Chitosan-based emulgel and xerogel film containing Thymus pubescens essential oil as a potential wound dressing.

Controlling the wound exudates accompanied by microbial wound infections has still remained as one the most challenging clinical issues. Herein, a chitosan/gelatin/polyvinyl alcohol xerogel film containing Thymus pubescens essential oil is fabricated for antimicrobial wound dressing application. The chemical and physical characteristics of the devised formulation is characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscope, and tensile tests. Moreover, swelling capability, water vapour transmission rate, water contact angle, solubility, moisture content, and release properties are also studied. The antimicrobial and antibiofilm tests are performed using the broth microdilution and XTT assay, respectively. The produced formulation shows excellent antimicrobial efficacy against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Candida species. It is also demonstrated that the obtained film can reduce (∼80 %) Candida albicans biofilm formation, and its biocompatibility is confirmed with MTT (∼100 %) and hemolysis tests. The antimicrobial activity can be correlated to the microbial membrane attraction for Candida albicans cells, illustrated by flow cytometry. This proposed film with appropriate mechanical strength, high swelling capacity in different pH values (∼200-700 %), controlled release property, and antimicrobial and antioxidant activities as well as biocompatibility can be used as a promising candidate for antimicrobial wound dressing applications.

Effect of MBF-20 Interlayer on the Microstructure and Corrosion Behaviour of Inconel 625 Super Alloy after Diffusion Brazing.

The joining zone includes three main parts, which comprise an isothermal solidification zone (ISZ), the athermal solidification zone (ASZ), and a diffusion affected zone (DAZ). Field emission scanning electron microscopy (FESEM) was used here to observe the microstructure equipped with ultra-thin window energy dispersive X-ray spectrometer (EDS) system. Additionally, electrochemical impedance spectroscopy (EIS) and cyclic potentiodynamic polarization tests were conducted to evaluate the effect of the DB process on the corrosion resistance of the Inconel 625 superalloy. In the bonding time period, some Mo- and Cr-rich boride precipitations and Ni-rich γ-solid solution phases with hardened alloy elements, such as Mo and Cr, formed in DAZ and ASZ, respectively, because of the inter-diffusion of melting point depressants (MPD). Moreover, during cooling cycles, Ni-Cr-B, Ni-Mo-B, Ni-Si-B, and Ni-Si phase compounds were formed in the ASZ area at 1110-850 °C. The DAZ area developed by borides compound with cubic, needle, and grain boundary morphologies. The corrosion tests indicated that the DB process led to a reduction in the passive region and increased the sensitivity to pitting corrosion.

Encapsulation of Zataria multiflora essential oil in polyvinyl alcohol/chitosan/gelatin thermo-responsive hydrogel: Synthesis, physico-chemical properties, and biological investigations.

Zataria multiflora essential oil is a natural volatile plant product whose therapeutic applications require a delivery platform. Biomaterial-based hydrogels have been extensively used in biomedical applications, and they are promising platforms to encapsulate essential oils. Among different hydrogels, intelligent hydrogels have recently attracted many interests because of their response to environmental stimuli such as temperature. Herein, Zataria multiflora essential oil is encapsulated in a polyvinyl alcohol/chitosan/gelatin hydrogel as a positive thermo-responsive and antifungal platform. According to the optical microscopic image, the encapsulated spherical essential oil droplets reveal a mean size of 1.10 ± 0.64 µm, which are in consistent with the SEM imaging results. Encapsulation efficacy and loading capacity are 98.66 % and 12.98 %, respectively. These results confirm the successful efficient encapsulation of the Zataria multiflora essential oil within the hydrogel. The chemical compositions of the Zataria multiflora essential oil and the fabricated hydrogel are analyzed by gas chromatography-mass spectroscopy (GC-MS) and Fourier transform infrared (FTIR) techniques. It is found that thymol (44.30 %) and γ-terpinene (22.62 %) are the main constituents of the Zataria multiflora essential oil. The produced hydrogel inhibits the metabolic activity of Candida albicans biofilms (∼60-80 %), which can be related to the antifungal activity of the essential oil constituents and chitosan. Based on the rheological results, the produced thermo-responsive hydrogel shows a gel-sol viscoelastic transition at a temperature of 24.5 °C. This transition leads to a facile release of the loaded essential oil. The release test depicts that about 30 % of Zataria multiflora essential oil is released during the first 16 min. In addition, 2, 5-diphenyl-2H-tetrazolium bromide (MTT) assay demonstrates that the designed thermo-sensitive formulation is biocompatible with high cell viability (over 96 %). The fabricated hydrogel can be deemed as a potential intelligent drug delivery platform for controlling cutaneous candidiasis due to antifungal effectiveness and less toxicity, which can be a promising alternative to traditional drug delivery systems.

