive and enzymatic components are discussed along with the most representative designs. The applicability of such hybrid machines for analyte sensing, antibacterial and therapeutical uses is also described. The remaining challenges and opportunities are then explored.
Asunto(s)
BiocatálisisRESUMEN
Electrochemical reduction of carbon dioxide (ERCO2 ) is an attractive and sustainable approach to close the carbon loop. Formic acid is a high-value and readily collectible liquid product. However, the current reaction selectivity remains unsatisfactory. In this study, the bismuth-containing metal-organic framework CAU-17, with morphological variants of hexagonal prisms (CAU-17-hp) and nanofibers (CAU-17-fiber), is prepared at room temperature through a wet-chemical approach and employed as the electrocatalyst for highly selective CO2 -to-formate conversion. An H3 BTC-mediated morphology reconstruction is systematically investigated and further used to build a CAU-17-fiber hierarchical structure. The as-prepared CAU-17-fiber_400 electrodes give the best electrocatalytic performance in selective and efficient formate production with FEHCOO- of 96.4 % and jCOOH- of 20.4â mA cm-2 at -0.9â VRHE . This work provides a new mild approach for synthesis and morphology engineering of CAU-17 and demonstrates the efficacy of morphology engineering in regulating the accessible surface area and promoting the activity of MOF-based materials for ERCO2 .
RESUMEN
Milli/micro/nanorobots are considered smart devices able to convert energy taken from different sources into mechanical movement and accomplish the appointed tasks. Future advances and realization of these tiny devices are mostly limited by the narrow window of material choices, the fuel requirement, multistep surface functionalization, rational structural design, and propulsion ability in complex environments. All these aspects call for intensive improvements that may speed up the real application of such miniaturized robots. 3D-printed graphene-based smartdust robots provided with a magnetic response and filled with aluminum/gallium molten alloy (Al/Ga) for autonomous motion are presented. These robots can swim by reacting with the surrounding environment without adding any fuel. Because their outer surface is coated with a hydrogel/photocatalyst (chitosan/carbon nitride, C3 N4 ) layer, these robots are used for the photocatalytic degradation of the picric acid as an explosive model molecule under visible light. The results show a fast and efficient degradation of picric acid that is attributed to a synergistic effect between the adsorption capability of the chitosan and the photocatalytic activity of C3 N4 particles. This work provides added insight into the large-scale fabrication, easy functionalization, and propulsion of tiny robots for environmental applications.
RESUMEN
Self-propelled autonomous nano/microswimmers are at the forefront of materials science. These swimmers are expected to operate in highly confined environments, such as between the grains of soil or in the capillaries of the human organism. To date, little attention is paid to the problem that in such a confined environment the fuel powering catalytic nano/microswimmers can be exhausted quickly and the space can be polluted with the product of the catalytic reaction. In addition, the motion of the nano/microswimmers may be influenced by the confinement. These issues are addressed here, showing the influence of the size of the capillary and length of the micromotor on the motion and the influence of the depletion of the fuel and excess of the exhaust products. Theoretical modeling is provided as well to bring further insight into the observations. This article shows challenges that these systems face and stimulates research to overcome them.
RESUMEN
Self-propelled micro- and nanomachines are at the forefront of materials research, branching into applications in biomedical science and environmental remediation. Cationic frameworks enabling the collection and delivery of anionic species (A-) are highly required, due to the large variety of life-threatening pollutants, such as radioactive technetium and carcinogenic chromium, and medicines, such as dexamethasone derivatives with negative charges. However, such autonomous moving carriers for active transport of the anions have been barely discussed. A polymeric viologen (PV++)-consisting of electroactive bicationic subunits-is utilized in a tubular autonomous microswimmer to selectively deliver A- of different sizes and charge densities. The cargo loading is based on a facile anion exchange mechanism. The packed crystal structure of PV++ allows removal of an exceptionally high quantity of anions per one microswimmer (2.55 × 10-13 mol anions per microswimmer), a critical factor often neglected regarding the real-world application of microswimmers. Notably, there was virtually no leakage of anions during the delivery process or upon keeping the loaded microswimmers under ambient conditions for at least 4 months. Multiple release mechanisms, compatible with different environments, including electrochemical, photochemical, and a metathesis reaction, with high efficiencies up to 98% are introduced. Such functional autonomous micromachines provide great promise for the next generation of functional materials for biomedical and environmental applications.