Characterization of the produced electrospun fish gelatin nanofiber containing fucoxanthin.

This study aims to prepare fish gelatin nanofibers extracted from fish waste by using electrospinning method and its encapsulation with fucoxanthin extracted from macroalgae Sargassum angustifolium. Four concentrations of gelatin and two concentrations of fucoxanthin were used under different voltage for preparing the nanofibers. The optimal conditions for producing the nanofibers were considered as 30%, 10 cm, 12 kV, and 5% for fish gelatin concentration, distance, voltage, and fucoxanthin, respectively. The average thickness of nanofibers was estimated 198 ± 0.073 nm. The FTIR results confirmed the presence of functional groups between fucoxanthin and gelatin. The loading efficiency of fucoxanthin in nanofibers and the free radical scavenging of DPPH were calculated 91% and 62%, respectively. Further, these nanofibers showed the antibacterial properties against bacteria. Based on the results, the fish gelatin nanofibers containing fucoxanthin can be proposed as a suitable coating for using in the food packaging industry.

Magnetic chitosan nanoparticles loaded with Amphotericin B: Synthesis, properties and potentiation of antifungal activity against common human pathogenic fungal strains.

Amphotericin B has long been regarded as the gold standard for treating invasive fungal infections despite its toxic potential. The main objective of this research was to develop a novel IONPs@CS-AmB formulation in a cost-effective manner in order to enhance AmB delivery performance, with lowering the drug's dose and adverse effects. The chitosan-coated iron oxide nanoparticles (IONPs@CS) were synthesized afterward, AmB-loaded IONPs@CS (IONPs@CS-AmB) prepared and characterized by AFM, FT-IR, SEM, EDX, and XRD. Biological activity of the synthesized NPs determined and the cytotoxicity of IONPs@CS-AmB evaluated using the MTT and in vitro hemolysis tests. The IONPs@CS-AmB was synthesized using the coprecipitation method with core-shell structure in size range of 27.70 to ∼70 nm. The FT-IR, XRD and EDX pattern confirmed the successful synthesis of IONPs @CS-AmB. The IONPs@CS-AmB exhibited significant antifungal activity and inhibited the metabolic activity of Candida albicans biofilms. The hemolysis and MTT assays showed that IONPs@CS-AmB is biocompatible with high cell viability when compared to plain AmB and fungizone. The IONPs@CS-AmB is more effective, less toxic and may be a suitable alternative to conventional drug delivery. IONPs@CS-AmB may be a viable candidate for use as a microbial-resistant coating on the surfaces of biomedical devices.

Kinetic Study on Nannochloropsis Oculata's Lipid Extraction Using Supercritical CO2 and n-Hexane for Biodiesel Production.

Biodiesel as a renewable fuel has attracted increasing attention in recent years. Microalgae biomass is becoming an attractive raw material for producing biodiesel using supercritical CO2 (SC-CO2) as a safe and environmentally friendly technique with high efficiency for lipid extraction. In this study, the lipid of Nannochloropsis oculata was extracted under different conditions of SC-CO2 to assess the kinetics of supercritical fluid extraction. The effective parameters on lipid extraction, including temperature, pressure, and the existence of n-hexane as a co-solvent, were investigated. The results show that an increase in temperature at low or high pressures causes the kinetic constant of lipid extraction to decrease or increase, respectively. Also, an increase in pressure causes the kinetic constant of lipid extraction to increase at low or high temperatures. The most yield and the most kinetic constant value during extraction with pure CO2 are about 0.262 [g extracted lipid/g microalgal biomass] and 0.062 min-1, respectively, at the highest pressure and temperature (i.e., 550 bar and 75 °C). Using SC-CO2 laced with n-hexane increases both the final yield and the rate of lipid extraction. Also, it improves the quality of the biodiesel fuel through the extraction of unsaturated fatty acids with a concentration of almost two times more than saturated fatty acids. Additionally, results reveal that the effect of adding n-hexane to CO2 in lipid extraction would be more efficient by increasing the temperature and lowering the pressure.

Fabrication of amphotericin B-loaded electrospun core-shell nanofibers as a novel dressing for superficial mycoses and cutaneous leishmaniasis.

Amphotericin B (AmB) is an antifungal and antiparasitic agent that is the main drug used for the treatment of mycoses infections and leishmaniasis. However, its high toxicity and side effects are the main difficulties attributed to its application. In this study, to minimize its harmful effects, AmB-loaded core-shell nanofibers were fabricated, using polyvinyl alcohol, chitosan, and AmB as the core, and polyethylene oxide and gelatin as the shell-forming components. The nanofibers were characterized, using scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, tensile test, drug release, and MTT assay. The results showed that the prepared nanofibers were smooth and had a core-shell structure with almost no cytotoxicity against fibroblast cells and the release study suggested that the core-shell structure decreased the burst release. The disk diffusion assay revealed that the nanofibrous mats at different AmB concentrations exhibited significant activity against all the eight evaluated fungal species with the inhibition zones of 1.4-2.6 cm. The flow cytometry assay also showed that the prepared nanofibrous mat significantly killed Leishmania major promastigotes up to 84%. The obtained results indicated that this AmB-loaded nanofibrous system could be a suitable candidate for a topical drug delivery system for the treatment of both superficial mycoses and cutaneous leishmaniasis.

Dissolvable carboxymethyl cellulose/polyvinylpyrrolidone microneedle arrays for transdermal delivery of Amphotericin B to treat cutaneous leishmaniasis.

Cutaneous leishmaniasis (CL) is a significant public health problem caused by different species of Leishmania parasites. Due to low skin permeability, the development of an effective system for delivery of Amphotericin B (AMB), the common effective drug for leishmaniasis treatment, is required to replace the unpleasant and problematic injections. To overcome this problem, a dissolvable microneedle (MN) patch was developed, using biodegradable polymers (a mixture of polyvinylpyrrolidone and carboxymethyl cellulose) for AMB's transdermal delivery. Scanning electron microscopy and fluorescent images showed successful fabrication of the MNs and homogeneous dispersion of the drug into the needles. MNs showed good mechanical properties with the ability to penetrate the rat skin and reach the lower layers. After insertion to the skin, the MNs were rapidly dissolved to release the encapsulated drug, and the resulted micropores in the skin were quickly resealed within 30 min. MN patches showed non-toxicity as exposed to HT-29 cell line. Flow cytometry results showed a potent in vitro leishmanicidal activity of AMB-loaded MN patches against the Leishmania parasites (up to 86% of the parasites' death). Taken together, MN patches might represent a new, efficient and clinically translational approach for transdermal AMB delivery to treat CL.

Antimicrobial core-shell electrospun nanofibers containing Ajwain essential oil for accelerating infected wound healing.