Asunto(s)
Cromo/análisis , Dexametasona/análisis , Níquel/química , Platino (Metal)/química , Polímeros/química , Tecnecio/análisis , Viológenos/química , Aniones/análisis , Técnicas Electroquímicas , Estructura Molecular , Tamaño de la Partícula , Tecnicas de Microbalanza del Cristal de Cuarzo , Propiedades de SuperficieRESUMEN
Micromachines are at the forefront of materials research as they are self-propelled, smart autonomous systems capable of acting as an intelligent matter. One of the obstacles the field faces is tracking individual micromachines carrying molecular cargo from the rest of the micromachines. Highly stable fluorescent markers based on chemically modified 2D germanene compounds are developed. Two different 2D germanene derivatives, 4-fluorophenylgermanane (2D-Ph-Ge) and methylgermanane (2D-Me-Ge), exhibit different fluorescence under UV light irradiation (excitation at 365 nm), which allows one particular micromotor to be easily distinguished in a mixture of micromotors. This offers a paradigm shift toward a new approach of multiplex detection of self-propelled micromachines. The utility is demonstrated on a drug delivery system, where micromachines carrying a drug are labeled with 2D-Ph-Ge with blue emission while bare micromachines are labeled by 2D-Me-Ge with red emission. This approach of functional fluorescent labeling will pave the way to multiple simultaneous functionalized micromachines identification in complex environments.
RESUMEN
An electroadsorption technique similar to the ultrafast charging mechanism in supercapacitors is utilized to remove metals with different sizes and hydrophilicities from contaminated water using self-propelled microswimmers. The swimmers carry graphite fibre or bismuth with a layered crystal structure providing high electrostatic double-layer capacitances. Unlike previous methods, this electrochemical technique does not only utilize the surface of the swimmers, but due to the interlayer spacing of the graphite and bismuth, it is able to store metals in ≈400 layers, allowing removal and recovery of >50â ppm lithium in only 5â min. A larger interlayer distance between bismuth sheets allows the removal of bigger cations (sodium and calcium), expanding the application of this method to a large variety of natural elements. Finally, magnetic navigation of charged swimmers to an oxygen-saturated media causes oxidation and thus immediate release of the metal ions from the swimmers.
RESUMEN
It has been more than a decade since nano/micromachines (NMMs) have received the particular attention of scientists in different research fields. They are able to convert chemical energy into mechanical motion in their surrounding environment. Herein, a powerful, efficient and fast strategy of using nanosized reduced graphene oxide flake (n-rGO)-based self-propelled tubular micromachines for the removal of nitroaromatic compounds (NACs) is described. This method relies on the integration of the rGO as a well-known adsorbent of aromatic compounds with chemically powered engines for the removal of explosive compounds such as 2,4,6-trinitrotoluene (TNT), 2,4,6-trinitrophenol (TNP) and 2,4-dinitrotoluene (DNT). Nanographene oxide reduced electrochemically inside the pores of the polycarbonate membrane to form an outer layer (n-rGO, adsorbent layer) of the micromachines. Subsequent electrodeposition of nickel (Ni, magnetic layer) and platinum (Pt, catalytic layer) resulted in the formation of n-rGO/Ni/Pt micromachines. Notably, the bubble-propelled micromachines were able to remove nitroaromatic compounds with high efficiency (â¼90-92%) compared to the efficiency of magnetic-guided (22-42%) and static (2.5-7%) micromachines. Most importantly, the micromachines were regenerated and reused several times. The regeneration is based on an electrochemical method in which electron injection into the machine causes the expulsion of contaminants from the outer layer of the micromachines within a few seconds. The integration of the powerful self-propulsion, high adsorbent capacity of rGO and the introduced ultrafast regeneration procedure are beneficial for the realization of an active platform for water remediation.