Treatment of skin injuries is still facing major challenges, such as chronicity and infections, particularly those caused by multi-drug resistance pathogens. An effective treatment of such wounds should accelerate the wound healing process while preventing bacterial contamination. Here, a novel core-shell nanofiber mat was fabricated comprising gelatin/polyvinyl alcohol (as a core) and aloe vera/arabinose/polyvinylpyrrolidone (as a shell) for accelerating the healing process of bacteria-infected wounds. Trachyspermum Ammi (Ajwain) essential oil (EO), as a potent and natural antimicrobial agent against microorganisms, was incorporated into the core of nanofiber mats using coaxial electrospinning. The microscopy images demonstrated the successful fabrication of the core-shell structure with a uniform fiber size of 564 ± 106.35 nm. Moreover, Ajwain EO-loaded nanofiber mat (core-shell/EO) provided excellent antimicrobial activity and antioxidant ability. The in vitro and ex vivo release of Ajwain EO from the fabricated nanofiber mat corroborated a prolonged release profile. Furthermore, in vivo antibacterial activity, wound closure, and histomorphological examinations showed the high efficacy of the core-shell/EO mat in the treatment of Staphylococcus aureus-infected full-thickness rat wounds compared to standard control treatment with a gauze. Overall, these results represent the core-shell/EO mat's potential as a newly developed wound dressing for bacteria-infected full-thickness skin injuries.

Dual drug delivery of vancomycin and imipenem/cilastatin by coaxial nanofibers for treatment of diabetic foot ulcer infections.

Diabetic foot ulcer infections are the main causes of hospitalization in diabetics. The present study aimed to develop vancomycin and imipenem/cilastatin loaded core-shell nanofibers to facilitate the treatment of diabetic foot ulcers. Therefore, novel core-shell nanofibers composed of polyethylene oxide, chitosan, and vancomycin in shell and polyvinylpyrrolidone, gelatin, and imipenem/cilastatin in core compartments were prepared using the electrospinning technique. The nanofibers were characterized using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, tensile test, and drug release. The antibacterial activity of drug-loaded nanofibers in different drugs concentrations was evaluated against Methicillin-resistant Staphylococcus aureus (MRSA), Escherichia coli, and Pseudomonas aeruginosa by disk diffusion method. Furthermore, the cytotoxicity of fibers was investigated by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide assay. The obtained results showed that the prepared nanofibers were smooth having a core-shell structure with almost no cytotoxicity. The nanofibrous mats exhibited significant antibacterial activity against S. aureus and MRSA with the inhibition zones of 2.9 and 2.5 cm and gram-negative bacteria species of E. coli and P. aeruginosa with the inhibition zones of 1.9 and 2.8 cm, respectively. With respect to the significant antibacterial activities of these nanofibrous mats, they might be used as suitable drug delivery devices not only for diabetic foot ulcer infections but also for other chronic wounds.

Preparation of multilayer electrospun nanofibrous scaffolds containing soluble eggshell membrane as potential dermal substitute.

Electrospinning of natural and synthetic polymers has shown to be a great candidate for the fabrication of tissue engineering scaffolds due to their similarity to the nanofibrous structure of natural extracellular matrix (ECM). Moreover, the addition of ECM-like proteins could enhance the biocompatibility of these scaffolds. In this study, soluble eggshell protein (SEP) was first extracted and synthesized from the raw eggshell membrane. The characteristics and biocompatibility of the extracted SEP were evaluated using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) analysis and 3-(4,5- dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide) (MTT) assay. For scaffolds fabrication, a three-layer nanofibrous composite structure was produced using the electrospinning technique. The outer layers composed of polyvinyl alcohol, chitosan, and extracted SEP while the middle layer composed of polyethylene oxide, gelatin, and zinc oxide nanoparticles (ZnO-NPs). For each layer, the electrospinning parameters were adjusted to form bead-free fibers. To improve fibers' stability against body fluids, the produced fibers were crosslinked using glutaraldehyde vapor. Several techniques such as scanning electron microscopy (SEM), energy dispersive X-ray, ATR-FTIR, swelling, tensile test, in vitro biodegradation, and MTT assay were implemented to evaluate the physical, chemical, and biological characterization of the fabricated fibers. The results showed that crosslinked fibers have adequate stability in water, suitable mechanical properties, and promising water uptake capacity. The MTT results also revealed that SEP and ZnO-NPs could increase scaffolds biocompatibility. Moreover, SEM photographs of cultured fibroblasts cells on the scaffolds showed that cells were well attached on the scaffolds and preserve their natural spindle shapes. Altogether, our findings demonstrated that the produced three-layer composite scaffolds are potential candidates for skin tissue engineering.

Core-shell chitosan/PVA-based nanofibrous scaffolds loaded with Satureja mutica or Oliveria decumbens essential oils as enhanced antimicrobial wound dressing.

Wounds are prone to bacterial infections, which cause a delayed healing process. Regarding the emergence of bacterial resistance to common antibiotics, using natural antimicrobial agents can be beneficial. Chitosan is a biological polymer, which has shown partial antioxidant and antimicrobial activities. In this study, core-shell nanofibrous scaffolds composed of chitosan (CS)/polyvinyl alcohol (PVA) as the core and polyvinylpyrrolidone (PVP)/ maltodextrin (MD) as the shell were developed. Satureja mutica (S. mutica) or Oliveria decumbens (O. decumbens) essential oil (EO) was encapsulated into the core of the produced scaffolds. The broth microdilution analysis showed significant antimicrobial activity of the EOs. The SEM analysis indicated that the unloaded and loaded core-shell scaffolds with S. mutica or O. decumbens EO had a uniform, beadless structure with fiber mean diameters of 210 ± 50, 250 ± 45, and 225 ± 46 nm, respectively. The CS/PVA-PVP/MD and CS/PVA/EO-PVP/MD scaffolds indicated suitable mechanical properties. The addition of the studied EOs enhanced the antioxidant activity of the scaffolds. The antimicrobial test of produced scaffolds showed that loading of 10% S. mutica or O. decumbens EO could broaden the microbicidal activity of the CS/PVA-PVP/MD scaffolds. These results revealed that the CS/PVA/EO-PVP/MD nanofibrous scaffolds are promising candidates for wound dressing.

Fabrication and characterization of conductive polypyrrole/chitosan/collagen electrospun nanofiber scaffold for tissue engineering application.

Conductive electrospun nanofiber scaffold containing conductive polypyrrole (PPy) polymer was fabricated to accelerate healing of damaged tissues. In order to prepare these scaffolds, various weight percentages of polypyrrole (5, 10, 15, 20, 25%) relative to the polymers combination (chitosan, collagen, and polyethylene oxide) were used. The fabricated composite scaffolds were characterized using chemical, morphological, physio-mechanical, and biological analyses including; FTIR spectroscopy, SEM, electrical conductivity, tensile test, in vitro degradation, MTT Assay and cell culture. The polypyrrole particles were perfectly dispersed inside the nanofibers, and the fibers average diameter were reducing by increasing the polypyrrole content in the composites. The presence of polypyrrole in fibers enhanced their conductivity up to 164.274 × 10-3 s/m which is in the range of semi-conductive and conductive polymers. MTT and SEM analyses displayed that nanofibers composing 10% polypyrrole possess better cell adhesion, growth and proliferation properties comparing to other compositions. Furthermore, the suitable mechanical properties of scaffolds ideally fitted them for different kinds of tissue applications including skin, nerve, heart muscle, etc. Therefore, these fabricated conductive nanofiber scaffolds are particularly appropriate for employing in body parts with electrical signals such as cardiovascular, heart muscles, or nerves.

Glucantime-loaded electrospun core-shell nanofibers composed of poly(ethylene oxide)/gelatin-poly(vinyl alcohol)/chitosan as dressing for cutaneous leishmaniasis.

Leishmaniasis, one of the main concerns of the World Health Organization, is a parasitic disease caused by Leishmania species. The main objective of this study was to prepare a topical drug delivery system that can deliver glucantime to the site of cutaneous Leishmania wounds. Using the electrospinning method, a core-shell nanofibrous mat composed of macromolecules including polyethylene oxide, gelatin, poly (vinyl alcohol) and chitosan was prepared. The prepared nanofibers were characterized by scanning electron microscopy (SEM), transmission electron microscopy, Fourier transform infrared spectroscopy (FT-IR), tensile test and in vitro drug release test. The anti-Leishmania activities of drug-loaded nanofibers against Leishmania promastigotes and its cytotoxicity on fibroblasts were determined respectively by flow-cytometry and indirect MTT methods. Results of morphological studies showed that uniform nanofibers were prepared without any bead with average diameter of 404 nm. The TEM investigation confirmed the core-shell structure of the fibers. The in-vitro drug release assay was executed using Franz diffusion cell, which indicted 84% of glucantime was released during the first 9 h. The results indicated that 4 and 6 cm2 of nanofibers mat were significantly killed promatigotes up to 78%. Moreover, the MTT assay also showed that the fabricated nanofibers do not possess any cytotoxicity towards fibroblast cells.