RESUMEN
Self-propelled microrobots are seen as the next step of micro- and nanotechnology. The biomedical and environmental applications of these robots in the real world need their motion in the confined environments, such as in veins or spaces between the grains of soil. Here, self-propelled trilayer microrobots have been prepared using electrodeposition techniques, coupling unique properties of green bismuth (Bi) with a layered crystal structure, magnetic nickel (Ni), and a catalytic platinum (Pt) layer. These Bi-based microrobots are investigated as active self-propelled platforms that can load, transfer, and release both doxorubicin (DOX), as a widely used anticancer drug, and arsenic (As) and chromium (Cr), as hazardous heavy metals. The significantly high loading capability for such variable cargoes is due to the high surface area provided by the rhombohedral layered crystal structure of bismuth, as well as the defects introduced through the oxide layer formed on the surface of bismuth. The drug release is based on an ultrafast electroreductive mechanism in which the electron injection into microrobots and consequently into the loaded objects causes an electrostatic repulsion between them and thus an ultrafast release of the loaded cargos. Remarkably, we have presented magnetic control of the Bi-based microrobots inside a microfluidic system equipped with an electrochemical setup as a proof-of-concept to demonstrate (i) heavy metals/DOX loading, (ii) a targeted transport system, (iii) the on-demand release mechanism, and (iv) the recovery of the robots for further usage.
Asunto(s)
Antineoplásicos/química , Bismuto/química , Doxorrubicina/química , Neoplasias/tratamiento farmacológico , Antineoplásicos/uso terapéutico , Bismuto/toxicidad , Cromo/química , Cromo/toxicidad , Espacios Confinados , Liberación de Fármacos , Humanos , Metales Pesados/química , Metales Pesados/toxicidad , Nanotecnología/tendencias , Neoplasias/patología , Platino (Metal)/química , Platino (Metal)/toxicidadRESUMEN
Synthetic nano/micro/millimeter-sized machines that harvest energy from the surrounding environment and then convert it to motion have had a significant impact on many research areas such as biology (sensing, imaging, and therapy) and environmental applications. Autonomous motion is a key element of these devices. A high surface area is preferable as it leads to increased propellant or cargo-loading capability. Integrating highly ordered and porous metal-organic frameworks (MOFs) with self-propelled machines is demonstrated to have a significant impact on the field of nano/micro/millimeter-sized devices for a wide range of applications. MOFs have shown great potential in many research fields due to their tailorable pore size. These fields include energy storage and conversion; catalysis, biomedical application (e.g., drug delivery, imaging, and cancer therapy), and environmental remediation. The marriage of motors and MOFs may provide opportunities for many new applications for synthetic nano/micro/millimeter-sized machines. Herein, MOF-based micro- and nanomachines are reviewed with a focus on the specific properties of MOFs.
RESUMEN
Autonomous self-propelled nano and microrobots are in the forefront of materials research. The micromachines are typically prepared in batches, stored and subsequently used. We show here that the storage of platinum tubular catalytic microrobots in water causes their corrosion which results in their lower mobility and performance. This has important implications for the construction and storage of these autonomous micromotors.
RESUMEN
The determination of mercury simultaneously with other elements via inductively coupled plasma-mass spectrometry (ICP-MS) in airborne particulate matter (PM2.5) is still challenging due to the lack of accuracy for the low level mercury concentrations as a result of its volatility and tendency to adhere to the walls of the sample introduction system. This study investigated the effect of existing (gold and methionine) and new (lithium tetrathiafulvalene carboxylate (LiCTTF)) preservation agents in order to improve the determination of trace mercury in PM2.5 samples. Statistical analysis revealed that a concentration of 10 µg mL-1 of LiCTTF was sufficient to obtain highly accurate results with t values of 0.1044-1.1239 which are considerably less than the critical t value of 1.8 and apparent recoveries of 85-100%. An evaluation of the method revealed a spiked mercury recovery of 91% and a detection limit of 0.05 ng mL-1. The method was tested for the determination of trace metals in PM2.5 from atmospheric samples and led to the detection of low elemental concentrations in Singapore's atmosphere. The mechanism for the interaction of mercury with LiCTTF and tetrathiafulvalene (TTF) was studied by conducting in situ electrochemical studies. Cyclic voltammetry and square-wave voltammetry analyses of mercury, and mercury in presence of LiCTTF and TTF revealed complexation between the metal and sulfur-containing compounds.