Vascularization strategies for skin tissue engineering.

A number of challenges in skin grafting for wound healing have drawn researchers to focus on skin tissue engineering as an alternative solution. The core idea of tissue engineering is to use scaffolds, cells, and/or bioactive molecules to help the skin to properly recover from injuries. Over the past decades, the field has significantly evolved, developing various strategies to accelerate and improve skin regeneration. However, there are still several concerns that should be addressed. Among these limitations, vascularization is known as a critical challenge that needs thorough consideration. Delayed wound healing of large defects results in an insufficient vascular network and ultimately ischemia. Recent advances in the field of tissue engineering paved the way to improve vascularization of skin substitutes. Broadly, these solutions can be classified into two categories as (1) use of growth factors, reactive oxygen species-inducing nanoparticles, and stem cells to promote angiogenesis, and (2) in vitro or in vivo prevascularization of skin grafts. This review summarizes the state-of-the-art approaches, their limitations, and highlights the latest advances in therapeutic vascularization strategies for skin tissue engineering.

The Using Virtual Computer-Assisted Planning in Orthognathic Surgery: A Systematic Review and Meta-Analysis

Abstract Objective: To use virtual computer-assisted planning in orthognathic surgeries through meta-analysis and systematic review. Material and Methods: This search took place between 2010 and 2019. The databases searched in this domain included MEDLINE, PubMed, Cochrane Library, Embase, ISI, and Google scholar. Accordingly, the abstracts of the articles were initially reviewed and the ones that had the most coordination with the study objectives were selected. Then, the full texts of the articles were examined; and finally, five studies were selected. In addition to reviewing the related literature, the results were extracted and entered into the meta-analyzer Stata V.14 to summarize the final results. Results: The sample size in this study was at a range from 6 to 28 patients and a total number of 85 patients had participated in the given investigations. As well, CT and CBCT were selected as imaging methods. Clinical imaging and analysis were also employed in computer-assisted planning in all five studies. Subsequently, surgical planning was performed and the virtual splint was designed while the planning time was 225 minutes and 145 minutes in two studies. Conclusion: The present results supported computer-assisted planning and the quality of scientific evidence.

The Comparison of Different Irrigation Systems to Remove Calcium Hydroxide from the Root Canal: A Systematic Review and Meta-Analysis

Abstract Objective: To examine the effect of a variety of irrigation systems on the removal of root canal Ca (OH)2 residues through meta-analysis and systematic review. Material and Methods: A search of relevant articles was systematically performed on databases of Medline, PubMed, Cochrane Library, Embase, ISI, and Google Scholar published from 2013 to 2019. Electronic title management was carried out by EndNote X9 software. Searches were based on the main keywords of "Irrigation Systems", "Calcium Hydroxide"," Root Canal", "Self-adjusting File OR SAF", "Conventional Irrigation", "EndoVac System", "Ultrasonic Irrigation" and "YAG Laser". Results: The studies investigated were found to lack any standardization concerning the irrigation method used or the measurement of outcomes; for instance, different studies used 5 or 10 mL of 2.5% NaOCl, or 5 mL of 5.25% NaOCl, or 0.5 mL, 3 mL and 10 mL of 17% EDTA. Conclusion: The effective techniques for the removal of root canal Ca(OH)2 were PUI, and SAF approaches.

Development of nanofibrous collagen-grafted poly (vinyl alcohol)/gelatin/alginate scaffolds as potential skin substitute.