RESUMEN
This study investigates platinum group elements (PGEs) in the breathable (PM10) and respirable (PM2.5) fractions of air particulates from a heavily polluted Indian metro city. The samples were collected from traffic junctions at the heart of the city and industrial sites in the suburbs during winter and monsoon seasons of 2013-2014. PGE concentrations were determined by inductively coupled plasma-mass spectrometry (ICP-MS). The PGE concentrations in the samples from traffic junctions are within the range of 2.7-111 ng/m(3) for Pd, 0.86-12.3 ng/m(3) for Pt and 0.09-3.13 ng/m(3) for Rh, and from industrial sites are within the range of 3.12-32.3 ng/m(3) for Pd, 0.73-7.39 ng/m(3) for Pt and 0.1-0.69 ng/m(3) for Rh. Pt concentrations were lower in the monsoon compared to winter while Pd concentrations increased during monsoon and Rh stayed relatively unaffected across seasons. For all seasons and locations, concentrations of Pd > Pt > Rh, indicating dominance of Pd-containing exhaust converters. Most of the PGEs were concentrated in the PM2.5 fraction. A strong correlation (R ≥ 0.62) between the PGEs from traffic junction indicates a common emission source viz. catalytic converters, whereas a moderate to weak correlation (R ≤ 0.5) from the industrial sites indicate mixing of different sources like coal, raw materials used in the factories and automobile. A wider range of Pt/Pd, Pt/Rh and Pd/Rh ratios measured in the traffic junction possibly hint towards varying proportions of PGEs used for catalyst productions in numerous rising and established car brands.
RESUMEN
Graphene materials have found applications in a wide range of devices over the past decade. In order to meet the demand for graphene materials, various synthesis methods are constantly being improved or invented. Ball-milling of graphite to obtain graphene materials is one of the many versatile methods to easily obtain bulk quantities. In this work, we show that the graphene materials produced by ball-milling are spontaneously contaminated with metallic impurities originating from the grinding bowls and balls. Ball-milled sulfur-doped graphene materials obtained from two types of ball-milling apparatus, specifically made up of stainless steel and zirconium dioxide, were investigated. Zirconium dioxide-based ball-milled sulfur-doped graphene materials contain a drastically lower amount of metallic impurities than stainless steel-based ball-milled sulfur-doped graphene materials. The presence of metallic impurities is demonstrated by their catalytic effects toward the electrochemical catalysis of hydrazine and cumene hydroperoxide. The general impression toward ball-milling of graphite as a versatile method for the bulk production of 'metal-free' graphene materials without the need for post-processing and the selection of ball-milling tools should be cautioned. These findings would have wide-reaching implications for graphene research.
RESUMEN
A highly active alternative to Pt electrocatalysts for the oxygen reduction reaction (ORR), which is the cathode-electrode reaction of fuel cells, is sought for higher fuel-cell performance. Our theoretical modelling reveals that B-doped Pd (Pd-B) weakens the absorption of ORR intermediates with nearly optimal binding energy by lowering the barrier associated with O2 dissociation, suggesting Pd-B should be highly active for ORR. In fact, Pd-B, facile synthesized by an electroless deposition process, exhibits 2.2â times and 8.8â times higher specific activity and 14â times and 35â times less costly than commercial pure Pd and Pt catalysts, respectively. Another computational result is that the surface core level of Pd is negatively shifted by B doping, as confirmed by XPS, and implies that filling the density of states related to the anti-bonding of oxygen to Pd surfaces with excess electrons from B doping, weakens the O bonding to Pd and boosts the catalytic activity.
RESUMEN
A highly active Pd-P nanoparticle electrocatalyst for formic acid oxidation was synthesized using NaH2PO2 as the reducing agent. The Pd-P nanoparticles were amorphous and exhibited higher specific and mass activity values compared to commercial Pd/C electrocatalyts and reported literature values. Furthermore, the Pd-P nanoparticles were found to be more durable than Pd/C electrocatalyts.
RESUMEN
High nuclearity carbonyl clusters of ruthenium and osmium are found to exhibit good photoacoustic (PA) activity in the near-IR (NIR) region. Their potential as PA contrast agents for full body imaging has been demonstrated for the first time with mice; intravenous administration of the osmium carbonyl cluster Na2[Os10(µ6-C)(CO)24] afforded up to a four-fold enhancement of the PA signal in various tissues. The cluster exhibits low toxicity, high stability and superior PA stability compared to the clinically approved NIR dye, indocyanine green.