The main objective of this work is to fabricate a nanofibrous scaffold to regenerate skin tissue. A scaffold composed of poly (vinyl alcohol)/gelatin/alginate was prepared using electrospinning method. To improve scaffold biocompatibility and wound healing properties, collagen, extracted from rat tail, was grafted on as-prepared nanofibers. The prepared scaffolds were characterized by SEM, FTIR, swelling ratio test, and water vapor transmission rate (WVTR) measurement. Cytotoxicity of the scaffolds against human fibroblasts and L929 (NCBI C161) cells were tested using direct and indirect methods, respectively. Fibroblast cell adhesion and proliferation on the scaffold were also investigated. Results of morphological studies showed that beadless nanofibers with 229 nm diameter were prepared. ATR-FTIR spectra of collagen grafted nanofiber mats confirmed presence of the collagen on their surface. Collagen grafted nanofibers showed higher swelling ratio than nanofibers without collagen graft. Collagen grafting decreased VWTR. Collagen grafting decreased both tensile strength and Young's modulus of the nanofibrous scaffolds while increased their elongation at break. MTT results showed that both scaffolds are biocompatible with higher cell viability for nanofibers with collagen grafting. Fibroblast cell culture on the scaffolds demonstrated that both of scaffolds have good cell viability and proliferation while collagen grafted scaffold showed better results.

Evaluation of electrospun poly (vinyl alcohol)-based nanofiber mats incorporated with Zataria multiflora essential oil as potential wound dressing.

Infections, especially those caused by multi-drug resistant pathogens, result in serious problems in wound healing process. In this study, Zataria multiflora (ZM) essential oil, as a strong natural antimicrobial agent, is incorporated into poly (vinyl alcohol)-based nanofiber mats to fabricate a novel wound dressing. Different amounts of ZM essential oil (0, 2, 5 and 10% (v/v)) were incorporated into chitosan/poly(vinyl alcohol)/gelatin (CS/PVA/Gel) solutions and then were successfully electrospun into beadless and uniform fibers with 95 ±â€¯14, 154 ±â€¯27, 187 ±â€¯40 and 218 ±â€¯58 nm in diameters, respectively. The produced nanofiber mats (CS/PVA/Gel/ZM) were chemically crosslinked by glutaraldehyde vapor. The chemical compositions of ZM essential oil and nanofiber mats were analyzed using Gas Chromatography-Mass Spectrometry (GC-MS) and Fourier Transform Infrared Spectroscopy (FTIR), respectively. The antimicrobial activity of the CS/PVA/Gel/ZM nanofiber mats was determined by the AATCC100 method. The nanofiber mat loaded with 10% of ZM essential oil completely inhibited the growth of Staphylococcus aureus, Pseudomonas aeruginosa and Candida albicans after 24 h of incubation. Swelling investigations showed that the produced nanofibers have a substantial ability to take up water, in the range of 400-900%. Mechanical properties of the nanofiber mats were studied by tensile testing. Furthermore, they were found to be non-toxic by biocompatibility assays on mouse fibroblast (L929) cells. The obtained results have demonstrated that CS/PVA/Gel nanofiber mats, loaded with ZM essential oil, are promising alternatives to conventional wound dressings.

Polypyrrole/tannin biobased nanocomposite with enhanced electrochemical and physical properties.

In this research, tannin (TA) extracted from Acacia mangium and a cationic surfactant, cetyltrimethylammonium bromide (CTAB), were used to modify and enhance the physical and electrochemical properties of a polypyrrole (PPy) composite. Brunauer-Emmett-Teller (BET) analysis presented a higher degree of surface area and porosity for the PPy/TA/CTAB nanocomposite. A highly porous and rod like structure with a lumpy surface was observed for PPy/TA prepared in the presence of CTAB by Field Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscopy (TEM). Cyclic voltammograms of the modified SPE electrode using PPy/TA/CTAB displayed an enhanced current response compared to the electrode modified with only PPy or PPy/TA. Electrochemical Impedance Spectroscopy (EIS) exhibited a lower value of charge transfer resistance (R ct) and higher electron transfer for the modified electrode, making the nanocomposite a promising candidate for biosensor application.